summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2023-04-02Input: edt-ft5x06 - don't print error messages with dev_dbg()Dario Binacchi
In some parts of the code, error messages were improperly printed with dev_dbg() calls. In those cases, dev_dbg() has been replaced with dev_err(). Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-7-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - remove code duplicationDario Binacchi
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code duplication without impacting the application load, and reduces the chances of errors or mistakes. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - don't recalculate the CRCDario Binacchi
There is no need to recalculate the CRC when the data has not changed. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-5-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - add spaces to ensure format specificationDario Binacchi
It adds spaces around '-' as recommended by the Linux coding style. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-4-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - remove unnecessary blank linesDario Binacchi
It removes unnecessary blank lines so that checkpatch doesn't complain anymore. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-3-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - fix indentationDario Binacchi
Matches the alignment to the open parenthesis as suggested by checkpatch. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-2-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: tsc2007 - enable cansleep pendown GPIOBenjamin Bara
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read during the hard IRQ anymore. This might be the case if the GPIO chip is an expander behind i2c. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: add a new Novatek NVT-ts driverHans de Goede
Add a new driver for the Novatek i2c touchscreen controller as found on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen controller model-number is unknown. Even with the tablet opened up it is impossible to read the model-number. Android calls this a "NVT-ts" touchscreen, but that may apply to other Novatek controller models too. This appears to be the same controller as the one supported by https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c but unfortunately that does not give us a model-number either. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Merge tag 'input-for-v6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fixes to ALPS and Focaltech PS/2 drivers dealing with the breakage of switching to -funsigned-char - quirks to i8042 to better handle Lifebook A574/H and TUXEDO devices - a quirk to Goodix touchscreen driver to handle Yoga Book X90F - a fix for incorrectly merged patch to xpad game controller driver * tag 'input-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix Input: alps - fix compatibility with -funsigned-char Input: focaltech - use explicitly signed char type Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTON Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table Input: i8042 - add quirk for Fujitsu Lifebook A574/H
2023-03-17Input: bcm_iproc_tsc - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-4-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: sun4i-ts - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: zinitix - use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542682-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Merge tag 'v6.3-rc2' into nextDmitry Torokhov
Merge with mainline to get of_property_present() and other newer APIs.
2023-03-17Input: hideep - optionally reset controller work mode to native HiDeep protocolHans de Goede
The HiDeep IST940E touchscreen controller used on the Lenovo Yoga Book X90F convertible comes up in HID mode by default. This works well on the X91F Windows model where the touchscreen is correctly described in ACPI and ACPI takes care of controlling the reset GPIO and regulators. But the X90F ships with Android and the ACPI tables on this model don't describe the touchscreen. Instead this is hardcoded in the vendor kernel. The vendor kernel uses the touchscreen in native HiDeep 20 (2.0?) protocol mode and switches the controller to this mode by writing 0 to reg 0x081e. Adjusting the i2c-hid code to deal with the reset-gpio and regulators on this non devicetree (but rather broken ACPI) convertible is somewhat tricky and the native protocol reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR which are not reported in HID mode, so it is preferable to use the native mode. Add support to the hideep driver to reset the work-mode to the native HiDeep protocol to allow using it on the Lenovo Yoga Book X90F. This is guarded behind a new "hideep,force-native-protocol" boolean property, to avoid changing behavior on other devices. For the record: I did test using the i2c-hid driver with some quick hacks and it does work. The I2C-HID descriptor is available from address 0x0020, just like on the X91F Windows model. So far the new "hideep,force-native-protocol" property is only used on x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: hideep - silence error in SW_RESET()Hans de Goede
On some models the first HIDEEP_SYSCON_WDT_CON write alone is enough to cause the controller to reset, causing the second write to fail: i2c-hideep_ts: write to register 0x52000014 (0x000001) failed: -121 Switch this write to a raw hideep_pgm_w_mem() to avoid an error getting logged in this case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: hideep - clean up some inconsistent indentingYang Li
Turn the space into a tab to Eliminate the follow smatch warning: drivers/input/touchscreen/hideep.c:470 hideep_program_nvm() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220429070103.4747-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI tableHans de Goede
The Android Lenovo Yoga Book X90F / X90L uses the same goodix touchscreen with 9 bytes touch reports for its touch keyboard as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to the nine_bytes_report DMI table. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20230315134442.71787-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-06gpiolib: remove gpio_set_debounce()Arnd Bergmann
gpio_set_debounce() only has a single user, which is trivially converted to gpiod_set_debounce(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in remaining driversDaniel Lezcano
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-25Merge tag 'input-for-v6.3-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ...
