| Age | Commit message (Collapse) | Author |
|---|
|
Fix seveal odd-looking places in SM8550's dispcc driver:
- duplicate entries in disp_cc_parent_map_4 and disp_cc_parent_map_5
- using &disp_cc_mdss_dptx0_link_div_clk_src as a source for
disp_cc_mdss_dptx1_usb_router_link_intf_clk
The SM8650 driver has been used as a reference.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-1-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the camera clock controller for camera clients
to be able to request for camcc clocks on SM8150 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-8-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Regera PLL ops are required to control the Regera PLL from clock
controller drivers, hence add the Regera PLL ops and configure
function.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-6-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Zonda PLL has a 16 bit signed alpha and in the cases where the alpha
value is greater than 0.5, the L value needs to be adjusted accordingly.
Thus update the logic to handle the signed alpha val.
Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-5-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, clk_zonda_pll_set_rate polls for the PLL to lock even if the
PLL is disabled. However, if the PLL is disabled then LOCK_DET will
never assert and we'll return an error. There is no reason to poll
LOCK_DET if the PLL is already disabled, so skip polling in this case.
Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-4-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate
API. The shift value is not same for different types of plls and
should be taken from the pll's .post_div_shift member.
Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.
Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The USB multiport controller needs a few additional resets, add these to
the driver.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-2-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 5.17
Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240722105733.13040-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 5.7
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240719134238.312191-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'struct freq_tbl' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
7595 43696 0 51291 c85b drivers/clk/qcom/mmcc-apq8084.o
After:
=====
text data bss dec hex filename
9867 41424 0 51291 c85b drivers/clk/qcom/mmcc-apq8084.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/e8aee66fa83a4e65f7e855eb8bdbc91275d6994b.1720962107.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
clk driver support.
We have the usual Qualcomm clk drivers, along with clk drivers for the
Sophgo and T-Head vendors, all to support some new SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO
emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
Qualcomm X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
match HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as
.of_match_table, because the driver is instantiated as MFD cell,
not as standalone platform driver. Populated .of_match_table
confused people few times to convert the code to
device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops
the system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and
avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: sunxi-ng r40: Constify struct regmap_config
clk: en7523: fix rate divider for slic and spi clocks
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
...
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull more qcom clk driver updates from Bjorn Andersson:
- Introduces helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm
X1Elite.
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
* tag 'qcom-clk-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
clk: qcom: common: Add interconnect clocks support
interconnect: icc-clk: Add devm_icc_clk_register
interconnect: icc-clk: Specify master/slave ids
dt-bindings: clock: qcom: Add AHB clock for SM8150
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error
clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config
|
|
For Venus V6 variant SoCs(sm8250, sc7280), the venus driver uses the newly
introduced dev_pm_genpd_set_hwmode() API to switch the vcodec GDSC to
HW/SW control modes at runtime. Hence use HW_CTRL_TRIGGER flag for vcodec
GDSC's on sm8250, sc7280 to register the set_hwmode_dev & get_hwmode_dev
callbacks for vcodec GDSC and allow the GDSC mode to be changed using
dev_pm_genpd_set_hwmode() API.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240624044809.17751-5-quic_jkona@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some GDSC client drivers require the GDSC mode to be switched dynamically
to HW mode at runtime to gain the power benefits. Typically such client
drivers require the GDSC to be brought up in SW mode initially to enable
the required dependent clocks and configure the hardware to proper state.
Once initial hardware set up is done, they switch the GDSC to HW mode to
save power. At the end of usecase, they switch the GDSC back to SW mode
and disable the GDSC.
Introduce HW_CTRL_TRIGGER flag to register the set_hwmode_dev and
get_hwmode_dev callbacks for GDSC's whose respective client drivers
require the GDSC mode to be switched dynamically at runtime using
dev_pm_genpd_set_hwmode() API.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240624044809.17751-4-quic_jkona@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There's two problems with shared RCGs.
