| Age | Commit message (Collapse) | Author |
|---|
|
Due to ITS, indirect branches in the lower half of a cacheline may be
vulnerable to branch target injection attack.
Introduce ITS-safe thunks to patch indirect branches in the lower half of
cacheline with the thunk. Also thunk any eBPF generated indirect branches
in emit_indirect_jump().
Below category of indirect branches are not mitigated:
- Indirect branches in the .init section are not mitigated because they are
discarded after boot.
- Indirect branches that are explicitly marked retpoline-safe.
Note that retpoline also mitigates the indirect branches against ITS. This
is because the retpoline sequence fills an RSB entry before RET, and it
does not suffer from RSB-underflow part of the ITS.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the
first half of a cache line get predicted to a target of a branch located in
the second half of the cache line.
Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
tl;dr: There is a window in the mm switching code where the new CR3 is
set and the CPU should be getting TLB flushes for the new mm. But
should_flush_tlb() has a bug and suppresses the flush. Fix it by
widening the window where should_flush_tlb() sends an IPI.
Long Version:
=== History ===
There were a few things leading up to this.
First, updating mm_cpumask() was observed to be too expensive, so it was
made lazier. But being lazy caused too many unnecessary IPIs to CPUs
due to the now-lazy mm_cpumask(). So code was added to cull
mm_cpumask() periodically[2]. But that culling was a bit too aggressive
and skipped sending TLB flushes to CPUs that need them. So here we are
again.
=== Problem ===
The too-aggressive code in should_flush_tlb() strikes in this window:
// Turn on IPIs for this CPU/mm combination, but only
// if should_flush_tlb() agrees:
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
load_new_mm_cr3(need_flush);
// ^ After 'need_flush' is set to false, IPIs *MUST*
// be sent to this CPU and not be ignored.
this_cpu_write(cpu_tlbstate.loaded_mm, next);
// ^ Not until this point does should_flush_tlb()
// become true!
should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3()
and writing to 'loaded_mm', which is a window where they should not be
suppressed. Whoops.
=== Solution ===
Thankfully, the fuzzy "just about to write CR3" window is already marked
with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in
should_flush_tlb() is sufficient to ensure that the CPU is targeted with
an IPI.
This will cause more TLB flush IPIs. But the window is relatively small
and I do not expect this to cause any kind of measurable performance
impact.
Update the comment where LOADED_MM_SWITCHING is written since it grew
yet another user.
Peter Z also raised a concern that should_flush_tlb() might not observe
'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off()
writes them. Add a barrier to ensure that they are observed in the
order they are written.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ [1]
Fixes: 6db2526c1d69 ("x86/mm/tlb: Only trim the mm_cpumask once a second") [2]
Reported-by: Stephen Dolan <sdolan@janestreet.com>
Cc: stable@vger.kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Return `-EBUSY` from tdx_mcall_get_report0() when `TDG.MR.REPORT` returns
`TDCALL_OPERAND_BUSY`. This enables the caller to retry obtaining a
TDREPORT later if another VCPU is extending an RTMR concurrently.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-4-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The TDX guest exposes one MRTD (Build-time Measurement Register) and four
RTMR (Run-time Measurement Register) registers to record the build and boot
measurements of a virtual machine (VM). These registers are similar to PCR
(Platform Configuration Register) registers in the TPM (Trusted Platform
Module) space. This measurement data is used to implement security features
like attestation and trusted boot.
To facilitate updating the RTMR registers, the TDX module provides support
for the `TDG.MR.RTMR.EXTEND` TDCALL which can be used to securely extend
the RTMR registers.
Add helper function to update RTMR registers. It will be used by the TDX
guest driver in enabling RTMR extension support.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-3-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Set the magic BP_SPEC_REDUCE bit to mitigate SRSO when running VMs if and
only if KVM has at least one active VM. Leaving the bit set at all times
unfortunately degrades performance by a wee bit more than expected.
Use a dedicated spinlock and counter instead of hooking virtualization
enablement, as changing the behavior of kvm.enable_virt_at_load based on
SRSO_BP_SPEC_REDUCE is painful, and has its own drawbacks, e.g. could
result in performance issues for flows that are sensitive to VM creation
latency.
