summaryrefslogtreecommitdiff
path: root/arch/riscv/boot/dts
AgeCommit message (Collapse)Author
2024-09-02riscv: dts: sophgo: Add sdhci0 configuration for Huashan PiInochi Amaoto
Add configuration for sdhci0 for Huashan Pi to support sd card. Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/r/IA1PR20MB49538AC83C5DB314D10F7186BBA92@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-09-02riscv: dts: sophgo: cv18xx: add DMA controllerInochi Amaoto
Add DMA controller dt node for CV18XX/SG200x. Link: https://lore.kernel.org/r/IA1PR20MB4953BD73E12B8A1CDBD9E1A3BB042@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-08-08riscv: dts: thead: change TH1520 SPI node to use clock controllerDrew Fustini
Change the clock property in the TH1520 SPI controller node to a clock provided by AP_SYS clock controller. Remove spi_clk fixed clock reference from BeagleV Ahead and LPI4a dts. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-08-08riscv: dts: thead: add clock to TH1520 gpio nodesDrew Fustini
Add clock property to TH1520 gpio controller nodes. These clock gates refer to corresponding enable bits in the peripheral clock gate control register. Refer to register PERI_CLK_CFG in section 4.4.2.2.52 of the TH1520 System User Manual. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-08-08riscv: dts: thead: update TH1520 dma and timer nodes to use clock controllerDrew Fustini
Change the dma-controller and timer nodes to use the APB clock provided by the AP_SUBSYS clock controller. Remove apb_clk reference from BeagleV Ahead and LPI4a dts. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-08-08riscv: dts: thead: change TH1520 mmc nodes to use clock controllerDrew Fustini
Change the clock property in the TH1520 mmc controller nodes to a clock provided by AP_SYS clock controller. Remove sdhci fixed clock reference from BeagleV Ahead and LPI4a dts. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-08-08riscv: dts: thead: change TH1520 uart nodes to use clock controllerDrew Fustini
Change the clock property in TH1520 uart nodes to a clock provided by AP_SUBSYS clock controller. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-08-08riscv: dts: thead: Add TH1520 AP_SUBSYS clock controllerDrew Fustini
Add node for the AP_SUBSYS clock controller on the T-Head TH1520 SoC. Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-07-31riscv: dts: thead: add basic spi nodeKanak Shilledar
created spi0 node with fixed clock. the spi0 node uses synopsis designware driver and has the following compatible "snps,dw-apb-ssi". the spi0 node is connected to a SPI NOR flash pad which is left unpopulated on the back side of the board. Acked-by: Drew Fustini <drew@pdp7.com> Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com> Signed-off-by: Drew Fustini <drew@pdp7.com>
2024-07-19Merge tag 'tty-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits) Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports serial: core: Add serial_base_match_and_update_preferred_console() printk: Add match_devname_and_update_preferred_console() serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT dt-bindings: serial: sc16is7xx: add reset-gpios dt-bindings: serial: vt8500-uart: convert to json-schema serial: 8250_platform: Explicitly show we initialise ISA ports only once tty: add missing MODULE_DESCRIPTION() macros dt-bindings: serial: mediatek,uart: add MT7988 serial: sh-sci: Add support for RZ/V2H(P) SoC dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names' dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts serial: 8250_dw: Use reset array API to get resets dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC serial: 8250: Extract platform driver serial: 8250: Extract RSA bits serial: imx: stop casting struct uart_port to struct imx_port ...
