summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/arm/display
AgeCommit message (Collapse)Author
2019-07-23drm/komeda: remove set but not used variable 'old'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/arm/display/komeda/komeda_plane.c: In function komeda_plane_atomic_duplicate_state: drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35: warning: variable old set but not used [-Wunused-but-set-variable It is not used since commit 990dee3aa456 ("drm/komeda: Computing image enhancer internally") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190722055627.38008-1-yuehaibing@huawei.com
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-08drm/komeda: Computing image enhancer internallyjames qian wang (Arm Technology China)
Enable image enhancer when the input data flow is 2x+ upscaling. Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708070000.4945-1-james.qian.wang@arm.com
2019-07-08drm/komeda: Computing layer_split internallyjames qian wang (Arm Technology China)
For layer_split no need user to enable/disable it, but compute it in komeda internally, komeda will enable it if the scaling exceed the acceptable range of scaler. Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
2019-07-08drm/komeda: Remove layer_split propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - Instead of expecting userspace to compute this (and duplicating modeset code), the kernel driver should compute when it's necessary to enable layer_split mode to make a configuration possible. I.e. in komeda_plane_atomic_check() first try komeda_build_layer_data_flow() and if that fails, try komeda_build_layer_split_data_flow(), and set dflow.en_split accordingly. Assuming I understand somewhat correctly what this does. - If this is needed for validation then you want a debugfs file to force this one way or the other, or alternatively use ->atomic_print_state to dump such hidden driver-private state. Depends upon how you do your validation ofc. Fixes: a407a6509393 ("drm/komeda: Add layer split support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-4-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: remove img_enhancement propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - Instead of expecting userspace to compute this (and duplicating modeset code), the kernel driver should compute when it's possible to enable this better up/downscale mode (assuming I understood Liviu correctly on what this does) automatically. - If this is needed for validation then you want a debugfs file to force this one way or the other, or alternatively use ->atomic_print_state to dump such hidden driver-private state. Depends upon how you do your validation ofc. Fixes: 42b6f118f6d1 ("drm/komeda: Add image enhancement support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-3-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: remove slave_planes propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. Again this probably needs multiple pieces to solve this properly: - To make plane configuration less surprising to userspace you propably need to virtualize planes, and reorder which logical plane you map to which physical one dynamically. Instead of exposing a komeda-specific limitation to userspace and expecting them to dtrt. I think msm and rcar-du do that already (and others), if you need people to chat with or example code. - If this is needed for validation, again ->atomic_print_state and the infrastructure around that is your friend. Fixes: 3b9dfa4ef28c ("drm/komeda: Add slave pipeline support") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-2-daniel.vetter@ffwll.ch
2019-07-08drm/komeda: Remove clock ratio propertyDaniel Vetter
Properties are uapi like anything else, with all the usual rules regarding review, testcases, open source userspace ... Furthermore driver-private kms properties are highly discouraged, over the past few years we've realized we need to make a serious effort at better standardizing this stuff. From the discussion with Liviu the solution for these here needs multiple pieces: - For being able to reliably read the memory clock we need a DT property, plus maybe DT override snippets to fix it if it's wrong. - For exposing plane limitations to userspace there's TEST_ONLY. There is a bit a gap in telling userspace better that scaling doesn't work due to limits (atm a good strategy is to retry again without scaling when adding a plane didn't work the first time around). But that needs a more generic solution, not exposing something extremely komeda specific. - If this is needed by validation tools, you can still expose it in debugfs. We have an entire nice infrastructure for debug printing of kms objects already, see the various atomic_print_state callbacks and infrastructure around them. Fixes: 1f7f9ab7900e ("drm/komeda: Add engine clock requirement check for the downscaling") Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-1-daniel.vetter@ffwll.ch
