| Age | Commit message (Collapse) | Author |
|---|
|
Add a parameter "kvm" to kvm_mmu_page_ad_need_write_protect() and its
caller tdp_mmu_need_write_protect().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a parameter "kvm" to kvm_cpu_dirty_log_size() and down to its callers:
kvm_dirty_ring_get_rsvd_entries(), kvm_dirty_ring_alloc().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle vCPUs dissociations by invoking SEAMCALL TDH.VP.FLUSH which flushes
the address translation caches and cached TD VMCS of a TD vCPU in its
associated pCPU.
In TDX, a vCPUs can only be associated with one pCPU at a time, which is
done by invoking SEAMCALL TDH.VP.ENTER. For a successful association, the
vCPU must be dissociated from its previous associated pCPU.
To facilitate vCPU dissociation, introduce a per-pCPU list
associated_tdvcpus. Add a vCPU into this list when it's loaded into a new
pCPU (i.e. when a vCPU is loaded for the first time or migrated to a new
pCPU).
vCPU dissociations can happen under below conditions:
- On the op hardware_disable is called.
This op is called when virtualization is disabled on a given pCPU, e.g.
when hot-unplug a pCPU or machine shutdown/suspend.
In this case, dissociate all vCPUs from the pCPU by iterating its
per-pCPU list associated_tdvcpus.
- On vCPU migration to a new pCPU.
Before adding a vCPU into associated_tdvcpus list of the new pCPU,
dissociation from its old pCPU is required, which is performed by issuing
an IPI and executing SEAMCALL TDH.VP.FLUSH on the old pCPU.
On a successful dissociation, the vCPU will be removed from the
associated_tdvcpus list of its previously associated pCPU.
- On tdx_mmu_release_hkid() is called.
TDX mandates that all vCPUs must be disassociated prior to the release of
an hkid. Therefore, dissociation of all vCPUs is a must before executing
the SEAMCALL TDH.MNG.VPFLUSHDONE and subsequently freeing the hkid.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073858.22312-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new VM-scoped KVM_MEMORY_ENCRYPT_OP IOCTL subcommand,
KVM_TDX_FINALIZE_VM, to perform TD Measurement Finalization.
Documentation for the API is added in another patch:
"Documentation/virt/kvm: Document on Trust Domain Extensions(TDX)"
For the purpose of attestation, a measurement must be made of the TDX VM
initial state. This is referred to as TD Measurement Finalization, and
uses SEAMCALL TDH.MR.FINALIZE, after which:
1. The VMM adding TD private pages with arbitrary content is no longer
allowed
2. The TDX VM is runnable
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240904030751.117579-21-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new ioctl for the user space VMM to initialize guest memory with the
specified memory contents.
Because TDX protects the guest's memory, the creation of the initial guest
memory requires a dedicated TDX module API, TDH.MEM.PAGE.ADD(), instead of
directly copying the memory contents into the guest's memory in the case of
the default VM type.
Define a new subcommand, KVM_TDX_INIT_MEM_REGION, of vCPU-scoped
KVM_MEMORY_ENCRYPT_OP. Check if the GFN is already pre-allocated, assign
the guest page in Secure-EPT, copy the initial memory contents into the
guest memory, and encrypt the guest memory. Optionally, extend the memory
measurement of the TDX guest.
The ioctl uses the vCPU file descriptor because of the TDX module's
requirement that the memory is added to the S-EPT (via TDH.MEM.SEPT.ADD)
prior to initialization (TDH.MEM.PAGE.ADD). Accessing the MMU in turn
requires a vCPU file descriptor, just like for KVM_PRE_FAULT_MEMORY. In
fact, the post-populate callback is able to reuse the same logic used by
KVM_PRE_FAULT_MEMORY, so that userspace can do everything with a single
ioctl.
Note that this is the only way to invoke TDH.MEM.SEPT.ADD before the TD
in finalized, as userspace cannot use KVM_PRE_FAULT_MEMORY at that
point. This ensures that there cannot be pages in the S-EPT awaiting
TDH.MEM.PAGE.ADD, which would be treated incorrectly as spurious by
tdp_mmu_map_handle_target_level() (KVM would see the SPTE as PRESENT,
but the corresponding S-EPT entry will be !PRESENT).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
- KVM_BUG_ON() for kvm_tdx->nr_premapped (Paolo)
- Use tdx_operand_busy()
- Merge first patch in SEPT SEAMCALL retry series in to this base
(Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In future changes coco specific code will need to call kvm_tdp_map_page()
from within their respective gmem_post_populate() callbacks. Export it
so this can be done from vendor specific code. Since kvm_mmu_reload()
will be needed for this operation, export its callee kvm_mmu_load() as
well.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073827.22270-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Bail out of the loop in kvm_tdp_map_page() when a VM is dead. Otherwise,
kvm_tdp_map_page() may get stuck in the kernel loop when there's only one
vCPU in the VM (or if the other vCPUs are not executing ioctls), even if
fatal errors have occurred.