Defer setting BP_SPEC_REDUCE until VMRUN is imminent to avoid impacting
performance on CPUs that aren't running VMs, e.g. if a setup is using
housekeeping CPUs. Setting BP_SPEC_REDUCE in task context, i.e. without
blasting IPIs to all CPUs, also helps avoid serializing 1<=>N transitions
without incurring a gross amount of complexity (see the Link for details
on how ugly coordinating via IPIs gets).
Link: https://lore.kernel.org/all/aBOnzNCngyS_pQIW@google.com
Fixes: 8442df2b49ed ("x86/bugs: KVM: Add support for SRSO_MSR_FIX")
Reported-by: Michael Larabel <Michael@michaellarabel.com>
Closes: https://www.phoronix.com/review/linux-615-amd-regression
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250505180300.973137-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
64-bit allyesconfig builds fail with
x86_64-linux-ld: kernel image bigger than KERNEL_IMAGE_SIZE
Bisect points to commit 6f110a5e4f99 ("Disable SLUB_TINY for build
testing") as the responsible commit. Reverting that patch does indeed fix
the problem. Further analysis shows that disabling SLUB_TINY enables
KASAN, and that KASAN is responsible for the image size increase.
Solve the build problem by disabling the image size check for test
builds.
[akpm@linux-foundation.org: add comment, fix nearby typo (sink->sync)]
[akpm@linux-foundation.org: fix comment snafu
Link: https://lore.kernel.org/oe-kbuild-all/202504191813.4r9H6Glt-lkp@intel.com/
Link: https://lkml.kernel.org/r/20250417010950.2203847-1-linux@roeck-us.net
Fixes: 6f110a5e4f99 ("Disable SLUB_TINY for build testing")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
report_ubsan_failure() doesn't use argument regs, and soon it will
be called from the hypervisor context were regs are not available.
So, remove the unused argument.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250430162713.1997569-3-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Calling core::fmt::write() from rust code while FineIBT is enabled
results in a kernel panic:
[ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132!
[ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599
[ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE
[ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0
...
[ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20
[ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7
[ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246
[ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000
[ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88
[ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070
[ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8
[ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000
[ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10
[ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250
This happens because core::fmt::write() calls
core::fmt::rt::Argument::fmt(), which currently has CFI disabled:
library/core/src/fmt/rt.rs:
171 // FIXME: Transmuting formatter in new and indirectly branching to/calling
172 // it here is an explicit CFI violation.
173 #[allow(inline_no_sanitize)]
174 #[no_sanitize(cfi, kcfi)]
175 #[inline]
176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result {
This causes a Control Protection exception, because FineIBT has sealed
off the original function's endbr64.
This makes rust currently incompatible with FineIBT. Add a Kconfig
dependency that prevents FineIBT from getting turned on by default
if rust is enabled.
[ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1],
and thus we relaxed the condition with Rust >= 1.88.
When `objtool` lands checking for this with e.g. [2], the plan is
to ideally run that in upstream Rust's CI to prevent regressions
early [3], since we do not control `core`'s source code.
Alice tested the Rust PR backported to an older compiler.
Peter would like that Rust provides a stable `core` which can be
pulled into the kernel: "Relying on that much out of tree code is
'unfortunate'".
- Miguel ]
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://github.com/rust-lang/rust/pull/139632 [1]
Link: https://lore.kernel.org/rust-for-linux/20250410154556.GB9003@noisy.programming.kicks-ass.net/ [2]
Link: https://github.com/rust-lang/rust/pull/139632#issuecomment-2801950873 [3]
Link: https://lore.kernel.org/r/20250410115420.366349-1-panikiel@google.com
Link: https://lore.kernel.org/r/att0-CANiq72kjDM0cKALVy4POEzhfdT4nO7tqz0Pm7xM+3=_0+L1t=A@mail.gmail.com
[ Reduced splat. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Conflicts:
drivers/cpufreq/intel_pstate.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With the possibility of intra-mode BHI via cBPF, complete mitigation for
BHI is to use IBHF (history fence) instruction with BHI_DIS_S set. Since
this new instruction is only available in 64-bit mode, setting BHI_DIS_S in
32-bit mode is only a partial mitigation.
Do not set BHI_DIS_S in 32-bit mode so as to avoid reporting misleading
mitigated status. With this change IBHF won't be used in 32-bit mode, also
remove the CONFIG_X86_64 check from emit_spectre_bhb_barrier().
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs can be run by unprivileged users, allowing
unprivileged code to execute inside the kernel. Attackers can use this to
craft branch history in kernel mode that can influence the target of
indirect branches.
