summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/disp
AgeCommit message (Collapse)Author
2024-10-21drm/msm/dpu: drop dpu_format_check_modified_formatDmitry Baryshkov
The msm_kms_funcs::check_modified_format() callback is not used by the driver. Drop it completely. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/612239/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-4-617e1ecc4b7a@linaro.org
2024-10-21drm/msm/dpu: Add SA8775P supportMahadevan
Add definitions for the display hardware used on the Qualcomm SA8775P platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Mahadevan <quic_mahap@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/620499/ Link: https://lore.kernel.org/r/20241019-patchv3_1-v5-4-d2fb72c9a845@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-21drm/msm/dpu: drop LM_3 / LM_4 on MSM8998Dmitry Baryshkov
On the MSM8998 platform ther are no LM_3 and LM_4 blocks. Drop them from the MSM8998 catalog. Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612585/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-3-3363d03998bd@linaro.org
2024-10-21drm/msm/dpu: drop LM_3 / LM_4 on SDM845Dmitry Baryshkov
On the SDM845 platform ther are no LM_3 and LM_4 blocks. Drop them from the SDM845 catalog. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612586/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-2-3363d03998bd@linaro.org
2024-10-21drm/msm/dpu: on SDM845 move DSPP_3 to LM_5 blockDmitry Baryshkov
On the SDM845 platform the DSPP_3 is used by the LM_5. Correct corresponding entries in the sdm845_lm array. Fixes: c72375172194 ("drm/msm/dpu/catalog: define DSPP blocks found on sdm845") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612584/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-1-3363d03998bd@linaro.org
2024-10-21drm/msm/dpu: Add support for MSM8917Dmitry Baryshkov
Add support for MSM8917, which has MDP5 v1.15. It looks like trimmed down version of MSM8937. Even fewer PP, LM and no DSI1. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [Remove intr_start from CTLs config, reword the commit] Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/617311/ Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-4-594c3e3190b4@mainlining.org
2024-10-21drm/msm/dpu: Add support for MSM8937Dmitry Baryshkov
Add support for MSM8937, which has MDP5 v1.14. It looks like trimmed down version of MSM8996. Less SSPP, LM and PP blocks. No DSC, etc. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [Remove intr_start from CTLs config, reword the commit] Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/617312/ Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-3-594c3e3190b4@mainlining.org
2024-10-21drm/msm/dpu: Add support for MSM8953Dmitry Baryshkov
Add support for MSM8953, which has MDP5 v1.16. It looks like trimmed down version of MSM8996. Less SSPP, LM and PP blocks. No DSC, etc. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [Remove intr_start from CTLs config, reword the commit] Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/617310/ Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-2-594c3e3190b4@mainlining.org
2024-10-21drm/msm/dpu: Add support for MSM8996Konrad Dybcio
Add support for MSM8996, which - fun fact - was the SoC that this driver (or rather SDE, its downstream origin) was meant for and first tested on. It has some hardware that differs from the modern SoCs, so not a lot of current structs could have been reused. It's also seemingly the only SoC supported by DPU that uses RGB pipes. Note, by default this platform is still handled by the MDP5 driver unless the `msm.prefer_mdp5=false' parameter is provided. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> [DB: rebased on top of sblk changes, add dpu_rgb_sblk] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> [Removed intr_start from CTLs config, removed LM_3 and LM_4] Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/617309/ Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-1-594c3e3190b4@mainlining.org
2024-10-20Merge branch 'msm-fixes' into msm-nextRob Clark
Back-merge msm-fixes to resolve msm-next conflicts. Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-10-15drm/msm/dpu: don't always program merge_3d blockJessica Zhang
Only program the merge_3d block for the video phys encoder when the 3d blend mode is not NONE Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619095/ Link: https://lore.kernel.org/r/20241009-merge3d-fix-v1-1-0d0b6f5c244e@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-15drm/msm/dpu: Don't always set merge_3d pending flushJessica Zhang
Don't set the merge_3d pending flush bits if the mode_3d is BLEND_3D_NONE. Always flushing merge_3d can cause timeout issues when there are multiple commits with concurrent writeback enabled. This is because the video phys enc waits for the hw_ctl flush register to be completely cleared [1] in its wait_for_commit_done(), but the WB encoder always sets the merge_3d pending flush during each commit regardless of if the merge_3d is actually active. This means that the hw_ctl flush register will never be 0 when there are multiple CWB commits and the video phys enc will hit vblank timeout errors after the first CWB commit. [1] commit fe9df3f50c39 ("drm/msm/dpu: add real wait_for_commit_done()") Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250") Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/619092/ Link: https://lore.kernel.org/r/20241009-mode3d-fix-v1-1-c0258354fadc@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm: Allocate memory for disp snapshot with kvzalloc()Douglas Anderson