2024-07-16Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC dt updates from Arnd Bergmann: "The devicetree updates are fairly well spread out across platforms, with Qualcomm making up about a third of the total. There are three new SoCs in existing product families this: - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores instead of just two as well as a GPU and more high-speed I/O devices. - Qualcomm QCS8550 is a variant of SM8550 for IOT devices - Airoha EN7581 is a 10G-PON network chip and related to the MT7981 Wireless router chip from its parent Mediatek. In total there are 58 new machines, including four riscv boards and eight for 32-bit arm. The most exciting new addition is probably a pair of laptops based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook S15 and the Lenovo Yoga Slim7x. Other noteworthy new additions are: - A total of 20 Qualcomm based machines, mostly Android devices from Samsung, Motorola and LG, as well as a wireless router and some reference designs - Six NXP i.MX based machines, mostly industrial boards along with some reference designs - Mediatek sees some interesting Filogic based routers including the "OpenWRT One", a few new Chromebooks as well as single-board computers. - Four machines from Solidrun based on Marvell cn913x, replacing the older Armada 8000 based counterparts - The four Amlogic machines are all set top boxes or reference designs for them - The nine new Rockchips machines are mostly single-board computers including some interesting ones based on the rk3588 chip like the ROCK 5 ITX board and the CM3588 with its four NVMe slots - The RISC-V boards are all single-board computers based on Starfive JH7110, Microchip MPFS and Allwinner D1, which all had similar boards already There are also a lot of updates to already supported machines, notably for the TI K3, Rockchips, Freescale and of course Qualcomm platforms" * tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits) arm64: dts: allwinner: h616: add crypto engine node riscv: dts: add clock generator for Sophgo SG2042 SoC arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B mailmap: Update Luca Weiss's email address ARM: dts: ixp4xx: nslu2: beeper uses PWM arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices ARM: dts: qcom: msm8960: correct memory base arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator ...
2024-07-09Merge tag 'riscv-sophgo-dt-for-v6.11' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/dt RISC-V Devicetrees for v6.11 Sopgho: Add clock support for SG2042. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.11' of https://github.com/sophgo/linux: riscv: dts: add clock generator for Sophgo SG2042 SoC Link: https://lore.kernel.org/r/PN1P287MB281861EA2B1706B430D2FA3EFEDB2@PN1P287MB2818.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09riscv: dts: add clock generator for Sophgo SG2042 SoCChen Wang
Add clock generator node to device tree for SG2042, and enable clock for uart. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Guo Ren <guoren@kernel.org>
2024-07-08Merge tag 'riscv-dt-for-v6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.11 T-Head: Last change from me before this starts going via Drew's tree is the addition of the SBI PMU events node for the th1520. StarFive: A dts for the Pin64 Star64, another board with a jh7110 SoC. This board is almost identical to the existing Milk-v Mars and VisionFive 2 boards that are already support - just with a different PHY configuration and only one of the two PCIe ports exposed. Additionally, the Mars and VisionFive 2 get their PCie configuration added. Microchip: A dts for the BeagleV Fire. PCIe is disabled on it for now, as some binding and driver changes are required. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: add PCIe dts configuration for JH7110 riscv: dts: microchip: add an initial devicetree for the BeagleV Fire dt-bindings: riscv: microchip: document beaglev-fire riscv: dts: starfive: Update flash partition layout riscv: dts: thead: th1520: Add PMU event node riscv: dts: starfive: add Star64 board devicetree dt-bindings: riscv: starfive: add Star64 board compatible dt-bindings: riscv: Add T-HEAD C908 compatible Link: https://lore.kernel.org/r/20240707-nuttiness-lustfully-4aaf03c991b2@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'sunxi-dt-for-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees * tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees riscv: dts: allwinner: d1s-t113: Add system LDOs arm64: dts: allwinner: h616: add IOMMU node arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks arm64: dts: allwinner: h616: Add GPADC device node dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks ARM: dts: sunxi: remove duplicated entries in makefile arm64: dts: allwinner: Add cache information to the SoC dtsi for H616 arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 arm64: dts: allwinner: Correct the model names for Pine64 boards dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 ARM: dts: sun50i: Add LRADC node dt-bindings: input: sun4i-lradc-keys: Add H616 compatible Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01riscv: dts: starfive: add PCIe dts configuration for JH7110Minda Chen
