| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
do_page_fault(), like other exceptions, is already covered by
user_enter() and user_exit() when the exception triggers in userspace.
As explained in:
8c84014f3bbb11 ("x86/entry: Remove exception_enter() from most trap handlers")
exception_enter/exit() only remained to handle possible page fault from
kernel mode while context tracking is in CONTEXT_USER mode, ie: on
kernel entry before we manage to call user_exit(). The only known
offender was do_fast_syscall_32() fetching EBP register from where
vDSO stashed it.
Meanwhile this got fixed in:
9999c8c01f34c9 ("x86/entry: Call enter_from_user_mode() with IRQs off")
that moved enter_from_user_mode() before the call to get_user().
So we can safely remove it now.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191227163612.10039-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address: 000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2: 000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make #GP exceptions caused by out-of-bounds KASAN shadow accesses easier
to understand by computing the address of the original access and
printing that. More details are in the comments in the patch.
This turns an error like this:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault, probably for non-canonical address
0xe017577ddf75b7dd: 0000 [#1] PREEMPT SMP KASAN PTI
into this:
general protection fault, probably for non-canonical address
0xe017577ddf75b7dd: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: maybe wild-memory-access in range
[0x00badbeefbadbee8-0x00badbeefbadbeef]
The hook is placed in architecture-independent code, but is currently
only wired up to the X86 exception handler because I'm not sufficiently
familiar with the address space layout and exception handling mechanisms
on other architectures.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191218231150.12139-4-jannh@google.com
|
|
Conflicts:
init/main.c
lib/Kconfig.debug
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
type definitions
- Untangle the somewhat incestous way of how VMALLOC_START is used all across the
kernel, but is, on x86, defined deep inside one of the lowest level page table headers.
It doesn't help that vmalloc.h only includes a single asm header:
#include <asm/page.h> /* pgprot_t */
So there was no existing cross-arch way to decouple address layout
definitions from page.h details. I used this:
#ifndef VMALLOC_START
# include <asm/vmalloc.h>
#endif
This way every architecture that wants to simplify page.h can do so.
- Also on x86 we had a couple of LDT related inline functions that used
the late-stage address space layout positions - but these could be
uninlined without real trouble - the end result is cleaner this way as
well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20191123153023.bj6m66scjeubhbjg@4978f4969bb8
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
pat.h is a file whose main purpose is to provide the memtype_*() APIs.
PAT is the low level hardware mechanism - but the high level abstraction
is memtype.
So name the header <memtype.h> as well - this goes hand in hand with memtype.c
and memtype_interval.c.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Half of our memtype APIs are memtype_ prefixed, the other half are _memtype suffixed:
reserve_memtype()
free_memtype()
kernel_map_sync_memtype()
io_reserve_memtype()
io_free_memtype()
memtype_check_insert()
memtype_erase()
memtype_lookup()
memtype_copy_nth_element()
Use prefixes consistently, like most other modern kernel APIs:
reserve_memtype() => memtype_reserve()
free_memtype() => memtype_free()
kernel_map_sync_memtype() => memtype_kernel_map_sync()
io_reserve_memtype() => memtype_reserve_io()
io_free_memtype() => memtype_free_io()
memtype_check_insert() => memtype_check_insert()
memtype_erase() => memtype_erase()
memtype_lookup() => memtype_lookup()
memtype_copy_nth_element() => memtype_copy_nth_element()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
- pat.c offers, dominantly, the memtype APIs - so rename it to memtype.c.
- pageattr.c is offering, primarily, the set_memory*() page attribute APIs,
which is offered via the <asm/set_memory.h> header: name the .c file
along the same pattern.
I.e. perform these renames, and move them all next to each other in arch/x86/mm/pat/:
pat.c => memtype.c
pat_internal.h => memtype.h
pat_interval.c => memtype_interval.c
pageattr.c => set_memory.c
pageattr-test.c => cpa-test.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Right now we have these variables that impact the PAT initialization sequence:
pat_disabled
boot_cpu_done
pat_initialized
init_cm_done
Some have a pat_ prefix, some not, and the naming is random,
which makes their purpose rather opaque.
Name them consistently and according to their role:
pat_disabled
pat_bp_initialized
pat_bp_enabled
pat_cm_initialized
Also rename pat_bsp_init() => pat_bp_init(), to use the canonical
abbreviation.
