summaryrefslogtreecommitdiff
path: root/drivers/i3c/master
AgeCommit message (Collapse)Author
2023-09-25i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times outJarkko Nikula
Ring Abort request will timeout in case there is an error in the Host Controller interrupt delivery or Ring Header configuration. Using BUG() makes hard to debug those cases. Make it less severe and turn BUG() to WARN_ON(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230921055704.1087277-6-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handlerJarkko Nikula
Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: mipi-i3c-hci: Fix DAT/DCT entry sizesJarkko Nikula
MIPI I3C HCI specification v1.1 describes the ENTRY_SIZE field for the Device Address Table (DAT) and the Device Characteristics Table (DCT) section offset registers (DAT_SECTION_OFFSET and DCT_SECTION_OFFSET). That field is not documented in earlier version. ENTRY_SIZE value 0 is meant to be backward compatible. For the DAT entry size it is interpreted as 2 DWORDs (8-bytes) and for the DCT entry size as 4 DWORDs (16-bytes). Values 1-15 are reserved for future use. New version I believe fixes also the TABLE_SIZE field description. Before it was defined in DWORDs which I believe is incorrect since the DAT/DCT table entry structures, and sizes, are described having 8-bytes/16-bytes entries. This is more clear in the specification v1.1 which states the TABLE_SIZE fields are interpreted as number of entries in the DAT/DCT tables. I believe this same holds also in earlier version, at least it makes more sense. Fix code accordingly and let the DAT_entry_size and the DCT_entry_size variables carry the size as bytes. Which is how it is already interpreted in the dat_v1.c: hci_dat_v1_init(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230921055704.1087277-4-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: mipi-i3c-hci: Add MODULE_ALIASJarkko Nikula
Add MODULE_ALIAS() in order to be able to autoload this driver when the device is added as a platform device from another glue code driver. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230921055704.1087277-3-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: svc: Annotate struct svc_i3c_xfer with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct svc_i3c_xfer. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Conor Culhane <conor.culhane@silvaco.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-i3c@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230922175023.work.239-kees@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c/master/mipi-i3c-hci: Annotate struct hci_rings_data with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct hci_rings_data. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Nicolas Pitre <npitre@baylibre.com> Cc: Len Baker <len.baker@gmx.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: linux-i3c@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922175019.work.129-kees@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: master: cdns: Annotate struct cdns_i3c_xfer with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct cdns_i3c_xfer. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: "Przemysław Gaj" <pgaj@cadence.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-i3c@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922175014.work.637-kees@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: dw: Annotate struct dw_i3c_xfer with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct dw_i3c_xfer. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-i3c@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230922175011.work.800-kees@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-25i3c: master: cdns: Fix reading status registerJoshua Yeong
IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1. Cc: stable@vger.kernel.org Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06i3c: master: svc: fix probe failure when no i3c device existFrank Li
I3C masters are expected to support hot-join. This means at initialization time we might not yet discover any device and this should not be treated as a fatal error. During the DAA procedure which happens at probe time, if no device has joined, all CCC will be NACKed (from a bus perspective). This leads to an early return with an error code which fails the probe of the master. Let's avoid this by just telling the core through an I3C_ERROR_M2 return command code that no device was discovered, which is a valid situation. This way the master will no longer bail out and fail to probe for a wrong reason. Cc: stable@vger.kernel.org Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-08-28i3c: master: svc: Describe member 'saved_regs'Miquel Raynal
The 'saved_regs' member of the 'svc_i3c_master' structure is not described in the kernel doc, which produces the following warning: Function parameter or member 'saved_regs' not described in 'svc_i3c_master' Add the missing line in the kernel documentation of the parent structure. Fixes: 1c5ee2a77b1b ("i3c: master: svc: fix i3c suspend/resume issue") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308171435.0xQ82lvu-lkp@intel.com/ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230817101853.16805-1-miquel.raynal@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-08-10i3c: master: svc: Do not check for 0 return after calling platform_get_irq()Ruan Jinjie
It is not possible for platform_get_irq() to return 0. Use the return value from platform_get_irq(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230803085149.149248-1-ruanjinjie@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-08-10i3c/master: cmd_v1: Fix the exit criteria for the daa procedureBilly Tsai
The exit criteria for the DAA should check if the data length is equal to 1, instead of checking if the response status is equal to 1. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20230802100909.2568215-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-27i3c: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230714174623.4057784-1-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-06-05i3c: master: svc: add NACK check after start byte sentClark Wang