BHI_DIS_S provides user-kernel isolation of branch history, but cBPF can be
used to bypass this protection by crafting branch history in kernel mode.
To stop intra-mode attacks via cBPF programs, Intel created a new
instruction Indirect Branch History Fence (IBHF). IBHF prevents the
predicted targets of subsequent indirect branches from being influenced by
branch history prior to the IBHF. IBHF is only effective while BHI_DIS_S is
enabled.
Add the IBHF instruction to cBPF jitted code's exit path. Add the new fence
when the hardware mitigation is enabled (i.e., X86_FEATURE_CLEAR_BHB_HW is
set) or after the software sequence (X86_FEATURE_CLEAR_BHB_LOOP) is being
used in a virtual machine. Note that X86_FEATURE_CLEAR_BHB_HW and
X86_FEATURE_CLEAR_BHB_LOOP are mutually exclusive, so the JIT compiler will
only emit the new fence, not the SW sequence, when X86_FEATURE_CLEAR_BHB_HW
is set.
Hardware that enumerates BHI_NO basically has BHI_DIS_S protections always
enabled, regardless of the value of BHI_DIS_S. Since BHI_DIS_S doesn't
protect against intra-mode attacks, enumerate BHI bug on BHI_NO hardware as
well.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs have been identified as potential vectors for
intra-mode Branch Target Injection (BTI) attacks. Classic BPF programs can
be run by unprivileged users. They allow unprivileged code to execute
inside the kernel. Attackers can use unprivileged cBPF to craft branch
history in kernel mode that can influence the target of indirect branches.
Introduce a branch history buffer (BHB) clearing sequence during the JIT
compilation of classic BPF programs. The clearing sequence is the same as
is used in previous mitigations to protect syscalls. Since eBPF programs
already have their own mitigations in place, only insert the call on
classic programs that aren't run by privileged users.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
In commit 2e044911be75 ("x86/traps: Decode 0xEA instructions as #UD")
FineIBT starts using 0xEA as an invalid instruction like UD2. But
insn decoder always returns the length of "0xea" instruction as 7
because it does not check the (i64) superscript.
The x86 instruction decoder should also decode 0xEA on x86-64 as
a one-byte invalid instruction by decoding the "(i64)" superscript tag.
This stops decoding instruction which has (i64) but does not have (o64)
superscript in 64-bit mode at opcode and skips other fields.
With this change, insn_decoder_test says 0xea is 1 byte length if
x86-64 (-y option means 64-bit):
$ printf "0:\tea\t\n" | insn_decoder_test -y -v
insn_decoder_test: success: Decoded and checked 1 instructions
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/174580490000.388420.5225447607417115496.stgit@devnote2
|
|
Commit:
159039af8c07 ("x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map")
added (!REX2) superscript with a space, but the correct format requires ','
for concatination with other superscript tags.
Add ',' to generate correct insn attribute tables.
I confirmed with following command:
arch/x86/lib/x86-opcode-map.txt | grep e8 | head -n 1
[0xe8] = INAT_MAKE_IMM(INAT_IMM_VWORD32) | INAT_FORCE64 | INAT_NO_REX2,
Fixes: 159039af8c07 ("x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/174580489027.388420.15539375184727726142.stgit@devnote2
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove @perm from the guest pseudo FPU container. The field is
initialized during allocation and never used later.
Rename fpu_init_guest_permissions() to show that its sole purpose is to
lock down guest permissions.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mitchell Levy <levymitchell0@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/kvm/af972fe5981b9e7101b64de43c7be0a8cc165323.camel@redhat.com/
Link: https://lore.kernel.org/r/20250506093740.2864458-3-chao.gao@intel.com
|
|
When granting userspace or a KVM guest access to an xfeature, preserve the
entity's existing supervisor and software-defined permissions as tracked
by __state_perm, i.e. use __state_perm to track *all* permissions even
though all supported supervisor xfeatures are granted to all FPUs and
FPU_GUEST_PERM_LOCKED disallows changing permissions.
Effectively clobbering supervisor permissions results in inconsistent
behavior, as xstate_get_group_perm() will report supervisor features for
process that do NOT request access to dynamic user xfeatures, whereas any
and all supervisor features will be absent from the set of permissions for
any process that is granted access to one or more dynamic xfeatures (which
right now means AMX).