kvm_tdp_map_page() is called by the ioctl KVM_PRE_FAULT_MEMORY or the TDX
ioctl KVM_TDX_INIT_MEM_REGION. It loops in the kernel whenever RET_PF_RETRY
is returned. In the TDP MMU, kvm_tdp_mmu_map() always returns RET_PF_RETRY,
regardless of the specific error code from tdp_mmu_set_spte_atomic(),
tdp_mmu_link_sp(), or tdp_mmu_split_huge_page(). While this is acceptable
in general cases where the only possible error code from these functions is
-EBUSY, TDX introduces an additional error code, -EIO, due to SEAMCALL
errors.
Since this -EIO error is also a fatal error, check for VM dead in the
kvm_tdp_map_page() to avoid unnecessary retries until a signal is pending.
The error -EIO is uncommon and has not been observed in real workloads.
Currently, it is only hypothetically triggered by bypassing the real
SEAMCALL and faking an error in the SEAMCALL wrapper.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250220102728.24546-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement hook private_max_mapping_level for TDX to let TDP MMU core get
max mapping level of private pages.
The value is hard coded to 4K for no huge page support for now.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073816.22256-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement hooks in TDX to propagate changes of mirror page table to private
EPT, including changes for page table page adding/removing, guest page
adding/removing.
TDX invokes corresponding SEAMCALLs in the hooks.
- Hook link_external_spt
propagates adding page table page into private EPT.
- Hook set_external_spte
tdx_sept_set_private_spte() in this patch only handles adding of guest
private page when TD is finalized.
Later patches will handle the case of adding guest private pages before
TD finalization.
- Hook free_external_spt
It is invoked when page table page is removed in mirror page table, which
currently must occur at TD tear down phase, after hkid is freed.
- Hook remove_external_spte
It is invoked when guest private page is removed in mirror page table,
which can occur when TD is active, e.g. during shared <-> private
conversion and slot move/deletion.
This hook is ensured to be triggered before hkid is freed, because
gmem fd is released along with all private leaf mappings zapped before
freeing hkid at VM destroy.
TDX invokes below SEAMCALLs sequentially:
1) TDH.MEM.RANGE.BLOCK (remove RWX bits from a private EPT entry),
2) TDH.MEM.TRACK (increases TD epoch)
3) TDH.MEM.PAGE.REMOVE (remove the private EPT entry and untrack the
guest page).
TDH.MEM.PAGE.REMOVE can't succeed without TDH.MEM.RANGE.BLOCK and
TDH.MEM.TRACK being called successfully.
SEAMCALL TDH.MEM.TRACK is called in function tdx_track() to enforce that
TLB tracking will be performed by TDX module for private EPT.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
- Remove TDX_ERROR_SEPT_BUSY and Add tdx_operand_busy() helper (Binbin)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle TLB tracking for TDX by introducing function tdx_track() for private
memory TLB tracking and implementing flush_tlb* hooks to flush TLBs for
shared memory.
Introduce function tdx_track() to do TLB tracking on private memory, which
basically does two things: calling TDH.MEM.TRACK to increase TD epoch and
kicking off all vCPUs. The private EPT will then be flushed when each vCPU
re-enters the TD. This function is unused temporarily in this patch and
will be called on a page-by-page basis on removal of private guest page in
a later patch.
In earlier revisions, tdx_track() relied on an atomic counter to coordinate
the synchronization between the actions of kicking off vCPUs, incrementing
the TD epoch, and the vCPUs waiting for the incremented TD epoch after
being kicked off.
However, the core MMU only actually needs to call tdx_track() while
aleady under a write mmu_lock. So this sychnonization can be made to be
unneeded. vCPUs are kicked off only after the successful execution of
TDH.MEM.TRACK, eliminating the need for vCPUs to wait for TDH.MEM.TRACK
completion after being kicked off. tdx_track() is therefore able to send
requests KVM_REQ_OUTSIDE_GUEST_MODE rather than KVM_REQ_TLB_FLUSH.
Hooks for flush_remote_tlb and flush_remote_tlbs_range are not necessary
for TDX, as tdx_track() will handle TLB tracking of private memory on
page-by-page basis when private guest pages are removed. There is no need
to invoke tdx_track() again in kvm_flush_remote_tlbs() even after changes
to the mirrored page table.
For hooks flush_tlb_current and flush_tlb_all, which are invoked during
kvm_mmu_load() and vcpu load for normal VMs, let VMM to flush all EPTs in
the two hooks for simplicity, since TDX does not depend on the two
hooks to notify TDX module to flush private EPT in those cases.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073753.22228-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set per-VM shadow_mmio_value to 0 for TDX.