Add NACK check after start byte is sent. It is possible to detect early that a device is not on the bus and avoid invalid transmissions thereafter. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-06-05i3c: master: svc: fix cpu schedule in spin lockClark Wang
pm_runtime_resume_and_get() may call sleep(). It cannot be used in svc_i3c_master_start_xfer_locked(), because it is in a spin lock. Move the pm runtime operations to svc_i3c_master_enqueue_xfer(). Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Fixes: 05be23ef78f7 ("i3c: master: svc: add runtime pm support") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-2-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-06-05i3c: master: svc: fix i3c suspend/resume issueClark Wang
When system suspends, if i3c module is powered down, register value will lose. Need to save the key registers before system suspend. So save these registers value in runtime pm suspend, and restore them if these register's value is different with the saved values when runtime pm resume. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-1-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-30i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to staticTom Rix
smatch reports drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol 'ast2600_i3c_ops' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: ast2600: fix register setting for 545 ohm pullupsJeremy Kerr
The 2k register setting is zero, OR-ing it in doesn't parallel the 2k and 750 ohm pullups. We need a separate value for the 545 ohm setting. Reported-by: Lukwinski Zbigniew <zbigniew.lukwinski@linux.intel.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230428001849.1775559-1-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: ast2600: enable IBI supportJeremy Kerr
The ast2600 i3c hardware is capable of IBIs, but we need a workaround for a hardware issue with the I3C state machine handling IBI payloads of specific lengths when PEC is not enabled. To avoid this, we need to unconditionally enable PECs, at the consquence of losing a byte of data when the device does not send a PEC. Enable IBIs on the ast2600 platform, including an implementation of the PEC workaround, which prints a warning when triggered. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/ba923b96d6d129024c975e8a0472c5b2fcb3af32.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: dw: Add a platform facility for IBI PEC workaroundsJeremy Kerr
On the AST2600 i3c controller, we'll need to apply a workaround for a hardware issue with IBI payloads. Introduce a platform hook to allow dw i3c platform implementations to modify the DAT entry in IBI enable/disable to allow this workaround in a future change. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/d5d76a8d2336d2a71886537f42e71d51db184df6.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: dw: Add support for in-band interruptsJeremy Kerr
This change adds support for receiving and dequeueing i3c IBIs. By setting struct dw_i3c_master->ibi_capable before probe, a platform implementation can select the IBI-enabled version of the i3c_master_ops, enabling the global IBI infrastrcture for that controller. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/79daeefd7ccb7c935d0c159149df21a6c9a73ffa.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: dw: Turn DAT array entry into a structJeremy Kerr
In an upcoming change, we will want to store additional data about the devices we have in the data address table. Change the type of the DAT entries into a struct, which currently just has the address data. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/9dc0d9e2857e851a0cf04819df48e5d31921f83e.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: dw: Create a generic fifo read functionJeremy Kerr
In a future change we'll want to read from the IBI FIFO too, so turn dw_i3c_read_rx_fifo() into a generic read with the FIFO register as a parameter. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/827204789583dd86addffb47ecaeab9d67cf95d5.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: ast2600: Add AST2600 platform-specific driverJeremy Kerr
Now that we have platform-specific infrastructure for the dw i3c driver, add platform support for the ASPEED AST2600 SoC. The AST2600 has a small set of "i3c global" registers, providing platform-level i3c configuration outside of the i3c core. For the ast2600, we need a couple of extra setup operations: - on probe: find the i3c global register set and parse the SDA pullup resistor values - on init: set the pullups accordingly, and set the i3c instance IDs Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230331091501.3800299-4-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-28i3c: dw: Add infrastructure for platform-specific implementationsJeremy Kerr
The dw i3c core can be integrated into various SoC devices. Platforms that use this core may need a little configuration that is specific to that platform. Add some infrastructure to allow platform-specific behaviour: common probe/remove functions, a set of platform hook operations, and a pointer for platform-specific data in struct dw_i3c_master. Move the common api into a new (i3c local) header file. Platforms will provide their own struct platform_driver, which allocates struct dw_i3c_master, does any platform-specific probe behaviour, and calls into the common probe. A future change will add new platform support that uses this infrastructure. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230331091501.3800299-2-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-27i3c: dw: use bus mode rather than device reg for conditional tCAS settingJeremy Kerr
In the clock setup path, we set the hardware DEV_CTRL_I2C_SLAVE_PRESENT bit on a shared mode bus, then read-back this bit for the conditional tCAS set. Instead, just use the bus->mode setting for the conditional test. While we're at it, add a little comment about why the conditional is there. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/92a933566f7846708a00ad7f5a16ee8e6ed32d0e.1680156630.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-04-27i3c: dw: Return the length from a read priv_xferMatt Johnston
