Age | Commit message (Collapse) | Author |
|
With adding sriov_vf check, we directly return EOPNOTSUPP in
ras_reset_error_count as we should not do anything on VF to reset RAS error
count.
This also fixes the issue that loading guest driver causes register
violations.
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set RAS EEPROM table version to v3 for umc v12_5.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for per-queue reset on SDMA v4.4.2 when running with:
1. MEC firmware version 17 or later
2. DPM indicates SDMA reset is supported
v2: Fixed supported firmware versions (Lijo)
Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for additional GFX11.5.2/11.5.3 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.5.2/11.5.3 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
JPEG is not supported on Vega only.
Fixes: 0a6e7b06bdbe ("drm/amdgpu: Remove JPEG from vega and carrizo video caps")
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement the GFX12 KCQ pipe reset, and disable the GFX12
kernel compute queue until the CPFW fully supports it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Checking hive is more readable.
The following smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6820 amdgpu_pci_slot_reset()
warn: iterator used outside loop: 'tmp_adev'
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Kernel doorbell BOs needs to be freed before ttm_fini.
Fixes: 54c30d2a8def ("drm/amdgpu: create kernel doorbell pages")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES queue deactivation and active status are already set in
mes_userq_unmap|map(), so the caller needn't set the queue_active
bit again.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add function for vcn queue reset to make driver to
do fine-grained reset instead of the whole gpu reset.
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Guest is reading/writing to snoop register which is a security violation
We moved the code to the host driver
And also added a validation on the guest side to check if it's guest
Signed-off-by: Masha Grinman <Masha.Grinman@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
|
|
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe742 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239c2f21e8f417854f81e5ff40edbebff)
Cc: stable@vger.kernel.org # 6.12.x
|
|
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b774 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca2325 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a1549555 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad451675155380c1dc1881a244ebde8e8df0a)
Cc: stable@vger.kernel.org
|
|
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SDMA, we still need kernel queues for paging so
they need to be initialized, but we no not want to
accept submissions from userspace when disable_kq
is set.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Plumb in support for disabling kernel queues.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
v5: clean up after removing extra sched.ready settings
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Plumb in support for disabling kernel queues in
GFX11. We have to bring up a GFX queue briefly in
order to initialize the clear state. After that
we can disable it.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we don't have kernel queues, the vmids can be used by
the MES for user queues.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make all resources available to user queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add proper checks for disable_kq functionality in
gfx helper functions. Add special logic for families
that require the clear state setup.
v2: use ring count as per Felix suggestion
v3: fix num_gfx_rings handling in amdgpu_gfx_graphics_queue_acquire()
v4: fix error code (Alex)
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This would be set by IPs which only accept submissions
from the kernel, not userspace, such as when kernel
queues are disabled. Don't expose the rings to userspace
and reject any submissions in the CS IOCTL.
v2: fix error code (Alex)
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On chips that support user queues, setting this option
will disable kernel queues to be used to validate
user queues without kernel queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Similar to KFD, prevent runtime pm while user queues are active.
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we can iterate across them when we need to manage
all user queues.
v2: add uq_mgr to adev list in amdgpu_userq_mgr_init
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the user queue IP support query to the drm_amdgpu_info_device
query.
Cc: marek.olsak@amd.com
Cc: prike.liang@amd.com
Cc: sunil.khatri@amd.com
Cc: yogesh.mohanmarimuthu@amd.com
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an INFO query to check if user queues are supported.
v2: switch to a mask of IPs (Marek)
v3: move to drm_amdgpu_info_device (Marek)
Cc: marek.olsak@amd.com
Cc: prike.liang@amd.com
Cc: sunil.khatri@amd.com
Cc: yogesh.mohanmarimuthu@amd.com
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a separate switch statement for the userq callback
assignment so that we can assign the callbacks for each
asic as the firmware becomes available.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With the ME details fixed, we can now consolidate
this state. Also split out the userq setup into a separate
switch statement so that we can set them per IP version
when the firmwares are ready.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The display is freezing because the amdgpu_userq_wait_ioctl()
is waiting for a non-user queue fence(specifically, the PT update fence).