The first problem is that they incorrectly report the parent after
commit 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for
parked RCGs"). That's because the cached CFG register value needs to be
populated when the clk is registered. clk_rcg2_shared_enable() writes
the cached CFG register value 'parked_cfg'. This value is initially zero
due to static initializers. If a driver calls clk_enable() before
setting a rate or parent, it will set the parent to '0' which is
(almost?) always XO, and may not reflect the parent at registration. In
the worst case, this switches the RCG from sourcing a fast PLL to the
slow crystal speed.
The second problem is that the force enable bit isn't cleared. The force
enable bit is only used during parking and unparking of shared RCGs.
Otherwise it shouldn't be set because it keeps the RCG enabled even when
all the branches on the output of the RCG are disabled (the hardware has
a feedback mechanism so that any child branches keep the RCG enabled
when the branch enable bit is set). This problem wastes power if the clk
is unused, and is harmful in the case that the clk framework disables
the parent of the force enabled RCG. In the latter case, the GDSC the
shared RCG is associated with will get wedged if the RCG's source clk is
disabled and the GDSC tries to enable the RCG to do "housekeeping" while
powering on.
Both of these problems combined with incorrect runtime PM usage in the
display driver lead to a black screen on Qualcomm sc7180 Trogdor
chromebooks. What happens is that the bootloader leaves the
'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force
enabled and parented to 'disp_cc_pll0'. The mdss driver probes and
runtime suspends, disabling the mdss_gdsc which uses the
'disp_cc_mdss_rot_clk_src' for "housekeeping". The
'disp_cc_mdss_rot_clk' is disabled during late init because the clk is
unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled
because the force enable bit was never cleared. Then 'disp_cc_pll0' is
disabled because it is also unused. That's because the clk framework
believes the parent of the RCG is XO when it isn't. A child device of
the mdss device (e.g. DSI) runtime resumes mdss which powers on the
mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is
parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged,
mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it
can't because the GDSC has wedged all the clks associated with the GDSC
causing clks to stay stuck off.
This leads to the following warning seen at boot and a black screen
because the display driver fails to probe.
disp_cc_mdss_mdp_clk status stuck at 'off'
WARNING: CPU: 1 PID: 81 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x114/0x168
Modules linked in:
CPU: 1 PID: 81 Comm: kworker/u16:4 Not tainted 6.7.0-g0dd3ee311255 #1 f5757d475795053fd2ad52247a070cd50dd046f2
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_branch_toggle+0x114/0x168
lr : clk_branch_toggle+0x110/0x168
sp : ffffffc08084b670
pmr_save: 00000060
x29: ffffffc08084b680 x28: ffffff808006de00 x27: 0000000000000001
x26: ffffff8080dbd4f4 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: ffffffd838461198 x21: ffffffd838007997
x20: ffffffd837541d5c x19: 0000000000000001 x18: 0000000000000004
x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd837070fac
x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001
x11: c0000000ffffdfff x10: ffffffd838347aa0 x9 : 08dadf92e516c000
x8 : 08dadf92e516c000 x7 : 0000000000000000 x6 : 0000000000000027
x5 : ffffffd8385a61f2 x4 : 0000000000000000 x3 : ffffffc08084b398
x2 : ffffffc08084b3a0 x1 : 00000000ffffdfff x0 : 00000000fffffff0
Call trace:
clk_branch_toggle+0x114/0x168
clk_branch2_enable+0x24/0x30
clk_core_enable+0x5c/0x1c8
clk_enable+0x38/0x58
clk_bulk_enable+0x40/0xb0
mdss_runtime_resume+0x68/0x258
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0x124/0x214
__rpm_callback+0x7c/0x15c
rpm_callback+0x30/0x88
rpm_resume+0x390/0x4d8
rpm_resume+0x43c/0x4d8
__pm_runtime_resume+0x54/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
device_add+0x52c/0x6fc
mipi_dsi_device_register_full+0x104/0x1a8
devm_mipi_dsi_device_register_full+0x28/0x78
ti_sn_bridge_probe+0x1dc/0x2bc
auxiliary_bus_probe+0x4c/0x94
really_probe+0xf8/0x270
__driver_probe_device+0xa8/0x130
driver_probe_device+0x44/0x104
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x94/0xe8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
deferred_probe_work_func+0x9c/0xd8
Fix these problems by parking shared RCGs at boot. This will properly
initialize the parked_cfg struct member so that the parent is reported
properly and ensure that the clk won't get stuck on or off because the
RCG is parented to the safe source (XO).
