| Age | Commit message (Collapse) | Author |
|---|
|
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
When boost is set for CPUs using acpi-cpufreq, the policy is not
updated which can cause boost to be incorrectly not reported.
Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Link: https://patch.msgid.link/20240626204723.6237-2-mario.limonciello@amd.com
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The behavior introduced in commit f37a4d6b4a2c ("cpufreq: Fix per-policy
boost behavior on SoCs using cpufreq_boost_set_sw()") sets up the boost
policy incorrectly when boost has been enabled by the platform firmware
initially even if a driver sets the policy up.
This is because policy_has_boost_freq() assumes that there is a frequency
table set up by the driver and that the boost frequencies are advertised
in that table. This assumption doesn't work for acpi-cpufreq or
amd-pstate. Only use this check to enable boost if it's not already
enabled instead of also disabling it if alreayd enabled.
Fixes: f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()")
Link: https://patch.msgid.link/20240626204723.6237-1-mario.limonciello@amd.com
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since this function is supposed to return boost_enabled which is anyway
a bool type make sure that it's return value is also marked as bool.
This helps maintain better consistency in data types being used.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240627060117.1809477-1-d-gole@ti.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some systems, the HWP (Hardware P-states) highest performance level
can change from the value set at boot-up. This behavior can lead to two
issues:
- The 'cpuinfo_max_freq' within the 'cpufreq' sysfs will not reflect
the CPU's highest achievable performance.
- Even if the CPU's highest performance level is increased after booting,
the CPU may not reach the full expected performance.
The availability of this feature is indicated by the CPUID instruction:
if CPUID[6].EAX[15] is set to 1, the feature is supported. When supported,
setting bit 2 of the MSR_HWP_INTERRUPT register enables notifications of
the highest performance level changes. Therefore, as part of enabling the
HWP interrupt, bit 2 of the MSR_HWP_INTERRUPT should also be set when this
feature is supported.
Upon a change in the highest performance level, a new HWP interrupt is
generated, with bit 3 of the MSR_HWP_STATUS register set, and the
MSR_HWP_CAPABILITIES register is updated with the new highest performance
limit.
The processing of the interrupt is the same as the guaranteed performance
change. Notify change to cpufreq core and update MSR_HWP_REQUEST with new
performance limits.
The current driver implementation already takes care of the highest
performance change as part of:
commit dfeeedc1bf57 ("cpufreq: intel_pstate: Update cpuinfo.max_freq
on HWP_CAP changes")
For example:
Before highest performance change interrupt:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3700000
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
3700000
After highest performance changes interrupt:
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
3900000
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3900000
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240624161109.1427640-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge more amd-pstate driver updates for 6.11 from Mario Limonciello:
"Add support for amd-pstate core performance boost support which
allows controlling which CPU cores can operate above nominal
frequencies for short periods of time."
* tag 'amd-pstate-v6.11-2024-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
|
|
|
|
When Core Performance Boost is disabled by the user, the
CPPC_REQ.max_perf should not exceed the nominal_perf since by definition
the frequencies between nominal_perf and the highest_perf are in the
boost range. Fix this in amd_pstate_update()
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/66f55232be01092c423f0523f68b82b80c293943.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The "Core Performance Boost (CPB) feature, when enabled in the BIOS,
allows the OS to control the highest performance for each individual
core. The active, passive and the guided modes of the amd-pstate driver
do support controlling the core frequency boost when this BIOS feature
is enabled. Additionally, the amd-pstate driver provides a sysfs
interface allowing the user to activate/deactivate this core performance
boost feature at runtime.
Add support for the set_boost callback in the active mode driver to
enable boost control via the cpufreq core. This ensures a consistent
boost control interface across all pstate modes, including passive
mode, guided mode, and active mode.
With this addition, all three pstate modes can support the same boost
control interface with unique interface and global CPB control. Each
CPU also supports individual boost control, allowing global CPB to
change all cores' boost states simultaneously. Specific CPUs can
update their boost states separately, ensuring all cores' boost
states are synchronized.
