| Age | Commit message (Collapse) | Author |
|---|
|
Add a "template" crc-clmul-template.h that can generate RISC-V Zbc
optimized CRC functions. Each generated CRC function is parameterized
by CRC length and bit order, and it accepts a pointer to the constants
struct required for the specific CRC polynomial desired. Update
gen-crc-consts.py to support generating the needed constants structs.
This makes it possible to easily wire up a Zbc optimized implementation
of almost any CRC.
The design generally follows what I did for x86, but it is simplified by
using RISC-V's scalar carryless multiplication Zbc, which has no
equivalent on x86. RISC-V's clmulr instruction is also helpful. A
potential switch to Zvbc (or support for Zvbc alongside Zbc) is left for
future work. For long messages Zvbc should be fastest, but it would
need to be shown to be worthwhile over just using Zbc which is
significantly more convenient to use, especially in the kernel context.
Compared to the existing Zbc-optimized CRC32 code and the earlier
proposed Zbc-optimized CRC-T10DIF code
(https://lore.kernel.org/r/20250211071101.181652-1-zhihang.shao.iscas@gmail.com),
this submission deduplicates the code among CRC variants and is
significantly more optimized. It uses "folding" to take better
advantage of instruction-level parallelism (to a more limited extent
than x86 for now, but it could be extended to more), it reworks the
Barrett reduction to eliminate unnecessary instructions, and it
documents all the math used and makes all the constants reproducible.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250216225530.306980-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fix for v6.14-rc6
A single fix for an incorrect define in the jh7110 pinctrl header.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Fix a typo in StarFive JH7110 pin function definitions
Link: https://lore.kernel.org/r/20250305-sip-unable-d56ef7dbf86b@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The perf event should be marked disabled during the creation as
it is not ready to be scheduled until there is SBI PMU start call
or config matching is called with auto start. Otherwise, event add/start
gets called during perf_event_create_kernel_counter function.
It will be enabled and scheduled to run via perf_event_enable during
either the above mentioned scenario.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-1-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aecdf ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
|
|
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove kvm_arch_sync_events() now that x86 no longer uses it (no other
arch has ever used it).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250224235542.2562848-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add msi-controller node to dts for SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f47c6c3f0309a543d495cb088d6c8c5750bb5647.1740535748.git.unicorn_wang@outlook.com
|
|
Pinctrl is an essential driver for SpacemiT's SoC,
The uart driver requires it, same as sd card driver,
so let's enable it by default for this SoC.
The CONFIG_PINCTRL_SPACEMIT_K1 isn't enabled when using
'make defconfig' to select kernel configuration options.
This result in a broken uart driver where fail at probe()
stage due to no pins found.
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Reported-by: Alex Elder <elder@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/20250218-k1-pinctrl-option-v3-1-36e031e0da1b@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
x86 version of arch_memremap_wb() needs the flags to decide if the mapping
has to be encrypted or decrypted.
Pass down the flag to arch_memremap_wb(). All current implementations
ignore the argument.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250217163822.343400-2-kirill.shutemov@linux.intel.com
|
|
Remove the unnecessary kick to the vCPU after writing to the vs_file
of IMSIC in kvm_riscv_vcpu_aia_imsic_inject.
For vCPUs that are running, writing to the vs_file directly forwards
the interrupt as an MSI to them and does not need an extra kick.
For vCPUs that are descheduled after emulating WFI, KVM will enable
the guest external interrupt for that vCPU in
kvm_riscv_aia_wakeon_hgei. This means that writing to the vs_file
will cause a guest external interrupt, which will cause KVM to wake
up the vCPU in hgei_interrupt to handle the interrupt properly.
Signed-off-by: BillXiang <xiangwencheng@lanxincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250221104538.2147-1-xiangwencheng@lanxincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-9-13a4669dfc8c@linutronix.de
|
|
As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
|
|
Enable CONFIG_GENERIC_PENDING_IRQ for RISC-V so that RISC-V interrupt chips
can support delayed interrupt mirgration in interrupt context.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-7-apatel@ventanamicro.com
|
|
One of four USB-A ports on the Pine64 Star64 is USB 3.0 which requires to
disable PCIE0 and change the mode of PCIE0 PHY to USB3.0 operation. The
remaining three USB-A ports are USB 2.0 with the USB0 PHY and do not
conflict with any of PCIE0 or PCIE1. PCIE1 (1-lane) routes to a PCIe X4
connector.
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
StarFive JH7110 contains a Cadence USB2.0+USB3.0 controller IP block that
may exclusively use pciephy0 for USB3.0 connectivity. Add the register
offsets for the driver to enable/disable USB3.0 on pciephy0.
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Starfive Soc common defines GPIO28 as pcie1 reset, GPIO21 as pcie1 wakeup;
But the FML13V01 board uses GPIO21 as pcie1 reset, GPIO28 as pcie1 wakeup;
redefine pcie1 gpio and enable pcie1 for pcie based Wi-Fi.
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The jh7110 boards do not have a Rohm DAC on them as far as I
can tell, and they certainly do not have a dh2228fv, as this device does
not actually exist! Remove the dac nodes from the devicetrees as it is
not acceptable to pretend to have a device on a board in order to bind
the spidev driver in Linux.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d5ededf778f59f2fc38ff4276fb7f4c893e4142c.1738746821.git.namcao@linutronix.de
|
|
The normal operating temperature range of SG2042 is -20 degrees
Celsius ~ 85 degrees Celsius.