2019-06-21drm/arm: Drop drm_gem_prime_export/importDaniel Vetter
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-12-daniel.vetter@ffwll.ch
2019-06-21drm/arm/komeda: Remove DRIVER_HAVE_IRQDaniel Vetter
Read the docs, komeda is not an old enough driver for this :-) Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-8-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-21drm/komeda: Make Komeda interrupts shareableAyan Halder
Komeda interrupts may be shared with other hardware blocks. One needs to use devm_request_irq() with IRQF_SHARED to create a shared interrupt handler. As a result of not using drm_irq_install() api, one needs to set "(struct drm_device *)->irq_enabled = true/false" to enable/disable vblank interrupts. Changes from v1:- 1. Squashed the following two patches into one (as the second patch is a consequence of the first one):- drm/komeda: Avoid using DRIVER_IRQ_SHARED drm/komeda: Enable/Disable vblank interrupts 2. Fixed the commit message (as pointed by Daniel Vetter) 3. Removed calls to 'drm_irq_uninstall()' as we are no longer using drm_irq_install() 4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not used anywhere. Signed-off-by: Ayan Halder <ayan.halder@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-21drm/komeda: fix 32-bit komeda_crtc_update_clock_ratioArnd Bergmann
clang points out a bug in the clock calculation on 32-bit, that leads to the clock_ratio always being zero: drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow] aclk = komeda_calc_aclk(kcrtc_st) << 32; Move the shift into the division to make it apply on a 64-bit variable. Also use the more expensive div64_u64() instead of div_u64() to account for pxlclk being a 64-bit integer. Fixes: 1f7f9ab7900e ("drm/komeda: Add engine clock requirement check for the downscaling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-19drm/komeda: Correct printk format specifier for "size_t"james qian wang (Arm Technology China)
Warnings popup when "make ARCH=i386" In file included from include/drm/drm_mm.h:49, from include/drm/drm_vma_manager.h:26, from include/drm/drm_gem.h:40, from drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:9: drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c: In function 'komeda_fb_afbc_size_check': drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:96:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] DRM_DEBUG_KMS("afbc size check failed, obj_size: 0x%lx. min_size 0x%x.\n", That leads by misuse "%lx" as format speicifier for size_t, correct it to "%zx" Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19komeda: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Enable writeback split supportjames qian wang (Arm Technology China)
Writeback split is also for workaround the size limitation of d71 scaler. Like layer_split, writeback downscaling also can use two scalers to handle the scaling half-by-half. The only differnence is writback needs a standalone component (splitter)'s help to split the composition result. The data pipeline of writeback split as below: /-> scaler-0 ->\ compiz -> splitter merger -> wb_layer -> memory \-> scaler-1 ->/ v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-19drm/komeda: Add new component komeda_splitterjames qian wang (Arm Technology China)
Similar to Layer Split, but Splitter is used for writeback, which splits the compiz result to two half parts and then feed them to two scalers. v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-19drm/komeda: Accept null writeback configurations for writebackjames qian wang (Arm Technology China)
User may send null writeback configurations for writeback connector like: - Only bind the writeback connector to crtc. - set a fb_id(0) to writeback_fb_id_property All above configurations are meaningless for writeback, but since they are still valid configurations, accept them. Depends on: - https://patchwork.freedesktop.org/series/60856/ Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-19drm/komeda: Refine function to_d71_input_idjames qian wang (Arm Technology China)
Since the component_state->input[i] is only valid when it is active, the content of input[i] is undefined if it is inactive. The user must check the state->active_inputs with input index firstly before using state->input[i]. Refine the function to_d71_input_id and directly move such check into it. Simplify the using and avoid problem that caller forget the valid check. Depends on: - https://patchwork.freedesktop.org/series/60856/ Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2019-06-19drm/komeda: Add slave pipeline supportLowry Li (Arm Technology China)