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20240626042733.3747-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
There are some other drivers also need to use the
MSR_K7_HWCR_CPB_DIS_BIT for CPB control bit, so it makes sense to move
the definition to a common header file to allow other driver to use it.
No intentional functional impact.
Suggested-by: Gautham Ranjal Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://lore.kernel.org/r/78b6c75e6cffddce3e950dd543af6ae9f8eeccc3.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
'st,stih418' is missing in the compatible list.
Add it in order to use the driver with stih418 platform.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Replace boot_cpu_has() with cpu_feature_enabled().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240624162714.1431182-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of changes for amd-pstate in 6.11 from Mario
Limonciello:
"* Enables amd-pstate by default in "shared memory" designs without
a dedicated MSR.
* Adds extra infrastructure for debugging problems.
* Bug fixes found for init/unload failure."
* tag 'amd-pstate-v6.11-2024-06-24' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq: simplify boolean parsing with kstrtobool in store function
cpufreq: amd-pstate: Don't create attributes when registration fails
cpufreq: amd-pstate: Make amd-pstate unit tests depend on amd-pstate
cpufreq/amd-pstate: fix setting policy current frequency value
cpufreq: amd-pstate: auto-load pstate driver by default
cpufreq: amd-pstate: enable shared memory type CPPC by default
cpufreq: amd-pstate: switch boot_cpu_has() to cpu_feature_enabled()
Documentation: PM: amd-pstate: add guided mode to the Operation mode
cpufreq: amd-pstate: add debug message while CPPC is supported and disabled by SBIOS
cpufreq: amd-pstate: show CPPC debug message if CPPC is not supported
cpufreq: amd-pstate: remove unused variable nominal_freq
cpufreq: amd-pstate: optimize the initial frequency values verification
cpufreq: amd-pstate: Allow users to write 'default' EPP string
|
|
More speed grades for the AM62Px SoC family have been defined which
unfortunately no longer align with the AM62x table. So create a new
table with these new speed grades defined for the AM62Px
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
As the AM62Ax SoC family matures more speed grades are being defined.
These new grades unfortunately no longer align with the AM62x SoC
family. Define a new table with new OPP speed grade limits for the
AM62Ax
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Update the cpufreq store function to use kstrtobool for parsing boolean
values. This simplifies the code and improves readability by using a
standard kernel function for boolean string conversion.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Link: https://lore.kernel.org/r/d392eba3bad1231776124c321cef8c184ce1482d.1718988436.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
It is reported that single-thread performance on some hybrid systems
dropped significantly after commit 7feec7430edd ("ACPI: CPPC: Only probe
for _CPC if CPPC v2 is acked") which prevented _CPC from being used if
the support for it had not been confirmed by the platform firmware.
The problem is that if the platform firmware does not confirm CPPC v2
support, cppc_get_perf_caps() returns an error which prevents the
intel_pstate driver from enabling ITMT. Consequently, the scheduler
does not get any hints on CPU performance differences, so in a hybrid
system some tasks may run on CPUs with lower capacity even though they
should be running on high-capacity CPUs.
To address this, modify intel_pstate to use the information from
MSR_HWP_CAPABILITIES to enable ITMT if CPPC is not available (which is
done already if the highest performance number coming from CPPC is not
realistic).
Fixes: 7feec7430edd ("ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked")
Closes: https://lore.kernel.org/linux-acpi/d01b0a1f-bd33-47fe-ab41-43843d8a374f@kfocus.org
Link: https://lore.kernel.org/linux-acpi/ZnD22b3Br1ng7alf@kf-XE
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
Cc: 5.19+ <stable@vger.kernel.org> # 5.19+
Link: https://patch.msgid.link/12460110.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If driver registration fails then immediately return the failure
instead of continuing to register attributes.
