summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2023-04-24tpm, tpm_tis: Move interrupt mask checks into own functionLino Sanfilippo
Clean up wait_for_tpm_stat() by moving multiple similar interrupt mask checks into an own function. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Only handle supported interruptsLino Sanfilippo
According to the TPM Interface Specification (TIS) support for "stsValid" and "commandReady" interrupts is only optional. This has to be taken into account when handling the interrupts in functions like wait_for_tpm_stat(). To determine the supported interrupts use the capability query. Also adjust wait_for_tpm_stat() to only wait for interrupt reported status changes. After that process all the remaining status changes by polling the status register. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Claim locality before writing interrupt registersLino Sanfilippo
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR, TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts. Currently these modifications are done without holding a locality thus they have no effect. Fix this by claiming the (default) locality before the registers are written. Since now tpm_tis_gen_interrupt() is called with the locality already claimed remove locality request and release from this function. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Do not skip reset of original interrupt vectorLino Sanfilippo
If in tpm_tis_probe_irq_single() an error occurs after the original interrupt vector has been read, restore the interrupts before the error is returned. Since the caller does not check the error value, return -1 in any case that the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function tpm_tis_gen_interrupt() is not longer used, make it a void function. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failedLino Sanfilippo
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup the interrupts and then return with an error. This case is indicated by a missing TPM_CHIP_FLAG_IRQ flag in chip->flags. Currently the interrupt setup is only undone if tpm_tis_probe_irq_single() fails. Undo the setup also if tpm_tis_probe_irq() fails. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE registerLino Sanfilippo
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the TPM_INT_ENABLE register to shut the interrupts off. However modifying the register is only possible with a held locality. So claim the locality before disable_interrupts() is called. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Avoid cache incoherency in test for interruptsLino Sanfilippo
The interrupt handler that sets the boolean variable irq_tested may run on another CPU as the thread that checks irq_tested as part of the irq test in tpm_tis_send(). Since nothing guarantees cache coherency between CPUs for unsynchronized accesses to boolean variables the testing thread might not perceive the value change done in the interrupt handler. Avoid this issue by setting the bit TPM_TIS_IRQ_TESTED in the flags field of the tpm_tis_data struct and by accessing this field with the bit manipulating functions that provide cache coherency. Also convert all other existing sites to use the proper macros when accessing this bitfield. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm: remove unnecessary (void*) conversionsYu Zhe
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm: cr50: i2c: use jiffies to wait for tpm ready irqMark Hasemeyer
When waiting for a tpm ready completion, the cr50 i2c driver incorrectly assumes that the value of timeout_a is represented in milliseconds instead of jiffies. Remove the msecs_to_jiffies conversion. Signed-off-by: Mark Hasemeyer <markhas@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-12ipmi:ssif: Drop if blocks with always false conditionUwe Kleine-König
For both variants (platform and i2c driver) after a successful bind (i.e. .probe completed without error) driver data is set to a non-NULL value. So the return value of i2c_get_clientdata and dev_get_drvdata respectively are not NULL and so the if blocks are never executed. (And if you fear they might, they shouldn't return silently and yield a resource leak.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Message-Id: <20221230124431.202474-1-u.kleine-koenig@pengutronix.de> Signed-off-by: Corey Minyard <minyard@acm.org>
2023-04-12ipmi: fix SSIF not responding under certain cond.Zhang Yuchen
The ipmi communication is not restored after a specific version of BMC is upgraded on our server. The ipmi driver does not respond after printing the following log: ipmi_ssif: Invalid response getting flags: 1c 1 I found that after entering this branch, ssif_info->ssif_state always holds SSIF_GETTING_FLAGS and never return to IDLE. As a result, the driver cannot be loaded, because the driver status is checked during the unload process and must be IDLE in shutdown_ssif(): while (ssif_info->ssif_state != SSIF_IDLE) schedule_timeout(1); The process trigger this problem is: 1. One msg timeout and next msg start send, and call ssif_set_need_watch(). 2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change ssif_state to SSIF_GETTING_FLAGS. 3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error message is received, the second branch does not modify the ssif_state. 4. All retry action need IS_SSIF_IDLE() == True. Include retry action in watch_timeout(), msg_done_handler(). Sending msg does not work either. SSIF_IDLE is also checked in start_next_msg(). 5. The only thing that can be triggered in the SSIF driver is watch_timeout(), after destory_user(), this timer will stop too. So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS and can't send msg, no timer started, can't unload. We did a comparative test before and after adding this patch, and the result is effective. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Cc: stable@vger.kernel.org Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com> Message-Id: <20230412074907.80046-1-zhangyuchen.lcr@bytedance.com> Signed-off-by: Corey Minyard <minyard@acm.org>
