| Age | Commit message (Collapse) | Author |
|---|
|
The shared memory node used for communication between the firmware and
the OS should be compatible with "arm,scmi-shmem". Add the check for the
same while parsing the node before fetching the memory regions.
Link: https://lore.kernel.org/r/20210602073851.1005607-2-sudeep.holla@arm.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
0day CI kernel test robot reported following build error with randconfig
aarch64-linux-ld: drivers/firmware/arm_scmi/driver.o:(.rodata+0x1e0):
undefined reference to `scmi_mailbox_desc'
Fix the error by adding CONFIG_MAILBOX dependency for scmi_mailbox_desc.
Link: https://lore.kernel.org/r/20210603072631.1660963-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com
Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
ARM_SCMI_PROTOCOL depends on either MAILBOX or HAVE_ARM_SMCCC_DISCOVERY,
not MAILBOX alone. Fix the depedency in Kconfig file and driver to
reflect the same.
Link: https://lore.kernel.org/r/20210521134055.24271-1-etienne.carriere@linaro.org
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[sudeep.holla: Minor tweaks to subject and change log]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Clocks requiring non-atomic contexts are supported by the generic clock
PM layer since commit 0bfa0820c274 ("PM: clk: make PM clock layer
compatible with clocks that must sleep"). That means we can have
SCMI-based clocks be managed by the SCMI power domain now.
Link: https://lore.kernel.org/r/5q88n947-pon-4940-3or6-s54o4r361o5s@onlyvoer.pbz
Tested-by: Dien Pham <dien.pham.ry@renesas.com>
Reviewed-by: Gaku Inami <gaku.inami.xh@renesas.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
struct scmi_protocol_handle is declared twice, let us remove the duplicate
declaration.
Link: https://lore.kernel.org/r/20210427033031.4580-1-wanjiabing@vivo.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
[sudeep.holla: minor updates to the title and the changelog]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Having added the support for SCMI protocols as modules in order to let
vendors extend the SCMI core with their own additions it seems odd to
then force SCMI drivers built on top to use a static device table to
declare their devices since this way any new SCMI drivers addition
would need the core SCMI device table to be updated too.
Remove the static core device table and let SCMI drivers to simply declare
which device/protocol pair they need at initialization time: the core will
then take care to generate such devices dynamically during platform
initialization or at module loading time, as long as the requested
underlying protocol is defined in the devicetree.
Link: https://lore.kernel.org/r/20210316124903.35011-39-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Extend SCMI protocols accounting mechanism to address possible module
usage and add the support to possibly define new protocols as loadable
modules.
Keep the standard protocols built into the SCMI core.
Link: https://lore.kernel.org/r/20210316124903.35011-38-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Rename non devres managed notify_ops to use a naming pattern which exposes
the performed action verb as last token.
No functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-37-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Notification private data is currently accessible via handle->notify_priv,
this data was indeed meant to be private to the notification core support
and not to be accessible by SCMI drivers. Make it private hiding it
inside instance descriptor struct scmi_info and accessible only via
dedicated helpers.
Link: https://lore.kernel.org/r/20210316124903.35011-36-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Remove all the events registration code used to ease the transition to the
new interface based on protocol handles.
Link: https://lore.kernel.org/r/20210316124903.35011-35-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Remove unused core scmi_xfer wrappers now that we have migrated all
protocols to the new interface based on protocol handles.
Link: https://lore.kernel.org/r/20210316124903.35011-34-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all protocols and drivers have been ported to the new interface
based on protocol handles and get/put operations, remove all the legacy
transient initialization code.
Link: https://lore.kernel.org/r/20210316124903.35011-33-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the protocol private variable data have been moved out of
struct scmi_handle, mark all of its references as const.
Link: https://lore.kernel.org/r/20210316124903.35011-32-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-31-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->voltage_ops still
around to ease transition.
Remove handle->voltage_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-29-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations.
Remove handle->system_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-28-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-27-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->sensor_ops still
around to ease transition.
Remove handle->sensor_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-24-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-23-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->reset_ops still
around to ease transition.
Remove handle->reset_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-21-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-20-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->clk_ops still
around to ease transition.
Remove handle->clock_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-18-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-17-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Port the scmi genpd driver to the new SCMI power interface based on
protocol handles and common devm_get_ops().
Link: https://lore.kernel.org/r/20210316124903.35011-16-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->power_ops still
around to ease transition.
Remove handle->power_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-15-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that all the SCMI driver users have been migrated to the new interface
remove the legacy interface and all the transient code.
Link: https://lore.kernel.org/r/20210316124903.35011-14-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->perf_ops still
around to ease transition.
Remove handle->perf_priv now unused.
Link: https://lore.kernel.org/r/20210316124903.35011-12-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Port the SCMI base protocol to new protocol handles based interface.
Link: https://lore.kernel.org/r/20210316124903.35011-11-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add an helper to access from a protocol handle, the SCMI version data
which is exposed on sysfs. Such helper will be needed by SCMI base
protocol initialization once it will be moved to new protocol handles
scheme.
