summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus
AgeCommit message (Collapse)Author
2022-08-17hwmon: pm_bus: core: Switch to new of thermal APIDaniel Lezcano
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-27-daniel.lezcano@linexp.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-13hwmon: (pmbus/ltc2978) Set voltage resolutionMårten Lindahl
The LTC2977 regulator does not set the regulator_desc .n_voltages value which is needed in order to let the regulator core list the regulator voltage range. This patch defines a regulator_desc with a voltage range, and uses it for defining voltage resolution for regulators LTC2972/LTC2974/LTC2975/ LTC2977/LTC2978/LTC2979/LTC2980/LTM2987 based on that they all have a 16 bit ADC with the same stepwise 122.07uV resolution. It also scales the resolution to a 1mV resolution which is easier to handle. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220614095144.3472305-1-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) Add list_voltage to pmbus opsMårten Lindahl
When checking if a regulator supports a voltage range, the regulator needs to have a list_voltage callback set to the regulator_ops or else -EINVAL will be returned. This support does not exist for the pmbus regulators, so this patch adds pmbus_regulator_list_voltage to the pmbus_regulator_ops. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220614093856.3470672-3-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) Introduce and use cached vout marginsMårten Lindahl
When setting a new voltage the voltage boundaries are read every time to check that the new voltage is within the proper range. Checking these voltage boundaries consists of reading one of PMBUS_MFR_VOUT_MIN/ PMBUS_VOUT_MARGIN_LOW registers and then PMBUS_MFR_VOUT_MAX/ PMBUS_VOUT_MARGIN_HIGH together with writing the PMBUS_CLEAR_FAULTS register. Since these boundaries are never being changed, it can be cached and thus saving unnecessary smbus transmissions. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220614093856.3470672-2-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) fix build error unused-functionRen Zhijie
If CONFIG_PMBUS is y and CONFIG_DEBUG_FS is not set. make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will be failed, like this: drivers/hwmon/pmbus/pmbus_core.c:593:13: error: ‘pmbus_check_block_register’ defined but not used [-Werror=unused-function] static bool pmbus_check_block_register(struct i2c_client *client, int page, ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[3]: *** [drivers/hwmon/pmbus/pmbus_core.o] Error 1 make[2]: *** [drivers/hwmon/pmbus] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [drivers/hwmon] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [drivers] Error 2 To fix building warning, use __maybe_unused to attach this func. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: c3ffc3a1ff83("hwmon: (pmbus) add a function to check the presence of a block register") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220609120448.139907-1-renzhijie2@huawei.com [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) add MFR_* registers to debugfsAdam Wujek
Add registers to debugfs: PMBUS_MFR_ID PMBUS_MFR_MODEL PMBUS_MFR_REVISION PMBUS_MFR_LOCATION PMBUS_MFR_DATE PMBUS_MFR_SERIAL To reduce the number of debugfs entries, only values from page 0 are reported. It is assumed that values of these registers are the same for all pages. Please note that the PMBUS standard allows added registers to be page-specific. Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220601013232.801133-2-dev_public@wujek.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) add a function to check the presence of a block registerAdam Wujek
Other functions (like pmbus_check_byte_register) cannot be used to check the presence of a block register, because it will generate error when PEC is used. Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220601013232.801133-1-dev_public@wujek.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) Add support for Analog Devices LT7182SGuenter Roeck
Add support for Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with Digital Power System Management. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) Add IEEE 754 half precision support to PMBus coreGuenter Roeck
Add support for the IEEE 754 half precision data format as specified in PMBus v1.3.1. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-13hwmon: (pmbus) Move pec attribute to I2C deviceGuenter Roeck
Enabling and disabling PEC for PMBus devices is currently only supported with a debugfs attribute, which requires debugfs to be enabled and is thus less than perfect. Take the lm90 driver as example and add a 'pec' attribute to the I2C device if both the I2C adapter and the PMBus device support it. Remove the now obsolete 'pec' attribute from debugfs. Cc: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-06-29hwmon: (pmbus/ucd9200) fix typos in commentsJiang Jian