The inconsistency isn't problematic because fpu_xstate_prctl() already
strips out everything except user xfeatures:
case ARCH_GET_XCOMP_PERM:
/*
* Lockless snapshot as it can also change right after the
* dropping the lock.
*/
permitted = xstate_get_host_group_perm();
permitted &= XFEATURE_MASK_USER_SUPPORTED;
return put_user(permitted, uptr);
case ARCH_GET_XCOMP_GUEST_PERM:
permitted = xstate_get_guest_group_perm();
permitted &= XFEATURE_MASK_USER_SUPPORTED;
return put_user(permitted, uptr);
and similarly KVM doesn't apply the __state_perm to supervisor states
(kvm_get_filtered_xcr0() incorporates xstate_get_guest_group_perm()):
case 0xd: {
u64 permitted_xcr0 = kvm_get_filtered_xcr0();
u64 permitted_xss = kvm_caps.supported_xss;
But if KVM in particular were to ever change, dropping supervisor
permissions would result in subtle bugs in KVM's reporting of supported
CPUID settings. And the above behavior also means that having supervisor
xfeatures in __state_perm is correctly handled by all users.
Dropping supervisor permissions also creates another landmine for KVM. If
more dynamic user xfeatures are ever added, requesting access to multiple
xfeatures in separate ARCH_REQ_XCOMP_GUEST_PERM calls will result in the
second invocation of __xstate_request_perm() computing the wrong ksize, as
as the mask passed to xstate_calculate_size() would not contain *any*
supervisor features.
Commit 781c64bfcb73 ("x86/fpu/xstate: Handle supervisor states in XSTATE
permissions") fudged around the size issue for userspace FPUs, but for
reasons unknown skipped guest FPUs. Lack of a fix for KVM "works" only
because KVM doesn't yet support virtualizing features that have supervisor
xfeatures, i.e. as of today, KVM guest FPUs will never need the relevant
xfeatures.
Simply extending the hack-a-fix for guests would temporarily solve the
ksize issue, but wouldn't address the inconsistency issue and would leave
another lurking pitfall for KVM. KVM support for virtualizing CET will
likely add CET_KERNEL as a guest-only xfeature, i.e. CET_KERNEL will not
be set in xfeatures_mask_supervisor() and would again be dropped when
granting access to dynamic xfeatures.
Note, the existing clobbering behavior is rather subtle. The @permitted
parameter to __xstate_request_perm() comes from:
permitted = xstate_get_group_perm(guest);
which is either fpu->guest_perm.__state_perm or fpu->perm.__state_perm,
where __state_perm is initialized to:
fpu->perm.__state_perm = fpu_kernel_cfg.default_features;
and copied to the guest side of things:
/* Same defaults for guests */
fpu->guest_perm = fpu->perm;
fpu_kernel_cfg.default_features contains everything except the dynamic
xfeatures, i.e. everything except XFEATURE_MASK_XTILE_DATA:
fpu_kernel_cfg.default_features = fpu_kernel_cfg.max_features;
fpu_kernel_cfg.default_features &= ~XFEATURE_MASK_USER_DYNAMIC;
When __xstate_request_perm() restricts the local "mask" variable to
compute the user state size:
mask &= XFEATURE_MASK_USER_SUPPORTED;
usize = xstate_calculate_size(mask, false);
it subtly overwrites the target __state_perm with "mask" containing only
user xfeatures:
perm = guest ? &fpu->guest_perm : &fpu->perm;
/* Pairs with the READ_ONCE() in xstate_get_group_perm() */
WRITE_ONCE(perm->__state_perm, mask);
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Allen <john.allen@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mitchell Levy <levymitchell0@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Vignesh Balasubramanian <vigbalas@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xin Li <xin3.li@intel.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/all/ZTqgzZl-reO1m01I@google.com
Link: https://lore.kernel.org/r/20250506093740.2864458-2-chao.gao@intel.com
|
|
Multiple testers reported the following new warning:
WARNING: CPU: 0 PID: 0 at arch/x86/mm/tlb.c:795
Which corresponds to:
if (IS_ENABLED(CONFIG_DEBUG_VM) && WARN_ON_ONCE(prev != &init_mm &&
!cpumask_test_cpu(cpu, mm_cpumask(next))))
cpumask_set_cpu(cpu, mm_cpumask(next));
So the problem is that unuse_temporary_mm() explicitly clears
that bit; and it has to, because otherwise the flush_tlb_mm_range() in
__text_poke() will try sending IPIs, which are not at all needed.
See also:
https://lore.kernel.org/all/20241113095550.GBZzR3pg-RhJKPDazS@fat_crate.local/
Notably, the whole {,un}use_temporary_mm() thing requires preemption to
be disabled across it with the express purpose of keeping all TLB
nonsense CPU local, such that invalidations can also stay local etc.
