summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2025-02-26powerpc: Define config option for processors with broadcast TLBIEPaul Mackerras
Power ISA v3.0 (and later) implementations in the Linux Compliancy Subset and lower are not required to implement broadcast TLBIE, and in fact Microwatt doesn't. To avoid the need to specify "disable_tlbie" on the kernel command line on SMP Microwatt systems, this defines a config option that asserts that the platform implements broadcast TLBIE. This option is selected by the pseries and powernv platforms, but not by microwatt. Note that this option is only relevant when the radix MMU is being used, so platforms without a radix MMU don't need it. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/Z5xtvdozEfEmRyeI@thinks.paulus.ozlabs.org
2025-02-26powerpc/microwatt: Define an idle power-save functionPaul Mackerras
This uses the 'wait' instruction to pause instruction execution when idle until an interrupt occurs. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/Z5xtl1m_Gqc-HLjY@thinks.paulus.ozlabs.org
2025-02-26powerpc/microwatt: Device-tree updatesPaul Mackerras
Microwatt now implements ISA v3.1 (SFFS compliancy subset), including prefixed instructions, scv/rfscv, and the FSCR, HFSCR, TAR, and CTRL registers. The privileged mode of operation is now hypervisor mode and there is no privileged non-hypervisor mode; the MSR[HV] bit is forced to 1. Besides updating the ibm,powerpc-cpu-features property to reflect the above, this also makes the following changes relating to peripheral devices: - Add gpio controller. - Remove high-speed property from SD controller, for the case where the interface is connected through 200 ohm protection resisters. - Put an alias for the ethernet in /chosen. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/Z5xtdGSacrWz7swi@thinks.paulus.ozlabs.org
2025-02-26powerpc/microwatt: Select COMMON_CLK in order to get the clock frameworkPaul Mackerras
This is to allow us to select Litex MMC host controller driver, which drives the litesdcard gateware. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/Z5xtT47QsnFpxc5E@thinks.paulus.ozlabs.org
2025-02-26powerpc: Remove UDBG_RTAS_CONSOLEMichael Ellerman
The IBM Cell blade support was the last user of UDBG_RTAS_CONSOLE. Although it's still possible to build it via PPC_EARLY_DEBUG_UDBG_RTAS_CONSOLE, AFAIK it's not useful on any other platfoms, because only Cell and JS20 era machines provided the RTAS get/put-term-char functions. If anyone is using it or needs it we can always resurrect it from git. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-19-mpe@ellerman.id.au
2025-02-26powerpc/io: Use standard barrier macros in io.cMichael Ellerman
io.c uses open-coded barriers. Update it to use the equivalent but in macro form. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-18-mpe@ellerman.id.au
2025-02-26powerpc/io: Rename _insw_ns() etc.Michael Ellerman
The "_ns" suffix was "historical" in 2006, finally remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-17-mpe@ellerman.id.au
2025-02-26powerpc/io: Use generic raw accessorsMichael Ellerman
The raw accessors are identical to the generic versions, use the generic versions. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-16-mpe@ellerman.id.au
2025-02-26powerpc/io: Spell-out PCI_IO_ADDRMichael Ellerman
PCI_IO_ADDR is a ppc-ism, which obscures the fact that some of the powerpc accessors are identical to the generic ones. So remove it and spell out the type fully. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-15-mpe@ellerman.id.au
2025-02-26powerpc/io: Wrap port calculation in a macroMichael Ellerman
The calculation of the IO port is repeated several times, wrap it in a macro, in particular to avoid spelling out the cast multiple times. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-14-mpe@ellerman.id.au
2025-02-26powerpc/io: Remove unnecessary indirectionMichael Ellerman
Some of the __do_xxx() defines do nothing useful, they just existed to make the previous hooking macros work. So remove them. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-13-mpe@ellerman.id.au
2025-02-26powerpc/io: Unhook MMIO accessorsMichael Ellerman