2023-04-06tpm: atmel: Add explicit include for of.hRob Herring
With linux/acpi.h (in linux/tpm.h) no longer implicitly including of.h, add an explicit include of of.h to fix the following errors: drivers/char/tpm/tpm_atmel.h:50:14: error: implicit declaration of function 'of_find_node_by_name'; did you mean 'bus_find_device_by_name'? [-Werror=implicit-function-declaration] drivers/char/tpm/tpm_atmel.h:50:12: error: assignment to 'struct device_node *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] drivers/char/tpm/tpm_atmel.h:55:14: error: implicit declaration of function 'of_device_is_compatible'; did you mean 'fwnode_device_is_compatible'? [-Werror=implicit-function-declaration] ... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-04ipmi:ssif: Add send_retries incrementCorey Minyard
A recent change removed an increment of send_retries, re-add it. Fixes: 95767ed78a18 ipmi:ssif: resend_msg() cannot fail Reported-by: Pavel Machek <pavel@denx.de> Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <minyard@acm.org>
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-24hwrng: xgene - remove unnecessary (void*) conversionsYu Zhe
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-21tpm: Fix a possible dereference of ERR_PTR in tpm_init()Harshit Mogalapalli
Smatch reports: drivers/char/tpm/tpm-interface.c:470 tpm_init() error: 'tpm_class' dereferencing possible ERR_PTR() If class_create() returns error pointer, we are dereferencing a possible error pointer. Fix this by moving the dereference post error handling. Fixes: a010eb881243 ("tpm: fix up the tpm_class shutdown_pre pointer when created") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230321061416.626561-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-20Merge 6.3-rc3 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here and it resolves a merge conflict with: drivers/tty/serial/8250/8250_em.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-20Merge 6.3-rc3 into char-misc-nextGreg Kroah-Hartman
We need the mainline fixes in this branch for testing and other subsystem changes to be based properly on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17tpm: fix up the tpm_class shutdown_pre pointer when createdGreg Kroah-Hartman
Do not wait until long after the struct class has been created to set the shutdown_pre pointer for the tpm_class, assign it right away. This is the only in-kernel offender that tries to modify the device->class pointer contents after it has been assigned to a device, so fix that up by doing the function pointer assignment before it is matched with the device. Because of this, the patch should go through the driver core tree to allow later changes to struct device to be possible. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-integrity@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230313181843.1207845-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17driver core: class: remove module * from class_create()Greg Kroah-Hartman
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17tty: Convert hw_stopped in tty_struct to boolIlpo Järvinen
hw_stopped in tty_struct is used like bool, convert the variable type to bool. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Link: https://lore.kernel.org/r/20230309082035.14880-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16char:ipmi:Fix spelling mistake "asychronously" -> "asynchronously"zipeng zhang
There is a spelling mistake in the comment information. Fix it. Signed-off-by: zipeng zhang <zhangzipeng0@foxmail.com> Message-Id: <tencent_F0BFF85BC7C1FC84E440A7B7D364D2ED4209@qq.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2023-03-14hwrng: meson - remove not needed call to platform_set_drvdataHeiner Kallweit
drvdata isn't used, therefore remove this call. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14hwrng: meson - use devm_clk_get_optional_enabledHeiner Kallweit
Use devm_clk_get_optional_enabled() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14hwrng: meson - remove unused member of struct meson_rng_dataHeiner Kallweit
Member pdev isn't used, remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14hwrng: xgene - Improve error reporting for problems during .remove()Uwe Kleine-König
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. As the driver already emits a better error message than the core, suppress the generic error message by returning zero unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-12tpm: disable hwrng for fTPM on some AMD designsMario Limonciello
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439d58db ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-03-12tpm/eventlog: Don't abort tpm_read_log on faulty ACPI addressMorten Linderud
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log") Tested-by: Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by: Morten Linderud <morten@linderud.pw> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-03-10hwrng: xgene - Simplify using devm_clk_get_optional_enabled()Uwe Kleine-König
Instead of ignoring errors returned by devm_clk_get() and manually enabling the clk for the whole lifetime of the bound device, use devm_clk_get_optional_enabled(). This is simpler and also more correct as it doesn't ignore errors. This is also more correct because now the call to clk_disable_unprepare() can be dropped from xgene_rng_remove() which happened while the hwrn device was still registered. With the devm callback disabling the clk happens correctly only after devm_hwrng_register() is undone. As a result struct xgene_rng_dev::clk is only used in xgene_rng_probe, and so the struct member can be replaced by a local variable. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-10hwrng: xgene - Simplify using dev_err_probe()Uwe Kleine-König