However, as a side-effect, we violate this above WARN(), which sorta
makes sense for the normal case, but very much doesn't make sense here.
Change unuse_temporary_mm() to mark the mm_struct such that a further
exception (beyond init_mm) can be grafted, to keep the warning for all
the other cases.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250430081154.GH4439@noisy.programming.kicks-ass.net
|
|
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135af0 ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX")
Fixes: 3da99c977637 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de
|
|
Conflicts:
tools/arch/x86/include/asm/cpufeatures.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove some unfortunately-named unused macros which could potentially
result in weird build failures. Fortunately, they are under an #ifdef
__ASSEMBLER__ which has kept them from causing problems so far.
[ dhansen: subject and changelog tweaks ]
Fixes: 1a6ade825079 ("x86/alternative: Convert the asm ALTERNATIVE_3() macro")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250505131646.29288-1-jgross%40suse.com
|
|
The following register contains bits that indicate the cause for the
previous reset.
PMx000000C0 (FCH::PM::S5_RESET_STATUS)
This is useful for debug. The reasons for reset are broken into 6 high level
categories. Decode it by category and print during boot.
Specifics within a category are split off into debugging documentation.
The register is accessed indirectly through a "PM" port in the FCH. Use
MMIO access in order to avoid restrictions with legacy port access.
Use a late_initcall() to ensure that MMIO has been set up before trying to
access the register.
This register was introduced with AMD Family 17h, so avoid access on older
families. There is no CPUID feature bit for this register.
[ bp: Simplify the reason dumping loop.
- merge a fix to not access an array element after the last one:
https://lore.kernel.org/r/20250505133609.83933-1-superm1@kernel.org
Reported-by: James Dutton <james.dutton@gmail.com>
]
[ mingo:
- Use consistent .rst formatting
- Fix 'Sleep' class field to 'ACPI-State'
- Standardize pin messages around the 'tripped' verbiage
- Remove reference to ring-buffer printing & simplify the wording
- Use curly braces for multi-line conditional statements ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250422234830.2840784-6-superm1@kernel.org
|
|
CONFIG_HARDENED_USERCOPY=y crash
Borislav Petkov reported the following boot crash on x86-32,
with CONFIG_HARDENED_USERCOPY=y:
| usercopy: Kernel memory overwrite attempt detected to SLUB object 'task_struct' (offset 2112, size 160)!
| ...
| kernel BUG at mm/usercopy.c:102!
So the useroffset and usersize arguments are what control the allowed
window of copying in/out of the "task_struct" kmem cache:
/* create a slab on which task_structs can be allocated */
task_struct_whitelist(&useroffset, &usersize);
task_struct_cachep = kmem_cache_create_usercopy("task_struct",
arch_task_struct_size, align,
SLAB_PANIC|SLAB_ACCOUNT,
useroffset, usersize, NULL);
task_struct_whitelist() positions this window based on the location of
the thread_struct within task_struct, and gets the arch-specific details
via arch_thread_struct_whitelist(offset, size):
static void __init task_struct_whitelist(unsigned long *offset, unsigned long *size)
{
/* Fetch thread_struct whitelist for the architecture. */
arch_thread_struct_whitelist(offset, size);
/*
* Handle zero-sized whitelist or empty thread_struct, otherwise
* adjust offset to position of thread_struct in task_struct.
*/
if (unlikely(*size == 0))
*offset = 0;
else
*offset += offsetof(struct task_struct, thread);
}
Commit cb7ca40a3882 ("x86/fpu: Make task_struct::thread constant size")
removed the logic for the window, leaving:
static inline void
arch_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = 0;
*size = 0;
}
So now there is no window that usercopy hardening will allow to be copied
in/out of task_struct.