This fixes issues of falling back from amd-pstate to other drivers
when cpufreq init has failed for any reason.
Reported-by: alex.s.cochran@proton.me
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/20240623200918.52104-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
As the unit tests use a symbol from the driver an explicit dependency
is required.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406222016.R4A2TMs8-lkp@intel.com/
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/20240622215219.47911-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
When scaling min/max freq values were being setted,
the value of policy->cur need to update.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240227071133.3405003-1-li.meng@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If the `amd-pstate` driver is not loaded automatically by default,
it is because the kernel command line parameter has not been added.
To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
function to enable the desired mode (passive/active/guided) before registering
the driver instance.
This ensures that the driver is loaded correctly without relying on the kernel
command line parameter.
When there is no parameter added to command line, Kernel config will
provide the default mode to load.
Meanwhile, user can add driver mode in command line which will override
the kernel config default option.
Reported-by: Andrei Amuraritei <andamu@posteo.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/83301c4cea4f92fb19e14b23f2bac7facfd8bdbb.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The amd-pstate-epp driver has been implemented and resolves the
performance drop issue seen in passive mode for shared memory type
CPPC systems. Users who enable the active mode driver will not
experience a performance drop compared to the passive mode driver.
Therefore, the EPP driver should be loaded by default for shared
memory type CPPC system to get better performance.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/c705507cf3ee790e544251cfd897ed11e8e57712.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
replace the usage of the deprecated boot_cpu_has() function with
the modern cpu_feature_enabled() function. The switch to cpu_feature_enabled()
ensures compatibility with the latest CPU feature detection mechanisms and
improves code maintainability.
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/f1567593ac5e1d38343067e9c681a8c4b0707038.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
by SBIOS
If CPPC feature is supported by the CPU however the CPUID flag bit is not
set by SBIOS, the `amd_pstate` will be failed to load while system
booting.
So adding one more debug message to inform user to check the SBIOS setting,
The change also can help maintainers to debug why amd_pstate driver failed
to be loaded at system booting if the processor support CPPC.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/42c953616ac121bd1e5c329e83d015a02e6b32c7.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Add CPU ID checking in case the driver attempt to load on systems where
CPPC functionality is unavailable. And the warning message will not
be shown if CPPC is not supported.
It will also print debug message if the CPU has no CPPC support that
helps to debug the driver loading failure issue.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/CYYPR12MB8655D32EA18574C9497E888A9C122@CYYPR12MB8655.namprd12.prod.outlook.com/T/#t
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/437dbd581a4119465581330081d9b1e289482ba2.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
removed the unused variable `nominal_freq` for build warning.
This variable was defined and assigned a value in the previous code,
but it was not used in the subsequent code.
Closes: https://lore.kernel.org/oe-kbuild-all/202405080431.BPU6Yg9s-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/b7ef41557f71d40d098393ddb27f0fe1f23648ae.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
To enhance the debugging capability of the driver loading failure for
broken CPPC ACPI tables, it can optimize the expression by moving the
verification of `min_freq`, `nominal_freq`, and other dependency values
to the `amd_pstate_init_freq()` function where they are initialized.
If any of these values are incorrect, the `amd-pstate` driver will not be registered.
By ensuring that these values are correct before they are used, it will facilitate
the debugging process when encountering driver loading failures due to faulty CPPC
ACPI tables from BIOS
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f9793f8451c1832e34cc9dc35f89c653b39cfe38.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.
Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Replace sprintf() and scnprintf() with sysfs_emit() and sysfs_emit_at()
in the cpufreq core.
This ensures safer buffer handling and consistency with sysfs interfaces.
Update show_scaling_available_governors() and related functions for
compliance with the new API.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240619081520.259971-1-perry.yuan@amd.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change hybrid scaling factor for Lunar Lake.
