| Age | Commit message (Collapse) | Author |
|---|
|
Allow expanding possible configurations for the same peripheral,
consistent with the scheme adopted in Linux.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
stm32h750i-art-pi.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250424084706.105049-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add device tree node for the low power timer on the STM32F746.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20250404143514.860126-1-ben.wolsieffer@hefring.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Set STM32 ADC1&2 as consumers of BSEC, to retrieve vrefint calibration
data on STM32MP13x SoCs.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-3-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Describe vrefint calibration cell to be retrieved through bsec,
on STM32MP13x SoCs family.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-2-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Because current PWM Kconfig is sorting by symbol name,
it looks strange ordering in menuconfig.
=> [ ] Renesas R-Car PWM support
=> [ ] Renesas TPU PWM support
[ ] Rockchip PWM support
=> [ ] Renesas RZ/G2L General PWM Timer support
=> [ ] Renesas RZ/G2L MTU3a PWM Timer support
Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas,
and sort it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into pwm/for-next
Renesas ARM defconfig updates for v6.16 (take two)
- Enable modular support for the Renesas RZ/G2L GPT and MSIOF sound in
the ARM64 defconfig,
- Enable more support for RZN1D-DB/EB in shmobile_defconfig.
It is merged into the pwm tree due to the next patch renaming
PWM_RZG2L_GPT which has a use added in the arm64 defconfig.
|
|
The global pseudo-constants 'page_offset_base', 'vmalloc_base' and
'vmemmap_base' are not used extremely early during the boot, and cannot be
used safely until after the KASLR memory randomization code in
kernel_randomize_memory() executes, which may update their values.
So there is no point in setting these variables extremely early, and it
can wait until after the kernel itself is mapped and running from its
permanent virtual mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250513111157.717727-9-ardb+git@google.com
|
|
Warnings generated with 'make W=1':
arch/x86/power/hibernate.c:47: warning: Function parameter or struct member 'pfn' not described in 'pfn_is_nosave'
arch/x86/power/hibernate.c:92: warning: Function parameter or struct member 'max_size' not described in 'arch_hibernation_header_save'
Add missing parameter documentation in hibernate functions to
fix kernel-doc warnings.
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250514062637.3287779-2-shivankg@amd.com
|
|
Building the kernel with W=1 generates the following warning:
arch/x86/mm/pat/memtype.c:692: warning: Function parameter or struct member 'pfn' not described in 'pat_pfn_immune_to_uc_mtrr'
Add missing parameter documentation to fix the kernel-doc warning.
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250514062637.3287779-3-shivankg@amd.com
|
|
Recent patch fixed an old commit
'fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")'
which is to include building of ppc_save_reg.c only when XMON
and KEXEC_CORE and PPC_BOOK3S are enabled. This was valid, since
ppc_save_regs was called only in replay_system_reset() of old
irq.c which was under BOOK3S.
But there has been multiple refactoring of irq.c and have
added call to ppc_save_regs() from __replay_soft_interrupts
-> replay_soft_interrupts which is part of irq_64.c included
under CONFIG_PPC64. And since ppc_save_regs is called in
CRASH_DUMP path as part of crash_setup_regs in kexec.h,
CONFIG_PPC32 also needs it.
So with this recent patch which enabled the building of
ppc_save_regs.c caused a build break when none of these
(XMON, KEXEC_CORE, BOOK3S) where enabled as part of config.
Patch to enable building of ppc_save_regs.c by defaults.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250511041111.841158-1-maddy@linux.ibm.com
|
|
Leverage GPIO to support system LED to indicate activity of CPUs.
Link: https://lore.kernel.org/r/20250424-03-k1-gpio-v9-3-eaece8cc5a86@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Populate the GPIO node in the device tree for SpacemiT K1 SoC.
Each of 32 pins will act as one bank and map pins to pinctrl controller.
Link: https://lore.kernel.org/r/20250424-03-k1-gpio-v9-2-eaece8cc5a86@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The K1 SoC features two clocks for UART controller, Acquire them
explicitly in the driver. Also it is required to remove the
clock-frequency properties from the uart node, otherwise the new
clock properties are ignored by of_platform_serial_setup() in "8250_of.c".
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Link: https://lore.kernel.org/r/20250424-05-dts-clock-v2-2-17d83a705c4c@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Pinctrl of K1 SoC need two clocks, so explicitly acquire them.
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Link: https://lore.kernel.org/r/20250424-05-dts-clock-v2-1-17d83a705c4c@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Describe the PLL and system controllers that're capable of generating
clock signals in the devicetree.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250508111528.10508-2-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The name is Mimi Phuong-Thao Vo.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241110162139.5179-2-thorsten.blum@linux.dev
|
|
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a synthetic feature flag for Zen6.
[ bp: Move the feature flag to a free slot and avoid future merge
conflicts from incoming stuff. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
|
|
1f4bb068b498 ("x86/bugs: Restructure SRSO mitigation") does this:
if (boot_cpu_data.x86 < 0x19 && !cpu_smt_possible()) {
setup_force_cpu_cap(X86_FEATURE_SRSO_NO);
srso_mitigation = SRSO_MITIGATION_NONE;
return;
}
and, in particular, sets srso_mitigation to NONE. This leads to
reporting
Speculative Return Stack Overflow: Vulnerable
on Zen2 machines.
There's a far bigger confusion with what SRSO_NO means and how it is
used in the code but this will be a matter of future fixes and
restructuring to how the SRSO mitigation gets determined.