RootCause:
The resume_work is initiated by both amdgpu_userq_suspend and
amdgpu_userqueue_ensure_ev_fence at same time. The amdgpu_userq_suspend
signals a dma-fence and subsequently triggers the resume_work, which is
intended to replace the existing fence by creating new dma-fence. However,
following this, the amdgpu_userqueue_ensure_ev_fence schedules another
resume_work that generates a new dma-fence, thereby replacing the one
created by amdgpu_userq_suspend. Consequently, the original fence will
never be signaled.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Warn if the number of pipes exceeds what the MES supports.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move it to amdgpu_mes to align with the compute and
sdma hqd masks. No functional change.
v2: rebase on new changes
v3: misc optimizations
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was leftover from MES bring up when we had MES
user queues in the kernel. It's no longer used so
remove it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leftover from the MES self tests that were removed previously.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make sure these are set properly to ensure compatibility if
we ever update the IOCTL interface.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Encountering a taint issue during the unloading of gpu_sched
due to the fence not being released/put. In this context,
amdgpu_vm_clear_freed is responsible for creating a job to
update the page table (PT). It allocates kmem_cache for
drm_sched_fence and returns the finished fence associated
with job->base.s_fence. In case of Usermode queue this finished
fence is added to the timeline sync object through
amdgpu_gem_update_bo_mapping, which is utilized by user
space to ensure the completion of the PT update.
[ 508.900587] =============================================================================
[ 508.900605] BUG drm_sched_fence (Tainted: G N): Objects remaining in drm_sched_fence on __kmem_cache_shutdown()
[ 508.900617] -----------------------------------------------------------------------------
[ 508.900627] Slab 0xffffe0cc04548780 objects=32 used=2 fp=0xffff8ea81521f000 flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
[ 508.900645] CPU: 3 UID: 0 PID: 2337 Comm: rmmod Tainted: G N 6.12.0+ #1
[ 508.900651] Tainted: [N]=TEST
[ 508.900653] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F34 06/10/2021
[ 508.900656] Call Trace:
[ 508.900659] <TASK>
[ 508.900665] dump_stack_lvl+0x70/0x90
[ 508.900674] dump_stack+0x14/0x20
[ 508.900678] slab_err+0xcb/0x110
[ 508.900687] ? srso_return_thunk+0x5/0x5f
[ 508.900692] ? try_to_grab_pending+0xd3/0x1d0
[ 508.900697] ? srso_return_thunk+0x5/0x5f
[ 508.900701] ? mutex_lock+0x17/0x50
[ 508.900708] __kmem_cache_shutdown+0x144/0x2d0
[ 508.900713] ? flush_rcu_work+0x50/0x60
[ 508.900719] kmem_cache_destroy+0x46/0x1f0
[ 508.900728] drm_sched_fence_slab_fini+0x19/0x970 [gpu_sched]
[ 508.900736] __do_sys_delete_module.constprop.0+0x184/0x320
[ 508.900744] ? srso_return_thunk+0x5/0x5f
[ 508.900747] ? debug_smp_processor_id+0x1b/0x30
[ 508.900754] __x64_sys_delete_module+0x16/0x20
[ 508.900758] x64_sys_call+0xdf/0x20d0
[ 508.900763] do_syscall_64+0x51/0x120
[ 508.900769] entry_SYSCALL_64_after_hwframe+0x76/0x7e
v2: call dma_fence_put in amdgpu_gem_va_update_vm
v3: Addressed review comments from Christian.
- calling amdgpu_gem_update_timeline_node before switch.
- puting a dma_fence in case of error or !timeline_syncobj.
v4: Addressed review comments from Christian.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To align with other headers.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This can be enabled now. We have the firmware checks
in place.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently disabled until the firmwares are officially
released.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
s/CONFIG_DRM_AMD_USERQ_GFX/CONFIG_DRM_AMDGPU_NAVI3X_USERQ/
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The feature is not navi3x specific at this point.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
I'd swear this was already fixed, but I guess the patch never
landed. Add it now.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|