summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2025-03-21drm/amd/pm: Remove unnecessay UQ10 to UINT conversionAsad Kamal
Few of the metrics data for smu_v13_0_12 has not been reported in Q10 format, remove UQ10 to UINT conversion for those Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amd/pm: Remove unnecessay UQ10 to UINT conversionAsad Kamal
Few of the metrics data for smu_v13_0_6 has not been reported in Q10 format, remove UQ10 to UINT conversion for those v2: Move smu_v13_0_12 changes to separate patch(Kevin) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMAJesse.zhang@amd.com
This commit updates the VM flush implementation for the SDMA engine. - Added a new function `sdma_v4_4_2_get_invalidate_req` to construct the VM_INVALIDATE_ENG0_REQ register value for the specified VMID and flush type. This function ensures that all relevant page table cache levels (L1 PTEs, L2 PTEs, and L2 PDEs) are invalidated. - Modified the `sdma_v4_4_2_ring_emit_vm_flush` function to use the new `sdma_v4_4_2_get_invalidate_req` function. The updated function emits the necessary register writes and waits to perform a VM flush for the specified VMID. It updates the PTB address registers and issues a VM invalidation request using the specified VM invalidation engine. - Included the necessary header file `gc/gc_9_0_sh_mask.h` to provide access to the required register definitions. v2: vm flush by the vm inalidation packet (Lijo) v3: code stle and define thh macro for the vm invalidation packet (Christian) v4: Format definition sdma vm invalidate packet (Lijo) Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU ↵Jesse.zhang@amd.com
TLB flush - Modify the VM invalidation engine allocation logic to handle SDMA page rings. SDMA page rings now share the VM invalidation engine with SDMA gfx rings instead of allocating a separate engine. This change ensures efficient resource management and avoids the issue of insufficient VM invalidation engines. - Add synchronization for GPU TLB flush operations in gmc_v9_0.c. Use spin_lock and spin_unlock to ensure thread safety and prevent race conditions during TLB flush operations. This improves the stability and reliability of the driver, especially in multi-threaded environments. v2: replace the sdma ring check with a function `amdgpu_sdma_is_page_queue` to check if a ring is an SDMA page queue.(Lijo) v3: Add GC version check, only enabled on GC9.4.3/9.4.4/9.5.0 v4: Fix code style and add more detailed description (Christian) v5: Remove dependency on vm_inv_eng loop order, explicitly lookup shared inv_eng(Christian/Lijo) v6: Added search shared ring function amdgpu_sdma_get_shared_ring (Lijo) Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amd/amdgpu: Increase max rings to enable SDMA page ringJesse.zhang@amd.com
Increase the maximum number of rings supported by the AMDGPU driver from 133 to 149. This change is necessary to enable support for the SDMA page ring. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: Decode deferred error type in gfx aca bank parserXiang Liu
In the case of injecting uncorrected error with background workload, the deferred error among uncorrected errors need to be specified by checking the deferred and poison bits of status register. v2: refine checking for deferred error v2: log possiable DEs among CEs v2: generate CPER records for DEs among UEs Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUsSrinivasan Shanmugam
Enable the cleaner shader for GFX11.5.0/11.5.1 GPUs to provide data isolation between GPU workloads. The cleaner shader is responsible for clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps prevent data leakage and ensures accurate computation results. This update extends cleaner shader support to GFX11.5.0/11.5.1 GPUs, previously available for GFX11.0.3. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Mario Sopena-Novales <mario.novales@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/mes: clean up SDMA HQD loopAlex Deucher
Follow the same logic as the other IP types. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/mes: enable compute pipes across all MECAlex Deucher
Enable pipes on both MECs for MES. Fixes: 745f46b6a99f ("drm/amdgpu: enable mes v12 self test") Acked-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/mes: drop MES 10.x leftoversAlex Deucher
Leftover from MES bring up. There is no production MES support for MES 10.x. The rest of the MES 10.x code has already been removed so drop this. Acked-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/mes: optimize compute loop handlingAlex Deucher
Break when we get to the end of the supported pipes rather than continuing the loop. Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/sdma: guilty tracking is per instanceAlex Deucher
