summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-07-18Merge tag 'ep93xx-fixes-for-3.6' of git://github.com/RyanMallon/linux-ep93xx ↵Arnd Bergmann
into next/fixes-non-critical From Ryan Mallon <ryanm@ok-labs.com>: * tag 'ep93xx-fixes-for-3.6' of git://github.com/RyanMallon/linux-ep93xx: arm: ep93xx: Enable i2c support for ep9302 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18ARM:vt8500: Convert to use .restart and remove arch_reset()Tony Prisk
Removed system.h as it only contained an inline for arch_reset() Changed the existing board files to use .restart in there machine descriptions. Added device tree support for the restart controller. Device tree support for mach-vt8500 is still a work-in-progress. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsiStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Boot the board in EXTENDED_MODEVipul Kumar Samar
On spear320 device supported mode are: * AUTO_NET_SMII_MODE * AUTO_NET_MII_MODE * AUTO_EXP_MODE * SMALL_PRINTERS_MODE * EXTENDED_MODE spear320-evb board is designed for EXTENDED_MODE only, hence it does not boot correctly in current form where pinctrl part for some devices fail. Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Fix compatible stringVipul Kumar Samar
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: SPEAr13xx: Fix Interrupt bindingsVipul Kumar Samar
- Correct interrupt bindings for uart, ethernet and pmu. - Added interrupt binding for keyboard. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18Clk:spear6xx:Fix: Rename clk ids within predefined limitVipul Kumar Samar
The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk pll3_48m -> pll3_ Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18Clk:spear3xx:Fix: Rename clk ids within predefined limitVipul Kumar Samar
The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk ras_pll3_48m -> ras_pll3_ pll3_48m -> pll3_ Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'for-arm-soc-next' of ↵Arnd Bergmann
git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt From Lee Jones <lee.jones@linaro.org>: * 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ARM: ux500: Enable LED heartbeat functionality on Snowball ARM: ux500: Add support for input/ponkey into the db8500's Device Tree ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree ARM: ux500: Enable the user LED on Snowball via Device Tree ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c ARM: ux500: Remove unused i2c platform_data initialisation code ARM: ux500: Enable Device Tree support mmci for Snowball Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'ux500/fixes-3.5' into next/dtArnd Bergmann
prerequisite for ux500/dt branch
2012-07-17Merge branch 'next/devel-samsung' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim <kgene.kim@samsung.com>: This is general development for Samsung stuff for v3.6 * 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API ARM: EXYNOS: Add missing static storage class specifier in pmu.c file ARM: EXYNOS: Make combiner_init function static ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12 ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17ARM: EXYNOS: mark the DMA channel binding for SPI as preliminaryArnd Bergmann
Bindings for DMA channels are still under discussion and will change once this has been resolved. Therefore we mark them the newly added ones as preliminary. Let's hope nobody starts relying on them... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'next/dt-samsung' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim <kgene.kim@samsung.com>: It is for supporting spi dt for exynos4210 and exynos5250, and got the ack from Grant Likely for spi driver. Note: Since this is including spi driver changes, so it was made based on next/devel-dma-ops which touches same file, Samsung spi driver for avoiding bad conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controller spi: s3c64xx: add device tree support spi: s3c64xx: Remove the 'set_level' callback from controller data ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata function ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functions spi: s3c64xx: move controller information into driver data spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookup Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'samsung/dma' into next/dtArnd Bergmann
Required as a dependency for samsung/dt changes.