Now that PPC_INDIRECT_MMIO is removed, it's not possible/necessary to hook any of the "memory" accessors, so turn them back into regular static inlines, and restrict the hooking mechanism to the "pio" accessors only. Move the #defines that signal each routine is implemented next to the implementation, and update the out-of-date comment. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-12-mpe@ellerman.id.au
2025-02-26powerpc/io: Remove PCI_FIX_ADDRMichael Ellerman
Now that PPC_INDIRECT_MMIO is removed, PCI_FIX_ADDR does nothing, so remove it. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-11-mpe@ellerman.id.au
2025-02-26powerpc/io: Remove PPC_INDIRECT_MMIOMichael Ellerman
The Cell blade support was the last user of PPC_INDIRECT_MMIO, so it can now be removed. PPC_INDIRECT_PIO is still used by Power8 powernv, so it needs to remain. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-10-mpe@ellerman.id.au
2025-02-26powerpc/io: Remove PPC_IO_WORKAROUNDSMichael Ellerman
The Cell blade support was the last user of PPC_IO_WORKAROUNDS, so they can now be removed. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-9-mpe@ellerman.id.au
2025-02-26powerpc: Remove PPC_OF_PLATFORM_PCIMichael Ellerman
The Cell blade support was the last user of PPC_OF_PLATFORM_PCI, so remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-8-mpe@ellerman.id.au
2025-02-26powerpc: Remove DCR_MMIO and the DCR generic layerMichael Ellerman
The Cell blade support was the last user of DCR_MMIO, so it can now be removed. That only leaves DCR_NATIVE, meaning the DCR generic layer which allows using either DCR_NATIVE or DCR_MMIO is also unnecessary, remove it too. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-7-mpe@ellerman.id.au
2025-02-26powerpc/xmon: Remove SPU debug and disassemblyMichael Ellerman
Now that the IBM Cell Blade support is removed, the xmon SPU support is effectively unusable. That is because PS3 doesn't implement udbg_getc which is required to send input to xmon. So remove the xmon SPU support. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-6-mpe@ellerman.id.au
2025-02-26powerpc/cell: Remove CBE_CPUFREQ_SPU_GOVERNORMichael Ellerman
Although this driver is still buildable, it can't actually do anything in practice now that the low-level cpufreq driver for Cell has been disabled due to the removal of CBE_RAS. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-5-mpe@ellerman.id.au
2025-02-26powerpc: Remove IBM_CELL_BLADE & SPIDER_NET referencesMichael Ellerman
The symbols are no longer selectable so remove references to them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-4-mpe@ellerman.id.au
2025-02-26powerpc: Remove PPC_PMI and driverMichael Ellerman
CONFIG_PPC_PMI is no longer selectable now that PPC_IBM_CELL_BLADE has been removed, via the dependency on PPC_IBM_CELL_POWERBUTTON. So remove it and the driver, and the pmi.h header which it was the only user of. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-3-mpe@ellerman.id.au
2025-02-26powerpc: Remove some Cell leftoversMichael Ellerman
Now that CONFIG_PPC_CELL_NATIVE is removed, iommu_fixed_is_weak will always be false, so remove it entirely. Also remove a hack/quirk in the HTAB code that was only used on Cell. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-2-mpe@ellerman.id.au
2025-02-26powerpc/cell: Remove support for IBM Cell BladesMichael Ellerman
IBM Cell Blades used the Cell processor and the "blade" server form factor. They were sold as models QS20, QS21 & QS22 from roughly 2006 to 2012 [1]. They were used in a few supercomputers (eg. Roadrunner) that have since been dismantled, and were not that widely used otherwise. Until recently I still had a working QS22, which meant I was able to keep the platform support working, but unfortunately that machine has now died. I'm not aware of any users. If there is a user that wants to keep the upstream support working, we can look at bringing some of the code back as appropriate. See previous discussion at [2]. Remove the top-level config symbol PPC_IBM_CELL_BLADE, and then the dependent symbols PPC_CELL_NATIVE, PPC_CELL_COMMON, CBE_RAS, PPC_IBM_CELL_RESETBUTTON, PPC_IBM_CELL_POWERBUTTON, CBE_THERM, and AXON_MSI. Then remove the associated C files and headers, and trim unused header content (some is shared with PS3). Note that PPC_CELL_COMMON sounds like it would build code shared with PS3, but it does not. It's a relic from when code was shared between the Blade support and QPACE support. Most of the primary authors already have CREDITS entries, with the exception of Christian, so add one for him. [1]: https://www.theregister.com/2011/06/28/ibm_kills_qs22_blade [2]: https://lore.kernel.org/linuxppc-dev/60581044-df82-40ad-b94c-56468007a93e@app.fastmail.com Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-1-mpe@ellerman.id.au