With enable_mmio_caching on, KVM installs MMIO SPTEs for TDs. To correctly
configure MMIO SPTEs, TDX requires the per-VM shadow_mmio_value to be set
to 0. This is necessary to override the default value of the suppress VE
bit in the SPTE, which is 1, and to ensure value 0 in RWX bits.
For MMIO SPTE, the spte value changes as follows:
1. initial value (suppress VE bit is set)
2. Guest issues MMIO and triggers EPT violation
3. KVM updates SPTE value to MMIO value (suppress VE bit is cleared)
4. Guest MMIO resumes. It triggers VE exception in guest TD
5. Guest VE handler issues TDG.VP.VMCALL<MMIO>
6. KVM handles MMIO
7. Guest VE handler resumes its execution after MMIO instruction
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073743.22214-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Future changes will want to set shadow_mmio_value from TDX code. Add a
helper to setter with a name that makes more sense from that context.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[split into new patch]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073730.22200-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disable TDX support when TDP MMU or mmio caching or EPT A/D bits aren't
supported.
As TDP MMU is becoming main stream than the legacy MMU, the legacy MMU
support for TDX isn't implemented.
TDX requires KVM mmio caching. Without mmio caching, KVM will go to MMIO
emulation without installing SPTEs for MMIOs. However, TDX guest is
protected and KVM would meet errors when trying to emulate MMIOs for TDX
guest during instruction decoding. So, TDX guest relies on SPTEs being
installed for MMIOs, which are with no RWX bits and with VE suppress bit
unset, to inject VE to TDX guest. The TDX guest would then issue TDVMCALL
in the VE handler to perform instruction decoding and have host do MMIO
emulation.
TDX also relies on EPT A/D bits as EPT A/D bits have been supported in all
CPUs since Haswell. Relying on it can avoid RWX bits being masked out in
the mirror page table for prefaulted entries.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
Requested by Sean at [1].
[1] https://lore.kernel.org/kvm/Zva4aORxE9ljlMNe@google.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the direct root handle memslot GFNs at an alias with the TDX shared
bit set.
For TDX shared memory, the memslot GFNs need to be mapped at an alias with
the shared bit set. These shared mappings will be mapped on the KVM MMU's
"direct" root. The direct root has it's mappings shifted by applying
"gfn_direct_bits" as a mask. The concept of "GPAW" (guest physical address
width) determines the location of the shared bit. So set gfn_direct_bits
based on this, to map shared memory at the proper GPA.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073613.22100-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX uses two EPT pointers, one for the private half of the GPA space and
one for the shared half. The private half uses the normal EPT_POINTER vmcs
field, which is managed in a special way by the TDX module. For TDX, KVM is
not allowed to operate on it directly. The shared half uses a new
SHARED_EPT_POINTER field and will be managed by the conventional MMU
management operations that operate directly on the EPT root. This means for
TDX the .load_mmu_pgd() operation will need to know to use the
SHARED_EPT_POINTER field instead of the normal one. Add a new wrapper in
x86 ops for load_mmu_pgd() that either directs the write to the existing
vmx implementation or a TDX one.
tdx_load_mmu_pgd() is so much simpler than vmx_load_mmu_pgd() since for the
TDX mode of operation, EPT will always be used and KVM does not need to be
involved in virtualization of CR3 behavior. So tdx_load_mmu_pgd() can
simply write to SHARED_EPT_POINTER.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073601.22084-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX defines SEAMCALL APIs to access TDX control structures corresponding to
the VMX VMCS. Introduce helper accessors to hide its SEAMCALL ABI details.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073551.22070-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Teach EPT violation helper to check shared mask of a GPA to find out
whether the GPA is for private memory.
When EPT violation is triggered after TD accessing a private GPA, KVM will
exit to user space if the corresponding GFN's attribute is not private.
User space will then update GFN's attribute during its memory conversion
process. After that, TD will re-access the private GPA and trigger EPT
violation again. Only with GFN's attribute matches to private, KVM will
fault in private page, map it in mirrored TDP root, and propagate changes
to private EPT to resolve the EPT violation.
Relying on GFN's attribute tracking xarray to determine if a GFN is
private, as for KVM_X86_SW_PROTECTED_VM, may lead to endless EPT
violations.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073539.22056-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The difference of TDX EPT violation is how to retrieve information, GPA,
and exit qualification. To share the code to handle EPT violation, split
out the guts of EPT violation handler so that VMX/TDX exit handler can call
it after retrieving GPA and exit qualification.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20241112073528.22042-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fail kvm_page_track_write_tracking_enabled() if VM type is TDX to make the
external page track user fail in kvm_page_track_register_notifier() since
TDX does not support write protection and hence page track.