But as reported above, there *is* a copy in copy_uabi_to_xstate(). (It
seems there are several, actually.)
int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
const void __user *ubuf)
{
return copy_uabi_to_xstate(x86_task_fpu(tsk)->fpstate, NULL, ubuf, &tsk->thread.pkru);
}
This appears to be writing into x86_task_fpu(tsk)->fpstate. With or
without CONFIG_X86_DEBUG_FPU, this resolves to:
((struct fpu *)((void *)(task) + sizeof(*(task))))
i.e. the memory "after task_struct" is cast to "struct fpu", and the
uses the "fpstate" pointer. How that pointer gets set looks to be
variable, but I think the one we care about here is:
fpu->fpstate = &fpu->__fpstate;
And struct fpu::__fpstate says:
struct fpstate __fpstate;
/*
* WARNING: '__fpstate' is dynamically-sized. Do not put
* anything after it here.
*/
So we're still dealing with a dynamically sized thing, even if it's not
within the literal struct task_struct -- it's still in the kmem cache,
though.
Looking at the kmem cache size, it has allocated "arch_task_struct_size"
bytes, which is calculated in fpu__init_task_struct_size():
int task_size = sizeof(struct task_struct);
task_size += sizeof(struct fpu);
/*
* Subtract off the static size of the register state.
* It potentially has a bunch of padding.
*/
task_size -= sizeof(union fpregs_state);
/*
* Add back the dynamically-calculated register state
* size.
*/
task_size += fpu_kernel_cfg.default_size;
/*
* We dynamically size 'struct fpu', so we require that
* 'state' be at the end of 'it:
*/
CHECK_MEMBER_AT_END_OF(struct fpu, __fpstate);
arch_task_struct_size = task_size;
So, this is still copying out of the kmem cache for task_struct, and the
window seems unchanged (still fpu regs). This is what the window was
before:
void fpu_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = offsetof(struct thread_struct, fpu.__fpstate.regs);
*size = fpu_kernel_cfg.default_size;
}
And the same commit I mentioned above removed it.
I think the misunderstanding is here:
| The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
| now that the FPU structure is not embedded in the task struct anymore, which
| reduces text footprint a bit.
Yes, FPU is no longer in task_struct, but it IS in the kmem cache named
"task_struct", since the fpstate is still being allocated there.
Partially revert the earlier mentioned commit, along with a
recalculation of the fpstate regs location.
Fixes: cb7ca40a3882 ("x86/fpu: Make task_struct::thread constant size")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/20250409211127.3544993-1-mingo@kernel.org/ # Discussion #1
Link: https://lore.kernel.org/r/202505041418.F47130C4C8@keescook # Discussion #2
|
|
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Explicitly include linux/init.h rather than pulling it through
potluck.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit c4741b23059794bd99beef0f700103b0d983b3fd.
Crypto API self-tests no longer run at registration time and now
occur either at late_initcall or upon the first use.
Therefore the premise of the above commit no longer exists. Revert
it and subsequent additions of subsys_initcall and arch_initcall.
Note that lib/crypto calls will stay at subsys_initcall (or rather
downgraded from arch_initcall) because they may need to occur
before Crypto API registration.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
To match sha256_blocks_arch(), change the type of the nblocks parameter
of the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Consolidate the whole logic which determines whether the microcode loader
should be enabled or not into a single function and call it everywhere.
Well, almost everywhere - not in mk_early_pgtbl_32() because there the kernel
is running without paging enabled and checking dis_ucode_ldr et al would
require physical addresses and uglification of the code.
But since this is 32-bit, the easier thing to do is to simply map the initrd
unconditionally especially since that mapping is getting removed later anyway
by zap_early_initrd_mapping() and avoid the uglification.
In doing so, address the issue of old 486er machines without CPUID
support, not booting current kernels.
[ mingo: Fix no previous prototype for ‘microcode_loader_disabled’ [-Wmissing-prototypes] ]
Fixes: 4c585af7180c1 ("x86/boot/32: Temporarily map initrd for microcode loading")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/CANpbe9Wm3z8fy9HbgS8cuhoj0TREYEEkBipDuhgkWFvqX0UoVQ@mail.gmail.com
|
|
Current minimum required version of binutils is 2.25,
which supports PAUSE instruction mnemonic.