2012-07-17Merge branch 'next/board-samsung-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards From Kukjin Kim <kgene.kim@samsung.com>: The branch includes updating each Samsung boards such as SMDK4X12, Aquila, Goni and so on, and it is for audio platform device and supporting of HSOTG or framebuffer. * 'next/board-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add framebuffer support for SMDK4X12 ARM: EXYNOS: Add HSOTG support to SMDK4X12 ARM: S5PV210: Add audio platform device in Goni board ARM: S5PV210: Add audio platform device in Aquila board ARM: EXYNOS: Add audio platform device in SMDKV310 board ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'next/cleanup-samsung-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim <kgene.kim@samsung.com>: Here is second Samsung cleanup pull request for v3.6. * 'next/cleanup-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board ARM: S3C24XX: Remove unused GPIO definitions for port J ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API ARM: S3C24XX: Convert the PM code to gpiolib API ARM: S3C24XX: Convert QT2410 board file to the gpiolib API ARM: S3C24XX: Convert SMDK board file to the gpiolib API ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge tag 'imx-clk' of git://git.pengutronix.de/git/imx/linux-2.6 into next/clkArnd Bergmann
From Sascha Hauer <s.hauer@pengutronix.de>: i.MX clk noncritical fixes and updates * tag 'imx-clk' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: clk-imx31: Fix clock id for rnga driver ARM: imx: add missing item to the list of clock event modes ARM: i.MX5x CSPI: Fixed clock name for CSPI ARM: i.MX5x clocks: Fix GPT clocks ARM: i.MX5x clocks: Fix parent for PWM clocks ARM: i.MX5x clocks: Add EPIT support ARM: mx27: Reenable silicon version print ARM: clk-imx27: Fix rtc clock id Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'mvebu/newsoc' into next/newsocArnd Bergmann
One more addition from Thomas Petazzoni: * mvebu/newsoc: arm: mvebu: generate DTBs for supported SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17arm: mvebu: generate DTBs for supported SoCsThomas Petazzoni
Add the necessary dtb-$(CONFIG_...) entries so that "make dtbs" generates the Device Tree Blobs that correspond to the selected mvebu SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'clps711x/cleanup' into next/cleanupArnd Bergmann
Patches from Alexander Shiyan <shc_work@mail.ru>: * clps711x/cleanup: ARM: clps711x: Remove the setting of the time ARM: clps711x: Removed superfluous transform virt_to_bus and related functions ARM: clps711x/p720t: Replace __initcall by .init_early call Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17ARM: clps711x: Remove the setting of the timeAlexander Shiyan
This patch fixes "bug: interrupts were enabled early" due to do_settimeofday() which used in common code for clps711x-platform. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17ARM: clps711x: Removed superfluous transform virt_to_bus and related functionsAlexander Shiyan
This override does not allow support for multiple machines in a single core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17ARM: clps711x/p720t: Replace __initcall by .init_early callAlexander Shiyan
Since we are trying to do to support multiple machines in a single kernel, we need to eliminate the use of __initcall to be used for all machines. Using .init_early call solves this problem. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17gpio/mxc: use the edge_sel feature if availableBenoît Thébaudeau
Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping fixes from Marek Szyprowski: "Another set of minor fixups for recently merged Contiguous Memory Allocator and ARM DMA-mapping changes. Those patches fix mysterious crashes on systems with CMA and Himem enabled as well as some corner cases caused by typical off-by-one bug." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: modify condition check while freeing pages mm: cma: fix condition check when setting global cma area mm: cma: don't replace lowmem pages with highmem
2012-07-17ARM: EXYNOS: Add G2D related clock entries for SMDK4X12Sachin Kamat
Adds G2D related clock entries for SMDK4X12 boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17ARM: EXYNOS: Move G2D clock entries to clock-exynos4210.c fileSachin Kamat
G2D clock registers are different in EXYNOS4210 and EXYNOS4X12 SoCs. Hence moving the SoC specific G2D clock entries from common clock file (clock-exynos4.c) to EXYNOS4210 specific clock file (clock-exynos4210.c). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16ARM: imx: clk-imx31: Fix clock id for rnga driverFabio Estevam
Fix clock id for rnga driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16ARM: imx: add missing item to the list of clock event modesUwe Kleine-König
This prevents an out-of-bounds access to the clock_event_mode_label when debugging. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16ARM: i.MX5x CSPI: Fixed clock name for CSPIAlexander Shiyan
This patch also includes fix CSPI ID for i.MX53. ID should be 2, because IDs 0 and 1 are occupied by eCSPI. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16ARM: i.MX5x clocks: Fix GPT clocksAlexander Shiyan
This patch fix incorrect defined bits for GPT clocks according to datasheet. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16ARM: i.MX5x clocks: Fix parent for PWM clocksAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16ARM: i.MX5x clocks: Add EPIT supportAlexander Shiyan
This patch adds support for Enhanced Periodic Interrupt Timer (EPIT) to clock subsystem. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-16Merge 3.5-rc7 into usb-nextGreg Kroah-Hartman
This resolves the merge issue with the drivers/usb/host/ehci-omap.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16ARM: dma-mapping: modify condition check while freeing pagesPrathyush K