No need to fail KVM internal users of page track (i.e. for shadow page),
because TDX is always with EPT enabled and currently TDX module does not
emulate and send VMLAUNCH/VMRESUME VMExits to VMM.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Yuan Yao <yuan.yao@linux.intel.com>
Message-ID: <20241112073515.22028-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Export a function to walk down the TDP without modifying it and simply
check if a GPA is mapped.
Future changes will support pre-populating TDX private memory. In order to
implement this KVM will need to check if a given GFN is already
pre-populated in the mirrored EPT. [1]
There is already a TDP MMU walker, kvm_tdp_mmu_get_walk() for use within
the KVM MMU that almost does what is required. However, to make sense of
the results, MMU internal PTE helpers are needed. Refactor the code to
provide a helper that can be used outside of the KVM MMU code.
Refactoring the KVM page fault handler to support this lookup usage was
also considered, but it was an awkward fit.
kvm_tdp_mmu_gpa_is_mapped() is based on a diff by Paolo Bonzini.
Link: https://lore.kernel.org/kvm/ZfBkle1eZFfjPI8l@google.com/ [1]
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241112073457.22011-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update attr_filter field to zap both private and shared mappings for TDX
when memslot is deleted.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20241112073426.21997-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX host key IDs (HKID) are limit resources in a machine, and the misc
cgroup lets the machine owner track their usage and limits the possibility
of abusing them outside the owner's control.
The cgroup v2 miscellaneous subsystem was introduced to control the
resource of AMD SEV & SEV-ES ASIDs. Likewise introduce HKIDs as a misc
resource.
Signed-off-by: Zhiming Hu <zhiming.hu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For TDX, the maxpa (CPUID.0x80000008.EAX[7:0]) is fixed as native and
the max_gpa (CPUID.0x80000008.EAX[23:16]) is configurable and used
to configure the EPT level and GPAW.
Use max_gpa to determine the TDP level.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement an IOCTL to allow userspace to read the CPUID bit values for a
configured TD.
The TDX module doesn't provide the ability to set all CPUID bits. Instead
some are configured indirectly, or have fixed values. But it does allow
for the final resulting CPUID bits to be read. This information will be
useful for userspace to understand the configuration of the TD, and set
KVM's copy via KVM_SET_CPUID2.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix subleaf mask check (Binbin)
- Search all possible sub-leafs (Francesco Lavra)
- Reduce off-by-one error sensitve code (Francesco, Xiaoyao)
- Handle buffers too small from userspace (Xiaoyao)
- Read max CPUID from TD instead of using fixed values (Xiaoyao)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TD guest vcpu needs TDX specific initialization before running. Repurpose
KVM_MEMORY_ENCRYPT_OP to vcpu-scope, add a new sub-command
KVM_TDX_INIT_VCPU, and implement the callback for it.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix comment: https://lore.kernel.org/kvm/Z36OYfRW9oPjW8be@google.com/
(Sean)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement vcpu related stubs for TDX for create, reset and free.
For now, create only the features that do not require the TDX SEAMCALL.
The TDX specific vcpu initialization will be handled by KVM_TDX_INIT_VCPU.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Use lapic_in_kernel() (Nikolay Borisov)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Destroying TDX guest requires there's at least one cpu online for each
package, because reclaiming the TDX KeyID of the guest (as part of the
teardown process) requires to call some SEAMCALL (on any cpu) on all
packages.
Do not offline the last cpu of one package when there's any TDX guest
running, otherwise KVM may not be able to teardown TDX guest resulting
in leaking of TDX KeyID and other resources like TDX guest control
structure pages.
Implement the TDX version 'offline_cpu()' to prevent the cpu from going
offline if it is the last cpu on the package.
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX KVM doesn't support PMU yet, it's future work of TDX KVM support as
another patch series. For now, handle TDX by updating vcpu_to_lbr_desc()
and vcpu_to_lbr_records() to return NULL.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Add pragma poison for to_vmx() (Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After the crypto-protection key has been configured, TDX requires a
VM-scope initialization as a step of creating the TDX guest. This
"per-VM" TDX initialization does the global configurations/features that
the TDX guest can support, such as guest's CPUIDs (emulated by the TDX
module), the maximum number of vcpus etc.
Because there is no room in KVM_CREATE_VM to pass all the required
parameters, introduce a new ioctl KVM_TDX_INIT_VM and mark the VM as
TD_STATE_UNINITIALIZED until it is invoked.
This "per-VM" TDX initialization must be done before any "vcpu-scope" TDX
initialization; KVM_TDX_INIT_VM IOCTL must be invoked before the creation
of vCPUs.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
CPUID values are provided for TDX virtual machines as part of the
KVM_TDX_INIT_VM ioctl. Unlike KVM_SET_CPUID2, TDX will need to
examine the leaves, either to validate against the CPUIDs listed
in the TDX modules configuration or to fill other controls with
matching values.