dev_err_probe simplifies the idiom: if (ret != -EPROBE_DEFER) dev_err(...) return ret; , emits the error code in a human readable way and even yields a useful entry in /sys/kernel/debug/devices_deferred in the EPROBE_DEFER case. So simplify and at the same time improve the driver by using dev_err_probe(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-09char: pcmcia: remove all the driversJiri Slaby
These char PCMCIA drivers are buggy[1] and receive only minimal care. It was concluded[2], that we should try to remove most pcmcia drivers completely. Let's start with these char broken one. Note that I also removed a UAPI header: include/uapi/linux/cm4000_cs.h. I found only coccinelle tests mentioning some ioctl constants from that file. But they are not actually used. Anyway, should someone complain, we may reintroduce the header (or its parts). [1] https://lore.kernel.org/all/f41c2765-80e0-48bc-b1e4-8cfd3230fd4a@www.fastmail.com/ [2] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/ Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: "Hyunwoo Kim" <imv4bel@gmail.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230222092302.6348-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: ipwireless: move Kconfig entry to ttyJiri Slaby
The ipwireless' Kconfig entry is currently sitting in char/pcmcia. But the driver is in tty/. So move the entry to tty/ too. First, it makes sense to have the entry along the driver. Second, whole char/pcmcia is about to pass away. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Link: https://lore.kernel.org/r/20230222092302.6348-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-06cpumask: fix incorrect cpumask scanning result checksLinus Torvalds
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang <vernon2gm@gmail.com> Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov <yury.norov@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-02ipmi: simplify sysctl registrationLuis Chamberlain
register_sysctl_table() is a deprecated compatibility wrapper. register_sysctl() can do the directory creation for you so just use that. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Message-Id: <20230302204612.782387-3-mcgrof@kernel.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2023-03-02ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP_MMIO" to "select REGMAP_MMIO", which will also set REGMAP. Fixes: eb994594bc22 ("ipmi: bt-bmc: Use a regmap for register access") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <20230226053953.4681-2-rdunlap@infradead.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-24Merge tag 'tty-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-22Merge tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Small fixes to the SMBus IPMI and IPMB driver. Nothing big, cleanups, fixing names, and one small deviation from the specification fixed" * tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi: ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms' ipmi:ssif: Add a timer between request retries ipmi:ssif: Remove rtc_us_timer ipmi_ssif: Rename idle state and check ipmi:ssif: resend_msg() cannot fail
2023-02-21Merge tag 'v6.3-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
2023-02-20Merge tag 'asm-generic-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "Only three minor changes: a cross-platform series from Mike Rapoport to consolidate asm/agp.h between architectures, and a correctness change for __generic_cmpxchg_local() from Matt Evans" * tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: char/agp: introduce asm-generic/agp.h char/agp: consolidate {alloc,free}_gatt_pages() locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value
2023-02-13char/agp: consolidate {alloc,free}_gatt_pages()Mike Rapoport
There is a copy of alloc_gatt_pages() and free_gatt_pages in several architectures in arch/$ARCH/include/asm/agp.h. All the copies do exactly the same: alias alloc_gatt_pages() to __get_free_pages(GFP_KERNEL) and alias free_gatt_pages() to free_pages(). Define alloc_gatt_pages() and free_gatt_pages() in drivers/char/agp/agp.h and drop per-architecture definitions. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13tpm: add vendor flag to command code validationJulien Gomes
Some TPM 2.0 devices have support for additional commands which are not part of the TPM 2.0 specifications. These commands are identified with bit 29 of the 32 bits command codes. Contrarily to other fields of the TPMA_CC spec structure used to list available commands, the Vendor flag also has to be present in the command code itself (TPM_CC) when called. Add this flag to tpm_find_cc() mask to prevent blocking vendor command codes that can actually be supported by the underlying TPM device. Signed-off-by: Julien Gomes <julien@arista.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: Add reserved memory event logEddie James
Some platforms may desire to pass the event log up to Linux in the form of a reserved memory region. In particular, this is desirable for embedded systems or baseboard management controllers (BMCs) booting with U-Boot. IBM OpenBMC BMCs will be the first user. Add support for the reserved memory in the TPM core to find the region and map it. Signed-off-by: Eddie James <eajames@linux.ibm.com> [jarkko: removed spurious dev_info()'s from tpm_read_log_memory_region()] Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> [yang: return -ENOMEM when devm_memremap() fails] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: Use managed allocation for bios event logEddie James
Since the bios event log is freed in the device release function, let devres handle the deallocation. This will allow other memory allocation/mapping functions to be used for the bios event log. Signed-off-by: Eddie James <eajames@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: tis_i2c: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13tpm: st33zp24: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 00:02:40 +0000