Drop the redundant word 'the' in the comments following /* * Set PHASE registers on all pages to 0xff to ensure that phase * specific commands will apply to all phases of a given page (rail). * This only affects the READ_IOUT and READ_TEMPERATURE2 registers. * READ_IOUT will return the sum of currents of all phases of a rail, * and READ_TEMPERATURE2 will return the maximum temperature detected * for the [the - DROP] phases of the rail. */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622063231.20612-1-jiangjian@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Check PEC support before reading other registersAdam Wujek
Make sure that the support of PEC is determined before the read of other registers. Otherwise the validation of PEC can trigger an error on the read of STATUS_BYTE or STATUS_WORD registers. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without the move of the code, at the second load of the driver (or bind) the STATUS_BYTE or STATUS_WORD register is always read with PEC enabled, which is likely to cause a read error resulting with fail of a driver load (or bind). Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220519233334.438621-1-dev_public@wujek.eu Fixes: 75d2b2b06bd84 ("hwmon: (pmbus) disable PEC if not enabled") Fixes: 4e5418f787ec5 ("hwmon: (pmbus_core) Check adapter PEC support") [groeck: Added Fixes: tags, dropped continuation line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Add get_voltage/set_voltage opsMårten Lindahl
The pmbus core does not have operations for getting or setting voltage. Add functions get/set voltage for the dynamic regulator framework. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220503104631.3515715-5-marten.lindahl@axis.com [groeck: cosmetic alignment / empty line fixes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Register with thermal for PSC_TEMPERATUREEduardo Valentin
Some pmbus device drivers have device tree support and may want to use of-thermal to register a thermal zone OF sensor for those device drivers. This way we allow describing device tree thermal zones for pmbus device drivers with device tree support. This patch achieves this by registering pmbus sensors with thermal subsystem if they are PSC_TEMPERATURE and are providing _input hwmon interface. Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:PMBUS HARDWARE MONITORING DRIVERS) Cc: Jean Delvare <jdelvare@suse.com> (maintainer:HARDWARE MONITORING) Cc: linux-hwmon@vger.kernel.org (open list:PMBUS HARDWARE MONITORING DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Eduardo Valentin <evalenti@kernel.org> Link: https://lore.kernel.org/r/20220428174926.2150-1-eduval@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Add support for Infineon Digital Multi-phase xdp152 family ↵Greg.Schwendimann@infineon.com
controllers Add support for devices XDPE152C4, XDPE12584. Signed-off-by: Greg Schwendimann <Greg.Schwendimann@infineon.com> Link: https://lore.kernel.org/r/5e6d50e9b28140158f339b0de343eea4@infineon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus/ltc2978) Add chip specific write_byte_dataMårten Lindahl
Several of the manuals for devices supported by this driver describes the need for a minimum wait time before the chip is ready to receive next command. This wait time is already implemented in the driver as a ltc_wait_ready function with a driver defined wait time of 100 ms, and is considered for specific devices before reading/writing data on the pmbus. Since this driver uses the default pmbus_regulator_ops for the enable/ disable/is_enabled functions we should add a driver specific callback for write_byte_data to prevent bypassing the wait time recommendations for the following devices: ltc3880/ltc3882/ltc3883/ltc3884/ltc3886/ ltc3887/ltc3889/ltm4664/ltm4675/ltm4676/ltm4677/ltm4678/ltm4680/ltm4686/ ltm4700/ltc7880. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-4-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus) Use _pmbus_read_byte_data with callbackMårten Lindahl
Some of the pmbus core functions uses pmbus_read_byte_data, which does not support driver callbacks for chip specific write operations. This could potentially influence some specific regulator chips that for example need a time delay before each data access. Lets use _pmbus_read_byte_data with callback check. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-3-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus) Introduce and use write_byte_data callbackMårten Lindahl
Some of the pmbus core functions uses pmbus_write_byte_data, which does not support driver callbacks for chip specific write operations. This could potentially influence some specific regulator chips that for example need a time delay before each data access. Lets add support for driver callback with _pmbus_write_byte_data. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-2-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus/max16601) Add MAX16602 supportAtif Ofluoglu
Adding another MAX16602 chip support to MAX16601 driver Tested with MAX16602 works as expected. Signed-off-by: Atif Ofluoglu <atif.ofluoglu@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-27hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirkZev Weiss
CLEAR_FAULTS commands can apparently sometimes trigger catastrophic power output glitches on the ahe-50dc, so block them from being sent at all. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220427035109.3819-1-zev@bewilderbeest.net Fixes: d387d88ed045 ("hwmon: (pmbus) Add Delta AHE-50DC fan control module driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-25hwmon: (pmbus) disable PEC if not enabledAdam Wujek