Since there is an existing function to look up a leaf/index pair
into a given list of CPUID entries, export it as kvm_find_cpuid_entry2().
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Change to report the KVM_CAP_MAX_VCPUS extension from globally to per-VM
to allow userspace to be able to query maximum vCPUs for TDX guest via
checking the KVM_CAP_MAX_VCPU extension on per-VM basis.
Today KVM x86 reports KVM_MAX_VCPUS as guest's maximum vCPUs for all
guests globally, and userspace, i.e. Qemu, queries the KVM_MAX_VCPUS
extension globally but not on per-VM basis.
TDX has its own limit of maximum vCPUs it can support for all TDX guests
in addition to KVM_MAX_VCPUS. TDX module reports this limit via the
MAX_VCPU_PER_TD global metadata. Different modules may report different
values. In practice, the reported value reflects the maximum logical
CPUs that ALL the platforms that the module supports can possibly have.
Note some old modules may also not support this metadata, in which case
the limit is U16_MAX.
The current way to always report KVM_MAX_VCPUS in the KVM_CAP_MAX_VCPUS
extension is not enough for TDX. To accommodate TDX, change to report
the KVM_CAP_MAX_VCPUS extension on per-VM basis.
Specifically, override kvm->max_vcpus in tdx_vm_init() for TDX guest,
and report kvm->max_vcpus in the KVM_CAP_MAX_VCPUS extension check.
Change to report "the number of logical CPUs the platform has" as the
maximum vCPUs for TDX guest. Simply forwarding the MAX_VCPU_PER_TD
reported by the TDX module would result in an unpredictable ABI because
the reported value to userspace would be depending on whims of TDX
modules.
This works in practice because of the MAX_VCPU_PER_TD reported by the
TDX module will never be smaller than the one reported to userspace.
But to make sure KVM never reports an unsupported value, sanity check
the MAX_VCPU_PER_TD reported by TDX module is not smaller than the
number of logical CPUs the platform has, otherwise refuse to use TDX.
Note, when creating a TDX guest, TDX actually requires the "maximum
vCPUs for _this_ TDX guest" as an input to initialize the TDX guest.
But TDX guest's maximum vCPUs is not part of TDREPORT thus not part of
attestation, thus there's no need to allow userspace to explicitly
_configure_ the maximum vCPUs on per-VM basis. KVM will simply use
kvm->max_vcpus as input when initializing the TDX guest.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement managing the TDX private KeyID to implement, create, destroy
and free for a TDX guest.
When creating at TDX guest, assign a TDX private KeyID for the TDX guest
for memory encryption, and allocate pages for the guest. These are used
for the Trust Domain Root (TDR) and Trust Domain Control Structure (TDCS).
On destruction, free the allocated pages, and the KeyID.
Before tearing down the private page tables, TDX requires the guest TD to
be destroyed by reclaiming the KeyID. Do it in the vm_pre_destroy() kvm_x86_ops
hook. The TDR control structures can be freed in the vm_destroy() hook,
which runs last.
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Fix build issue in kvm-coco-queue
- Init ret earlier to fix __tdx_td_init() error handling. (Chao)
- Standardize -EAGAIN for __tdx_td_init() retry errors (Rick)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX KVM needs system-wide information about the TDX module. Generate the
data based on tdx_sysinfo td_conf CPUID data.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
---
- Clarify comment about EAX[23:16] in td_init_cpuid_entry2() (Xiaoyao)
- Add comment for configurable CPUID bits (Xiaoyao)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_MEMORY_ENCRYPT_OP was introduced for VM-scoped operations specific for
guest state-protected VM. It defined subcommands for technology-specific
operations under KVM_MEMORY_ENCRYPT_OP. Despite its name, the subcommands
are not limited to memory encryption, but various technology-specific
operations are defined. It's natural to repurpose KVM_MEMORY_ENCRYPT_OP
for TDX specific operations and define subcommands.
Add a place holder function for TDX specific VM-scoped ioctl as mem_enc_op.
TDX specific sub-commands will be added to retrieve/pass TDX specific
parameters. Make mem_enc_ioctl non-optional as it's always filled.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
---
- Drop the misleading "defined for consistency" line. It's a copy-paste
error introduced in the earlier patches. Earlier there was padding at
the end to match struct kvm_sev_cmd size. (Tony)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add helper functions to print out errors from the TDX module in a uniform
manner.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add error codes for the TDX SEAMCALLs both for TDX VMM side for TDH
SEAMCALL and TDX guest side for TDG.VP.VMCALL. KVM issues the TDX
SEAMCALLs and checks its error code. KVM handles hypercall from the TDX
guest and may return an error. So error code for the TDX guest is also
needed.