One crtc can use two komeda_pipeline, and one works as master and as slave. the slave pipeline doesn't have its own output and timing ctrlr, but pre-composite the input layer data flow and then feed the result to master. the pipeline configuration like: slave-layer-0 \ ... slave->CU slave-layer-4 / \ \ master-layer-0 --------> master->CU -> ... ... / master-layer-4 ------> Since komeda Compiz doesn't output alpha, so the slave->CU result only can be used as bottom input when blend it with master input data flows. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add layer split supportjames qian wang (Arm Technology China)
Komeda supports two types of layer split: - none-scaling split - scaling split Since D71 merger only support scaler as input, so for none-scaling split, the two layer dflow will be output to compiz directly. for scaling_split, the data flow will be merged by merger firstly, then output the merged data flow to compiz. Komeda handles the split in kernel completely to hide the detailed and complicated split calcualtion to user mode, for user only need to set the layer_split property to enable/disable it. v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add split support for scalerjames qian wang (Arm Technology China)
To achieve same caling effect compare with none split, the texel calculation need to use the same scaling ratio before split, so add "total_xxx" to pipeline to describe the hsize/vsize before split. Update pipeline and d71_scaler_update accordingly. v2: Rebase and addressed Liviu's comments Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add component komeda_mergerjames qian wang (Arm Technology China)
Introduce a new component komeda_merger, because D71 HW supports to split a whole image to two half parts and does the scaling independently. Merger merges two separate results to one, and output it to compositor or wb_layer For this patch: - Add the definition of komeda_merger/merger_state - Report and initialize komeda_merger according to the D71 HW. v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Rename main engine clk name "mclk" to "aclk"james qian wang (Arm Technology China)
To avoid confusion, unify the driver main engine clk name "mclk" to the spec name "aclk". Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Unify mclk/pclk/pipeline->aclk to one MCLKjames qian wang (Arm Technology China)
Current komeda driver uses three dedicated clks for a specific purpose: - mclk: main engine clock - pclk: APB clock - pipeline->aclk: AXI clock. But per spec the komeda HW only has three input clks: - ACLK: used for AXI masters, APB slave and most pipeline processing - PXCLK for pipeline 0: output pixel clock for pipeline 0 - PXCLK for pipeline 1: output pixel clock for pipeline 1 So one ACLK is enough, no need to split it to three mclk/pclk/axiclk. drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Adds zorder supportLowry Li (Arm Technology China)
- Creates the zpos property. - Implement komeda_crtc_normalize_zpos to replace drm_atomic_normalize_zpos, reasons as the following: 1. The drm_atomic_normalize_zpos allows to configure same zpos for different planes, but komeda doesn't support such configuration. 2. For further slave pipline case, Komeda need to calculate the max_slave_zorder, we will merge such calculation into komed_crtc_normalize_zpos to save a separated plane_state loop. 3. For feature none-scaling layer_split, which a plane_state will be assigned to two individual layers(left/right), which requires two normalize_zpos for this plane, plane_st->normalize_zpos will be used by left layer, normalize_zpos + 1 for right_layer. This patch series depends on: - https://patchwork.freedesktop.org/series/58710/ - https://patchwork.freedesktop.org/series/59000/ - https://patchwork.freedesktop.org/series/59002/ - https://patchwork.freedesktop.org/series/59747/ - https://patchwork.freedesktop.org/series/59915/ - https://patchwork.freedesktop.org/series/60083/ - https://patchwork.freedesktop.org/series/60698/ Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add format support for Y0L2, P010, YUV420_8/10BITjames qian wang (Arm Technology China)
- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to compatible with such block format. - Since DRM introduced a general block information to drm_format_info, the format_caps->tiled_size no long needed, delete it. - Build some fb utils functions for code sharing. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add komeda_fb_check_src_coordsjames qian wang (Arm Technology China)
Add komeda_fb_check_src_coords and check if the layer configured src rect can meet the requirement of fb and fb format. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Adds SMMU supportLowry Li (Arm Technology China)