With the "drm/msm: add a display mmu fault handler" series [1] we saw issues in the field where memory allocation was failing when allocating space for registers in msm_disp_state_dump_regs(). Specifically we were seeing an order 5 allocation fail. It's not surprising that order 5 allocations will sometimes fail after the system has been up and running for a while. There's no need here for contiguous memory. Change the allocation to kvzalloc() which should make it much less likely to fail. [1] https://lore.kernel.org/r/20240628214848.4075651-1-quic_abhinavk@quicinc.com/ Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619658/ Link: https://lore.kernel.org/r/20241014093605.2.I72441365ffe91f3dceb17db0a8ec976af8139590@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()Douglas Anderson
If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619657/ Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()Dmitry Baryshkov
Make _dpu_crtc_setup_lm_bounds() check that CRTC width is not overflowing LM requirements. Rename the function accordingly. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/612237/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-3-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_checkDmitry Baryshkov
Historically CRTC resources (LMs and CTLs) were assigned in dpu_crtc_atomic_begin(). The commit 9222cdd27e82 ("drm/msm/dpu: move hw resource tracking to crtc state") simply moved resources to struct dpu_crtc_state, without changing the code sequence. Later on the commit b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset") rearanged the code, but still kept the cstate->num_mixers assignment to happen during commit phase. This makes dpu_crtc_state inconsistent between consequent atomic_check() calls. Move CRTC resource assignment to happen at the end of dpu_encoder_virt_atomic_check(). Fixes: b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612235/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-2-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: make sure phys resources are properly initializedDmitry Baryshkov
The commit b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") removed zero-init of the hw_ctl array, but didn't change the error condition, that checked for hw_ctl[i] being NULL. At the same time because of the early returns in case of an error dpu_encoder_phys might be left with the resources assigned in the previous state. Rework assigning of hw_pp / hw_ctl to the dpu_encoder_phys in order to make sure they are always set correctly. Fixes: b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612233/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-1-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-09-21Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...
2024-09-09treewide: correct the typo 'retun'WangYuli
There are some spelling mistakes of 'retun' in comments which should be instead of 'return'. Link: https://lkml.kernel.org/r/63D0F870EE8E87A0+20240906054008.390188-1-wangyuli@uniontech.com Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-02drm/msm/dpu: enable writeback on SM6350Dmitry Baryshkov
Enable WB2 hardware block, enabling writeback support on this platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Patchwork: https://patchwork.freedesktop.org/patch/570194/ Link: https://lore.kernel.org/r/20231203003203.1293087-5-dmitry.baryshkov@linaro.org
2024-09-02drm/msm/dpu: enable writeback on SM6125Dmitry Baryshkov
Enable WB2 hardware block, enabling writeback support on this platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570193/ Link: https://lore.kernel.org/r/20231203003203.1293087-4-dmitry.baryshkov@linaro.org
2024-09-02drm/msm/dpu: enable writeback on SC8108XDmitry Baryshkov
Enable WB2 hardware block, enabling writeback support on this platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570196/ Link: https://lore.kernel.org/r/20231203003203.1293087-3-dmitry.baryshkov@linaro.org
2024-09-02drm/msm/dpu: enable writeback on SM8150Dmitry Baryshkov
Enable WB2 hardware block, enabling writeback support on this platform. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570192/ Link: https://lore.kernel.org/r/20231203003203.1293087-2-dmitry.baryshkov@linaro.org [DB: picked up WB_SDM845_MASK from sdm845 patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-09-02drm/msm: fix %s null argument errorSherry Yang
The following build error was triggered because of NULL string argument: BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump': BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n", BUILDSTDERR: | ^~ BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] This happens from the commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem"). Using "(null)" instead to fix it. Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status") Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/611071/ Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-09-02drm/msm/dpu: Configure DP INTF/PHY selectorDmitry Baryshkov
Some platforms provides a mechanism for configuring the mapping between (one or two) DisplayPort intfs and their PHYs. In particular SC8180X requires this to be configured, since on this platform there are fewer controllers than PHYs. The change implements the logic for optionally configuring which PHY each of the DP INTFs should be connected to and marks the SC8180X DPU to program 2 entries. For now the request is simply to program the mapping 1:1, any support for alternative mappings is left until the use case arrise. Note that e.g. msm-4.14 unconditionally maps INTF 0 to PHY 0 on all platforms, so perhaps this is needed in order to get DisplayPort working on some other platforms as well. Co-developed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/600895/ Link: https://lore.kernel.org/r/20240625-dp-phy-sel-v3-1-c77c7066c454@linaro.org
2024-08-05drm/msm/dpu: take plane rotation into account for wide planesDmitry Baryshkov
