| Age | Commit message (Collapse) | Author |
|---|
|
The code assumes that the stub code can fit into a single page. This is
unlikely to ever change, but add a link time assert instead so that
there will be no hard to debug error.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-6-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The winch "thread" is really a separate process. Using prctl to set
PR_SET_PDEATHSIG ensures that this separate thread will be killed if the
UML kernel itself dies unexpectedly and does not perform proper cleanup.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-5-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Enable PR_SET_PDEATHSIG so that the UML userspace process will be killed
when the kernel exits unexpectedly.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Using clone will not undo features that have been enabled by libc. An
example of this already happening is rseq, which could cause the kernel
to read/write memory of the userspace process. In the future the
standard library might also use mseal by default to protect itself,
which would also thwart our attempts at unmapping everything.
Solve all this by taking a step back and doing an execve into a tiny
static binary that sets up the minimal environment required for the
stub without using any standard library. That way we have a clean
execution environment that is fully under the control of UML.
Note that this changes things a bit as the FDs are not anymore shared
with the kernel. Instead, we explicitly share the FDs for the physical
memory and all existing iomem regions. Doing this is fine, as iomem
regions cannot be added at runtime.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-3-benjamin@sipsolutions.net
[use pipe() instead of pipe2(), remove unneeded close() calls]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We do not need the extra save/restore of the FP registers when getting
the fault information. This was originally added in commit 2f56debd77a8
("uml: fix FP register corruption") but at that time the code was not
saving/restoring the FP registers when switching to userspace. This was
fixed in commit fbfe9c847edf ("um: Save FPU registers between task
switches") and since then the auxiliary registers have not been useful.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241004233821.2130874-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS is not defined anywhere.
In the submitted patch set [1], the first patch "um/kconfig: introduce
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS" was not applied.
Only 2/3 and 3/3 were applied, which are now:
- 730586ff7fad ("um: Allow static linking for non-glibc implementations")
- 5e1121cd43d4 ("um: Some fixes to build UML with musl")
Given that nobody has noticed the missing first patch for many years,
it seems it was unnecessary.
[1]: https://lore.kernel.org/lkml/20200719210222.2811-1-ignat@cloudflare.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20240924113342.32530-1-masahiroy@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The highmem support has been removed by commit a98a6d864d3b ("um:
Remove broken highmem support"). The 2-level page table is sufficient
on UML/i386 now. Remove the 3-level page table support on UML/i386
which is still marked as experimental.
Suggested-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240918061702.614837-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When switching from userspace to the kernel, all registers including the
FP registers are copied into the kernel and restored later on. As such,
the true source for the FP register state is actually already in the
kernel and they should never be grabbed from the userspace process.
Change the various places to simply copy the data from the internal FP
register storage area. Note that on i386 the format of PTRACE_GETFPREGS
and PTRACE_GETFPXREGS is different enough that conversion would be
needed. With this patch, -EINVAL is returned if the non-native format is
requested.
The upside is, that this patchset fixes setting registers via ptrace
(which simply did not work before) as well as fixing setting floating
point registers using the mcontext on signal return on i386.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913133845.964292-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This function is expected to return a boolean value, which should be
true on success and false on failure.
Fixes: d1254b12c93e ("uml: fix x86_64 core dump crash")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240913023302.130300-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently physmem_size is defined as long long but declared locally
as unsigned long long before using it in separate .c files. Make them
match by defining physmem_size as unsigned long long and also move
the declaration to a common header to allow the compiler to check it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Highmem was only supported on UML/i386. And the support has been
removed by commit a98a6d864d3b ("um: Remove broken highmem support").
Remove the leftovers and stop UML from trying to setup highmem when
the sum of physmem_size and iomem_size exceeds max_physmem.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This issue happens when the real map size is greater than LONG_MAX,
which can be easily triggered on UML/i386.
Fixes: fe205bdd1321 ("um: Print minimum physical memory requirement")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
high_physmem has already been declared in as-layout.h, so there is
no need to declare it explicitly in the .c file again.
While at it, group the declarations of __real_malloc and __real_free
together to make the code slightly more readable.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-5-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere in the codebase.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Removal of dead code (TT mode leftovers, etc)
- Fixes for the network vector driver
- Fixes for time-travel mode
* tag 'uml-for-linus-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: fix time-travel syscall scheduling hack
um: Remove outdated asm/sysrq.h header
um: Remove the declaration of user_thread function
um: Remove the call to SUBARCH_EXECVE1 macro
um: Remove unused mm_fd field from mm_id
um: Remove unused fields from thread_struct
um: Remove the redundant newpage check in update_pte_range
um: Remove unused kpte_clear_flush macro
um: Remove obsoleted declaration for execute_syscall_skas
user_mode_linux_howto_v2: add VDE vector support in doc
vector_user: add VDE support
um: remove ARCH_NO_PREEMPT_DYNAMIC
um: vector: Fix NAPI budget handling
um: vector: Replace locks guarding queue depth with atomics
um: remove variable stack array in os_rcv_fd_msg()
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The schedule() call there really never did anything at
least since the introduction of the EEVDF scheduler,
but now I found a case where we permanently hang in a
loop of -ERESTARTNOINTR (due to locking.) Work around
it by making any syscalls with error return take time
(and then schedule after) so we cannot hang in such a
loop forever.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This header no longer serves a purpose after show_trace was removed
by commit 9d1ee8ce92e1 ("um: Rewrite show_stack()").