2025-02-26powerpc/static_call: Implement inline static callsChristophe Leroy
Implement inline static calls: - Put a 'bl' to the destination function ('b' if tail call) - Put a 'nop' when the destination function is NULL ('blr' if tail call) - Put a 'li r3,0' when the destination is the RET0 function and not a tail call. If the destination is too far (over the 32Mb limit), go via the trampoline. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/3dbd0b2ba577c942729235d0211d04a406653d81.1733245362.git.christophe.leroy@csgroup.eu
2025-02-26powerpc: Prepare arch_static_call_transform() for supporting inline static callsChristophe Leroy
Reorganise arch_static_call_transform() in order to ease the support of inline static calls in following patch: - remove 'target' to nhide whether it is a 'return 0' or not. - Don't bail out if 'tramp' is NULL, just do nothing until next patch. Note that 'target' was 'tramp + PPC_SCT_RET0', is_short was perforce true. So in the 'if (func && !is_short)' leg, target was perforce equal to 'func'. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/7a8b9245e773307c315c2548a4c6cad570ac2648.1733245362.git.christophe.leroy@csgroup.eu
2025-02-24powerpc/xmon: simplify xmon_batch_next_cpu()Yury Norov
The function opencodes for_each_cpu_wrap() macro. As a loop termination condition it uses cpumask_empty(), which is O(N), and it makes the whole algorithm O(N^2). Switching to for_each_cpu_wrap() simplifies the logic, and makes the algorithm linear. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2025-02-24arch/powerpc: Remove unused function icp_native_cause_ipi_rm()Gautam Menghani
Remove icp_native_cause_ipi_rm() as it has no callers since commit 53af3ba2e819("KVM: PPC: Book3S HV: Allow guest exit path to have MMU on") Signed-off-by: Gautam Menghani <gautam@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250101134251.436679-1-gautam@linux.ibm.com
2025-02-24powerpc/time: Define div128_by_32() static and __initChristophe Leroy
div128_by_32() used to be called from outside time.c in the old days but since v2.6.15 it hasn't been used outside time.c $ git grep div128_by_32 v2.6.14 v2.6.14:arch/ppc64/kernel/iSeries_setup.c: div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres); v2.6.14:arch/ppc64/kernel/pmac_time.c: div128_by_32( 1024*1024, 0, tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, v2.6.14:include/asm-ppc64/time.h:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, $ git grep div128_by_32 v2.6.15 v2.6.15:arch/powerpc/kernel/time.c: div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres); v2.6.15:arch/powerpc/kernel/time.c:void div128_by_32(u64 dividend_high, u64 dividend_low, v2.6.15:include/asm-powerpc/time.h:extern void div128_by_32(u64 dividend_high, u64 dividend_low, Move it above its only caller which is time_init() and define it static and __init. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/50810349bf1eee378fbeab72a36e4b6553a60c3d.1738749246.git.christophe.leroy@csgroup.eu
2025-02-24powerpc/ipic: Stop printing address of registersChristophe Leroy
The following line appears at boot: IPIC (128 IRQ sources) at (ptrval) This is pointless so remove the printing of the virtual address and replace it by matching physical address. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/ecffb21d88405f99e7ffc906a733396c57c36d50.1736405302.git.christophe.leroy@csgroup.eu
2025-02-24powerpc/32: Stop printing Kernel virtual memory layoutChristophe Leroy
Printing of Kernel virtual memory layout was added for debug purpose by commit f637a49e507c ("powerpc: Minor cleanups of kernel virt address space definitions") For security reasons, don't display the kernel's virtual memory layout. Other architectures have removed it through following commits. Commit 071929dbdd86 ("arm64: Stop printing the virtual memory layout") Commit 1c31d4e96b8c ("ARM: 8820/1: mm: Stop printing the virtual memory layout") Commit 31833332f798 ("m68k/mm: Stop printing the virtual memory layout") Commit fd8d0ca25631 ("parisc: Hide virtual kernel memory layout") Commit 681ff0181bbf ("x86/mm/init/32: Stop printing the virtual memory layout") Commit 681ff0181bbf ("x86/mm/init/32: Stop printing the virtual memory layout") thought x86 was the last one, but in reality powerpc/32 still had it. So remove it now on powerpc/32 as well. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Kees Cook <kees@kernel.org> [Maddy: Added "Commit" in commit message to avoid checkpatch error] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/430bc8c1f2ff2eb9224b04450e22db472b0b9fa9.1736361630.git.christophe.leroy@csgroup.eu
