| Age | Commit message (Collapse) | Author |
|---|
|
Use strscpy() to safely copy the command-line string instead of memcpy()
followed by a manual NUL-termination.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
Swapped out strncpy() for strscpy() in parse_uboot_commandline() while
copying to commandp. strscpy() makes sure the string is properly null-
terminated and gives a more useful return value so it's just a safer
choice overall.
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Mohammad Mahdi Anbaraki <m.mahdianbaraki@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
CV18XX
replace newly added precise compatible with old one for existed
clock device of CV18XX series SoCs.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250504104553.1447819-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Sophgo SG2044 SRD3-10 board bases on Sophgo SG2044 SoC.
This board includes 5 uart ports, 5 pcie x8 slots, 1 1G Ethernet port,
1 microSD slot.
Add initial device tree of this board with uart support.
Link: https://lore.kernel.org/r/20250413223507.46480-11-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Since riscv and arm architecture use different interrupt definitions,
use a macro SOC_PERIPHERAL_IRQ mask this difference.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As the cv18xx.dtsi serves as a common peripheral header for all
riscv cv180x/cv181x/sg200x SoCs, it not cover the entire cv18xx
series as there is cv182x and cv183x. So rename the header file
to make it precise.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As sg2000 and sg2002 can boot from an arm a53 core, it is not
suitable to left the riscv cpu definition in the common peripheral
header.
Move the riscv related device into a separate header file, so the
arm subsystem can reuse the common peripheral header.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Although the cv1800b/cv1812h/sg2000/sg2002 share most peripherals,
some basic peripherals, like clock, pinctrl, clint and plint, are
not shared. These are caused by not only historical reason (plic,
clint), but also the fact the device is not the same (clock, pinctrl).
It is good to override device compatible when the SoC number is small,
but now it is a burden for maintenance, and it is kind of annoyed to
explain why using override. So it is time to move this out of the
common peripheral header.
Move all soc related peripheral device from common peripheral header
to the soc specific header to get rid of most compatible override.
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add spi controllers for SG2042.
SG2042 uses the upstreamed Synopsys DW SPI IP.
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Link: https://lore.kernel.org/r/20250425-sfg-spi-v6-3-2dbe7bb46013@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add pinctrl node and related pin configuration for SG2042 SoC.
Link: https://lore.kernel.org/r/20250211051801.470800-9-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
There is no need to specify separate HPD gpio for the HDMI block. Use
built-in HPD in order to detect if the monitor is plugged or not.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250209-fd-hdmi-hpd-v4-16-6224568ed87f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding interconnect support for the QCM2290 platform some of them
got the c&p error, rogue MASTER_APPSS_PROC for the config_noc
interconnect. Turn that into SLAVE_QUP_0 as expected.
Fixes: 5b970ff0193d ("arm64: dts: qcom: qcm2290: Hook up interconnects")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250207-rb1-bt-v4-4-d810fc8c94a9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the SLPI remoteproc and declare the firmware path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-5-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SLPI / Sensors DSP present on the SC8280XP platforms / Lenovo
X13s laptop.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-4-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SC8280XP features a SLPI (Sensor Low Power Island) core. Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-3-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Certain /soc@0 subnodes are very out of order. Reshuffle them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250517-topic-8280_slpi-v2-2-1f96f86ac3ae@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix PEBS-via-PT crash"
* tag 'perf-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some bugs in kernel-fpu, cpu idle function, hibernation and
uprobes"
* tag 'loongarch-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: uprobes: Remove redundant code about resume_era
LoongArch: uprobes: Remove user_{en,dis}able_single_step()
LoongArch: Save and restore CSR.CNTC for hibernation
LoongArch: Move __arch_cpu_idle() to .cpuidle.text section
LoongArch: Fix MAX_REG_OFFSET calculation
LoongArch: Prevent cond_resched() occurring within kernel-fpu
|
|
Both regs_get_kernel_stack_nth() and regs_get_register() are not
inlined. With the new ftrace funcgraph-args feature they show up in
function graph tracing:
4) | sched_core_idle_cpu(cpu=4) {
4) 0.257 us | regs_get_register(regs=0x37fe00afa10, offset=2);
4) 0.218 us | regs_get_register(regs=0x37fe00afa10, offset=3);
4) 0.225 us | regs_get_register(regs=0x37fe00afa10, offset=4);
4) 0.239 us | regs_get_register(regs=0x37fe00afa10, offset=5);
4) 0.239 us | regs_get_register(regs=0x37fe00afa10, offset=6);
4) 0.245 us | regs_get_kernel_stack_nth(regs=0x37fe00afa10, n=20);
This is subtoptimal, since both functions are supposed to be ftrace
internal helper functions. If they appear in ftrace traces this reduces
readability significantly, plus this adds tons of extra useless extra
entries.