Explicitly disable PEC when the client does not support it. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without a new code, at the second load of the driver (or bind) the "flags" variable is not updated to avoid PEC usage. As a consequence the further communication with the device is done with the PEC enabled, which is wrong and may fail. The implementation first disable the I2C_CLIENT_PEC flag, then the old code enable it if needed. Fixes: 4e5418f787ec ("hwmon: (pmbus_core) Check adapter PEC support") Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220420145059.431061-1-dev_public@wujek.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-04hwmon: (xdpe12284) Fix build warning seen if ↵Guenter Roeck
CONFIG_SENSORS_XDPE122_REGULATOR is disabled 0-day reports: drivers/hwmon/pmbus/xdpe12284.c:127:36: warning: unused variable 'xdpe122_reg_desc' This is seen if CONFIG_SENSORS_XDPE122_REGULATOR is not enabled. Mark xdpe122_reg_desc as __maybe_unused to fix the problem. Fixes: f53bfe4d6984 ("hwmon: (xdpe12284) Add regulator support") Reported-by: kernel test robot <lkp@intel.com> Cc: Marcello Sylvester Bauer <sylv@sylv.io> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-17hwmon: (pmbus) Add Vin unit off handlingBrandon Wyman
If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (adm1275) Allow setting sample averagingPotin Lai
Current driver assume PWR_AVG and VI_AVG as 1 by default, and user needs to set sample averaging via sysfs manually. This patch parses the properties "adi,power-sample-average" and "adi,volt-curr-sample-average" from device tree, and setting sample averaging during probe. Input value must be one of value in the list [1, 2, 4, 8, 16, 32, 64, 128]. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Link: https://lore.kernel.org/r/20220302123817.27025-2-potin.lai@quantatw.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (xdpe12284) Add regulator supportMarcello Sylvester Bauer
Add simple on/off regulator support for xdpe12284 and other pmbus parts supported by the xdpe12284 driver. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/f69b8e7fa32cd2bad9516d8fa590abb87c7e4869.1646214248.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (xdpe12284) Add support for xdpe11280Marcello Sylvester Bauer
Add support for another Infineon Multi-phase controller chip. The xdpe11280 uses linear instead of vid data format for VOUT. Detect VOUT_MODE format during identification and skip the xdpe122 related adaptions in case it is linear. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/fa6a4b636a05ecb337d132824efca2545188a2a2.1646214248.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus/pli1209bc) Add regulator supportMarcello Sylvester Bauer
Add regulator support for PLI1209BC Digital Supervisor. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/21b0cdb6dd72654effa451d3b1636ecd07b160e9.1645435888.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus) Add support for pli1209bcMarcello Sylvester Bauer
PLI1209BC is a Digital Supervisor from Vicor Corporation. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/4e016e66275bc46c90974aec18b150c874e64787.1645435888.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus) Add regulator supply into macroMarcello Sylvester Bauer
Add regulator supply into PWBUS_REGULATOR macro. This makes it optional to define a vin-supply in DT. Not defining a supply will add a dummy regulator supply instead and only cause the following debug output: ``` Looking up vin-supply property in node [...] failed ``` Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/58f2ff7b90233fad3d7ae2e9d66d5192e2c1ac01.1645437439.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus/lm25066) Add regulator supportZev Weiss
While these chips aren't strictly advertised as voltage regulators per se, they (aside from the lm25056) support the PMBus OPERATION command to enable and disable their outputs and have status bits for reporting various warnings and faults, and can hence usefully support all the pmbus_regulator_ops operations. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220219000742.20126-1-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus) Add get_error_flags support to regulator opsZev Weiss
The various PMBus status bits don't all map perfectly to the more limited set of REGULATOR_ERROR_* flags, but there's a reasonable number where they correspond well enough. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220219000359.19985-1-zev@bewilderbeest.net [groeck: Added missing locking] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus) Remove trailing whitespaces from Kconfig fileMarcello Sylvester Bauer
Fix checkpatch issues by removing trailing whitespaces in Kconfig. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/c984b88b136a1cde16ce52c5f818886653b0f84a.1642434222.git.sylv@sylv.io [groeck: Updated subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27hwmon: (pmbus) Add mutex to regulator opsPatrick Rudolph
On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-22hwmon: (pmbus) Clear pmbus fault/warning bits after readVikash Chandola
