summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-02-12drm/amd/display/dm: handle OEM i2c buses in i2c functionsAlex Deucher
Allow the creation of an OEM i2c bus and use the proper DC helpers for that case. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dc: add a new helper to fetch the OEM ddc_serviceAlex Deucher
This is the i2c bus used by OEMs for board specific i2c features like RGB. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop hw_support check in amdgpu_dm_i2c_xfer()Alex Deucher
DC supports SW i2c as well. Drop the check. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop extra parameters to create_i2c()Alex Deucher
link_index can be fetched from the ddc_service; no need for a separate parameter. res is not used. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-04Revert "drm/amd/display: Use HW lock mgr for PSR1"Tom Chung
This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-04drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml filesNathan Chancellor
Currently, there are several files in drm/amd/display that aim to have a higher -Wframe-larger-than value to avoid instances of that warning with a lower value from the user's configuration. However, with the way that it is currently implemented, it does not respect the user's request via CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain when new instances of the warning appear and break the build due to CONFIG_WERROR. Adjust the logic to switch from a hard coded -Wframe-larger-than value to only using the value as a minimum clamp and deferring to the requested value from CONFIG_FRAME_WARN if it is higher. Suggested-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-03drm/amd/display: Fix seamless boot sequenceLo-an Chen
[WHY] When the system powers up eDP with external monitors in seamless boot sequence, stutter get enabled before TTU and HUBP registers being programmed, which resulting in underflow. [HOW] Enable TTU in hubp_init. Change the sequence that do not perpare_bandwidth and optimize_bandwidth while having seamless boot streams. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-03drm/amd/display: Fix out-of-bound accessesAlex Hung
[WHAT & HOW] hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4), but location can have size up to 6. As a result, it is necessary to check location against MAX_HPO_DP2_ENCODERS. Similiarly, disp_cfg_stream_location can be used as an array index which should be 0..5, so the ASSERT's conditions should be less without equal. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904 Reviewed-by: Austin Zheng <Austin.Zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-28drm/amd/display: restore invalid MSA timing check for freesyncMelissa Wen
This restores the original behavior that gets min/max freq from EDID and only set DP/eDP connector as freesync capable if "sink device is capable of rendering incoming video stream without MSA timing parameters", i.e., `allow_invalid_MSA_timing_params` is true. The condition was mistakenly removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP"). CC: Mario Limonciello <mario.limonciello@amd.com> CC: Alex Hung <alex.hung@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915 Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amd/display: Correct register address in dcn35loanchen
[Why] the offset address of mmCLK5_spll_field_8 was incorrect for dcn35 which causes SSC not to be enabled. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Lo-An Chen <lo-an.chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-24drm/amd/display: Optimize cursor position updatesAric Cyr
[why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position. [how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Add hubp cache reset when powergatingAric Cyr
[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changedSrinivasan Shanmugam
The function amdgpu_dm_crtc_mem_type_changed was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that new_plane_state and old_plane_state are valid before dereferencing them. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:11486 amdgpu_dm_crtc_mem_type_changed() error: 'new_plane_state' dereferencing possible ERR_PTR() drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 11475 static bool amdgpu_dm_crtc_mem_type_changed(struct drm_device *dev, 11476 struct drm_atomic_state *state, 11477 struct drm_crtc_state *crtc_state) 11478 { 11479 struct drm_plane *plane; 11480 struct drm_plane_state *new_plane_state, *old_plane_state; 11481 11482 drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { 11483 new_plane_state = drm_atomic_get_plane_state(state, plane); 11484 old_plane_state = drm_atomic_get_plane_state(state, plane); ^^^^^^^^^^^^^^^^^^^^^^^^^^ These functions can fail. 11485 --> 11486 if (old_plane_state->fb && new_plane_state->fb && 11487 get_mem_type(old_plane_state->fb) != get_mem_type(new_plane_state->fb)) 11488 return true; 11489 } 11490 11491 return false; 11492 } Fixes: 4caacd1671b7 ("drm/amd/display: Do not elevate mem_type change to full update") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: mark static functions noinline_for_stackTzung-Bi Shih
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the following errors: .../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than] .../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than] Mark static functions called by dml_prefetch_check() and dml_core_mode_support() noinline_for_stack to avoid them become huge functions and thus exceed the frame size limit. A way to reproduce: $ git checkout next-20250107 $ mkdir build_dir $ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH $ make LLVM=1 O=build_dir allmodconfig $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j The way how it chose static functions to mark: [0] Unset CONFIG_WERROR in build_dir/.config. To get display_mode_core.o without errors. [1] Get a function list called by dml_prefetch_check(). $ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \ | sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms [2] Get the non-inline function list. Objdump won't show the symbols if they are inline functions. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig [3] Get the full function list. Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in drivers/gpu/drm/amd/display/dc/dml2/Makefile. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline [4] Get the inline function list. If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good candidate to mark noinline. $ diff /tmp/orig /tmp/noinline Chosen functions and their stack sizes: CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144 CalculateExtraLatency [display_mode_core.o]:176 CalculateTWait [display_mode_core.o]:64 CalculateVActiveBandwithSupport [display_mode_core.o]:112 set_calculate_prefetch_schedule_params [display_mode_core.o]:48 CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544 calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320 calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272 CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208 CalculateODMMode [dml2_core_dcn4_calcs.o]:208 CalculateOutputLink [dml2_core_dcn4_calcs.o]:176 Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd: Add debug option to disable subvpAurabindo Pillai
Some monitors flicker when subvp is enabled which maybe related to an uncommon timing they use. To isolate such issues, add a debug option to help isolate this the issue for debugging. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-13Merge tag 'amd-drm-next-6.14-2025-01-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.14-2025-01-10: amdgpu: - Fix max surface handling in DC - clang fixes - DCN 3.5 fixes - DCN 4.0.1 fixes - DC CRC fixes - DML updates - DSC fixes - PSR fixes - DC add some divide by 0 checks - SMU13 updates - SR-IOV fixes - RAS fixes - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates _ Fix RB bitmap setup - Fix doorbell ttm cleanup - Add CEC notifier support - DPIA updates - MST fixes amdkfd: - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110172731.2960668-1-alexander.deucher@amd.com
2025-01-10drm/amd/display: 3.2.316Ryan Seto
This version brings along following fixes: - Add some feature for secure display - Add replay desync error count tracking and reset - Update chip_cap defines and usage - Remove unnecessary eDP power down - Fix some stuttering/corruption issue on PSR panel - Cleanup and refactoring DML2.1 Acked-by: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: avoid reset DTBCLK at clock initCharlene Liu
[why & how] this is to init to HW real DTBCLK. and use real HW DTBCLK status to update internal logic state Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: improve dpia pre-trainPeichen Huang
[WHY] We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is because the outbox interrupt mechanism can not handle HPD immediately and require some improvement. [HOW] 1. not enable link if hpd_pending is true. 2. abort pre-train if training failed and hpd_pending is true. 3. check if 2 lane supported when it is alt mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Apply DML21 PatchesAustin Zheng
[Why & How] Add several DML21 fixes Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Use HW lock mgr for PSR1Tom Chung
[Why] Without the dmub hw lock, it may cause the lock timeout issue while do modeset on PSR1 eDP panel. [How] Allow dmub hw lock for PSR1. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Revised for Replay Pseudo vblank controlDennis Chan
[why & how] Revised Replay Full screen video Pseudo vblank control. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add a new flag for replay low hzRobin Chen
[Why & How] Add a new flag in replay_config to indicate the replay low hz status. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unused read_ono_state function from Hwss moduleKarthi Kandasamy
[Why] The functions read_ono_state are no longer in use and have been identified as redundant. Removing them helps streamline the codebase and improve maintainability by eliminating unnecessary code. [How] These unused functions were removed from Hwss module, ensuring that no functionality is affected, and the code is simplified. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unnecessary eDP power downYiling Chen
[why] When first time of link training is fail, eDP would be powered down and would not be powered up for next retry link training. It causes that all of retry link linking would be fail. [how] We has extracted both power up and down sequence from enable/disable link output function before DCN32. We remov eDP power down in dcn32_disable_link_output(). Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10Revert "drm/amd/display: Enable urgent latency adjustments for DCN35"Nicholas Susanto
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") [Why & How] Urgent latency increase caused 2.8K OLED monitor caused it to block this panel support P0. Reverting this change does not reintroduce the netflix corruption issue which it fixed. Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add SMU interface to get UMC count for dcn401Dillon Varone
[WHY&HOW] BIOS table will not always contain accurate UMC channel info when harvesting is enabled, so get the correct info from SMU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Initialize denominator defaults to 1Alex Hung
[WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Extend secure display to support DisplayCRC modeWayne Lin
[Why] For the legacy secure display, it involves PSP + DMUB to confgiure and retrieve the CRC/ROI result. Have requirement to support mode which all handled by driver only. [How] Add another "DisplayCRC" mode, which doesn't involve PSP + DMUB. All things are handled by the driver only Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Reduce accessing remote DPCD overheadWayne Lin
[Why] Observed frame rate get dropped by tool like glxgear. Even though the output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower. It's due to code path in some cases will trigger dm_dp_mst_is_port_support_mode() to read out remote Link status to assess the available bandwidth for dsc maniplation. Overhead of keep reading remote DPCD is considerable. [How] Store the remote link BW in mst_local_bw and use end-to-end full_pbn as an indicator to decide whether update the remote link bw or not. Whenever we need the info to assess the BW, visit the stored one first. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Validate mdoe under MST LCT=1 case as wellWayne Lin