Address this by moving both functions and required helpers to ptrace.h and
always inline them. This way they don't appear in traces anymore. In
addition the overhead that comes with functions calls is also reduced.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
asm/thread_info.h requires PAGE_SIZE, which is defined in vdso/page.h,
but doesn't need to include asm/lowcore.h or asm/page.h.
Therefore change the includes accordingly and reduce header dependencies.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When calling the diag for DCSS unload on a non-IPL CPU, the sclp maximum
memory detection on the next IPL would falsely return the end of the
previously loaded DCSS.
This is because of an issue in z/VM, so work around it by always calling
the diag for DCSS unload on IPL CPU 0. That CPU cannot be set offline,
so the dcss_diag() call can directly be scheduled to CPU 0.
The wrong maximum memory value returned by sclp would only affect KASAN
kernels. When a DCSS within the falsely reported extra memory range is
loaded and accessed again, it would result in a kernel crash:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 001c0000a3ffe000 TEID: 001c0000a3ffe803
Fault in home space mode while using kernel ASCE.
AS:000000039955400b R2:00000003fe3b400b R3:000000037a2a8007 S:0000000000000020
Oops: 0010 ilc:3 [#1]SMP
[...]
CPU: 2 UID: 0 PID: 1563 Comm: mount Kdump: loaded Not tainted 6.15.0-rc5-11546-g3ea93fb3d026-dirty #7 NONE
Hardware name: IBM 3931 A01 704 (z/VM 7.4.0)
Krnl PSW : 0704c00180000000 000da6f2b338faf2 (kasan_check_range+0x172/0x310)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000040 001c0000a3ffe000 000000051fff0000 0000000000001000
0000000000000000 000da6f233380ff6 00000000000001f8 0000000000000000
001c0000a3ffe200 0000000000000040 001c0000a3ffe200 0000000000000200
000003ff97a2cfa8 0000000000000000 0000000000000010 000da672b58af070
Krnl Code: 000da6f2b338fae2: 41101008 la %r1,8(%r1)
000da6f2b338fae6: eca100268064 cgrj %r10,%r1,8,000da6f2b338fb32
#000da6f2b338faec: ebe00002000c srlg %r14,%r0,2
>000da6f2b338faf2: e3b010000002 ltg %r11,0(%r1)
000da6f2b338faf8: a77400a8 brc 7,000da6f2b338fc48
000da6f2b338fafc: 41b01008 la %r11,8(%r1)
000da6f2b338fb00: b904001b lgr %r1,%r11
000da6f2b338fb04: e3a0b0000002 ltg %r10,0(%r11)
Call Trace:
[<000da6f2b338faf2>] kasan_check_range+0x172/0x310
[<000da6f2b3390b3c>] __asan_memcpy+0x3c/0x90
[<000da6f233380ff6>] dcssblk_submit_bio+0x3a6/0x620 [dcssblk]
[<000da6f2b3eb403c>] __submit_bio+0x25c/0x4a0
[<000da6f2b3eb43bc>] __submit_bio_noacct+0x13c/0x450
[<000da6f2b3eb4bde>] submit_bio_noacct_nocheck+0x50e/0x620
[<000da6f2b34f4978>] mpage_readahead+0x318/0x3f0
[<000da6f2b31edbe6>] read_pages+0x156/0x740
[<000da6f2b31ee594>] page_cache_ra_unbounded+0x3c4/0x610
[<000da6f2b31ef094>] force_page_cache_ra+0x1f4/0x2d0
[<000da6f2b31d092e>] filemap_get_pages+0x2ce/0xaa0
[<000da6f2b31d1428>] filemap_read+0x328/0x9a0
[<000da6f2b3e9b7e8>] blkdev_read_iter+0x228/0x3b0
[<000da6f2b340f7a6>] vfs_read+0x5b6/0x7f0
[<000da6f2b34110be>] ksys_read+0x10e/0x1e0
[<000da6f2b4e7acb2>] __do_syscall+0x122/0x1f0
[<000da6f2b4e93ffe>] system_call+0x6e/0x90
Last Breaking-Event-Address:
[<000da6f2b338faac>] kasan_check_range+0x12c/0x310
Kernel panic - not syncing: Fatal exception: panic_on_oops
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This is a complete rework of the protected key AES (PAES) implementation.