Link: https://lore.kernel.org/r/20210316124903.35011-10-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add new core SCMI transfer operations based on protocol handles to
enable protocols to builds and send their own protocol specific messages.
Keep old original scmi_xfer_ operations interface as wrappers around the
new interface in order to let coexist old and new interfaces to ease
protocol by protocol migration.
In order to support such migration the above wrappers and some
additional transient code is also introduced in this commit. It will be
later removed as a whole once the full migration of protocols and SCMI
drivers will have been completed.
Link: https://lore.kernel.org/r/20210316124903.35011-9-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Convert all refactored events registration routines to use protocol
handles.
In order to maintain bisectability and to allow protocols and drivers
to be later ported to the new protocol handle interface one by one,
introduce here also some transient code that will be removed later
in order to ease such transition.
Link: https://lore.kernel.org/r/20210316124903.35011-8-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a new refactored protocol events registration helper and invoke it
from the centralized initialization process triggered by get_ops() and
friends.
Also add a `get_num_sources` as a new optional callback amongst protocol
events operations. Finally remove events registration call-sites from
within the legacy protocol init routines.
Link: https://lore.kernel.org/r/20210316124903.35011-7-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Expose to the SCMI drivers a new alternative devres managed notifications
API based on protocol handles.
All drivers still keep using the old API, no functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-6-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Account for any active registered notifier against the proper related
protocol, do not consider pending event handlers, only active handlers
will concur to protocol usage accounting.
Link: https://lore.kernel.org/r/20210316124903.35011-5-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Expose to the SCMI drivers a new devres managed common protocols API
based on generic get/put methods and protocol handles.
All drivers still keep using the old API, no functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-4-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add basic protocol handles definitions and private data helpers.
A protocol handle identifies a protocol instance initialized against a
specific handle, it embeds all the references to the core SCMI transfer
methods that will be needed by a protocol implementation to build and
send its own protocol specific messages using common core methods.
As such, in the interface, a protocol handle will be passed down from
the core to the protocol specific initialization callback at init time.
Anyways, at this point only definitions are introduced, all protocols
initialization code and SCMI drivers probing is still based on the old
interface, so no functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-3-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Extend common protocol registration routines and provide some new generic
protocols get/put helpers that can track protocols usage and automatically
perform the proper initialization and de-initialization on demand when
required.
Convert all standard protocols to use this new registration scheme while
keeping them all still using the usual initialization logic bound to SCMI
devices probing.
Link: https://lore.kernel.org/r/20210316124903.35011-2-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
This change provides ARM SCMI Protocol based IIO device.
This driver provides support for Accelerometer and Gyroscope using
SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jyoti Bhayana <jbhayana@google.com>
Link: https://lore.kernel.org/r/20210212172235.507028-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210309231259.78050-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call scmi_notification_exit() only when SCMI platform driver instance has
been really successfully removed.
Link: https://lore.kernel.org/r/20210112191326.29091-1-cristian.marussi@arm.com
Fixes: 6b8a69131dc63 ("firmware: arm_scmi: Enable notification core")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Move the call outside the list mutex locking]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The SMC/HVC SCMI transport is modified to allow the completion of an
SCMI message to be indicated by an interrupt rather than the return of
the smc/hvc call. This accommodates the existing behavior of the
BrcmSTB SCMI "platform".
Link: https://lore.kernel.org/r/20201222145603.40192-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
[sudeep.holla: added call to reinit_completion, whitespace cleanup, dropped
irrelavant info in the commit log]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
|
Add a new interface to the existing perf_ops and export the information
about the power values scale.
This would be used by the cpufreq driver and Energy Model framework to
set the performance domains scale: milli-Watts or abstract scale.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into for-next/scmi
SCMI voltage domain management protocol support for v5.11
SCMI v3.0 voltage domain protocol support to discover the voltage levels
supported by the domains and to set/get the configuration and voltage
level of any given domain.
* tag 'scmi-voltage-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support to enumerated SCMI voltage domain device
firmware: arm_scmi: Add voltage domain management protocol support
dt-bindings: arm: Add support for SCMI Regulators
|
|
For sake of consistency, remove any residual naming based on _le
suffixes in SCMI sensors protocol, since little endianness is already
assumed across all of SCMI implementation and, as such, all currently
existent names do not explicitly state their endianness.
No functional change.
Link: https://lore.kernel.org/r/20201123162008.35814-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add support for new SCMI v3.0 SENSOR_UPDATE notification.
Link: https://lore.kernel.org/r/20201119174906.43862-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add SCMI v3.0 sensor support for CONFIG_GET/CONFIG_SET commands.
Link: https://lore.kernel.org/r/20201119174906.43862-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add new .reading_get_timestamped() method to sensor_ops to support SCMI v3.0
timestamped reads.
Link: https://lore.kernel.org/r/20201119174906.43862-5-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add SCMI voltage domain device name to the core list of supported protocol
devices so that it can be enumerated if the firmware supports it.
Link: https://lore.kernel.org/r/20201119191051.46363-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