We currently assume that the rx_len of a read command will be as submitted, but we may have a shorter read than expected. This change populates the output i3c xfer length from the actually-read length. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/f4fff7ab18dee1f662dc7a5a4111fcd921e6792b.1680156630.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-21i3c: svc: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230318233311.265186-6-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-21i3c: mipi-i3c-hci: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-5-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-21i3c: cdns: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-4-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-21i3c: dw: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-3-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-21i3c: Make i3c_master_unregister() return voidUwe Kleine-König
The function returned zero unconditionally. Switch the return type to void and simplify the callers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230318233311.265186-2-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-13i3c: dw: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/i3c/master/dw-i3c-master.c:1201:34: error: ‘dw_i3c_master_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312132535.352246-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-28i3c: master: dw: stop hardcoding initial speedJack Chen
Bus-speed could be default(12.5MHz) or defined by users in dts. Dw-i3c-master should not hard-code the initial speed to be I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz) And because of Synopsys's I3C controller limit (hcnt/lcnt register length) and core-clk provided, there is a limit to bus speed, too. For example, when core-clk is 250 MHz, the bus speed cannot be lowered below 1MHz. Tested: tested with an i3c sensor and captured with a logic analyzer. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-05-17i3c: master: svc: fix returnvar.cocci warningGuo Zhengkui
Fix the following coccicheck warning: drivers/i3c/master/svc-i3c-master.c:1600:5-8: Unneeded variable: "ret". Return "0" on line 1605. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220504164901.9622-1-guozhengkui@vivo.com
2022-05-17i3c/master: simplify the return expression of i3c_hci_remove()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220505021954.54524-1-chi.minghao@zte.com.cn
2022-01-13i3c: master: dw: check return of dw_i3c_master_get_free_pos()Tom Rix
Clang static analysis reports this problem dw-i3c-master.c:799:9: warning: The result of the left shift is undefined because the left operand is negative COMMAND_PORT_DEV_INDEX(pos) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ pos can be negative because dw_i3c_master_get_free_pos() can return an error. So check for an error. Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com
2022-01-05i3c: master: mipi-i3c-hci: correct the config reference for endiannessLukas Bulwahn
The referred config BIG_ENDIAN does not exist. The config for the endianness of the CPU architecture is called CPU_BIG_ENDIAN. Correct the config name to the existing config for the endianness. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com
2022-01-05i3c: master: svc: enable the interrupt in the enable ibi functionClark Wang
If enable interrupt in the svc_i3c_master_bus_init() but do not call enable ibi in the device driver, it will cause a kernel dump in the svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus, because the data->ibi_pool is not initialized. So only enable the interrupt in svc_i3c_master_enable_ibi() function. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: add the missing module device tableClark Wang
The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot be auto probed when it is built in moudle. So add it. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: add runtime pm supportClark Wang
Add runtime pm support to dynamically manage the clock. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: set ODSTOP to let I2C device see the STOP signalClark Wang
If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C devices cannot see the stop signal. It may cause message sending errors. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: add support for slave to stop returning dataClark Wang
When i3c controller reads data from slave device, slave device can stop returning data with an ACK after any byte. Add this support for svc i3c controller. Otherwise, it will timeout when the slave device ends the read operation early. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: separate err, fifo and disable interrupt of reset functionClark Wang
Sometimes only need to reset err and fifo regs, so split the origin reset function to three functions. Put them at the top of the file, to let more functions can call them. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-4-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: fix atomic issueClark Wang
do_daa_locked() function is in a spin lock environment, use readl_poll_timeout_atomic() to replace the origin readl_poll_timeout(). Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-3-xiaoning.wang@nxp.com
2022-01-05i3c: master: svc: move module reset behind clk enableClark Wang
Reset I3C module will R/W its regs, so enable its clocks first. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-2-xiaoning.wang@nxp.com
2021-12-10i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in ↵Christophe JAILLET
'hci_dat_v1_get_index()' The code in 'hci_dat_v1_get_index()' really looks like a hand coded version of 'for_each_set_bit()', except that a +1 is missing when searching for the next set bit. This really looks odd and it seems that it will loop until 'dat_w0_read()' returns the expected result. So use 'for_each_set_bit()' instead. It is less verbose and should be more correct. Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/0cdf3cb10293ead1acd271fdb8a70369c298c082.1637186628.git.christophe.jaillet@wanadoo.fr
2021-12-10i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210912155135.7541-1-len.baker@gmx.com
2021-12-10i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210905144054.5124-1-len.baker@gmx.com
generated by cgit (git 2.34.1) at 2025-07-18 09:10:21 +0000