Add PCIe dts configuraion for JH7110 SoC platform. The Star64 only has one exposed PCIe port, so only the Mars and VisionFive 2 get two enabled. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> [conor: squash in star64's single exposed port] Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-07-01Merge 6.10-rc6 into tty-nextGreg Kroah-Hartman
This resolves the merge issues in the 8250 code due to some reverts in 6.10-rc6 in the console changes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-30riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetreesSamuel Holland
Clockwork Tech manufactures several SoMs for their RasPi CM3-compatible "ClockworkPi" mainboard. Their R-01 SoM features the Allwinner D1 SoC. The R-01 contains only the CPU, DRAM, and always-on voltage regulation; it does not merit a separate devicetree. The ClockworkPi mainboard features analog audio, a MIPI-DSI panel, USB host and peripheral ports, an Ampak AP6256 WiFi/Bluetooth module, and an X-Powers AXP228 PMIC for managing a Li-ion battery. The DevTerm is a complete system which extends the ClockworkPi mainboard with a MIPI-DSI panel and a pair of expansion boards. These expansion boards provide a fan, a USB keyboard, speakers, and a thermal printer. Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20240622150731.1105901-4-wens@kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-06-30riscv: dts: allwinner: d1s-t113: Add system LDOsChen-Yu Tsai
Now that the bindings for the system LDOs have been merged, the nodes for the system LDOs can be added. These are used on the ClockworkPi. This was originally part of Samuel's D1 device tree series [1], but was dropped in v5 as the regulator bindings weren't merged at the time. [1] https://lore.kernel.org/linux-sunxi/20221231233851.24923-1-samuel@sholland.org/ Link: https://lore.kernel.org/r/20240622150731.1105901-3-wens@kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-06-27Merge tag 'riscv-dt-fixes-for-v6.10-rc5+' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.10-rc5+ T-Head: Jisheng hasn't got enough time to look after the platform, so Drew Fustini is going to take over. StarFive: A fix for a regulator voltage range that prevented using low performance SD cards. Canaan: Cleanup for some "over eager" aliases for serial ports that did not exist on some boards and I/O devices disabled on boards where they were not actually in use. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-24riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uartsHal Feng
Add the core reset for uarts, which is necessary for uarts to work. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20240604084729.57239-4-hal.feng@starfivetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-19riscv: dts: microchip: add an initial devicetree for the BeagleV FireConor Dooley
Add an initial devicetree for the BeagleV Fire. This devicetree differs from that in the BeagleBoard BSP as it has a different memory configuration, however it will boot on the same FPGA images. PCI is disabled for now, as the Linux PCI driver (and the binding) assume which root port instance is in use. This will need to be fixed before PCI can be enabled. Link: https://www.beagleboard.org/boards/beaglev-fire Co-developed-by: Jamie Gibbons <jamie.gibbons@microchip.com> Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-19riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boardsShengyu Qu
Currently, for JH7110 boards with EMMC slot, vqmmc voltage for EMMC is fixed to 1.8V, while the spec needs it to be 3.3V on low speed mode and should support switching to 1.8V when using higher speed mode. Since there are no other peripherals using the same voltage source of EMMC's vqmmc(ALDO4) on every board currently supported by mainline kernel, regulator-max-microvolt of ALDO4 should be set to 3.3V. Cc: stable@vger.kernel.org Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Fixes: 7dafcfa79cc9 ("riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-19riscv: dts: starfive: Update flash partition layoutMatthias Brugger