Also add a warning for double calls of init_cache_modes(), the call chains
leading to this are complex and I couldn't convince myself that we never
call this function twice - so utilize the flag for a debug check.
No change in functionality intended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
parameter use
We have quite a zoo of 'struct memtype' variable nomenclature:
new
entry
print_entry
data
match
out
memtype
Beyond the randomness, some of these are outright confusing, especially
when used in larger functions.
Standardize them:
entry
entry_new
entry_old
entry_print
entry_match
entry_out
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Simplify/streamline the quirky handling of the pat_pagerange_is_ram() logic,
and get rid of the 'err' local variable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
/sys/kernel/debug/x86/pat_memtype_list, similar to the E820 debug printouts
Before:
write-back @ 0xbdfa9000-0xbdfaa000
write-back @ 0xbdfaa000-0xbdfab000
write-back @ 0xbdfab000-0xbdfac000
uncached-minus @ 0xc0000000-0xd0000000
uncached-minus @ 0xd0900000-0xd0920000
uncached-minus @ 0xd0920000-0xd0940000
uncached-minus @ 0xd0940000-0xd0960000
uncached-minus @ 0xd0960000-0xd0980000
uncached-minus @ 0xd0980000-0xd0981000
uncached-minus @ 0xd0990000-0xd0991000
uncached-minus @ 0xd09a0000-0xd09a1000
uncached-minus @ 0xd09b0000-0xd09b1000
uncached-minus @ 0xd0d00000-0xd0d01000
uncached-minus @ 0xd0d10000-0xd0d11000
uncached-minus @ 0xd0d20000-0xd0d21000
uncached-minus @ 0xd0d40000-0xd0d41000
uncached-minus @ 0xfed00000-0xfed01000
uncached-minus @ 0xfed1f000-0xfed20000
uncached-minus @ 0xfed40000-0xfed41000
After:
PAT: [mem 0x00000000bdf8e000-0x00000000bdfa8000] write-back
PAT: [mem 0x00000000bdfa9000-0x00000000bdfaa000] write-back
PAT: [mem 0x00000000bdfaa000-0x00000000bdfab000] write-back
PAT: [mem 0x00000000bdfab000-0x00000000bdfac000] write-back
PAT: [mem 0x00000000c0000000-0x00000000d0000000] uncached-minus
PAT: [mem 0x00000000d0900000-0x00000000d0920000] uncached-minus
PAT: [mem 0x00000000d0920000-0x00000000d0940000] uncached-minus
PAT: [mem 0x00000000d0940000-0x00000000d0960000] uncached-minus
PAT: [mem 0x00000000d0960000-0x00000000d0980000] uncached-minus
PAT: [mem 0x00000000d0980000-0x00000000d0981000] uncached-minus
PAT: [mem 0x00000000d0990000-0x00000000d0991000] uncached-minus
PAT: [mem 0x00000000d09a0000-0x00000000d09a1000] uncached-minus
PAT: [mem 0x00000000d09b0000-0x00000000d09b1000] uncached-minus
PAT: [mem 0x00000000fed1f000-0x00000000fed20000] uncached-minus
PAT: [mem 0x00000000fed40000-0x00000000fed41000] uncached-minus
The advantage is that it's easier to parse at a glance - and the tree is ordered
by start address, which is now reflected in putting the start address in the first
column.
This is also now similar to how we print e820 entries:
BIOS-e820: [mem 0x00000000bafda000-0x00000000bb3d3fff] usable
BIOS-e820: [mem 0x00000000bb3d4000-0x00000000bdd2efff] reserved
BIOS-e820: [mem 0x00000000bdd2f000-0x00000000bddccfff] ACPI NVS
BIOS-e820: [mem 0x00000000bddcd000-0x00000000bdea0fff] ACPI data
BIOS-e820: [mem 0x00000000bdea1000-0x00000000bdf2efff] ACPI NVS
Since this is a debugfs file not used by tools there's no known ABI dependencies.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Right now we have these four types of PAT-disabled boot messages:
x86/PAT: PAT support disabled.
x86/PAT: PAT MSR is 0, disabled.
x86/PAT: MTRRs disabled, skipping PAT initialization too.
x86/PAT: PAT not supported by CPU.