Scaling factor is 1.15 for P-cores compared to E-cores.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240618055221.446108-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Arrow Lake uses the same scaling factor as Meteor Lake, so reuse the
same scaling factor.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240618055221.446108-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Support for the Allwinner H618, H618 and H700 was added to the sun50i
cpufreq-nvmem driver recently [1] however at the time some operating
points supported by the H700 (1.008, 1.032 and 1.512 GHz) and in use by
vendor BSPs were found to be unstable during testing, so the H700 speed
bin and the 1.032 GHz OPP were not included in the mainline driver.
Retesting with kernel 6.10rc2 (which carries additional fixes for the
driver) now shows stable operation with these points.
Add the H700 speed bin to the driver.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
[1] https://lore.kernel.org/linux-sunxi/20240418154408.1740047-1-andre.przywara@arm.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver updates for v6.11 from Mario Mario Limonciello:
"Add support for "Fast CPPC" which allows some CPUs to operate a tighter
loop for passive mode."
* tag 'amd-pstate-v6.11-2024-06-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq: amd-pstate: change cpu freq transition delay for some models
x86/cpufeatures: Add AMD FAST CPPC feature flag
|
|
|
|
There is a corner case where the desired_perf is exactly same as the old
perf, but the actual current freq is not.
This happens during S3 while the cpufreq governor is set to powersave.
During cpufreq resume process, the booting CPU's new_freq obtained via
.get() is the highest frequency, while the policy->cur and
cpu->perf_ctrls.desired_perf are set to the lowest level (powersave
governor). This causes the warning: "CPU frequency out of sync:", and
the cpufreq core sets policy->cur to new_freq.
Then the governor->limits() calls cppc_cpufreq_set_target() to
configures the CPU frequency and returns directly because the
desired_perf converted from target_freq is same as the
cpu->perf_ctrls.desired_perf and both are the lowest_perf.
Since target_freq and policy->cur have been already compared in
__cpufreq_driver_target(), there's no need to compare them again here.
Drop the comparison.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
[ Viresh: Updated commit message / subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some of AMD ZEN4 APU/CPU have support for adjusting the CPU core
clock more quickly and presicely according to CPU work loading.
This is advertised by the Fast CPPC x86 feature.
This change will only be effective in the *passive mode* of
AMD pstate driver. From the test results of different
transition delay values, 600us is chosen to make a balance
between performance and power consumption.
Some test results on AMD Ryzen 7840HS(Phoenix) APU:
1. Tbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Tbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 2010 2804 8768 17171 16170 15132 15027
Throughput/(MB/s) 114 259 1041 3010 3135 4851 4605
PPW 0.0567 0.0923 0.1187 0.1752 0.1938 0.3205 0.3064
600us Clients 1 2 4 8 12 16 32
Energy/Joules 2115 (5.22%) 2388 (-14.84%) 10700(22.03%) 16716 (-2.65%) 15939 (-1.43%) 15053 (-0.52%) 15083 (0.37% )
Throughput/(MB/s) 122 (7.02%) 234 (-9.65% ) 1188 (14.12%) 3003 (-0.23%) 3143 (0.26% ) 4842 (-0.19%) 4603 (-0.04%)
PPW 0.0576(1.59%) 0.0979(6.07% ) 0.111(-6.49%) 0.1796(2.51% ) 0.1971(1.70% ) 0.3216(0.34% ) 0.3051(-0.42%)
============= =================== ============== ================ ============= =============== ============== =============== ===============
2.Dbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Dbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 4890 3779 3567 5157 5611 6500 8163
Throughput/(MB/s) 327 167 220 577 775 938 1397
PPW 0.0668 0.0441 0.0616 0.1118 0.1381 0.1443 0.1711
600us Clients 1 2 4 8 12 16 32
Energy/Joules 4915 (0.51%) 4912 (29.98%) 3506 (-1.71%) 4907 (-4.85% ) 5011 (-10.69%) 5672 (-12.74%) 8141 (-0.27%)