Fix the reporting issue for now.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: David Kaplan <david.kaplan@amd.com>
Link: https://lore.kernel.org/20250513110405.15872-1-bp@kernel.org
|
|
Modify the corresponding vccio according to the schematic of
Sonoff iHost. This change aligns the device tree with the actual
hardware design and improves peripheral stability.
Signed-off-by: Hao Zhang <hao.zhang@coolkit.cn>
Link: https://lore.kernel.org/r/20250509101419.460473-3-hao.zhang@coolkit.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Reduce max-frequency from 50MHz to 25MHz to improve WiFi module stability
on some Sonoff iHost units. Remove unsupported or redundant properties,
and keep only minimal, validated configuration.
Signed-off-by: Hao Zhang <hao.zhang@coolkit.cn>
Link: https://lore.kernel.org/r/20250509101419.460473-2-hao.zhang@coolkit.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
When shared pages are being converted to private during kdump, additional
checks are performed. They include handling the case of a GHCB page being
contained within a huge page.
Currently, this check incorrectly skips a page just below the GHCB page from
being transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed later while
dumping guest memory for vmcore generation.
Correct the range to be checked for GHCB contained in a huge page. Also,
ensure that the skipped huge page containing the GHCB page is transitioned
back to private by applying the correct address mask later when changing GHCBs
to private at end of kdump preparation.
[ bp: Massage commit message. ]
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
|
|
When kdump is running makedumpfile to generate vmcore and dump SNP guest
memory it touches the VMSA page of the vCPU executing kdump.
It then results in unrecoverable #NPF/RMP faults as the VMSA page is
marked busy/in-use when the vCPU is running and subsequently a causes
guest softlockup/hang.
Additionally, other APs may be halted in guest mode and their VMSA pages
are marked busy and touching these VMSA pages during guest memory dump
will also cause #NPF.
Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out
of guest mode and then clear the VMSA bit on their VMSA pages.
If the vCPU running kdump is an AP, mark it's VMSA page as offline to
ensure that makedumpfile excludes that page while dumping guest memory.
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
|
|
Add the QCE and Crypto BAM DMA nodes.
Signed-off-by: Abhinaba Rakshit <quic_arakshit@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-enable-qce-for-qcs615-v2-2-c5e05fe22572@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CoreSight static replicator device isn't a part of the system MMIO
bus, as such it should not be a part of the soc node. Follow the example
of other platforms and move it out of the soc bus to the top-level (and
reoder ports to follow alphabetic order).
Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-10-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible to the SPS SIC in addition to the
"syscon" compatible and rename the node to follow the purpose of it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-9-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible for the SFPB device node in addition to
the "syscon" compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-8-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Fixes: f335b8af4fd5 ("ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Wi-Fi setup is identical to that of the Sony Xperia Z (Yuga).
Verified against the legacy kernel configuration inside
arch/arm/mach-msm/board-8064-regulator.c
using LineageOS 14.1 kernel sources.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-lg-nexus4-mako-enable-wifi-v1-1-e3b4a09d9f68@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the required nodes for sound playback via a connected external
display (DisplayPort over USB-C).
In user space just the following route needs to be set (e.g. using
ALSA UCM):
amixer -c0 cset name='DISPLAY_PORT_RX Audio Mixer MultiMedia1' 1
Afterwards one can play audio on the MultiMedia1 sound device, e.g.:
aplay -D plughw:0,0 test.wav
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250507-fp5-dp-sound-v4-5-4098e918a29e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Default pinctrl configurations for all QUP (Qualcomm Universal Peripheral)
Serial Engines (SEs) are missing in the SoC device tree. These
configurations are required by client teams when enabling any SEs as I2C,
SPI, or Serial protocols.
Add default pin configurations for Serial Engines (SEs) for all supported
protocols, including I2C, SPI, and UART, to the sa8775p device tree. This
change facilitates slave device driver clients to enable usecase with
minimal modifications.
Remove duplicate pin configurations from target-specific file as same pin
configuration is included in the SoC device tree.
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20250509090443.4107378-1-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DT entries for the sm8550 iris decoder.
Since the firmware is required to be signed, only enable
on Qualcomm development boards where the firmware is
publicly distributed.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-sm8x50-upstream-iris-8550-dt-v4-1-22ced9179da3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add LLCC node for SM8750 SoC.
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-sm8750_llcc_master-v5-4-d78dca6282a5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
|
|
The RTL8211E ethernet PHY driver has recently gained support for
controlling PHY LEDs via /sys/class/leds. The Bananapi M1 has three
LEDs connected to the RTL8211E PHY. Add the corresponding nodes to
the device tree.
Signed-off-by: Michael Klein <michael@fossekall.de>
Link: https://patch.msgid.link/20250508173657.8695-1-michael@fossekall.de
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
arch/x86/boot/startup/sme.c
arch/x86/coco/sev/core.c
arch/x86/kernel/fpu/core.c
arch/x86/kernel/fpu/xstate.c
Semantic conflict:
arch/x86/include/asm/sev-internal.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
arch/x86/mm/numa.c
arch/x86/mm/pgtable.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
arch/x86/kernel/cpu/bugs.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add syscon node for the PMU Interrupt Generation registers.
Additionally update the exynos-pmu node to provide a phandle
to pmu-intr-gen syscon.
These registers are required for CPU hotplug to be functional.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-4-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