The first message is ambiguous in that it doesn't signal that PAT is off
due to a boot option.
The second message doesn't really make it clear that this is the MSR value
during early bootup and it's the firmware environment that disabled PAT
support.
The fourth message doesn't really make it clear that we disable PAT support
because CONFIG_MTRR is off in the kernel.
Clarify, harmonize and fix the spelling in these user-visible messages:
x86/PAT: PAT support disabled via boot option.
x86/PAT: PAT support disabled by the firmware.
x86/PAT: PAT support disabled because CONFIG_MTRR is disabled in the kernel.
x86/PAT: PAT not supported by the CPU.
Also add a fifth message, in case PAT support is disabled at build time:
x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel.
Previously we'd just silently return from pat_init() without giving any indication
that PAT support is off.
Finally, clarify/extend some of the comments related to PAT initialization.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
code a bit
Tidy up the code:
- add comments explaining the PAT code, the role of the functions and the logic
- fix various typos and grammar while at it
- simplify the file-scope memtype_interval_*() namespace to interval_*()
- simplify stylistic complications such as unnecessary linebreaks
or convoluted control flow
- use the simpler '#ifdef CONFIG_*' pattern instead of '#if defined(CONFIG_*)' pattern
- remove the non-idiomatic newline between late_initcall() and its function definition
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge updates from Andrew Morton:
"Incoming:
- a small number of updates to scripts/, ocfs2 and fs/buffer.c
- most of MM
I still have quite a lot of material (mostly not MM) staged after
linux-next due to -next dependencies. I'll send those across next week
as the preprequisites get merged up"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
mm/page_io.c: annotate refault stalls from swap_readpage
mm/Kconfig: fix trivial help text punctuation
mm/Kconfig: fix indentation
mm/memory_hotplug.c: remove __online_page_set_limits()
mm: fix typos in comments when calling __SetPageUptodate()
mm: fix struct member name in function comments
mm/shmem.c: cast the type of unmap_start to u64
mm: shmem: use proper gfp flags for shmem_writepage()
mm/shmem.c: make array 'values' static const, makes object smaller
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
userfaultfd: wrap the common dst_vma check into an inlined function
userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
userfaultfd: use vma_pagesize for all huge page size calculation
mm/madvise.c: use PAGE_ALIGN[ED] for range checking
mm/madvise.c: replace with page_size() in madvise_inject_error()
mm/mmap.c: make vma_merge() comment more easy to understand
mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
autonuma: reduce cache footprint when scanning page tables
autonuma: fix watermark checking in migrate_balanced_pgdat()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Various fixes:
- Fix the PAT performance regression that downgraded write-combining
device memory regions to uncached.
- There's been a number of bugs in 32-bit double fault handling -
hopefully all fixed now.
- Fix an LDT crash
- Fix an FPU over-optimization that broke with GCC9 code
optimizations.
- Misc cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Fix off-by-one bugs in interval tree search
x86/ioperm: Save an indentation level in tss_update_io_bitmap()
x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
x86/entry/32: Remove unused 'restore_all_notrace' local label
x86/ptrace: Document FSBASE and GSBASE ABI oddities
x86/ptrace: Remove set_segment_reg() implementations for current
x86/traps: die() instead of panicking on a double fault
x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit
x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area
x86/doublefault/32: Rename doublefault.c to doublefault_32.c
x86/traps: Disentangle the 32-bit and 64-bit doublefault code
lkdtm: Add a DOUBLE_FAULT crash type on x86
selftests/x86/single_step_syscall: Check SYSENTER directly
x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()
|
|
In the case where KASAN directly allocates memory to back vmalloc space,
don't map the early shadow page over it.
We prepopulate pgds/p4ds for the range that would otherwise be empty.
This is required to get it synced to hardware on boot, allowing the
lower levels of the page tables to be filled dynamically.