Simultaneously monitor soc temperature and board temperature to
improve redundancy and safety.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/5a36a2784d97ed7b1e06777cb0c3c14fe9185e99.1739351437.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
|
|
Milk-V Pioneer uses fan as cooling-device, and speed of the fan is
controlled by the first channel of pwm controller of SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/dd23362328f77dd91aa9354848bbb0abad0f554b.1739351437.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
|
|
Add initial support for the Milk-V Jupiter board [1], which is a Mini ITX
computer based on the SpacemiT K1/M1 Octa-Core X60 64-bit RISC-V SoC [2].
There are two variant for this board, one using the K1 chip and another
using the M1 chip. The main difference is that the M1 can run at a higher
frequency than the K1, thanks to its packaging.
For now, only a DTS for the K1 variant is added since there isn't support
yet for the X60 cores operating performance and thermal trip points.
The support is minimal, but at least allows to boot into a serial console.
Link: https://milkv.io/jupiter [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250214151700.666544-3-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The spec says sleep_type is 32 bits wide and "In case the data is
defined as 32bit wide, higher privilege software must ensure that it
only uses 32 bit data." Mask off upper bits of sleep_type before
using it.
Fixes: 023c15151fbb ("RISC-V: KVM: Add SBI system suspend support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250217084506.18763-12-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When an invalid function ID of an SBI extension is used we should
return not-supported, not invalid-param.
Fixes: 5f862df5585c ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250217084506.18763-11-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When an invalid function ID of an SBI extension is used we should
return not-supported, not invalid-param. Also, when we see that at
least one hartid constructed from the base and mask parameters is
invalid, then we should return invalid-param. Finally, rather than
relying on overflowing a left shift to result in zero and then using
that zero in a condition which [correctly] skips sending an IPI (but
loops unnecessarily), explicitly check for overflow and exit the loop
immediately.
Fixes: 5f862df5585c ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250217084506.18763-10-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The spec says suspend_type is 32 bits wide and "In case the data is
defined as 32bit wide, higher privilege software must ensure that it
only uses 32 bit data." Mask off upper bits of suspend_type before
using it.
Fixes: 763c8bed8c05 ("RISC-V: KVM: Implement SBI HSM suspend call")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250217084506.18763-9-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
"Not stopped" means started or suspended so we need to check for
a single state in order to have a chance to check for each state.
Also, we need to use target_vcpu when checking for the suspend
state.
Fixes: 763c8bed8c05 ("RISC-V: KVM: Implement SBI HSM suspend call")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250217084506.18763-8-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b0771 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
Fixes: b90edb33010b ("RISC-V: Add futex support.")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmfrkv2vhz.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sign extend also an unsigned compare value to match what lr.w is doing.
Otherwise try_cmpxchg may spuriously return true when used on a u32 value
that has the sign bit set, as it happens often in inode_set_ctime_current.
Do this in three conversion steps. The first conversion to long is needed
to avoid a -Wpointer-to-int-cast warning when arch_cmpxchg is used with a
pointer type. Then convert to int and back to long to always sign extend
the 32-bit value to 64-bit.
Fixes: 6c58f25e6938 ("riscv/atomic: Fix sign extension for RV64I")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmed0k4prh.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Comparison of bitmaps should be done using bitmap_equal(), not memcmp(),
use the former one to compare isa bitmaps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Fixes: 625034abd52a8c ("riscv: add ISA extensions validation callback")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250210155615.1545738-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Link: https://lore.kernel.org/r/20241104190314.270095-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, there are 3 regulators defined in JH7110's common device tree,
but regulator names are mixed with "-" and "_". So unify them to "_",
which is more often to be seen in other dts files.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Following the standardization on crc32c() as the lib entry point for the
Castagnoli CRC32 instead of the previous mix of crc32c(), crc32c_le(),
and __crc32c_le(), make the same change to the underlying base and arch
functions that implement it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Drop the use of __pure and __attribute_const__ from the CRC32 library
functions that had them. Both of these are unusual optimizations that
don't help properly written code. They seem more likely to cause
problems than have any real benefit.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
SG2042 has one PWM controller, which has 4 pwm output channels.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/f376e16c0ee0cdac51bb91421d78defc0601627a.1738737617.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
|
|
Fix a typo in StarFive JH7110 pin function definitions for GPOUT_SYS_SDIO1_DATA4
Fixes: e22f09e598d12 ("riscv: dts: starfive: Add StarFive JH7110 pin function definitions")
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Hal Feng <hal.feng@starfivetech.com>
CC: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The existing PolarFire SoC devicetrees all use root port instance 1,
update the reg properties in PCIe nodes to use the new format that
specifies the instance in use. Failing to do so would still work but
produces warnings:
mpfs-icicle-kit.dtb: pcie@3000000000: reg: [[48, 0, 0, 134217728], [0, 1124073472, 0, 65536]] is too short
mpfs-icicle-kit.dtb: pcie@3000000000: reg-names: ['cfg', 'apb'] is too short
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Conor Dooley <conor@kernel.org>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: valentina.fernandezalanis@microchip.com
CC: Rob Herring <robh@kernel.org>
CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
CC: linux-riscv@lists.infradead.org
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
|
|
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1
[59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8
[60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1
[61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8
[62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1
[63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The part of physical memory that exceeds the size of the linear mapping
will be discarded. When the system starts up normally, a warning message
will be printed to prevent confusion caused by the mismatch between the
system memory and the actual physical memory.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814062625.19794-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
|
|
Before SLUB initialization, various subsystems used memblock_alloc to
allocate memory. In most cases, when memory allocation fails, an
immediate panic is required. To simplify this behavior and reduce
repetitive checks, introduce `memblock_alloc_or_panic`. This function
ensures that memory allocation failures result in a panic automatically,
improving code readability and consistency across subsystems that require
this behavior.
[guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic]
Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com
Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/
Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