Adds iommu_connect and disconnect for SMMU support, and configures TBU translation once SMMU has been attached to the display device. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> [fixed checking of error code returned by dp_wait_cond() and removed extraneous DRM_ERROR() calls] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Enable color-encoding (YUV format) supportLowry Li (Arm Technology China)
Adds color-encoding properties if layer can support YUV format. Updates HW YUV-RGB matrix state according to the color-encoding properties. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Update HW up-sampling on D71Lowry Li (Arm Technology China)
Updates HW up-sampling method according to the format type. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Adds limitation check for AFBC wide block not support Rot90Lowry Li (Arm Technology China)
Komeda series hardware doesn't support Rot90 for AFBC wide block. So add limitation check to reject it if such configuration has been posted. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add rotation support on Komeda driverLowry Li (Arm Technology China)
- Adds rotation property to plane. - Komeda display rotation support diverges from the specific formats, so need to check the user required rotation type with the format caps and reject the commit if it can not be supported. - In the layer validate flow, sets the rotation value to the layer state. If r90 or r270, swap the width and height of the data flow for next stage. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Clear enable bit in CU_INPUTx_CONTROLLowry Li (Arm Technology China)
Besides clearing the input ID to zero, D71 compiz also has input enable bit in CU_INPUTx_CONTROL which need to be cleared. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19arm/komeda: Convert dp_wait_cond() to return an error code.Liviu Dudau
dp_wait_cond() currently returns the number of retries left over which is hardly an useful information. Convert to returning -ETIMEDOUT when the wait times out, or 0 (zero) when condition is met before deadline. Also convert the users of the function to return the error value. Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
2019-06-19drm/komeda: Creates plane alpha and blend mode propertiesLowry Li (Arm Technology China)
Creates plane alpha and blend mode properties attached to plane. This patch depends on: - https://patchwork.freedesktop.org/series/59915/ - https://patchwork.freedesktop.org/series/58665/ - https://patchwork.freedesktop.org/series/59000/ - https://patchwork.freedesktop.org/series/59002/ - https://patchwork.freedesktop.org/series/59471/ Changes since v1: - Adds patch denpendency in the comment Changes since v2: - Remove [RFC] from the subject Changes since v3: - Rebase the code Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add image enhancement supportjames qian wang (Arm Technology China)
Besides scaling, Arm display scaler also can support image enhancement. For support it, Add a new property "img_enhancement" to plane, then user can turn on/off it by this property, and kernel follow user's requirement to maitain the state and enable/disable the real HW image enhancement. v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement" Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add engine clock requirement check for the downscalingjames qian wang (Arm Technology China)
For downscaling there is a restriction, the downscaling needed engine clock can not acceed the real engine clock, and the clock requirement mostly depend on the specific HW, to solve this problem: 1. Add a pipeline func - downscaling_clk_check for CORE to query the real HW if downscaling can be supported. 2. Add new property clock ratio which is the ratio of: (mclk << 32) / pxlclk then User driver can use this ratio to do the clock check to avoid post an invalid downscaling to kernel. v2: Rebase and Delete debug print Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add writeback scaling supportjames qian wang (Arm Technology China)
1. Add scaler to writeback pipeline to enable the writeback scaling support 2. Display HW can not do upscaling for writeback, check it when validate. v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Implement D71 scaler supportjames qian wang (Arm Technology China)
1. Add scaler component and initialize it according to D71 HW. 2. Implement d71_scaler_update/disable/dump v2: - Correct a typo - Constify component_funcs: d71_scaler_funcs Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add the initial scaler support for COREjames qian wang (Arm Technology China)
This patch add the initial and necessary logic for CORE to support scaler: - Complete the struct komeda_scaler and komeda_scaler_state for adding the scaler specific features and capablities. - Implement komeda_scaler_validate to check the scaler with the data flow configurations. - Enable scaling support for plane input path (layer input data flow). v2: Fix a typo, and rename "needs_scaling" to "en_scaling" Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Attach scaler to drm as private objectjames qian wang (Arm Technology China)