Link: http://lkml.kernel.org/r/20191031093909.9228-5-dja@axtens.net
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's a bug in the new PAT code, the conversion of memtype_check_conflict()
is buggy:
8d04a5f97a5f: ("x86/mm/pat: Convert the PAT tree to a generic interval tree")
dprintk("Overlap at 0x%Lx-0x%Lx\n", match->start, match->end);
found_type = match->type;
- node = rb_next(&match->rb);
- while (node) {
- match = rb_entry(node, struct memtype, rb);
-
- if (match->start >= end) /* Checked all possible matches */
- goto success;
-
- if (is_node_overlap(match, start, end) &&
- match->type != found_type) {
+ match = memtype_interval_iter_next(match, start, end);
+ while (match) {
+ if (match->type != found_type)
goto failure;
- }
- node = rb_next(&match->rb);
+ match = memtype_interval_iter_next(match, start, end);
}
Note how the '>= end' condition to end the interval check, got converted
into:
+ match = memtype_interval_iter_next(match, start, end);
This is subtly off by one, because the interval trees interfaces require
closed interval parameters:
include/linux/interval_tree_generic.h
/* \
* Iterate over intervals intersecting [start;last] \
* \
* Note that a node's interval intersects [start;last] iff: \
* Cond1: ITSTART(node) <= last \
* and \
* Cond2: start <= ITLAST(node) \
*/ \
...
if (ITSTART(node) <= last) { /* Cond1 */ \
if (start <= ITLAST(node)) /* Cond2 */ \
return node; /* node is leftmost match */ \
[start;last] is a closed interval (note that '<= last' check) - while the
PAT 'end' parameter is 1 byte beyond the end of the range, because
ioremap() and the other mapping APIs usually use the [start,end)
half-open interval, derived from 'size'.
This is what ioremap() does for example:
/*
* Mappings have to be page-aligned
*/
offset = phys_addr & ~PAGE_MASK;
phys_addr &= PHYSICAL_PAGE_MASK;
size = PAGE_ALIGN(last_addr+1) - phys_addr;
retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
pcm, &new_pcm);
phys_addr+size will be on a page boundary, after the last byte of the
mapped interval.
So the correct parameter to use in the interval tree searches is not
'end' but 'end-1'.
This could have relevance if conflicting PAT ranges are exactly adjacent,
for example a future WC region is followed immediately by an already
mapped UC- region - in this case memtype_check_conflict() would
incorrectly deny the WC memtype region and downgrade the memtype to UC-.
BTW., rather annoyingly this downgrading is done silently in
memtype_check_insert():
int memtype_check_insert(struct memtype *new,
enum page_cache_mode *ret_type)
{
int err = 0;
err = memtype_check_conflict(new->start, new->end, new->type, ret_type);
if (err)
return err;
if (ret_type)
new->type = *ret_type;
memtype_interval_insert(new, &memtype_rbroot);
return 0;
}
So on such a conflict we'd just silently get UC- in *ret_type, and write
it into the new region, never the wiser ...
So assuming that the patch below fixes the primary bug the diagnostics
side of ioremap() cache attribute downgrades would be another thing to
fix.
Anyway, I checked all the interval-tree iterations, and most of them are
off by one - but I think the one related to memtype_check_conflict() is
the one causing this particular performance regression.
The only correct interval-tree searches were these two:
arch/x86/mm/pat_interval.c: match = memtype_interval_iter_first(&memtype_rbroot, 0, ULONG_MAX);
arch/x86/mm/pat_interval.c: match = memtype_interval_iter_next(match, 0, ULONG_MAX);
The ULONG_MAX was hiding the off-by-one in plain sight. :-)
Note that the bug was probably benign in the sense of implementing a too
strict cache attribute conflict policy and downgrading cache attributes,
so AFAICS the worst outcome of this bug would be a performance regression,
not any instabilities.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mariusz Ceier <mceier+kernel@gmail.com>
Tested-by: Mariusz Ceier <mceier@gmail.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191201144947.GA4167@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
|
|
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
|
|
With the last and only user of these functions gone (ftrace) remove
them as well to avoid ever growing new users.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.819095320@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
|
|
There are three problems with the current layout of the doublefault
stack and TSS. First, the TSS is only cacheline-aligned, which is
not enough -- if the hardware portion of the TSS (struct x86_hw_tss)
crosses a page boundary, horrible things happen [0]. Second, the
stack and TSS are global, so simultaneous double faults on different
CPUs will cause massive corruption. Third, the whole mechanism
won't work if user CR3 is loaded, resulting in a triple fault [1].