2025-02-24powerpc/vmlinux: Remove etext, edata and endChristophe Leroy
etext is not used anymore since commit 843a1ffaf6f2 ("powerpc/mm: use core_kernel_text() helper") edata and end have not been used since the merge of arch/ppc/ and arch/ppc64/ Remove the three and remove macro PROVIDE32. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/d1686d36cdd6b9d681e7ee4dd677c386d43babb1.1736332415.git.christophe.leroy@csgroup.eu
2025-02-24powerpc/44x: Declare primary_uic static in uic.cChristophe Leroy
primary_uic is not used outside uic.c, declare it static. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411101746.lD8YdVzY-lkp@intel.com/ Fixes: e58923ed1437 ("[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/0e11233d30333610ab460b3a1fd0f43c3a51e34d.1736331884.git.christophe.leroy@csgroup.eu
2025-02-22crypto: lib/Kconfig - Fix lib built-in failure when arch is modularHerbert Xu
The HAVE_ARCH Kconfig options in lib/crypto try to solve the modular versus built-in problem, but it still fails when the the LIB option (e.g., CRYPTO_LIB_CURVE25519) is selected externally. Fix this by introducing a level of indirection with ARCH_MAY_HAVE Kconfig options, these then go on to select the ARCH_HAVE options if the ARCH Kconfig options matches that of the LIB option. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501230223.ikroNDr1-lkp@intel.com/ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-02-21sysv: Remove the filesystemJan Kara
Since 2002 (change "Replace BKL for chain locking with sysvfs-private rwlock") the sysv filesystem was doing IO under a rwlock in its get_block() function (yes, a non-sleepable lock hold over a function used to read inode metadata for all reads and writes). Nobody noticed until syzbot in 2023 [1]. This shows nobody is using the filesystem. Just drop it. [1] https://lore.kernel.org/all/0000000000000ccf9a05ee84f5b0@google.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20250220163940.10155-2-jack@suse.cz Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-21make use of anon_inode_getfile_fmode()Al Viro
["fallen through the cracks" misc stuff] A bunch of anon_inode_getfile() callers follow it with adjusting ->f_mode; we have a helper doing that now, so let's make use of it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250118014434.GT1977892@ZenIV Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-21powerpc/vdso: Switch to generic storage implementationThomas Weißschuh
The generic storage implementation provides the same features as the custom one. However it can be shared between architectures, making maintenance easier. Co-developed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-14-13a4669dfc8c@linutronix.de
2025-02-21vdso: Rename included MakefileThomas Weißschuh
As the Makefile is included into other Makefiles it can not be used to define objects to be built from the current source directory. However the generic datastore will introduce such a local source file. Rename the included Makefile so it is clear how it is to be used and to make room for a regular Makefile in lib/vdso/. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
2025-02-21powerpc/perf/hv-24x7: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-5-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21powerpc/powernv/opal: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-4-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21powerpc/powernv/ultravisor: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-3-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21powerpc/secvar: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-2-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21powerpc/secvar: Mark __init functions as suchThomas Weißschuh