The goal of this rework is to implement the 4 modes (ecb, cbc, ctr, xts)
in a real asynchronous fashion:
- init(), exit() and setkey() are synchronous and don't allocate any
memory.
- the encrypt/decrypt functions first try to do the job in a synchronous
manner. If this fails, for example the protected key got invalid caused
by a guest suspend/resume or guest migration action, the encrypt/decrypt
is transferred to an instance of the crypto engine (see below) for
asynchronous processing.
These postponed requests are then handled by the crypto engine by
invoking the do_one_request() callback but may of course again run into
a still not converted key or the key is getting invalid. If the key is
still not converted, the first thread does the conversion and updates
the key status in the transformation context. The conversion is
invoked via pkey API with a new flag PKEY_XFLAG_NOMEMALLOC.
Note that once there is an active requests enqueued to get async
processed via crypto engine, further requests also need to go via
crypto engine to keep the request sequence.
This patch together with the pkey/zcrypt/AP extensions to support
the new PKEY_XFLAG_NOMEMMALOC should toughen the paes crypto algorithms
to truly meet the requirements for in-kernel skcipher implementations
and the usage patterns for the dm-crypt and dm-integrity layers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20250514090955.72370-3-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Some of the pcc sub-functions have a protected key as
input and thus may run into the situation that this
key may be invalid for example due to live guest migration
to another physical hardware.
Rework the inline assembler function cpacf_pcc() to
return the condition code (cc) as return value:
0 - cc code 0 (normal completion)
1 - cc code 1 (prot key wkvp mismatch or src op out of range)
2 - cc code 2 (something invalid, scalar multiply infinity, ...)
Note that cc 3 (partial completion) is handled within the asm code
and never returned.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250514090955.72370-2-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
PARAVIRT_XXL is exclusively utilized by XEN_PV, which is only compatible
with 64-bit machines.
Clearly designate PARAVIRT_XXL as 64-bit only and remove ifdefs to
support CONFIG_PGTABLE_LEVELS < 5.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-5-kirill.shutemov@linux.intel.com
|
|
Both Intel and AMD CPUs support 5-level paging, which is expected to
become more widely adopted in the future. All major x86 Linux
distributions have the feature enabled.
Remove CONFIG_X86_5LEVEL and related #ifdeffery for it to make it more readable.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-4-kirill.shutemov@linux.intel.com
|
|
5-level paging only supports SPARSEMEM_VMEMMAP. CONFIG_X86_5LEVEL is
being phased out, making 5-level paging support mandatory.
Make CONFIG_SPARSEMEM_VMEMMAP mandatory for x86-64 and eliminate
any associated conditional statements.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-3-kirill.shutemov@linux.intel.com
|
|
Dynamic memory layout is used by KASLR and 5-level paging.
CONFIG_X86_5LEVEL is going to be removed, making 5-level paging support
unconditional which requires unconditional support of dynamic memory
layout.
