| Age | Commit message (Collapse) | Author |
|---|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the thermal sensor (tsens) on the MSM8960 by copying and
modifying the relevant nodes from the APQ8064 dtsi. These changes enable
thermal management.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250227-expressatt-tsens-v4-2-d70afa5a1fd0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Copy bam nodes from qcom-ipq8064.dtsi and change
the reg values to match msm8960.
Co-developed-by: Sam Day <me@samcday.com>
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213-expressatt-bam-v3-1-0ff338f488b2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and
shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU
bring-up fails:
smp: Bringing up secondary CPUs ...
CPU1: failed to come online
CPU2: failed to come online
CPU3: failed to come online
smp: Brought up 1 node, 1 CPU
Fix this by adding the missing alignment directive.
Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss")
Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Introduce the devicetree for the Plymovent AQM board
(stm32mp151c-plyaqm), based on the STM32MP151 SoC.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinmux groups required for the Plymovent AQM board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-4-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Unused 'static const' variables cause a warning when building with
W=1, and imx53_suspend_sz has a definition for this as an
alternative when CONFIG_SUSPEND is disabled:
In file included from arch/arm/mach-imx/cpu.c:9:
arch/arm/mach-imx/common.h:101:18: error: 'imx53_suspend_sz' defined but not used [-Werror=unused-const-variable=]
It's still referenced though, so mark it as __maybe_unused, so
the one user can address the dummy copy and other files that include
the header don't produce a warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible
to fix the following dt-schema warning:
failed to match any schema with compatible: ['pca9554']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to mxc-nand.yaml, the correct node name must be
'nand-controller'.
Change it accordingly to fix the following dt-schema warning:
$nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,dspi.yaml the expected order for describing the dmas
and dma-names properties is "tx" first, followed by "rx".
Adjust it acordingly to fix the following dt-schema warnings:
spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader may add MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions. Remove #size-cells from MTD node
because this is deprecated.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This matches the real hardware and allows to remove
the virtual 3.3V regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is a fixed 3.3V rail supplying several hardware on SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
All modules that need CONFIG_LIBCRC32C already select it, so there is no
need to bother users about the option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250304230712.167600-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All modules that need CONFIG_CRC7 already select it, so there is no need
to bother users about the option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250304230712.167600-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip interrupt and reset lines.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250302152605.54792-1-marex@denx.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Replace the number 2 with the appropriate numerical constant defined in
dt-bindings/interrupt-controller/irq.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/20250310122402.8795-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
__module_text_address() can be invoked within a RCU section, there is no
requirement to have preemption disabled.
Replace the preempt_disable() section around __module_text_address()
with RCU.
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-17-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Apparently, ASUS's own firmware also
describes them incorrectly. Correct them to what is seen on the chassis.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: b116239094d8 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250304-for-broadcom-fix-rt-ac3200-switch-ports-v1-1-7e249a19a13e@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Correct them.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: 961dedc6b4e4 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250303-for-broadcom-fix-rt-ac5300-switch-ports-v1-1-e058856ef4d3@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.
So drop this property to allow the use of the vDSO version of
clock_gettime.
Link: https://github.com/raspberrypi/tools/pull/113
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:
armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bind al3000a illuminance sensor found in ASUS TF101
Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250217140336.107476-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bind DSI devices and MIPI calibration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-6-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDA device binding.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add ARM PMU node for Tegra114 like it is done for Tegra30 and Tegra124.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
ARM: dts: renesas: r9a06g032: Fix UART dma channel order
arm64: dts: renesas: rzg2: Add boot phase tags
arm64: dts: renesas: rcar: Add boot phase tags
ARM: dts: renesas: rcar-gen2: Add boot phase tags
arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders
arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture
arm64: dts: renesas: Add initial support for MYIR Remi Pi
arm64: dts: renesas: r9a08g045: Add OPP table
arm64: dts: renesas: r9a09g057: Enable SYS node
arm64: dts: renesas: r9a09g047: Add SYS node
arm64: dts: renesas: r9a08g045: Enable SYS node
arm64: dts: renesas: r8a779f0: Disable rswitch ports by default
arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch
arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch
arm64: dts: renesas: s4sk: Access rswitch ports via phandles
arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles
...
Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:
arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'
This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.
Fixes: 55b447744389 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ")
Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When update_mmu_cache_range() is called by update_mmu_cache(), the vmf
parameter is NULL, which will cause a NULL pointer dereference issue in
adjust_pte():
Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read
Hardware name: Atmel AT91SAM9
PC is at update_mmu_cache_range+0x1e0/0x278
LR is at pte_offset_map_rw_nolock+0x18/0x2c
Call trace:
update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec
remove_migration_pte from rmap_walk_file+0xcc/0x130
rmap_walk_file from remove_migration_ptes+0x90/0xa4
remove_migration_ptes from migrate_pages_batch+0x6d4/0x858
migrate_pages_batch from migrate_pages+0x188/0x488
migrate_pages from compact_zone+0x56c/0x954
compact_zone from compact_node+0x90/0xf0
compact_node from kcompactd+0x1d4/0x204
kcompactd from kthread+0x120/0x12c
kthread from ret_from_fork+0x14/0x38
Exception stack(0xc0d8bfb0 to 0xc0d8bff8)
To fix it, do not rely on whether 'ptl' is equal to decide whether to hold
the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is
enabled. In addition, if two vmas map to the same PTE page, there is no
need to hold the pte lock again, otherwise a deadlock will occur. Just
add the need_lock parameter to let adjust_pte() know this information.
Link: https://lkml.kernel.org/r/20250217024924.57996-1-zhengqi.arch@bytedance.com
Fixes: fc9c45b71f43 ("arm: adjust_pte() use pte_offset_map_rw_nolock()")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Closes: https://lore.kernel.org/lkml/CAM1KZSmZ2T_riHvay+7cKEFxoPgeVpHkVFTzVVEQ1BO0cLkHEQ@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Set ADC trigger edge type property as interrupt edge rising value.
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Link: https://lore.kernel.org/r/20250304-sama7g5-hw-trigger-enable-v1-1-61b5618285f0@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use
any of its symbols). Remove the header and make the driver stop using the
config structure.
[ tglx: Mop up coding style ]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl
|
|
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-1-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add watchdog timer support for SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/05785a34b9181b7debb57c1896cc733bd3088c56.1740675317.git.Ryan.Wanner@microchip.com
[claudiu.beznea: fixed conflict]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