The gfx and page queues are per instance, so track them per instance. v2: drop extra parameter (Lijo) Fixes: fdbfaaaae06b ("drm/amdgpu: Improve SDMA reset logic with guilty queue tracking") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/sdma: fix engine reset handlingAlex Deucher
Move the kfd suspend/resume code into the caller. That is where the KFD is likely to detect a reset so on the KFD side there is no need to call them. Also add a mutex to lock the actual reset sequence. v2: make the locking per instance Fixes: bac38ca8c475 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+") Reviewed-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: remove invalid usage of sched.readyChristian König
I can't count how often I had to remove this nonsense. Probably doesn't need an explanation any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: add cleaner shader trace pointChristian König
Note when the cleaner shader is executed. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: add isolation trace pointChristian König
Note when we switch from one isolation owner to another. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: stop reserving VMIDs to enforce isolationChristian König
That was quite troublesome for gang submit. Completely drop this approach and enforce the isolation separately. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: rework how the cleaner shader is emitted v3Christian König
Instead of emitting the cleaner shader for every job which has the enforce_isolation flag set only emit it for the first submission from every client. v2: add missing NULL check v3: fix another NULL pointer deref Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: rework how isolation is enforced v2Christian König
Limiting the number of available VMIDs to enforce isolation causes some issues with gang submit and applying certain HW workarounds which require multiple VMIDs to work correctly. So instead start to track all submissions to the relevant engines in a per partition data structure and use the dma_fences of the submissions to enforce isolation similar to what a VMID limit does. v2: use ~0l for jobs without isolation to distinct it from kernel submissions which uses NULL for the owner. Add some warning when we are OOM. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: overwrite signaled fence in amdgpu_syncChristian König
This allows using amdgpu_sync even without peeking into the fences for a long time. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: use GFP_NOWAIT for memory allocationsChristian König
In the critical submission path memory allocations can't wait for reclaim since that can potentially wait for submissions to finish. Finally clean that up and mark most memory allocations in the critical path with GFP_NOWAIT. The only exception left is the dma_fence_array() used when no VMID is available, but that will be cleaned up later on. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amd/amdgpu: Revert "drm/amd/amdgpu: shorten the gfx idle worker timeout"Kenneth Feng
This reverts commit 55ff973fe1c053de143969cfc8b34baff084084a. Reason for revert: this causes some tests fail with call trace. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu/sdam: Skip SDMA queue reset for SRIOVAhmad Rehman
For SRIOV, skip the SDMA queue reset and return error. The engine/queue reset failure will trigger FLR in the sequence. v2: do not add queue reset support mask for sriov Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: Add support to load PSP TA v13.0.12 for SRIOVAhmad Rehman
Add case for 13.0.12. Signed-off-by: Ahmad Rehman <ahrehman@amd.com> Reviewed-by: Vignesh.Chander@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: Enable amdgpu_ras_resume for gfx 9.5.0Ellen Pan
This enables ras to be resumed after gpu recovery on mi350 sriov. Signed-off-by: Ellen Pan <yunru.pan@amd.com> Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdkfd: set precise mem ops caps to disabled for gfx 11 and 12Jonathan Kim
Clause instructions with precise memory enabled currently hang the shader so set capabilities flag to disabled since it's unsafe to use for debugging. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Lancelot Six <lancelot.six@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu: Skip pcie_replay_count sysfs creation for VFVictor Skvortsov
VFs cannot read the NAK_COUNTER register. This information is only available through PMFW metrics. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu: Add active_umc_mask to ras init_flagsCandice Li
Add active_umc_mask to ras init_flags. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19Documentation/amdgpu: Add debug_mask documentationLijo Lazar
Add description for debug_mask bit options. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amd/pm: Add debug bit for smu pool allocationLijo Lazar