WARNING: at mm/vmalloc.c:1471 __iommu_free_buffer+0xcc/0xd0() Trying to vfree() nonexistent vm area (ef095000) Modules linked in: [<c0015a18>] (unwind_backtrace+0x0/0xfc) from [<c0025a94>] (warn_slowpath_common+0x54/0x64) [<c0025a94>] (warn_slowpath_common+0x54/0x64) from [<c0025b38>] (warn_slowpath_fmt+0x30/0x40) [<c0025b38>] (warn_slowpath_fmt+0x30/0x40) from [<c0016de0>] (__iommu_free_buffer+0xcc/0xd0) [<c0016de0>] (__iommu_free_buffer+0xcc/0xd0) from [<c0229a5c>] (exynos_drm_free_buf+0xe4/0x138) [<c0229a5c>] (exynos_drm_free_buf+0xe4/0x138) from [<c022b358>] (exynos_drm_gem_destroy+0x80/0xfc) [<c022b358>] (exynos_drm_gem_destroy+0x80/0xfc) from [<c0211230>] (drm_gem_object_free+0x28/0x34) [<c0211230>] (drm_gem_object_free+0x28/0x34) from [<c0211bd0>] (drm_gem_object_release_handle+0xcc/0xd8) [<c0211bd0>] (drm_gem_object_release_handle+0xcc/0xd8) from [<c01abe10>] (idr_for_each+0x74/0xb8) [<c01abe10>] (idr_for_each+0x74/0xb8) from [<c02114e4>] (drm_gem_release+0x1c/0x30) [<c02114e4>] (drm_gem_release+0x1c/0x30) from [<c0210ae8>] (drm_release+0x608/0x694) [<c0210ae8>] (drm_release+0x608/0x694) from [<c00b75a0>] (fput+0xb8/0x228) [<c00b75a0>] (fput+0xb8/0x228) from [<c00b40c4>] (filp_close+0x64/0x84) [<c00b40c4>] (filp_close+0x64/0x84) from [<c0029d54>] (put_files_struct+0xe8/0x104) [<c0029d54>] (put_files_struct+0xe8/0x104) from [<c002b930>] (do_exit+0x608/0x774) [<c002b930>] (do_exit+0x608/0x774) from [<c002bae4>] (do_group_exit+0x48/0xb4) [<c002bae4>] (do_group_exit+0x48/0xb4) from [<c002bb60>] (sys_exit_group+0x10/0x18) [<c002bb60>] (sys_exit_group+0x10/0x18) from [<c000ee80>] (ret_fast_syscall+0x0/0x30) This patch modifies the condition while freeing to match the condition used while allocation. This fixes the above warning which arises when array size is equal to PAGE_SIZE where allocation is done using kzalloc but free is done using vfree. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-07-15Merge tag 'v3.5-rc7' into regulator-driversMark Brown
Linux 3.5-rc7
2012-07-14Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Samsung SoC fixes from Arnd Bergmann. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers
2012-07-14ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platformsThomas Abraham
Add device nodes for the three instances of spi controllers in EXYNOS5 platforms and enable instance SPI 1 for SMDK5250 board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5Thomas Abraham
Add the platform bits which are required to support SPI controllers. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: EXYNOS: Add spi clock support for EXYNOS5Thomas Abraham
Add support for clock instances for each spi controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> [kgene.kim@samsung.com: changed the name of clk for consensus] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platformsThomas Abraham
Add device nodes for the three instances of spi controllers in EXYNOS4 platforms. Enable instance SPI 2 for SMDKV310 board and disable all spi instances for Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4Thomas Abraham
Add the platform bits which are required to support SPI controllers. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clockThomas Abraham
The sclk_spi clock is derived currently from the first level divider (MMCx_RATIO) which is incorrect. The output of the first level clock is divided by a second level divider (MMCx_PRE_RATIO), the output of which is used as the spi bus clock (sclk_spi). Fix the clock hierarchy issues for the sclk_spi clock. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> [kgene.kim@samsung.com: changed the name of clk for consensus] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13Merge branch 'vexpress-v3.5-rc6' of ↵Arnd Bergmann
git://git.linaro.org/people/pawelmoll/linux into next/soc From Pawel Moll <pawel.moll@arm.com>: Versatile Express updates for v3.6 * 'vexpress-v3.5-rc6' of git://git.linaro.org/people/pawelmoll/linux: ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-13Merge tag 'davinci-v3.6-dt' of ↵Arnd Bergmann
git://gitorious.org/linux-davinci/linux-davinci into next/dt From Sekhar Nori <nsekhar@ti.com>: DaVinci DT support Add DT support for DaVinci cp_intc interrupt controller * tag 'davinci-v3.6-dt' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: cp_intc: Add OF support for TI interrupt controller ARM: davinci: add runtime PM support for clock management ARM: davinci: cp_intc: Add irq domain support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-13ARM: vexpress: Config option for early printk consolePawel Moll
Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tilePawel Moll
This patch adds Device Tree file for the CoreTile Express A15x2 A7x3 (V2P-CA15_CA7). Note that the A7 cpu nodes are commented out, as the big.LITTLE-relevant patches are not upstreamed yet. Till this time one can use the board with two A15 cores only, keeping the A7s in reset by adding the following setting to the board.txt file in Versatile Express configuration tree: SCC: 0x018 0x00001FFF Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addressesPawel Moll
... to enable use of LPAE, which extends physical address space to 40 bits. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add fixed regulator for SMSCPawel Moll
SMSC driver requires "vdd33a" and "vddvario" regulator supplies now. Add fixed regulator describing 3V3 power line (in both motherboard's Device Trees and the non-DT code) and force fixed regulator config option if regulators framework is enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS filesPawel Moll
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
generated by cgit (git 2.34.1) at 2025-07-16 02:57:12 +0000