Up to now, the describe flash partition layout has some gaps. Use the whole flash chip by getting rid of the gaps. Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-19riscv: dts: thead: th1520: Add PMU event nodeInochi Amaoto
T-HEAD th1520 uses standard C910 chip and its pmu is already supported by OpenSBI. Add the pmu event description for T-HEAD th1520 SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://www.xrvm.com/product/xuantie/4240217381324001280?spm=xrvm.27140568.0.0.7f979b29nzIa1m Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-19riscv: dts: starfive: add Star64 board devicetreeHenry Bell
The Pine64 Star64 is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 1x USB 3.0 host port - 3x USB 2.0 host port - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 2x 1Gbps Ethernet port - 1x HDMI port - 1x 4-lane DSI - 1x 2-lane CSI - 1x PCIe 2.0 x1 lane Signed-off-by: Henry Bell <dmoo_dv@protonmail.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-19riscv: dts: sophgo: disable write-protection for milkv duoHaylen Chu
Milkv Duo does not have a write-protect pin, so disable write protect to prevent SDcards misdetected as read-only. Fixes: 89a7056ed4f7 ("riscv: dts: sophgo: add sdcard support for milkv duo") Signed-off-by: Haylen Chu <heylenay@outlook.com> Link: https://lore.kernel.org/r/SEYPR01MB4221943C7B101DD2318DA0D3D7CE2@SEYPR01MB4221.apcprd01.prod.exchangelabs.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-05-28riscv: dts: canaan: Disable I/O devices unless usedGeert Uytterhoeven
It is considered good practice to disable on-SoC devices providing external I/O in the SoC-specific .dtsi, and enable them explicitly in the board-specific DTS files when actually wired-up and used. Hence: - Set the status of I/O devices in k210.dtsi to "disabled", - Override the status of used I/O devices in board-specific DTS files to "okay", - Drop unneeded status overrides in board DTS-specific files for the always-enabled pin controller. On e.g. MAiXBiT, this gets rid of an error message when probing the unused slave-only spi2 controller: dw_spi_mmio 50240000.spi: error -22: problem registering spi host dw_spi_mmio 50240000.spi: probe with driver dw_spi_mmio failed with error -22 which is seen since commit 98d75b9ef282f6b9 ("spi: dw: Drop default number of CS setting"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28riscv: dts: canaan: Clean up serial aliasesGeert Uytterhoeven
The SoC-specific k210.dtsi declares aliases for all four serial ports. However, none of the board-specific DTS files configure pin control for any but the first serial port, so the last three ports are not usable. Move the aliases node from the SoC-specific k210.dtsi to the board-specific DTS files, as these are really board-specific, and retain the sole port that is usable. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-20Merge tag 'soc-dt-late-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more SoC devicetree updates from Arnd Bergmann: "This is a follow-up to an earlier pull request for device tree changes, as three platform maintainers sent their contents too late to be included in the main set, but had not caused any further problems since then: - The Amlogic platform now containts support for two new SoC types, the A4 and A5 chips for audio applications. Both come with a reference board, and one more dts file gets addded for the combination of the MNT Reform Laptop with the BPI-CM4 CPU module - The ASpeed platform adds support for six addititional server platforms that use ast2500 or ast2600 as their BMC, while another one gets removed - The RISC-V platforms from Microchip, Starfive and and T-HEAD get additional features for existing hardware, plus the addition of the Milk-V Mars based on the StarFive VisionFive v2 board" * tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits) riscv: dts: microchip: add pac1934 power-monitor to icicle riscv: dts: thead: Fix node ordering in TH1520 device tree ARM: dts: aspeed: Add ASRock E3C256D4I BMC dt-bindings: arm: aspeed: document ASRock E3C256D4I dt-bindings: trivial-devices: add isil,isl69269 ARM: dts: aspeed: x4tf: Add dts for asus x4tf project dt-bindings: arm: aspeed: add ASUS X4TF board ARM: dts: aspeed: Remove Facebook Cloudripper dts ARM: dts: aspeed: drop unused ref_voltage ADC property ARM: dts: aspeed: harma: correct Mellanox multi-host property ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property ARM: dts: aspeed: Modify I2C bus configuration ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name ...