Throughput/(MB/s) 348 (6.42%) 284 (70.06%) 220 (0.00% ) 518 (-10.23%) 712 (-8.13% ) 854 (-8.96% ) 1475 (5.58% )
PPW 0.0708(5.99%) 0.0578(31.07%) 0.0627(1.79% ) 0.1055(-5.64% ) 0.142(2.82% ) 0.1505(4.30% ) 0.1811(5.84% )
============= =================== ============== =============== ============== =============== ============== =============== ===============
3.Hackbench(less time is better)
============= =========================== ==========================
hackbench governor:schedutil
============= =========================== ==========================
Trans Delay Process Mode Ave time(s) Thread Mode Ave time(s)
1000us 14.484 14.484
600us 14.418(-0.46%) 15.41(+6.39%)
============= =========================== ==========================
4.Perf_sched_bench(less time is better)
============= =================== ============== ============== ============== =============== =============== =============
Trans Delay perf_sched_bench governor:schedutil
============= =================== ============== ============== ============== =============== =============== =============
1000us Groups 1 2 4 8 12 24
AveTime(s) 1.64 2.851 5.878 11.636 16.093 26.395
600us Groups 1 2 4 8 12 24
AveTime(s) 1.69(3.05%) 2.845(-0.21%) 5.843(-0.60%) 11.576(-0.52%) 16.092(-0.01%) 26.32(-0.28%)
============= ================== ============== ============== ============== =============== =============== ==============
5.Sysbench(higher is better)
============= ================== ============== ================= ============== ================ =============== =================
Sysbench governor:schedutil
============= ================== ============== ================= ============== ================ =============== =================
1000us Thread 1 2 4 8 12 24
Ave events 6020.98 12273.39 24119.82 46171.57 47074.37 47831.72
600us Thread 1 2 4 8 12 24
Ave events 6154.82(2.22%) 12271.63(-0.01%) 24392.5(1.13%) 46117.64(-0.12%) 46852.19(-0.47%) 47678.92(-0.32%)
============= ================== ============== ================= ============== ================ =============== =================
In conclusion, a shorter transition delay
of cpu clock will make a quite positive effect to improve PPW
on Dbench test, in the meanwhile, keep stable performance
on Tbench, Hackbench, Perf_sched_bench and Sysbench.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is
enabled in Emerald Rapids.
The OOB identifying bits are same as for the prior generation CPUs
like Sapphire Rapids servers, so also add Emerald Rapids to the
intel_pstate_cpu_oob_ids[] list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use the same default EPPs as Meteor Lake generation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update the default balance_performance EPP to 64. This gives better
performance and also perf/watt compared to current value of 115.
For example:
Speedometer 2.1
score: +19%
Perf/watt: +5.25%
Webxprt 4 score
score: +12%
Perf/watt: +6.12%
3DMark Wildlife extreme unlimited score
score: +3.2%
Perf/watt: +11.5%
Geekbench6 MT
score: +2.14%
Perf/watt: +0.32%
Also update balance_power EPP default to 179. With this change:
Video Playback power is reduced by 52%
Team video conference power is reduced by 35%
With Power profile daemon now sets balance_power EPP on DC instead of
balance_performance, updating balance_power EPP will help to extend
battery life.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Handle deferred probing gracefully by using dev_err_probe() to not
spam console with unnecessary error messages.
Fixes: f88d152dc739 ("cpufreq: ti: Migrate to dev_pm_opp_set_config()")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.
Call Trace:
<TASK>
generic_exec_single+0x58/0x120
smp_call_function_single+0xbf/0x110
rdmsrl_on_cpu+0x46/0x60
intel_pstate_get_hwp_cap+0x1b/0x70
intel_pstate_update_limits+0x2a/0x60
acpi_processor_notify+0xb7/0x140
acpi_ev_notify_dispatch+0x3b/0x60
HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cpufreq/cpufreq-dt-platdev.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The patch updates the function documentation comment for
longhaul_setstate to adhere to the kernel-doc specification.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