Let the doublefault stack and TSS share a page (which prevents the
TSS from spanning a page boundary), make it percpu, and move it into
cpu_entry_area. Teach the stack dump code about the doublefault
stack.
[0] Real hardware will read past the end of the page onto the next
*physical* page if a task switch happens. Virtual machines may
have any number of bugs, and I would consider it reasonable for
a VM to summarily kill the guest if it tries to task-switch to
a page-spanning TSS.
[1] Real hardware triple faults. At least some VMs seem to hang.
I'm not sure what's going on.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.
This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.
But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.
In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:
for (address = VMALLOC_START & PMD_MASK;
address >= TASK_SIZE_MAX && address < FIXADDR_TOP;
address += PMD_SIZE) {
struct page *page;
Because iterating up to FIXADDR_TOP will involve a lot of non-vmalloc
address ranges:
VMALLOC -> PKMAP -> LDT -> CPU_ENTRY_AREA -> FIX_ADDR
This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).
This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.
To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.
So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.
The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.
This change fixes the ldt_gdt selftest in my setup.
[ mingo: Fixed up the changelog to explain the logic and modified the
copying to only happen up until VMALLOC_END. ]
Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Fixes: 7757d607c6b3: ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32")
Link: https://lkml.kernel.org/r/20191126111119.GA110513@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 iopl updates from Ingo Molnar:
"This implements a nice simplification of the iopl and ioperm code that
Thomas Gleixner discovered: we can implement the IO privilege features
of the iopl system call by using the IO permission bitmap in
permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space
if they change the interrupt flag.
This implements that feature, with testing facilities and related
cleanups"
[ "Simplification" may be an over-statement. The main goal is to avoid
the cli/sti of iopl by effectively implementing the IO port access
parts of iopl in terms of ioperm.
This may end up not workign well in case people actually depend on
cli/sti being available, or if there are mixed uses of iopl and
ioperm. We will see.. - Linus ]
* 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/ioperm: Fix use of deprecated config option
x86/entry/32: Clarify register saving in __switch_to_asm()
selftests/x86/iopl: Extend test to cover IOPL emulation
x86/ioperm: Extend IOPL config to control ioperm() as well
x86/iopl: Remove legacy IOPL option
x86/iopl: Restrict iopl() permission scope
x86/iopl: Fixup misleading comment
selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
x86/ioperm: Share I/O bitmap if identical
x86/ioperm: Remove bitmap if all permissions dropped
x86/ioperm: Move TSS bitmap update to exit to user work
x86/ioperm: Add bitmap sequence number
x86/ioperm: Move iobitmap data into a struct
x86/tss: Move I/O bitmap data into a seperate struct
x86/io: Speedup schedule out of I/O bitmap user
x86/ioperm: Avoid bitmap allocation if no permissions are set
x86/ioperm: Simplify first ioperm() invocation logic
x86/iopl: Cleanup include maze
x86/tss: Fix and move VMX BUILD_BUG_ON()
x86/cpu: Unify cpu_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"These are the fixes left over from the v5.4 cycle:
- Various low level 32-bit entry code fixes and improvements by Andy
Lutomirski, Peter Zijlstra and Thomas Gleixner.
- Fix 32-bit Xen PV breakage, by Jan Beulich"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- A PAT series from Davidlohr Bueso, which simplifies the memtype
rbtree by using the interval tree helpers. (There's more cleanups
in this area queued up, but they didn't make the merge window.)
- Also flip over CONFIG_X86_5LEVEL to default-y. This might draw in a
few more testers, as all the major distros are going to have
5-level paging enabled by default in their next iterations.
- Misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Rename pat_rbtree.c to pat_interval.c
x86/mm/pat: Drop the rbt_ prefix from external memtype calls
x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functions
x86/mm/pat: Convert the PAT tree to a generic interval tree
x86/mm: Clean up the pmd_read_atomic() comments
x86/mm: Fix function name typo in pmd_read_atomic() comment
x86/cpu: Clean up intel_tlb_table[]
x86/mm: Enable 5-level paging support by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 syscall entry updates from Ingo Molnar:
"These changes relate to the preparatory cleanup of syscall function
type signatures - to fix indirect call mismatches with Control-Flow
Integrity (CFI) checking.