[Why & How] Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode under dsc decoding at the last DP link config, we only validate the case when there is an UFP. However, if the MSTB LCT=1, there is no UFP. Under this case, use root_link_bw_in_kbps as the available bw to compare. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Update chip_cap defines and usageMichael Strauss
[WHY] The defines have also been updated with prefix AMD_ and atomfirmware.h has been temporarily updated with both sets of defines to allow the transition. This update is being made to standardize workaround chip_cap flags, in order to support more workaround flags in the future. [HOW] Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and checking for an exact match rather than the previous bitwise AND check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: [FW Promotion] Release 0.0.248.0Taimur Hassan
Refactoring some flags for replay Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add replay desync error count tracking and reset functionalityJack Chang
[Why & How] Build-up get/reset desync error count interface and implement the functions. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Log Hard Min Clocks and Phantom Pipe StatusSung Lee
[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Limit Scaling Ratio on DCN3.01Gabe Teeger
[why] Underflow and flickering was occuring due to high scaling ratios when resizing videos. [how] Limit the scaling ratios by increasing the max scaling factor Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: add CEC notifier to amdgpu driverKun Liu
This patch adds the cec_notifier feature to amdgpu driver. The changes will allow amdgpu driver code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amd/display: Increase sanitizer frame larger than limit when compile ↵Nathan Chancellor
testing with clang Commit 24909d9ec7c3 ("drm/amd/display: Overwriting dualDPP UBF values before usage") added a new warning in dml2/display_mode_core.c when building allmodconfig with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than] 6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) | ^ Commit be4e3509314a ("drm/amd/display: DML21 Reintegration For Various Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same configuration: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ In the case of the first warning, the stack usage was already at the limit at the parent change, so the offending change was rather innocuous. In the case of the second warning, there was a rather dramatic increase in stack usage compared to the parent: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ This is an unfortunate interaction between an issue with stack slot reuse in LLVM that gets exacerbated by sanitization (which gets enabled with all{mod,yes}config) and function calls using a much higher number of parameters than is typical in the kernel, necessitating passing most of these values on the stack. While it is possible that there should be source code changes to address these warnings, this code is difficult to modify for various reasons, as has been noted in other changes that have occurred for similar reasons, such as commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2"). Increase the frame larger than limit when compile testing with clang and the sanitizers enabled to avoid this breakage in all{mod,yes}config, as they are commonly used and valuable testing targets. While it is not the best to hide this issue, it is not really relevant when compile testing, as the sanitizers are commonly stressful on optimizations and they are only truly useful at runtime, which COMPILE_TEST states will not occur with the current build. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-07drm/connector: make mode_valid take a const struct drm_display_modeDmitry Baryshkov
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge take a const struct drm_display_mode argument. Change the mode_valid callback of drm_connector to also take a const argument. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-07drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()Dmitry Baryshkov
Make amdgpu_dm_connector_mode_valid() duplicate the mode during the test rather than modifying the passed mode. This is a preparation to converting the mode_valid() callback of drm_connector to take a const struct drm_display_mode argument. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-2-4f9498a4c822@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-06Revert "drm/amd/display: Optimize cursor position updates"Aurabindo Pillai
This reverts commit 88c7c56d07c108ed4de319c8dba44aa4b8a38dd1. SW and HW state are not always matching in some cases causing cursor to be disabled. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Promote DC to 3.2.315Martin Leung
This version brings along the following: - Add Interface to Dump DSC Caps from dm - Add DP required HBlank size calc to link interface - Add 6bpc RGB case for dcn32 output bpp calculations - Add VC for VESA Aux Backlight Control - Add support for setting multiple CRC windows in dc - Clean up SPL code and outdated interfaces in dcn401_clk_mgr - Disable replay and psr while VRR is enabled - Fix PSR-SU not support but still call the amdgpu_dm_psr_enable - Implement Replay Low Hz Visual Confirm - Extend dc_stream_get_crc to support 2nd crc engine - Update power gating logic for DCN35 hw Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend capability to get multiple ROI CRCsWayne Lin
[Why & How] We already extend our dm, dc and dmub to support setting of multiple CRC instances, now extend the capability to return back the ROI/CRC pair result from psp by specifying activated ROI instances. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add VC for VESA Aux Backlight ControlIswara Nagulendran
[WHY] There is no way to distinguish the static backlight control type being used and the VABC support without the use of a debugger or reading DPCD registers. [HOW] Add Visual Confirm support for VESA Aux-based Backlight Control. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Clean up SPL codeSamson Tam
[Why & How] Use helper functions for checking formats Apply cositing offset in rotation case Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-07-18 19:14:44 +0000