Take into account the plane rotation and flipping when calculating src positions for the wide plane parts. This is not an issue yet, because rotation is only supported for the UBWC planes and wide UBWC planes are rejected anyway because in parallel multirect case only the half of the usual width is supported for tiled formats. However it's better to fix this now rather than stumbling upon it later. Fixes: 80e8ae3b38ab ("drm/msm/dpu: add support for wide planes") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/601059/ Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-3-5efb90cbb8be@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dpu: relax YUV requirementsDmitry Baryshkov
YUV formats require only CSC to be enabled. Even decimated formats should not require scaler. Relax the requirement and don't check for the scaler block while checking if YUV format can be enabled. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/601049/ Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-2-5efb90cbb8be@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dpu: limit QCM2290 to RGB formats onlyDmitry Baryshkov
The QCM2290 doesn't have CSC blocks, so it can not support YUV formats even on ViG blocks. Fix the formats declared by _VIG_SBLK_NOSCALE(). Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/601048/ Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-1-5efb90cbb8be@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dpu: cleanup FB if dpu_format_populate_layout failsDmitry Baryshkov
If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/600714/ Link: https://lore.kernel.org/r/20240625-dpu-mode-config-width-v5-1-501d984d634f@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable()Abhinav Kumar
For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/59 Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Patchwork: https://patchwork.freedesktop.org/patch/606729/ Link: https://lore.kernel.org/r/20240731191723.3050932-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dpu: don't play tricks with debug macrosDmitry Baryshkov
DPU debugging macros need to be converted to a proper drm_debug_* macros, however this is a going an intrusive patch, not suitable for a fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER to make sure that DPU debugging messages always end up in the drm debug messages and are controlled via the usual drm.debug mask. I don't think that it is a good idea for a generic DPU_DEBUG macro to be tied to DRM_UT_KMS. It is used to report a debug message from driver, so by default it should go to the DRM_UT_DRIVER channel. While refactoring debug macros later on we might end up with particular messages going to ATOMIC or KMS, but DRIVER should be the default. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/606932/ Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-07-01drm/msm/dpu: check ubwc support before adding compressed formatsAbhinav Kumar
On QCM2290 chipset DPU does not support UBWC. Add a dpu cap to indicate this and do not expose compressed formats in this case. changes since RFC: - use ubwc enc and dec version of mdss_data instead of catalog to decide if ubwc is supported Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/601392/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-06-25drm/msm/dpu: remove CRTC frame event callback registrationDmitry Baryshkov
The frame event callback is always set to dpu_crtc_frame_event_cb() (or to NULL) and the data is always either the CRTC itself or NULL (correpondingly). Thus drop the event callback registration, call the dpu_crtc_frame_event_cb() directly and gate on the dpu_enc->crtc assigned using dpu_encoder_assign_crtc(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/600751/ Link: https://lore.kernel.org/r/20240625-dpu-no-crtc-register-v3-1-1b161df13776@linaro.org
2024-06-25drm/msm/mdp5: Add MDP5 configuration for MSM8937Daniil Titov
Add the mdp5_cfg_hw entry for MDP5 version v1.14 found on msm8937. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/600513/ Link: https://lore.kernel.org/r/20240623-dsi-v2-2-a0ca70fb4846@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-25drm/msm/mdp5: Remove MDP_CAP_SRC_SPLIT from msm8x53_configBarnabás Czémán
Remove MDP_CAP_SRC_SPLIT from msm8x53_config because it is not referenced in downstream. Fixes: fb25d4474fa0 ("drm/msm/mdp5: Add configuration for MDP v1.16") Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/600521/ Link: https://lore.kernel.org/r/20240624-msm8953-mdp-fix-v1-1-be4d3262ebe3@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-24drm/msm/dpu: guard ctl irq callback register/unregisterBarnabás Czémán
CTLs on older qualcomm SOCs like msm8953 and msm8996 has not got interrupts, so better to skip CTL irq callback register/unregister make dpu_ctl_cfg be able to define without intr_start. Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/596854/ Link: https://lore.kernel.org/r/20240509-ctl_irq-v1-1-9433f2da9dc7@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-24drm/msm/dpu: rename dpu_hw_setup_vsync_source functionsDmitry Baryshkov
Rename dpu_hw_setup_vsync_source functions to make the names match the implementation: on DPU 5.x the TOP only contains timer setup, while 3.x and 4.x used MDP_VSYNC_SEL register to select TE source. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/598745/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-8-67a0116b5366@linaro.org
2024-06-24drm/msm/dpu: support setting the TE sourceDmitry Baryshkov
Make the DPU driver use the TE source specified in the DT. If none is specified, the driver defaults to the first GPIO (mdp_vsync_p). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/598733/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-7-67a0116b5366@linaro.org