The setup functions are only called during the init phase of the kernel. They can be discarded and their memory reused after that. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-1-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-18powerpc/watchdog: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/099ebf6d352094a56e22fdfe76582b50f8fd6029.1738746821.git.namcao@linutronix.de
2025-02-18KVM: PPC: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/a58c4f16b1cfba13f96201fda355553850a97562.1738746821.git.namcao@linutronix.de
2025-02-12fs: add open_tree_attr()Christian Brauner
Add open_tree_attr() which allow to atomically create a detached mount tree and set mount options on it. If OPEN_TREE_CLONE is used this will allow the creation of a detached mount with a new set of mount options without it ever being exposed to userspace without that set of mount options applied. Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-12powerpc/code-patching: Fix KASAN hit by not flagging text patching area as ↵Christophe Leroy
VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f08816b ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/ Fixes: 37bc3e5fd764 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu
2025-02-11powerpc/pseries/iommu: memory notifier incorrectly adds TCEs for pmemoryGaurav Batra
iommu_mem_notifier() is invoked when RAM is dynamically added/removed. This notifier call is responsible to add/remove TCEs from the Dynamic DMA Window (DDW) when TCEs are pre-mapped. TCEs are pre-mapped only for RAM and not for persistent memory (pmemory). For DMA buffers in pmemory, TCEs are dynamically mapped when the device driver instructs to do so. The issue is 'daxctl' command is capable of adding pmemory as "System RAM" after LPAR boot. The command to do so is - daxctl reconfigure-device --mode=system-ram dax0.0 --force This will dynamically add pmemory range to LPAR RAM eventually invoking iommu_mem_notifier(). The address range of pmemory is way beyond the Max RAM that the LPAR can have. Which means, this range is beyond the DDW created for the device, at device initialization time. As a result when TCEs are pre-mapped for the pmemory range, by iommu_mem_notifier(), PHYP HCALL returns H_PARAMETER. This failed the command, daxctl, to add pmemory as RAM. The solution is to not pre-map TCEs for pmemory. Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250130183854.92258-1-gbatra@linux.ibm.com
2025-02-11powerpc/pseries/iommu: create DDW for devices with DMA mask less than 64-bitsGaurav Batra
Starting with PAPR level 2.13, platform supports placing PHB in limited address mode. Devices that support DMA masks less that 64-bit but greater than 32-bits are placed in limited address mode. In this mode, the starting DMA address returned by the DDW is 4GB. When the device driver calls dma_supported, with mask less then 64-bit, the PowerPC IOMMU driver places PHB in the Limited Addressing Mode before creating DDW. Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250108164814.73250-1-gbatra@linux.ibm.com
2025-02-11powerpc/pseries: Export hardware trace macro dump via debugfsAbhishek Dubey
This patch adds debugfs interface to export Hardware Trace Macro (HTM) function data in a LPAR. New hypervisor call "H_HTM" has been defined to setup, configure, control and dump the HTM data. This patch supports only dumping of HTM data in a LPAR. New debugfs folder called "htmdump" has been added under /sys/kernel/debug/arch path which contains files need to pass required parameters for the H_HTM dump function. New Kconfig option called "CONFIG_HTMDUMP" is added in platform/pseries for the same. With this module loaded, list of files in debugfs path /sys/kernel/debug/powerpc/htmdump coreindexonchip htmtype nodalchipindex nodeindex trace Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com> Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250113164039.302017-2-adubey@linux.ibm.com
2025-02-11powerpc/pseries: Macros and wrapper functions for H_HTM callAbhishek Dubey
Define macros and wrapper functions to handle H_HTM (Hardware Trace Macro) hypervisor call. H_HTM is new HCALL added to export data from Hardware Trace Macro (HTM) function. Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com> Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250113164039.302017-1-adubey@linux.ibm.com
generated by cgit (git 2.34.1) at 2025-07-17 23:55:39 +0000