Remove CONFIG_DYNAMIC_MEMORY_LAYOUT.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-2-kirill.shutemov@linux.intel.com
|
|
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Enable cpufreq on X1E80100 SoCs through the SCMI perf protocol node.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Jens reported that the sanity checks added to the new ps883x USB retimer
driver breaks USB and display on the HP X14. Turns out the X14 only has
a retimer on one of the ports, but this initially went unnoticed due to
the missing sanity check (and error handling) in the retimer driver.
Drop the non-existing retimer from the devicetree to enable the second
USB port and the display subsystem.
Note that this also matches the ACPI tables.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Lenovo ThinkPad T14s, the headset is connected via a HiFi mux to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.
Enable the mux controls required to power this switch along with wiring up
gpio that control the headset switching.
Without this, headset audio will be very noisy and might see headset
detection errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-7-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable PCIe5 and the SDX62 modem present on some T14s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327081427.19693-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use KVM's preferred kvm_x86_call() wrapper to invoke static calls related
to mirror page tables.
No functional change intended.
Fixes: 77ac7079e66d ("KVM: x86/tdp_mmu: Propagate building mirror page tables")
Fixes: 94faba8999b9 ("KVM: x86/tdp_mmu: Propagate tearing down mirror page tables")
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250331182703.725214-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-43-jirislaby@kernel.org
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # for 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-42-jirislaby@kernel.org
|
|
All irq_domain_add_*() functions are going away. PowerPC is the only
user of irq_domain_add_nomap() and there is no irq_domain_create_nomap()
complement.
Therefore, to align with the rest of the kernel, rename
irq_domain_add_nomap() to irq_domain_create_nomap() and accept a
fwnode_handle instead of a device_node.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-40-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-34-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-33-jirislaby@kernel.org
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-29-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-26-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-15-jirislaby@kernel.org
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-14-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-11-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-9-jirislaby@kernel.org
|
|
Virtual machines can exploit bus locks to degrade the performance of
the system. Bus locks can be caused by Non-WB(Write back) and
misaligned locked RMW (Read-modify-Write) instructions and require
systemwide synchronization among all processors which can result into
significant performance penalties.
To address this issue, the Bus Lock Threshold feature is introduced to
provide ability to hypervisor to restrict guests' capability of
initiating mulitple buslocks, thereby preventing system slowdowns.
Support for the buslock threshold is indicated via CPUID function
0x8000000A_EDX[29].
On the processors that support the Bus Lock Threshold feature, the
VMCB provides a Bus Lock Threshold enable bit and an unsigned 16-bit
Bus Lock threshold count.
VMCB intercept bit
VMCB Offset Bits Function
14h 5 Intercept bus lock operations
Bus lock threshold count
VMCB Offset Bits Function
120h 15:0 Bus lock counter
When a VMRUN instruction is executed, the bus lock threshold count is
loaded into an internal count register. Before the processor executes
a bus lock in the guest, it checks the value of this register:
- If the value is greater than '0', the processor successfully
executes the bus lock and decrements the count.
- If the value is '0', the bus lock is not executed, and a #VMEXIT to
the VMM is taken.
The bus lock threshold #VMEXIT is reported to the VMM with the VMEXIT
code A5h, SVM_EXIT_BUS_LOCK.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-4-manali.shukla@amd.com
[sean: rewrite shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Misbehaving guests can cause bus locks to degrade the performance of
the system. The Bus Lock Threshold feature can be used to address this
issue by providing capability to the hypervisor to limit guest's
ability to generate bus lock, thereby preventing system slowdown due
to performance penalities.
When the Bus Lock Threshold feature is enabled, the processor checks
the bus lock threshold count before executing the buslock and decides
whether to trigger bus lock exit or not.
The value of the bus lock threshold count '0' generates bus lock
exits, and if the value is greater than '0', the bus lock is executed
successfully and the bus lock threshold count is decremented.
Presence of the Bus Lock threshold feature is indicated via CPUID
function 0x8000000A_EDX[29].
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250502050346.14274-3-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move and rename kvm_pio_request.linear_rip to
kvm_vcpu_arch.cui_linear_rip so that the field can be used by other
userspace exit completion flows that need to take action if and only
if userspace has not modified RIP.
No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-2-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