According to the komeda pipeline configuration, attach scaler to drm as private object. v2: Rebase Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Added AFBC support for komeda driverjames qian wang (Arm Technology China)
For supporting AFBC: 1. Check if the user requested modifier can be supported by display HW. 2. Check the obj->size with AFBC's requirement. 3. Configure HW according to the modifier (afbc features) This patch depends on: - https://patchwork.freedesktop.org/series/59915/ - https://patchwork.freedesktop.org/series/59000/ v2: Rebase and addressed Ayan's comments Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-19drm/komeda: Add writeback supportjames qian wang (Arm Technology China)
Komeda driver uses a individual component to describe the HW's writeback caps, but drivers doesn't define a new structure and still uses the existing "struct komeda_layer" to describe this new component. The detailed changes as follow: 1. Initialize wb_layer according to HW and report it to CORE. 2. CORE exposes wb_layer as a resource to KMS by private_obj. 3. Report writeback supporting by add a wb_connector to KMS, and then wb_connector will take act as a component resources user, so the func komeda_wb_encoder_atomic_check claims komeda resources (scaler and wb_layer) accroding to its state configuration to the wb_connector. and the wb_state configuration will be validated on the specific component resources to see if the caps of component can meet the requirement of wb_connector. if not check failed. 4. Update irq_handler to notify the completion of writeback. NOTE: This change doesn't add scaling writeback support, that support will be added in the future after the scaler support. v2: Rebase v3: Rebase and constify the d71_wb_layer_funcs v4: Addressed Ayan's comments Depends on: - https://patchwork.freedesktop.org/series/59915/ Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Acked-by: Ayan Kumar Halder <ayan.halder@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-06drm/komeda: Potential error pointer dereferenceDan Carpenter
We need to check whether drm_atomic_get_crtc_state() returns an error pointer before dereferencing "crtc_st". Fixes: 9e5603094176 ("drm/komeda: Add komeda_plane/plane_helper_funcs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: "james qian wang (Arm Technology China)" <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-06drm/komeda: remove set but not used variable 'kcrtc'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/arm/display/komeda/komeda_plane.c: In function komeda_plane_atomic_check: drivers/gpu/drm/arm/display/komeda/komeda_plane.c:49:22: warning: variable kcrtc set but not used [-Wunused-but-set-variable] It is never used since introduction in commit 9e5603094176 ("drm/komeda: Add komeda_plane/plane_helper_funcs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-04drm/komeda: fixing of DMA mapping sg segment warningLowry Li (Arm Technology China)
Fixing the DMA mapping sg segment warning, which shows "DMA-API: mapping sg segment longer than device claims to support [len=921600] [max=65536]". Fixed by setting the max segment size at Komeda driver. This patch depends on: - https://patchwork.freedesktop.org/series/54448/ - https://patchwork.freedesktop.org/series/54449/ - https://patchwork.freedesktop.org/series/54450/ - https://patchwork.freedesktop.org/series/58976/ Changes since v1: - Adds member description - Adds patch denpendency in the comment Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-06-03drm/komeda: Constify the usage of komeda_component/pipeline/dev_funcsjames qian wang (Arm Technology China)
Depends on: - https://patchwork.freedesktop.org/series/58976/ - https://patchwork.freedesktop.org/series/59855/ Reported-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-05-09Merge tag 'drm-misc-next-fixes-2019-05-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - A handful of fixes from -next that just missed feature freeze - More panfrost fixes that went directly in -misc-next-fixes (various) - Fix searchpaths during build (Masahiro) - msm patch to fix the driver for chips without zap shader (Rob) - Fix freeing imported buffers in drm_gem_cma_free_object() (Noralf) Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190508205153.GA91135@art_vandelay
2019-05-07drm/komeda: Mark the local functions as staticjames qian wang (Arm Technology China)
Fix the kbuild test rebot reported warnings: - symbol was not declared. Should it be static? - missing braces around initializer Depends on: - https://patchwork.freedesktop.org/series/58976/ Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
generated by cgit (git 2.34.1) at 2025-07-16 10:31:25 +0000