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This function has never been defined since its declaration was
introduced by commit 1da177e4c3f4 ("Linux-2.6.12-rc2").
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This macro has never been defined by any supported sub-architectures
in tree since it was introduced by commit 1d3468a6643a ("[PATCH uml:
move _kern.c files").
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
It's no longer used since the removal of the SKAS3/4 support.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
These fields are no longer used since the removal of tt mode.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The two checks have been identical since commit ef714f15027c ("um:
remove force_flush_all from fork_handler"). And the inner one isn't
necessary anymore.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This macro has no users, and __flush_tlb_one doesn't exist either.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The execute_syscall_skas() have been removed since
commit e32dacb9f481 ("[PATCH] uml: system call path cleanup"),
and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This is the actual implementation of VDE support as a vector transport.
Signed-off-by: Renzo Davoli <renzo@cs.unibo.it>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
There's no such symbol and we currently don't have any of the
mechanisms to make boot-time selection cheap enough, so we can't
have HAVE_PREEMPT_DYNAMIC_CALL or HAVE_PREEMPT_DYNAMIC_KEY.
Remove the select statement.
Reported-by: Lukas Bulwahn <lbulwahn@redhat.com>
Fixes: cd01672d64a3 ("um: Enable preemption in UML")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Fix the handling of NAPI budget.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
UML vector drivers use ring buffer structures which map
preallocated skbs onto mmsg vectors for use with sendmmsg
and recvmmsg. They are designed around a single consumer,
single producer pattern allowing simultaneous enqueue and
dequeue.
Lock debugging with preemption showed possible races when
locking the queue depth. This patch addresses this by
removing extra locks, adding barriers and making queue
depth inc/dec and access atomic.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When generalizing this, I was in the mindset of this being
"userspace" code, but even there we should not use variable
arrays as the kernel is moving away from allowing that.
Simply reserve (but not use) enough space for the maximum
two descriptors we might need now, and return an error if
attempting to receive more than that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407041459.3SYg4TEi-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
|
|
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
|
|
kmsg_dump doesn't forward the panic reason string to the kmsg_dumper
callback.
This patch adds a new struct kmsg_dump_detail, that will hold the
reason and description, and pass it to the dump() callback.
To avoid updating all kmsg_dump() call, it adds a kmsg_dump_desc()
function and a macro for backward compatibility.
I've written this for drm_panic, but it can be useful for other
kmsg_dumper.
It allows to see the panic reason, like "sysrq triggered crash"
or "VFS: Unable to mount root fs on xxxx" on the drm panic screen.
v2:
* Use a struct kmsg_dump_detail to hold the reason and description
pointer, for more flexibility if we want to add other parameters.
(Kees Cook)
* Fix powerpc/nvram_64 build, as I didn't update the forward
declaration of oops_to_nvram()
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Kees Cook <kees@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702122639.248110-1-jfalempe@redhat.com
|
|
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since the original find_vqs() is no longer present, rename
find_vqs_info() back to find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-10-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert existing find_vqs() transport implementations
to use find_vqs_info() config op.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-7-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
UML should not be using the architecture native runtime constants, since
that requires also having the appropriate instruction fixups (and all
the linker script details).
Not that using that code would be impossible, but it's not worth it.
Just point UML at the generic version.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e3c92e81711d ("runtime constants: add x86 architecture support")
Link: https://lore.kernel.org/all/20240716143644.GA1827132@thelio-3990X/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
|
|
If we start validating the existence of the asm-generic side of
generated headers, this one causes a warning:
make[3]: *** No rule to make target 'arch/um/include/generated/asm/bpf_perf_event.h', needed by 'all'. Stop.
The problem is that the asm-generic header only exists for the uapi
variant, but arch/um has no uapi headers and instead uses the x86
userspace API.
Add a custom file with an explicit redirect to avoid this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If open fails, we have already set vp->opened, but it's
not reset so that any further attempts will just return
-ENXIO. Reset vp->opened even if close has nothing to do.
This helps e.g. with slirp4netns handling only a single
connection, you can then restart it and open the device
again.
Link: https://patch.msgid.link/20240703184622.df40c5c38461.Id4e20b48938c6019d99e6133227a34ac059db466@changeid
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This lock is useless, all the places that are using
it for some locking will already hold the RTNL. Just
remove it.
Link: https://patch.msgid.link/20240703184606.19aa35b14959.I9cf5f2c4e35abd06cc89bf2e990fa755eb8e5f0f@changeid
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Otherwise we always get
reboot: Power off not available: System halted instead
which is really quite pointless.
Link: https://patch.msgid.link/20240703173839.fcbb538c6686.I3d333f4773cff93c4337c4d128ee0b1b501b3dfa@changeid
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