TDX SEAMCALL uses bits 31:0 to return more information, so these error
codes will only exactly match RAX[63:32]. Error codes for TDG.VP.VMCALL is
defined by TDX Guest-Host-Communication interface spec.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20241030190039.77971-14-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define architectural definitions for KVM to issue the TDX SEAMCALLs.
Structures and values that are architecturally defined in the TDX module
specifications the chapter of ABI Reference.
Co-developed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
---
- Drop old duplicate defines, the x86 core exports what's needed (Kai)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add TDX's own VM and vCPU structures as placeholder to manage and run
TDX guests. Also add helper functions to check whether a VM/vCPU is
TDX or normal VMX one, and add helpers to convert between TDX VM/vCPU
and KVM VM/vCPU.
TDX protects guest VMs from malicious host. Unlike VMX guests, TDX
guests are crypto-protected. KVM cannot access TDX guests' memory and
vCPU states directly. Instead, TDX requires KVM to use a set of TDX
architecture-defined firmware APIs (a.k.a TDX module SEAMCALLs) to
manage and run TDX guests.
In fact, the way to manage and run TDX guests and normal VMX guests are
quite different. Because of that, the current structures
('struct kvm_vmx' and 'struct vcpu_vmx') to manage VMX guests are not
quite suitable for TDX guests. E.g., the majority of the members of
'struct vcpu_vmx' don't apply to TDX guests.
Introduce TDX's own VM and vCPU structures ('struct kvm_tdx' and 'struct
vcpu_tdx' respectively) for KVM to manage and run TDX guests. And
instead of building TDX's VM and vCPU structures based on VMX's, build
them directly based on 'struct kvm'.
As a result, TDX and VMX guests will have different VM size and vCPU
size/alignment.
Currently, kvm_arch_alloc_vm() uses 'kvm_x86_ops::vm_size' to allocate
enough space for the VM structure when creating guest. With TDX guests,
ideally, KVM should allocate the VM structure based on the VM type so
that the precise size can be allocated for VMX and TDX guests. But this
requires more extensive code change. For now, simply choose the maximum
size of 'struct kvm_tdx' and 'struct kvm_vmx' for VM structure
allocation for both VMX and TDX guests. This would result in small
memory waste for each VM which has smaller VM structure size but this is
acceptable.
For simplicity, use the same way for vCPU allocation too. Otherwise KVM
would need to maintain a separate 'kvm_vcpu_cache' for each VM type.
Note, updating the 'vt_x86_ops::vm_size' needs to be done before calling
kvm_ops_update(), which copies vt_x86_ops to kvm_x86_ops. However this
happens before TDX module initialization. Therefore theoretically it is
possible that 'kvm_x86_ops::vm_size' is set to size of 'struct kvm_tdx'
(when it's larger) but TDX actually fails to initialize at a later time.
Again the worst case of this is wasting couple of bytes memory for each
VM. KVM could choose to update 'kvm_x86_ops::vm_size' at a later time
depending on TDX's status but that would require base KVM module to
export either kvm_x86_ops or kvm_ops_update().
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
- Make to_kvm_tdx() and to_tdx() private to tdx.c (Francesco, Tony)
- Add pragma poison for to_vmx() (Paolo)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM will need to consult some essential TDX global information to create
and run TDX guests. Get the global information after initializing TDX.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20241030190039.77971-3-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Before KVM can use TDX to create and run TDX guests, TDX needs to be
initialized from two perspectives: 1) TDX module must be initialized
properly to a working state; 2) A per-cpu TDX initialization, a.k.a the
TDH.SYS.LP.INIT SEAMCALL must be done on any logical cpu before it can
run any other TDX SEAMCALLs.
The TDX host core-kernel provides two functions to do the above two
respectively: tdx_enable() and tdx_cpu_enable().
There are two options in terms of when to initialize TDX: initialize TDX
at KVM module loading time, or when creating the first TDX guest.
Choose to initialize TDX during KVM module loading time:
Initializing TDX module is both memory and CPU time consuming: 1) the
kernel needs to allocate a non-trivial size(~1/256) of system memory
as metadata used by TDX module to track each TDX-usable memory page's
status; 2) the TDX module needs to initialize this metadata, one entry
for each TDX-usable memory page.
Also, the kernel uses alloc_contig_pages() to allocate those metadata
chunks, because they are large and need to be physically contiguous.
alloc_contig_pages() can fail. If initializing TDX when creating the
first TDX guest, then there's chance that KVM won't be able to run any
TDX guests albeit KVM _declares_ to be able to support TDX.
This isn't good for the user.
On the other hand, initializing TDX at KVM module loading time can make
sure KVM is providing a consistent view of whether KVM can support TDX
to the user.