Almost all fault/warning bits in pmbus status registers remain set even after fault/warning condition are removed. As per pmbus specification these faults must be cleared by user. Modify hwmon behavior to clear fault/warning bit after fetching data if fault/warning bit was set. This allows to get fresh data in next read. Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com> Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-01-23hwmon: (pmbus/ir38064) Mark ir38064_of_match as __maybe_unusedGuenter Roeck
If CONFIG_PM is not enabled, the following warning is reported. drivers/hwmon/pmbus/ir38064.c:54:34: warning: unused variable 'ir38064_of_match' Mark it as __maybe_unused. Reported-by: kernel test robot <lkp@intel.com> Cc: Arthur Heymans <arthur.heymans@9elements.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"Colin Ian King
There is a spelling mistake in the module description, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211220155527.179125-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Expose a regulatorPatrick Rudolph
The chip series supported by this driver are voltage regulators, so expose them to the regulator subsystem. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-4-arthur.heymans@9elements.com [groeck: Added brief patch description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Add of_match_tableArthur Heymans
Add the missing of_match_table to allow device tree probing. Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-3-arthur.heymans@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263Patrick Rudolph
The IR38060, IR38164 and IR38263 can be supported using this driver. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com> Link: https://lore.kernel.org/r/20211213142814.264802-2-arthur.heymans@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add support for MPS Multi-phase mp5023Howard.Chiu@quantatw.com
Add support for mp5023 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a Hot-Swap Controller. Signed-off-by: Howard Chiu <howard.chiu@quantatw.com> Link: https://lore.kernel.org/r/HKAPR04MB400349AA406694FB976D78D096709@HKAPR04MB4003.apcprd04.prod.outlook.com [groeck: Added MODULE_IMPORT_NS, entry in index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add Delta AHE-50DC fan control module driverZev Weiss
This device is an integrated module of the Delta AHE-50DC Open19 power shelf. I haven't been able to procure any proper documentation for it, but it seems to be a (somewhat minimally) PMBus-compliant device. It provides four fan speeds, four temperatures (three standard and one manufacturer-specific via a virtual second page), and a vin reading. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/ibm-cffps) Use MFR_ID to choose versionBrandon Wyman
There are multiple power supplies that will indicate CFFPS_CCIN_VERSION_1, use the manufacturer ID to determine if it should be treated as version cffps1 or version cffps2. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20211004144339.2634330-2-bjwyman@gmail.com [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/ibm-cffps) Add mfg_id debugfs entryBrandon Wyman
Add support for the manufacturer ID to the debugfs entries. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20211004144339.2634330-1-bjwyman@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Support configurable sense resistor valuesZev Weiss
The appropriate mantissa values for the lm25066 family's direct-format current and power readings are a function of the sense resistor employed between the SENSE and VIN pins of the chip. Instead of assuming that resistance is always the same 1mOhm as used in the datasheet, allow it to be configured via a device-tree property ("shunt-resistor-micro-ohms"). Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-8-zev@bewilderbeest.net [groeck: Fixed checkpatch warnings] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Add OF device ID tableZev Weiss
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-7-zev@bewilderbeest.net [groeck: Replaced reference to reasoning with reasoning, fixed checkpatch warnings, fixed compile warning comparing of_id->data w/ i2c_id->driver_data] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Mark lm25066_coeff array constZev Weiss
lm25066_coeff is read-only. Mark it as such. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-6-zev@bewilderbeest.net [groeck: Added description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeffZev Weiss
Maintaining this manually is error prone (there are currently only five chips supported, not six); gcc can do it for us automatically. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: 666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063") Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Avoid forward declaration of lm25066_idZev Weiss
Reordering things to put the table before the probe function eliminates the need for it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-4-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Adjust lm25066 PSC_CURRENT_IN_L mantissaZev Weiss
At least as of Revision J, the datasheet has a slightly different value than what we'd had in the driver. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-3-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-12hwmon: (pmbus/lm25066) Add offset coefficientsZev Weiss
With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-07-18 12:00:22 +0000