In certain cases, it's desirable to avoid PMFW log transactions to system memory. Add a mask bit to decide whether to allocate smu pool in device memory or system memory. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu/vcn: adjust workload profile handlingAlex Deucher
No need to make the workload profile setup dependent on the results of cancelling the delayed work thread. We have all of the necessary checking in place for the workload profile reference counting, so separate the two. As it is now, we can theoretically end up with the call from begin_use happening while the worker thread is executing which would result in the profile not getting set for that submission. It should not affect the reference counting. v2: bail early if the the profile is already active (Lijo) Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu/gfx: adjust workload profile handlingAlex Deucher
No need to make the workload profile setup dependent on the results of cancelling the delayed work thread. We have all of the necessary checking in place for the workload profile reference counting, so separate the two. As it is now, we can theoretically end up with the call from begin_use happening while the worker thread is executing which would result in the profile not getting set for that submission. It should not affect the reference counting. v2: bail early if the the profile is already active (Lijo) Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu: Add EEPROM I2C address support for smu v13_0_12Candice Li
Add EEPROM I2C address support for smu v13_0_12. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu/vcn: fix ref counting for ring based profile handlingAlex Deucher
We need to make sure the workload profile ref counts are balanced. This isn't currently the case because we can increment the count on submissions, but the decrement may be delayed as work comes in. Track when we enable the workload profile so the references are balanced. v2: switch to a mutex and active flag v3: fix mutex init Fixes: 1443dd3c67f6 ("drm/amd/pm: fix and simplify workload handling") Cc: Yang Wang <kevinyang.wang@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu/gfx: fix ref counting for ring based profile handlingAlex Deucher
We need to make sure the workload profile ref counts are balanced. This isn't currently the case because we can increment the count on submissions, but the decrement may be delayed as work comes in. Track when we enable the workload profile so the references are balanced. v2: switch to a mutex and active flag v3: fix mutex init Fixes: 8fdb3958e396 ("drm/amdgpu/gfx: add ring helpers for setting workload profile") Cc: Yang Wang <kevinyang.wang@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Tested-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdkfd: Fix bug in config_dequeue_wait_countsHarish Kasiviswanathan
For certain ASICs where dequeue_wait_count don't need to be initialized, pm_config_dequeue_wait_counts_v9 return without filling in the packet information. However, the calling function interprets this as a success and sends the uninitialized packet to firmware causing hang. Fix the above bug by not calling pm_config_dequeue_wait_counts_v9 for ASICs that don't need the value to be initialized. v2: Removed redudant code. Tidy up code based on review comments v3: Don't call pm_config_dequeue_wait_counts_v9 for certain ASICs Fixes: ed962f8d0603 ("drm/amdkfd: Add pm_config_dequeue_wait_counts API") Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-19drm/amdgpu: grab an additional reference on the gang fence v2Christian König
We keep the gang submission fence around in adev, make sure that it stays alive. v2: fix memory leak on retry Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu/pm: Handle SCLK offset correctly in overdrive for smu 14.0.2Tomasz Pakuła
Currently, it seems like the code was carried over from RDNA3 because it assumes two possible values to set. RDNA4, instead of having: 0: min SCLK 1: max SCLK only has 0: SCLK offset This change makes it so it only reports current offset value instead of showing possible min/max values and their indices. Moreover, it now only accepts the offset as a value, without the indice index. Additionally, the lower bound was printed as %u by mistake. Old: OD_SCLK_OFFSET: 0: -500Mhz 1: 1000Mhz OD_MCLK: 0: 97Mhz 1: 1259MHz OD_VDDGFX_OFFSET: 0mV OD_RANGE: SCLK_OFFSET: -500Mhz 1000Mhz MCLK: 97Mhz 1500Mhz VDDGFX_OFFSET: -200mv 0mv New: OD_SCLK_OFFSET: 0Mhz OD_MCLK: 0: 97Mhz 1: 1259MHz OD_VDDGFX_OFFSET: 0mV OD_RANGE: SCLK_OFFSET: -500Mhz 1000Mhz MCLK: 97Mhz 1500Mhz VDDGFX_OFFSET: -200mv 0mv Setting this offset: Old: "s 1 <offset>" New: "s <offset>" Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036 Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1cfeb60e6e8837b1de5eb4e17df7cf31f4442144) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amd/display: Fix incorrect fw_state address in dmub_srvLo-an Chen