No change in behavior intended"
* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use the correct function type for native_set_fixmap()
syscalls/x86: Fix function types in COND_SYSCALL
syscalls/x86: Use the correct function type for sys_ni_syscall
syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn
syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0
syscalls/x86: Use the correct function type in SYSCALL_DEFINE0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main changes were:
- Extend the boot protocol to allow future extensions without hitting
the setup_header size limit.
- Add quirk to devicetree systems to disable the RTC unless it's
listed as a supported device.
- Fix ld.lld linker pedantry"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Introduce setup_indirect
x86/boot: Introduce kernel_info.setup_type_max
x86/boot: Introduce kernel_info
x86/init: Allow DT configured systems to disable RTC at boot time
x86/realmode: Explicitly set entry point via ENTRY in linker script
|
|
'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 objtool, cleanup, and apic updates from Ingo Molnar:
"Objtool:
- Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most
distros are still on gawk 4.2.x.
Cleanup:
- Misc cleanups, plus the removal of obsolete code such as Calgary
IOMMU support, which code hasn't seen any real testing in a long
time and there's no known users left.
apic:
- Two changes: a cleanup and a fix for an (old) race for oneshot
threaded IRQ handlers"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix awk regexp warnings
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove unused asm/rio.h
x86: Fix typos in comments
x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h>
x86/pci: Remove pci_64.h
x86: Remove the calgary IOMMU driver
x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments
x86/kdump: Remove the unused crash_copy_backup_region()
x86/nmi: Remove stale EDAC include leftover
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Rename misnamed functions
x86/ioapic: Prevent inconsistent state when moving an interrupt
|
|
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
|
|
The generic implementation of refcount_t should be good enough for
everybody, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely,
leaving the generic implementation enabled unconditionally.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191121115902.2551-9-will@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
the CPU_ENTRY_AREA_PAGES assert precise
When two recent commits that increased the size of the 'struct cpu_entry_area'
were merged in -tip, the 32-bit defconfig build started failing on the following
build time assert:
./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_189’ declared with attribute error: BUILD_BUG_ON failed: CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE
arch/x86/mm/cpu_entry_area.c:189:2: note: in expansion of macro ‘BUILD_BUG_ON’
In function ‘setup_cpu_entry_area_ptes’,
Which corresponds to the following build time assert:
BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
The purpose of this assert is to sanity check the fixed-value definition of
CPU_ENTRY_AREA_PAGES arch/x86/include/asm/pgtable_32_types.h:
#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 41)
The '41' is supposed to match sizeof(struct cpu_entry_area)/PAGE_SIZE, which value
we didn't want to define in such a low level header, because it would cause
dependency hell.
Every time the size of cpu_entry_area is changed, we have to adjust CPU_ENTRY_AREA_PAGES
accordingly - and this assert is checking that constraint.
But the assert is both imprecise and buggy, primarily because it doesn't
include the single readonly IDT page that is mapped at CPU_ENTRY_AREA_BASE
(which begins at a PMD boundary).
This bug was hidden by the fact that by accident CPU_ENTRY_AREA_PAGES is defined
too large upstream (v5.4-rc8):
#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 40)
While 'struct cpu_entry_area' is 155648 bytes, or 38 pages. So we had two extra
pages, which hid the bug.
The following commit (not yet upstream) increased the size to 40 pages:
x86/iopl: ("Restrict iopl() permission scope")
... but increased CPU_ENTRY_AREA_PAGES only 41 - i.e. shortening the gap
to just 1 extra page.
Then another not-yet-upstream commit changed the size again:
880a98c33996: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")
Which increased the cpu_entry_area size from 38 to 39 pages, but
didn't change CPU_ENTRY_AREA_PAGES (kept it at 40). This worked
fine, because we still had a page left from the accidental 'reserve'.
But when these two commits were merged into the same tree, the
combined size of cpu_entry_area grew from 38 to 40 pages, while
CPU_ENTRY_AREA_PAGES finally caught up to 40 as well.
Which is fine in terms of functionality, but the assert broke:
BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
because CPU_ENTRY_AREA_MAP_SIZE is the total size of the area,
which is 1 page larger due to the IDT page.
To fix all this, change the assert to two precise asserts:
BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
This takes the IDT page into account, and also connects the size-based
define of CPU_ENTRY_AREA_TOTAL_SIZE with the address-subtraction based
define of CPU_ENTRY_AREA_MAP_SIZE.