Fixes: 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs")
Reported-by: Stephen Boyd <sboyd@kernel.org>
Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org
Closes: https://issuetracker.google.com/319956935
Reported-by: Laura Nao <laura.nao@collabora.com>
Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the icc-clk framework to enable few clocks to be able to
create paths and use the peripherals connected on those NoCs.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240430064214.2030013-6-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike MSM platforms that manage NoC related clocks and scaling
from RPM, IPQ SoCs dont involve RPM in managing NoC related
clocks and there is no NoC scaling.
However, there is a requirement to enable some NoC interface
clocks for accessing the peripheral controllers present on
these NoCs. Though exposing these as normal clocks would work,
having a minimalistic interconnect driver to handle these clocks
would make it consistent with other Qualcomm platforms resulting
in common code paths. This is similar to msm8996-cbf's usage of
icc-clk framework.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240430064214.2030013-5-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Presently, icc-clk driver autogenerates the master and slave ids.
However, devices with multiple nodes on the interconnect could
have other constraints and may not match with the auto generated
node ids.
Hence, modify the driver to use the master/slave ids provided by
the caller instead of auto generating.
Also, update clk-cbf-8996 accordingly.
Acked-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240430064214.2030013-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allow the USB3 second and third GCC PHY pipe clocks to propagate the
rate to the pipe clocks provided by the QMP combo PHYs. The first
instance is already doing that.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-v1-1-7b2b04cad545@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Return of_clk_add_hw_provider() in order to transfer the error if it
fails.
Fixes: 09be1a39e685 ("clk: qcom: kpss-xcc: register it as clk provider")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240704073606.1976936-1-nichen@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
`lpass_audiocc_sc8280xp_regmap_config` and `lpasscc_sc8280x_regmap_config`
are not modified and can be declared as const to move their data to a
read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240703-clk-const-regmap-v1-8-7d15a0671d6f@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In case of all pipe clocks, there is a QMP PHY clock that is feeding them.
If, for whatever reason, the clock from the PHY is not enabled, halt bit
will not get set, and the clock controller driver will assume the clock
is stuck in a specific state. The way this is supposed to be properly
fixed is to defer the checking of the halt bit until after the PHY clock
has been initialized, but doing so complicates the clock controller
driver. In fact, since these pipe clocks are consumed by the PHY, while
the PHY is also the one providing the source, if clock gets stuck, the PHY
driver would be to blame. So instead of checking the halt bit in here,
just skip it and assume the PHY driver is handling the source clock
correctly.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240628-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v2-1-db3be54b1143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The mmc controller of the IPQ6018 does not support HS400 mode.
So adjust the maximum clock frequency of sdcc to 200 MHz (HS200).
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240620150122.1406631-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge SM8650 video and camera clock drivers through topic branch, to
make available the DeviceTree binding includes to the DeviceTree source
branches as well.
|
|
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-8-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support to the SM8650 video clock controller by extending
the SM8550 video clock controller, which is mostly identical
but SM8650 has few additional clocks and minor differences.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-5-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for videocc XO clk ares for consumer drivers to be
able to request this reset.
Fixes: f53153a37969 ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550")
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-4-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update wait_val fields as per the default hardware values of the GDSC as
otherwise it would lead to GDSC FSM state stuck causing power on/off
failures of the GSDC.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-6-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Also gpu_cc_cb_clk is recommended to be kept always ON, hence use
clk_branch2_aon_ops to keep the clock always ON.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-5-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GPU clocks/GDSCs have been marked critical from the clock driver
but the GPU driver votes on these resources as per the HW requirement.
In the case where these clocks & GDSCs are left enabled, would have
power impact and also cause GPU stability/corruptions.
Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON
flags for the GPU GDSCs.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-4-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the force mem core bit for UFS ICE clock to force the core on
signal to remain active during halt state of the clk. If force mem
core bit of the clock is not set, the memories of the subsystem will
not retain the logic across power states.
Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-3-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the GDSC wait_val fields as per the default hardware values as
otherwise they would lead to GDSC FSM state to be stuck and causing
failures to power on/off. Also add the GDSC flags as applicable and
add support to control PCIE GDSC's using collapse vote registers.
Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-2-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The UFS hw ctl clocks are not used by any consumers on SA8775P,
and these clocks are not using the correct clock ops to manage the
hw ctl of the branch clock, hence remove these clocks.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-1-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Fixes: 160758b05ab1 ("clk: qcom: add support for SM8350 GPUCC")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Link: https://lore.kernel.org/r/20240621-sm8350-gpucc-fixes-v1-1-22db60c7c5d3@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clock controller driver of QCA8K depends on MDIO_BUS because
of mdio_module_driver used to register the driver.
This patch fixes the following undefined symbols.
ERROR: modpost: "mdio_driver_register"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "mdio_driver_unregister"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_write"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_read"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406161634.B27sOs8B-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406162047.QkUMa2fG-lkp@intel.com/
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240617093806.3461165-1-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 8cab033628b1 ("clk: qcom: Add QCM2290 GPU clock controller driver")
adds the config CLK_QCM2290_GPUCC, which intends to select the support for
the QCM2290 Global Clock Controller. It however selects the non-existing
config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock
Controller is named QCM_GCC_2290.
Adjust the config to the intended one.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Fixes: 8cab033628b1 ("clk: qcom: Add QCM2290 GPU clock controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240620201431.93254-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This symbol is selected by a couple drivers, but isn't used by anyone
and hasn't been for years now. Drop it.
No functional change intended.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240619-drop-qcom-rpmcc-v1-1-b487c95162ef@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a driver for the GPU clock controller block found on the QCM2290 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-3-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL")
introduced an entry to the alpha offsets array, but diving into QCM2290
downstream and some documentation, it turned out that the name Huayra
apparently has been used quite liberally across many chips, even with
noticeably different hardware.
Introduce another set of offsets and a new configure function for the
Huayra PLL found on QCM2290. This is required e.g. for the consumers
of GPUCC_PLL0 to properly start.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-2-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clock controller driver of qca8386/qca8084 is registered
as the MDIO device, the hardware register is accessed by MDIO bus
that is normally used to access general PHY device, which is
different from the current existed qcom clock controller drivers
using ioremap to access hardware clock registers, nsscc-qca8k is
accessed via an MDIO bus.
MDIO bus is commonly utilized by both qca8386/qca8084 and other
PHY devices, so the mutex lock mdio_bus->mdio_lock should be
used instead of using the mutex lock of remap.
To access the hardware clock registers of qca8386/qca8084, there
is a special MDIO frame sequence, which needs to be sent to the
device.
Enable the reference clock before resetting the clock controller,
the reference clock rate is fixed to 50MHZ.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-5-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the clk_branch2_prepare_ops for supporting clock controller
where the hardware register is accessed by MDIO bus, and the
spin lock can't be used because of sleep during the MDIO
operation.
The clock is enabled by the .prepare instead of .enable when
the clk_branch2_prepare_ops is used.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-2-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfebc2 ("clk: qcom: camcc: Add camera clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support to update the GDSC transition delay values to avoid
the GDSC FSM state stuck issues without which it could lead to GDSC
power on/off failures.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-2-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The crypto_ahb and crypto_axi clks are hardware voteable.
This means that the halt bit isn't reliable because some
other voter in the system, e.g. TrustZone, could be keeping
the clk enabled when the kernel turns it off from clk_disable().
Make these clks use voting mode by changing the halt check to
BRANCH_HALT_VOTED and toggle the voting bit in the voting register
instead of directly controlling the branch by writing to the branch
register. This fixes stuck clk warnings seen on ipq9574 and saves
power by actually turning the clk off.
Also changes the CRYPTO_AHB_CLK_ENA & CRYPTO_AXI_CLK_ENA
offset to 0xb004 from 0x16014.
Cc: stable@vger.kernel.org
Fixes: f6b2bd9cb29a ("clk: qcom: gcc-ipq9574: Enable crypto clocks")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20240509105405.1262369-1-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