2024-05-07riscv: dts: microchip: add pac1934 power-monitor to icicleConor Dooley
The binding for this landed in v6.9, add the description. In the off-chance that there were people carrying local patches for this based on the driver shipped on the Microchip website (or vendor kernel) both the binding and sysfs filenames changed during upstreaming. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-07RISC-V: add Milkv Mars board devicetreeConor Dooley
The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI I fixed up some nits Emil pointed out. This merges fixes into for-next to avoid messing around with some nodes that were removed as fixes this cycle. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-07riscv: dts: thead: Fix node ordering in TH1520 device treeThomas Bonnefille
According to the device tree coding style, nodes shall be ordered by unit address in ascending order. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-02Merge tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/dt RISC-V Devicetrees for v6.10 Sophgo: Added sdhci support for cv18xx/duo. Added clock support for cv18xx. Added clock for uart/sdhci. Added spi support for cv18xx. Added i2c support for cv18xx. Added reserved memory node for cv1800b/duo. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux: riscv: dts: sophgo: add reserved memory node for CV1800B riscv: dts: sophgo: use real clock for sdhci riscv: dts: sophgo: cv18xx: Add i2c devices riscv: dts: sophgo: cv18xx: Add spi devices riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC riscv: dts: sophgo: add sdcard support for milkv duo Link: https://lore.kernel.org/r/MA0P287MB2822CA2DE757787D6EA3B1F8FE192@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-30riscv: dts: starfive: add Milkv Mars board device treeJisheng Zhang
The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI Add the devicetree file describing the currently supported features, namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: introduce a common board dtsi for jh7110 based boardsJisheng Zhang
This is to prepare for Milkv Mars board dts support in the following patch. Let's factored out common part into .dtsi. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcardJisheng Zhang
No physical write-protect line is present, so setting "disable-wp". Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: visionfive 2: add tf cd-gpiosJisheng Zhang
Per VisionFive 2 1.2B, and 1.3A boards' SCH, GPIO 41 is used as card detect. So add "cd-gpios" property for this. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: visionfive 2: use cpus label for timebase freqJisheng Zhang
As pointed out by Krzysztof "Board should not bring new CPU nodes. Override by label instead." Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: visionfive 2: update sound and codec dt node nameJisheng Zhang
Use "audio-codec" as the codec dt node name, and "sound" as the simple audio card dt name. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-30riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsiJisheng Zhang
Add the 'cpus' label so that we can reference it in board dts files. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-23riscv: dts: sophgo: add reserved memory node for CV1800BInochi Amaoto
The original dts of CV1800B has a weird memory length as it contains reserved memory for coprocessor. Make this area a separate node so it can get the real memory length. Link: https://lore.kernel.org/r/IA1PR20MB49531F274753B04A5547DB59BB052@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-04-22riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties ↵Lad Prabhakar
from ETH0/1 nodes Now that we have enabled IRQC support for RZ/Five SoC switch to interrupt mode for ethernet0/1 PHYs instead of polling mode. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240403203503.634465-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-22riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSILad Prabhakar
Add the IRQC node to RZ/Five (R9A07G043F) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240403203503.634465-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-22riscv: dts: sophgo: use real clock for sdhciInochi Amaoto
As the clk patch is merged, Use real clocks for sdhci0. Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/r/IA1PR20MB4953CA5D46EA8913B130D502BB052@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-04-15riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardwareHannah Peuckmann
This partially reverts commit 92cfc35838b2 ("riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1") This added device tree nodes for I2S hardware that is not actually on the VisionFive 2 board, but connected on the 40pin header. Many different extension boards could be added on those pins, so this should be handled by overlays instead. This also conflicts with the TDM node which also attempts to grab GPIO 44: starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s Fixes: 92cfc35838b2 ("riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1") Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-15riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardwareHannah Peuckmann
This partially reverts commit e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm") This added device tree nodes for TDM hardware that is not actually on the VisionFive 2 board, but connected on the 40pin header. Many different extension boards could be added on those pins, so this should be handled by overlays instead. This also conflicts with the I2S node which also attempts to grab GPIO 44: starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s Fixes: e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm") Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-11riscv: dts: sophgo: cv18xx: Add i2c devicesInochi Amaoto
Add i2c devices for the CV180x, CV181x and SG200x soc. Link: https://lore.kernel.org/r/IA1PR20MB49531AA2DBD4832B7926D4A8BB442@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-04-11riscv: dts: sophgo: cv18xx: Add spi devicesInochi Amaoto
Add spi devices for the CV180x, CV181x and SG200x soc. Link: https://lore.kernel.org/r/IA1PR20MB49532705DE532BCF81CCEFD0BB442@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-04-11riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoCInochi Amaoto
Add missing clocks of uart node for CV1800B and CV1812H. Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/r/IA1PR20MB4953198222C3ABC2A2B6DE21BB262@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
generated by cgit (git 2.34.1) at 2025-07-16 00:39:35 +0000