Also clean up some of the names which made it rather confusing:
- 'CPU_ENTRY_AREA_TOT_SIZE' wasn't actually the 'total' size of
the cpu-entry-area, but the per-cpu array size, so rename this
to CPU_ENTRY_AREA_ARRAY_SIZE.
- Introduce CPU_ENTRY_AREA_TOTAL_SIZE that _is_ the total mapping
size, with the IDT included.
- Add comments where '+1' denotes the IDT mapping - it wasn't
obvious and took me about 3 hours to decode...
Finally, because this particular commit is actually applied after
this patch:
880a98c33996: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")
Fix the CPU_ENTRY_AREA_PAGES value from 40 pages to the correct 39 pages.
All future commits that change cpu_entry_area will have to adjust
this value precisely.
As a side note, we should probably attempt to remove CPU_ENTRY_AREA_PAGES
and derive its value directly from the structure, without causing
header hell - but that is an adventure for another day! :-)
Fixes: 880a98c33996: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Considering the previous changes, this is a more proper name.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20191121011601.20611-5-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Drop the rbt_memtype_*() call rbt_ prefix, as we no longer use
an rbtree directly.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20191121011601.20611-4-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Get rid of the passing the rb_root down the helper calls; there
is only one: &memtype_rbroot.
No change in functionality.
[ mingo: Fixed the changelog which described a different version of the patch. ]
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20191121011601.20611-3-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With some considerations, the custom pat_rbtree implementation can be
simplified to use most of the generic interval_tree machinery:
- The tree inorder traversal can slightly differ when there are key
('start') collisions in the tree due to one going left and another right.
This, however, only affects the output of debugfs' pat_memtype_list file.
- Generic interval trees are now fully closed [a, b], for which we need
to adjust the last endpoint (ie: end - 1).
- Erasing logic must remain untouched as well.
- In order for the types to remain u64, the 'memtype_interval' calls are
introduced, as opposed to simply using struct interval_tree.
In addition, the PAT tree might potentially also benefit by the fast overlap
detection for the insertion case when looking up the first overlapping node
in the tree.
No change in behavior is intended.
Finally, I've tested this on various servers, via sanity warnings, running
side by side with the current version and so far see no differences in the
returned pointer node when doing memtype_rb_lowest_match() lookups.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20191121011601.20611-2-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
BIOSen -> BIOSes; paing -> paging. Append to 640 its proper unit "Kb".
encomapssing -> encompassing.
[ bp: Merge into a single patch, fix one more typo, massage. ]
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191118070012.27850-1-caoj.fnst@cn.fujitsu.com
|
|
This patch enables KCSAN for x86, with updates to build rules to not use
KCSAN for several incompatible compilation units.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The BUILD_BUG_ON(IO_BITMAP_OFFSET - 1 == 0x67) in the VMX code is bogus in
two aspects:
1) This wants to be in generic x86 code simply to catch issues even when
VMX is disabled in Kconfig.
2) The IO_BITMAP_OFFSET is not the right thing to check because it makes
asssumptions about the layout of tss_struct. Nothing requires that the
I/O bitmap is placed right after x86_tss, which is the hardware mandated
tss structure. It pointlessly makes restrictions on the struct
tss_struct layout.
The proper thing to check is:
- Offset of x86_tss in tss_struct is 0
- Size of x86_tss == 0x68
Move it to the other build time TSS checks and make it do the right thing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
|
|
The setup_data is a bit awkward to use for extremely large data objects,
both because the setup_data header has to be adjacent to the data object
and because it has a 32-bit length field. However, it is important that
intermediate stages of the boot process have a way to identify which
chunks of memory are occupied by kernel data. Thus introduce an uniform
way to specify such indirect data as setup_indirect struct and
SETUP_INDIRECT type.
And finally bump setup_header version in arch/x86/boot/header.S.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: ard.biesheuvel@linaro.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: dave.hansen@linux.intel.com
Cc: eric.snowberg@oracle.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: kanth.ghatraju@oracle.com
Cc: linux-doc@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rdunlap@infradead.org
Cc: ross.philipson@oracle.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191112134640.16035-4-daniel.kiper@oracle.com
|