Replace "REP; NOP" with this proper mnemonic.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20250418083436.133148-2-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename rep_nop() function to what it really does.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20250418083436.133148-1-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With CONFIG_GENDWARFKSYMS, um builds fail due to missing prototypes
in asm/asm-prototypes.h. Add declarations for cmpxchg8b_emu and the
exported checksum functions, including csum_partial_copy_generic as
it's also exported.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503251216.lE4t9Ikj-lkp@intel.com/
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20250326190500.847236-2-samitolvanen@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Nathan reported [1] that when built with clang, the um kernel
crashes pretty much immediately. This turned out to be an issue
with the inline assembly I had added, when clang used %rax/%eax
for both operands. Reorder it so current->thread.segv_continue
is written first, and then the lifetime of _faulted won't have
overlap with the lifetime of segv_continue.
In the email thread Benjamin also pointed out that current->mm
is only NULL for true kernel tasks, but we could do this for a
userspace task, so the current->thread.segv_continue logic must
be lifted out of the mm==NULL check.
Finally, while looking at this, put a barrier() so the NULL
assignment to thread.segv_continue cannot be reorder before
the possibly faulting operation.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20250402221254.GA384@ax162 [1]
Fixes: d1d7f01f7cd3 ("um: mark rodata read-only and implement _nofault accesses")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that every architecture provides a block function, use that
to implement the lib/poly1305 and remove the old per-arch code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add block-only interface.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046de0
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
|
|
Most of the SEV support code used to reside in a single C source file
that was included in two places: the core kernel, and the decompressor.
The code that is actually shared with the decompressor was moved into a
separate, shared source file under startup/, on the basis that the
decompressor also executes from the early 1:1 mapping of memory.
However, while the elaborate #VC handling and instruction decoding that
it involves is also performed by the decompressor, it does not actually
occur in the core kernel at early boot, and therefore, does not need to
be part of the confined early startup code.
So split off the #VC handling code and move it back into arch/x86/coco
where it came from, into another C source file that is included from
both the decompressor and the core kernel.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-31-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
|
|
The SME encryption startup code populates page tables using the ordinary
set_pXX() helpers, and in a PTI build, these will call out to
__pti_set_user_pgtbl() to manipulate the shadow copy of the page tables
for user space.
This is unneeded for the startup code, which only manipulates the
swapper page tables, and so this call could be avoided in this
particular case. So instead of exposing the ordinary
__pti_set_user_pgtblt() to the startup code after its gets confined into
its own symbol space, provide an alternative which just returns pgd,
which is always correct in the startup context.
Annotate it as __weak for now, this will be dropped in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-40-ardb+git@google.com
|
|
Add aliases for all the data objects that the startup code references -
this is needed so that this code can be moved into its own confined area
where it can only access symbols that have a __pi_ prefix.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-39-ardb+git@google.com
|
|
Startup code that may execute from the early 1:1 mapping of memory will
be confined into its own address space, and only be permitted to access
ordinary kernel symbols if this is known to be safe.
Introduce a macro helper SYM_PIC_ALIAS() that emits a __pi_ prefixed
alias for a symbol, which allows startup code to access it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-38-ardb+git@google.com
|
|
As a first step towards disentangling the SEV #VC handling code -which
is shared between the decompressor and the core kernel- from the SEV
startup code, move the decompressor's copy of the instruction decoder
into a separate source file.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-30-ardb+git@google.com
|
|
sev_snp_enabled() is no longer used outside of the source file that
defines it, so make it static and drop the extern declarations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-29-ardb+git@google.com
|
|
__supported_pte_mask is statically initialized to U64_MAX and never
assigned until long after the startup code executes that creates the
initial page tables. So applying the mask is unnecessary, and can be
avoided.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-27-ardb+git@google.com
|
|
Move early_setup_gdt() out of the startup code that is callable from the
1:1 mapping - this is not needed, and instead, it is better to expose
the helper that does reside in __head directly.
This reduces the amount of code that needs special checks for 1:1
execution suitability. In particular, it avoids dealing with the GHCB
page (and its physical address) in startup code, which runs from the
1:1 mapping, making physical to virtual translations ambiguous.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-26-ardb+git@google.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
caller
If CONFIG_X86_DEBUG_FPU=Y, arch_exit_to_user_mode_prepare() calls
arch_exit_work() even if ti_work == 0. There only reason is that we
want to call fpregs_assert_state_consistent() if TIF_NEED_FPU_LOAD
is not set.
This looks confusing. arch_exit_to_user_mode_prepare() can just call
fpregs_assert_state_consistent() unconditionally, it depends on
CONFIG_X86_DEBUG_FPU and checks TIF_NEED_FPU_LOAD itself.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S . Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250503143902.GA9012@redhat.com
|
