summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-07-24MIPS: Netlogic: XLP PCIe controller support.Ganesan Ramalingam
Adds support for the XLP on-chip PCIe controller. On XLP, the on-chip devices(including the 4 PCIe links) appear in the PCIe configuration space of the XLP as PCI devices. The changes are to initialize and register the PCIe controller, enable hardware byte swap in the PCIe IO and MEM space, and to enable PCIe interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3760/ Patchwork: https://patchwork.linux-mips.org/patch/4104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLR/XLS I2CJayachandran C
Add platform code for XLR/XLS I2C controller and devices. Add devices on the I2C bus on the XLR/XLS developement boards. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3757/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform NAND/NOR flash supportGanesan Ramalingam
Changes to add support for the boot NOR flash on XLR boards and the boot NAND/NOR flash drivers on the XLS boards. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLS USBJayachandran C
Add USB initialization code, setup resources and add USB platform driver in mips/netlogic/xlr/platform.c. Add USB support for XLR/XLS platform in Kconfig. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Remove NETLOGIC_ prefixJayachandran C
Remove NETLOGIC_ prefix from gpio register definitions, this will bring it in-line with the other Netlogic headers. Having NETLOGIC prefix here is misleading because these are XLR/XLS specific register definitions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: SMP wakeup code updateJayachandran C
Update for core intialization code. Initialize status register after receiving NMI for CPU wakeup. Add the low level L1D flush code before enabling threads in core. Also convert the ehb to _ehb so that it works under more GCC versions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3755/ Patchwork: https://patchwork.linux-mips.org/patch/4095/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Update comments in smpboot.SJayachandran C
No change in logic, comments update and whitespace cleanup. * A few comments in the file were in assembler style and the rest int C style, convert all of them to C style. * Mark workarounds for Ax silicon with a macro XLP_AX_WORKAROUND * Whitespace fixes - use tabs consistently * rename __config_lsu macro to xlp_config_lsu Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add 96328avng reference boardJonas Gorski
This allows booting to command line. Ethernet is not supported yet, but PCIe connected wireless should work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3958/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Expose PCIe drivers for MIPSJonas Gorski
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3957/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add PCIe Support for BCM6328Jonas Gorski
Add support for the PCIe port found on BCM6328. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3956/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Move the PCI initialization into its own functionJonas Gorski
Also make the cpu check a bit more explicit. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3953/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add basic BCM6328 supportJonas Gorski
This includes CPU speed, memory size detection and working UART, but lacking the appropriate drivers, no support for attached flash. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3951/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Use the Chip ID register for identifying the SoCJonas Gorski
Newer BCM63XX SoCs use virtually the same CPU ID, differing only in the revision bits. But since they all have the Chip ID register at the same location, we can use that to identify the SoC we are running on. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3955/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add flash type detectionJonas Gorski
On BCM6358 and BCM6368 the attached flash type is exposed through a bootstrapping register. Use it for auto detecting the flash type on those and default to parallel flash for earlier SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3954/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Move flash registration out of board_bcm963xx.cJonas Gorski
board_bcm963xx.c is already large enough. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3952/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add RNG driver platform_device stubFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3325/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add RNG peripheral definitionsFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3326/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add support for "ipsec" clockFlorian Fainelli
This module is only available on BCM6368 so far and does not require resetting the block. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: OCTEON: Remove some unused files.David Daney
These FPA related files are not used anywhere in the kernel. Remove them. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Fix platform_devices idFlorian Fainelli
There is only one watchdog and VoIP DSP platform devices per board, use -1 as the platform_device id accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24sched/x86: Remove broken power estimationPeter Zijlstra
The x86 sched power implementation has been broken forever and gets in the way of other stuff, remove it. [ For archaeological interest, fixing this code would require dealing with the cross-cpu calling of these functions and more importantly, we need to filter idle time out of the a/m-perf stuff because the ratio will go down to 0 when idle, giving a 0 capacity which is not what we'd want. ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Link: http://lkml.kernel.org/r/1339594110.8980.38.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-24tile: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24um: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24avr32: remove km_type definitionsCong Wang
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24frv: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24powerpc: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24arm: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24bf60x: fix build warningBob Liu
Fix several build warning while using bf609-ezkit_defconfig. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24PM: add BF60x flash suspend and resume supportSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24blackfin: twi: read twi mmr via bfin_read macroSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24dpm: deepsleep: reserve stackSteven Miao
Reserve 12 bytes on the stack for deepsleep use. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: cpufreq: fix anomaly 05000273Sonic Zhang
Anomaly 05000273 doesn't apply to bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf609: add adv7511 display supportScott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkitBob Liu
In user xip test, there is a cplb error when ROMKERNEL try to mount romfs using 'mount -t romfs /dev/mtdblock2 /mnt', becasue the CPLB setting is not correct. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: Add double fault, hardware error and NMI SEC handlerSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: update anomaly id in serial and twi driver headers.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: vs6624 pin updateVivi Li
Change ce pin to PE4 according to new adaptor board and re-define ppi for vs6624 to avoid gpio conflict. Signed-off-by: Vivi Li <vivi.li@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: add default anomaly setting.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: update bf60x anomaly list.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: sec: Enable sec interrupt source priority configuration.Sonic Zhang
Customize the SEC interrupt priority array in machine ints-priority.c. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: sec: Clean up interrupt initialization code for SEC.Sonic Zhang
Turn SEC related macro CONFIG_BF60x into SEC_GCTL. Move machine specific GPIO_PINT macros to machine gpio header. Split SEC init_arch_irq() and vec_to_irq() from old SIC. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driverScott Jiang
It's the same for both bf5xx and bf6xx soc. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf561: add capabilities in adv7183_inputsScott Jiang
Add capabilities in adv7183_inputs to indicate that S_STD is supported. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf609: convert vs6624 blank_clocks to black_pixelsScott Jiang
PPI driver has changed blank units from clocks to pixels. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24blackfin: fix musb macro nameBob Liu
Musb can't work since the marco name has been changed. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24cleanup: sec and linkport only built on bf60xSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bfin: pint: add pint suspend and resumeSteven Miao
Add pint suspend and resume if defined BFIN_GPIO_PINT. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: pm: add pint suspend and resume supportSteven Miao
save and restore pint sec CTL save and restore pint registers add pint suspend and resume when suspend to mem Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf609: add HDMI support for adv7842Scott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf609: add CVBS and S-Video support for adv7842Scott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
generated by cgit (git 2.34.1) at 2025-07-19 15:34:52 +0000