[WHY] The fw_state in dmub_srv was assigned with wrong address. The address was pointed to the firmware region. [HOW] Fix the firmware state by using DMUB_DEBUG_FW_STATE_OFFSET in dmub_cmd.h. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f57b38ac85a01bf03020cc0a9761d63e5c0ce197)
2025-03-18drm/amd/display: Use HW lock mgr for PSR1 when only one eDPMario Limonciello
[WHY] DMUB locking is important to make sure that registers aren't accessed while in PSR. Previously it was enabled but caused a deadlock in situations with multiple eDP panels. [HOW] Detect if multiple eDP panels are in use to decide whether to use lock. Refactor the function so that the first check is for PSR-SU and then replay is in use to prevent having to look up number of eDP panels for those configurations. Fixes: f245b400a223 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965 Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ed569e1279a3045d6b974226c814e071fa0193a6) Cc: stable@vger.kernel.org
2025-03-18drm/amd/display: Fix message for support_edp0_on_dp1Yilin Chen
[WHY] The info message was wrong when support_edp0_on_dp1 is enabled [HOW] Use correct info message for support_edp0_on_dp1 Fixes: f6d17270d18a ("drm/amd/display: add a quirk to enable eDP0 on DP1") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 79538e6365c99d7b1c3e560d1ea8d11ef8313465) Cc: stable@vger.kernel.org
2025-03-18drm/amdkfd: Fix user queue validation on Gfx7/8Philip Yang
To workaround queue full h/w issue on Gfx7/8, when application create AQL queue, the ring buffer bo allocate size is queue_size/2 and map queue_size ring buffer to GPU in 2 pieces using 2 attachments, each attachment map size is queue_size/2, with same ring_bo backing memory. For Gfx7/8, user queue buffer validation should use queue_size/2 to verify ring_bo allocation and mapping size. Fixes: 68e599db7a54 ("drm/amdkfd: Validate user queue buffers") Suggested-by: Tomáš Trnka <trnka@scm.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e7a477735f1771b9a9346a5fbd09d7ff0641723a) Cc: stable@vger.kernel.org
2025-03-18drm/amdgpu: Restore uncached behaviour on GFX12David Belanger
Always use MTYPE_UC if UNCACHED flag is specified. This makes kernarg region uncached and it restores usermode cache disable debug flag functionality. Do not set MTYPE_UC for COHERENT flag, on GFX12 coherence is handled by shader code. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit eb6cdfb807d038d9b9986b5c87188f28a4071eae) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amdgpu/gfx12: correct cleanup of 'me' field with gfx_v12_0_me_fini()Wentao Liang
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini() can only release 'pfp' field of 'gfx'. The release function of 'me' field should be gfx_v12_0_me_fini(). Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ebdc52607a46cda08972888178c6aa9cd6965141) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amdkfd: Fix instruction hazard in gfx12 trap handlerJay Cornwall
VALU instructions with SGPR source need wait states to avoid hazard with SALU using different SGPR. v2: Eliminate some hazards to reduce code explosion Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7e0459d453b911435673edd7a86eadc600c63238) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amdgpu/pm: wire up hwmon fan speed for smu 14.0.2Alex Deucher
Add callbacks for fan speed fetching. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4034 Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 90df6db62fa78a8ab0b705ec38db99c7973b95d6) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amd/pm: add unique_id for gfx12Harish Kasiviswanathan
Expose unique_id for gfx12 Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 16fbc18cb07470cd33fb5f37ad181b51583e6dc0) Cc: stable@vger.kernel.org # 6.12.x
2025-03-18drm/amdgpu: Remove JPEG from vega and carrizo video capsDavid Rosca
JPEG is only supported for VCN1+. Signed-off-by: David Rosca <david.rosca@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0a6e7b06bdbead2e43d56a2274b7e0c9c86d536e) Cc: stable@vger.kernel.org
2025-03-18drm/amdgpu: Fix JPEG video caps max size for navi1x and ravenDavid Rosca
8192x8192 is the maximum supported resolution. Signed-off-by: David Rosca <david.rosca@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6e0d2fde3ae8fdb5b47e10389f23ed2cb4daec5d) Cc: stable@vger.kernel.org
2025-03-18drm/amdgpu: Fix MPEG2, MPEG4 and VC1 video caps max sizeDavid Rosca
1920x1088 is the maximum supported resolution. Signed-off-by: David Rosca <david.rosca@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1a0807feb97082bff2b1342dbbe55a2a9a8bdb88) Cc: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-07-19 00:16:37 +0000