Always only try to initialize TDX after VMX has been initialized. TDX
is based on VMX, and if VMX fails to initialize then TDX is likely to be
broken anyway. Also, in practice, supporting TDX will require part of
VMX and common x86 infrastructure in working order, so TDX cannot be
enabled alone w/o VMX support.
There are two cases that can result in failure to initialize TDX: 1) TDX
cannot be supported (e.g., because of TDX is not supported or enabled by
hardware, or module is not loaded, or missing some dependency in KVM's
configuration); 2) Any unexpected error during TDX bring-up. For the
first case only mark TDX is disabled but still allow KVM module to be
loaded. For the second case just fail to load the KVM module so that
the user can be aware.
Because TDX costs additional memory, don't enable TDX by default. Add a
new module parameter 'enable_tdx' to allow the user to opt-in.
Note, the name tdx_init() has already been taken by the early boot code.
Use tdx_bringup() for initializing TDX (and tdx_cleanup() since KVM
doesn't actually teardown TDX). They don't match vt_init()/vt_exit(),
vmx_init()/vmx_exit() etc but it's not end of the world.
Also, once initialized, the TDX module cannot be disabled and enabled
again w/o the TDX module runtime update, which isn't supported by the
kernel. After TDX is enabled, nothing needs to be done when KVM
disables hardware virtualization, e.g., when offlining CPU, or during
suspend/resume. TDX host core-kernel code internally tracks TDX status
and can handle "multiple enabling" scenario.
Similar to KVM_AMD_SEV, add a new KVM_INTEL_TDX Kconfig to guide KVM TDX
code. Make it depend on INTEL_TDX_HOST but not replace INTEL_TDX_HOST
because in the longer term there's a use case that requires making
SEAMCALLs w/o KVM as mentioned by Dan [1].
Link: https://lore.kernel.org/6723fc2070a96_60c3294dc@dwillia2-mobl3.amr.corp.intel.com.notmuch/ [1]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <162f9dee05c729203b9ad6688db1ca2960b4b502.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add vt_init() and vt_exit() as the new module init/exit functions and
refactor existing vmx_init()/vmx_exit() as helper to make room for TDX
specific initialization and teardown.
To support TDX, KVM will need to enable TDX during KVM module loading
time. Enabling TDX requires enabling hardware virtualization first so
that all online CPUs (and the new CPU going online) are in post-VMXON
state.
Currently, the vmx_init() flow is:
1) hv_init_evmcs(),
2) kvm_x86_vendor_init(),
3) Other VMX specific initialization,
4) kvm_init()
The kvm_x86_vendor_init() invokes kvm_x86_init_ops::hardware_setup() to
do VMX specific hardware setup and calls kvm_update_ops() to initialize
kvm_x86_ops to VMX's version.
TDX will have its own version for most of kvm_x86_ops callbacks. It
would be nice if kvm_x86_init_ops::hardware_setup() could also be used
for TDX, but in practice it cannot. The reason is, as mentioned above,
TDX initialization requires hardware virtualization having been enabled,
which must happen after kvm_update_ops(), but hardware_setup() is done
before that.
Also, TDX is based on VMX, and it makes sense to only initialize TDX
after VMX has been initialized. If VMX fails to initialize, TDX is
likely broken anyway.
So the new flow of KVM module init function will be:
1) Current VMX initialization code in vmx_init() before kvm_init(),
2) TDX initialization,
3) kvm_init()
Split vmx_init() into two parts based on above 1) and 3) so that TDX
initialization can fit in between. Make part 1) as the new helper
vmx_init(). Introduce vt_init() as the new module init function which
calls vmx_init() and kvm_init(). TDX initialization will be added
later.
Do the same thing for vmx_exit()/vt_exit().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <3f23f24098bdcf42e213798893ffff7cdc7103be.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_CAP_SYNC_REGS does not make sense for VMs with protected guest state,
since the register values cannot actually be written. Return 0
when using the VM-level KVM_CHECK_EXTENSION ioctl, and accordingly
return -EINVAL from KVM_RUN if the valid/dirty fields are nonzero.
However, on exit from KVM_RUN userspace could have placed a nonzero
value into kvm_run->kvm_valid_regs, so check guest_state_protected
again and skip store_regs() in that case.
Cc: stable@vger.kernel.org
Fixes: 517987e3fb19 ("KVM: x86: add fields to struct kvm_arch for CoCo features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250306202923.646075-1-pbonzini@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add guest_tsc_protected member to struct kvm_arch_vcpu and prohibit
changing TSC offset/multiplier when guest_tsc_protected is true.
X86 confidential computing technology defines protected guest TSC so that
the VMM can't change the TSC offset/multiplier once vCPU is initialized.
SEV-SNP defines Secure TSC as optional, whereas TDX mandates it.