2024-06-24drm/msm/dpu: rework vsync_source handlingDmitry Baryshkov
The struct msm_display_info has is_te_using_watchdog_timer field which is neither set anywhere nor is flexible enough to specify different sources. Replace it with the field specifying the vsync source using enum dpu_vsync_source. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/598738/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-5-67a0116b5366@linaro.org
2024-06-24drm/msm/dpu: pull the is_cmd_mode out of _dpu_encoder_update_vsync_source()Dmitry Baryshkov
Setting vsync source makes sense only for DSI CMD panels. Pull the is_cmd_mode condition out of the function into the calling code, so that it becomes more explicit. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/598736/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-4-67a0116b5366@linaro.org
2024-06-24drm/msm/dpu: convert vsync source defines to the enumDmitry Baryshkov
Add enum dpu_vsync_source instead of a series of defines. Use this enum to pass vsync information. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/598743/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-2-67a0116b5366@linaro.org
2024-06-23drm/msm/dpu: drop validity checks for clear_pending_flush() ctl opAbhinav Kumar
clear_pending_flush() ctl op is always assigned irrespective of the DPU hardware revision. Hence there is no needed to check whether the op has been assigned before calling it. Drop the checks across the driver for clear_pending_flush() and also update its documentation that it is always expected to be assigned. changes in v2: - instead of adding more validity checks just drop the one for clear_pending_flush - update the documentation for clear_pending_flush() ctl op - update the commit text reflecting these changes changes in v3: - simplify the documentation of clear_pending_flush Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/464fbd84-0d1c-43c3-a40b-31656ac06456@moroto.mountain/T/ Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/600241/ Link: https://lore.kernel.org/r/20240620201731.3694593-1-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-23drm/msm/dpu: Add SM7150 supportDanila Tikhonov
Add definitions for the display hardware used on the Qualcomm SM7150 platform. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/599129/ Link: https://lore.kernel.org/r/20240614215855.82093-3-danila@jiaxyga.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-23drm/msm/dpu: enable compression bit in cfg2 for DSCJun Nie
Enable compression bit in cfg2 register for DSC in the DSI case per hardware version. Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596231/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-3-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-23drm/msm/dpu: adjust data width for widen bus caseJun Nie
data is valid for only half the active window if widebus is enabled Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596229/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-2-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-23drm/msm/dpu: fix video mode DSC for DSIJonathan Marek
Add width change in DPU timing for DSC compression case to work with DSI video mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596227/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-1-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-12Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEADDmitry Baryshkov
Merge drm-misc-next tree into the msm-next tree in order to be able to use HDMI connector framework for the MSM HDMI driver.
2024-06-05drm/msm/dpu: drop duplicate drm formats from wb2_formats arraysJunhao Xie
There are duplicate items in wb2_formats_rgb and wb2_formats_rgb_yuv, which cause weston assertions failed. weston: libweston/drm-formats.c:131: weston_drm_format_array_add_format: Assertion `!weston_drm_format_array_find_format(formats, format)' failed. Signed-off-by: Junhao Xie <bigfoot@classfun.cn> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Fixes: 8c16b988ba2d ("drm/msm/dpu: introduce separate wb2_format arrays for rgb and yuv") Fixes: 53324b99bd7b ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/596847/ Link: https://lore.kernel.org/r/20240524150128.1878297-2-bigfoot@classfun.cn Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-06-05Revert "drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set"Dmitry Baryshkov
In the DPU driver blank IRQ handling is called from a vblank worker and can happen outside of the irq_enable / irq_disable pair. Using the worker makes that completely asynchronous with the rest of the code. Revert commit d13f638c9b88 ("drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set") to fix vblank IRQ assignment for CMD DSI panels. Call trace: dpu_encoder_phys_cmd_control_vblank_irq+0x218/0x294 dpu_encoder_toggle_vblank_for_crtc+0x160/0x194 dpu_crtc_vblank+0xbc/0x228 dpu_kms_enable_vblank+0x18/0x24 vblank_ctrl_worker+0x34/0x6c process_one_work+0x218/0x620 worker_thread+0x1ac/0x37c kthread+0x114/0x118 ret_from_fork+0x10/0x20 Fixes: d13f638c9b88 ("drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/595065/ Link: https://lore.kernel.org/r/20240522-dpu-revert-ams-v2-1-b37825d708e1@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-06-05drm/msm/dpu: fix encoder irq wait skipBarnabás Czémán
The irq_idx is unsigned so it cannot be lower than zero, better to change the condition to check if it is equal with zero. It could not cause any issue because a valid irq index starts from one. Fixes: 5a9d50150c2c ("drm/msm/dpu: shift IRQ indices by 1") Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596853/ Link: https://lore.kernel.org/r/20240509-irq_wait-v2-1-b8b687b22cc4@gmail.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit (git 2.34.1) at 2025-07-19 21:50:39 +0000