KVM has common logic on x86 that tries to guess or adjust TSC
offset/multiplier for better guest TSC and TSC interrupt latency
at KVM vCPU creation (kvm_arch_vcpu_postcreate()), vCPU migration
over pCPU (kvm_arch_vcpu_load()), vCPU TSC device attributes
(kvm_arch_tsc_set_attr()) and guest/host writing to TSC or TSC adjust MSR
(kvm_set_msr_common()).
The current x86 KVM implementation conflicts with protected TSC because the
VMM can't change the TSC offset/multiplier.
Because KVM emulates the TSC timer or the TSC deadline timer with the TSC
offset/multiplier, the TSC timer interrupts is injected to the guest at the
wrong time if the KVM TSC offset is different from what the TDX module
determined.
Originally this issue was found by cyclic test of rt-test [1] as the
latency in TDX case is worse than VMX value + TDX SEAMCALL overhead. It
turned out that the KVM TSC offset is different from what the TDX module
determines.
Disable or ignore the KVM logic to change/adjust the TSC offset/multiplier
somehow, thus keeping the KVM TSC offset/multiplier the same as the
value of the TDX module. Writes to MSR_IA32_TSC are also blocked as
they amount to a change in the TSC offset.
[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <3a7444aec08042fe205666864b6858910e86aa98.1728719037.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Push down setting vcpu.arch.user_set_tsc to true from kvm_synchronize_tsc()
to __kvm_synchronize_tsc() so that the two callers don't have to modify
user_set_tsc directly as preparation.
Later, prohibit changing TSC synchronization for TDX guests to modify
__kvm_synchornize_tsc() change. We don't want to touch caller sites not to
change user_set_tsc.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <62b1a7a35d6961844786b6e47e8ecb774af7a228.1728719037.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX needs to free the TDR control structures last, after all paging structures
have been torn down; move the vm_destroy callback at a suitable place.
The new place is also okay for AMD; the main difference is that the
MMU has been torn down and, if anything, that is better done before
the SNP ASID is released.
Extracted from a patch by Yan Zhao.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
Remove dead/unreachable (and misguided) code in KVM's processing of
0x80000022. The case statement breaks early if PERFMON_V2 isnt supported,
i.e. kvm_cpu_cap_has(X86_FEATURE_PERFMON_V2) must be true when KVM reaches
the code code to setup EBX.
Note, early versions of the patch that became commit 94cdeebd8211 ("KVM:
x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022") didn't break
early on lack of PERFMON_V2 support, and instead enumerated the effective
number of counters KVM could emulate. All of that code was flawed, e.g.
the APM explicitly states EBX is valid only for v2.
Performance Monitoring Version 2 supported. When set,
CPUID_Fn8000_0022_EBX reports the number of available performance counters.
When the flaw of not respecting v2 support was addressed, the misguided
stuffing of the number of counters got left behind.
Link: https://lore.kernel.org/all/20220919093453.71737-4-likexu@tencent.com
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-2-xiaoyao.li@intel.com
[sean: elaborate on the situation a bit more, add Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert the non-asm-goto version of the inline asm in __vmcs_readl() to
use named operands, similar to its asm-goto version.
Do this in preparation of changing the ASM_CALL_CONSTRAINT primitive.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: linux-kernel@vger.kernel.org
|
|
Extract the checking of entry/exit pairs to a helper macro so that the
code can be reused to process the upcoming "secondary" exit controls (the
primary exit controls field is out of bits). Use a macro instead of a
function to support different sized variables (all secondary exit controls
will be optional and so the MSR doesn't have the fixed-0/fixed-1 split).
Taking the largest size as input is trivial, but handling the modification
of KVM's to-be-used controls is much trickier, e.g. would require bitmap
games to clear bits from a 32-bit bitmap vs. a 64-bit bitmap.
Opportunistically add sanity checks to ensure the size of the controls
match (yay, macro!), e.g. to detect bugs where KVM passes in the pairs for
primary exit controls, but its variable for the secondary exit controls.
To help users triage mismatches, print the control bits that are checked,
not just the actual value. For the foreseeable future, that provides
enough information for a user to determine which fields mismatched. E.g.
until secondary entry controls comes along, all entry bits and thus all
error messages are guaranteed to be unique.
To avoid returning from a macro, which can get quite dangerous, simply
process all pairs even if error_on_inconsistent_vmcs_config is set. The
speed at which KVM rejects module load is not at all interesting.
Keep the error message a "once" printk, even though it would be nice to
print out all mismatching pairs. In practice, the most likely scenario is
that a single pair will mismatch on all CPUs. Printing all mismatches
generates redundant messages in that situation, and can be extremely noisy
on systems with large numbers of CPUs. If a CPU has multiple mismatches,
not printing every bad pair is the least of the user's concerns.
Cc: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227005353.3216123-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