2023-02-03Input: cyttsp5 - fix bitmask for touch buttonsRichard Kjerstadius
Prior to this patch, the bitmask ends up being 0x3, as opposed to 0x1 which likely was the intention. The erroneous bit results in the driver reporting 2 different button activations in designs with 2 or more buttons. To detect which button has been pressed, cyttsp5_btn_attention() uses a for loop to iterate through the input buffer, while shifting and applying a bitmask to determine the state for each button. Unfortunately, when the bitmask is 0x3 and there are multiple buttons, this procedure falls apart. Consider a design with 3 buttons. Pressing the third button will result in a call to cyttsp5_btn_attention() with the input buffer containing 0x4 (binary 0100). In the first iteration of the for loop cur_btn_state will be: (0x4 >> 0 * 1) & 0x3 = 0x4 & 0x3 = 0x0 This is correct. However, in the next iteration this happens: (0x4 >> 1 * 1) & 0x3 = 0x2 & 0x3 = 0x2 Which means that a key event for key 1 is generated, even though it's not really active. In the third iteration, the loop detects the button that was actually pressed: (0x4 >> 2 * 1) & 0x3 = 0x1 & 0x3 = 0x1 This key event is the only one that should have been detected, but it is accompanied by the preceding key. Ensuring the applied mask is 0x1 solves this problem. Signed-off-by: Richard Kjerstadius <richard.kjerstadius@teledyne.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20230127102903.3317089-1-richard.kjerstadius@teledyne.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-02-03Input: exc3000 - properly stop timer on shutdownDmitry Torokhov
We need to stop the timer on driver unbind or probe failures, otherwise we get UAF/Oops. Fixes: 7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver") Reported-by: "Stahl, Michael" <mstahl@moba.de> Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-02-01mfd: remove ucb1400 supportArnd Bergmann
The ucb1400 MFD driver and its gpio and touchscreen child drivers were only used on a few PXA machines that were unused for a while and are now removed. Removing these leaves the AC97 support as ALSA specific, no other drivers are now connected through this interface. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Lee Jones <lee@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Marek Vasut <marex@denx.de> Cc: linux-kernel@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-01input: remove zylonite touchscreen driverArnd Bergmann
The PXA zylonite platform was removed, so this driver has no remaining users. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-input@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-29Input: edt-ft5x06 - fix typo in a commentDario Binacchi
Replace 'firmares' with 'firmwares'. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230128162325.64467-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-29Input: ads7846 - don't check penirq immediately for 7845Luca Ellero
To discard false readings, one should use "ti,penirq-recheck-delay-usecs". Checking get_pendown_state() at the beginning, most of the time fails causing malfunctioning. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-29Input: ads7846 - always set last command to PWRDOWNLuca Ellero
Controllers that report pressure (e.g. ADS7846) use 5 commands and the correct sequence is READ_X, READ_Y, READ_Z1, READ_Z2, PWRDOWN. Controllers that don't report pressure (e.g. ADS7845/ADS7843) use only 3 commands and the correct sequence should be READ_X, READ_Y, PWRDOWN. But the sequence sent was incorrect: READ_X, READ_Y, READ_Z1. Fix this by setting the third (and last) command to PWRDOWN. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-3-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-29Input: ads7846 - don't report pressure for ads7845Luca Ellero
ADS7845 doesn't support pressure. Avoid the following error reported by libinput-list-devices: "ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE". Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: ipaq-micro-ts - fix DEFINE_SIMPLE_DEV_PM_OPS typoArnd Bergmann
The previous change was not properly build tested and needs a trivial spelling change: ipaq-micro-ts.c:146:8: error: type defaults to 'int' in declaration of 'DEFINE_SIMPLE_DEV_PM' [-Werror=implicit-int] Fixes: 144ff5e03d74 ("Input: ipaq-micro-ts - use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230117164539.1631336-1-arnd@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: cyttsp - use EXPORT_GPL_SIMPLE_DEV_PM_OPS()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and EXPORT_GPL_SIMPLE_DEV_PMU_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. It also rolls in the EXPORT_SYMBOL() so that we only export it if CONFIG_PM_SLEEP. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230114171620.42891-12-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: cyttsp4 - use EXPORT_GPL_RUNTIME_DEV_PM_OPS()Jonathan Cameron
SET_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS() are deprecated as they requires explicit protection against unused function warnings. The new combination of pm_ptr() EXPORT_GPL_RUNTIME_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the #ifdef guards. Note that we are replacing an unconditional call to the suspend and resume functions for sleep use cases with one via pm_runtime_force_suspend() / pm_runtime_force_resume() that only do anything to the device if we are not already in the appropriate runtime suspended state. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- I 'think' this should be fine in that it can only reduce the number of unnecessary suspends. If anyone can test that would be great. Link: https://lore.kernel.org/r/20230114171620.42891-11-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: tsc200x - use EXPORT_GPL_SIMPLE_DEV_PM_OPS()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and EXPORT_GPL_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. This function also removes the need for separate EXPORT_SYMBOL_GPL() Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230114171620.42891-10-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: stmfts - switch to SYSTEM_SLEEP_/RUNTIME_PM_OPS() and pm_ptr()Jonathan Cameron
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated as they require explicit protection against unused function warnings. The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/ RUNTIME_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20230114171620.42891-7-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: s6sy761 - switch to SYSTEM_SLEEP_/RUNTIME_PM_OPS() and pm_ptr()Jonathan Cameron
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated as they require explicit protection against unused function warnings. The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/ RUNTIME_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Caleb Connolly <caleb@connolly.tech> Cc: Andi Shyti <andi@etezian.org> Tested-by: Caleb Connolly <caleb@connolly.tech> # oneplus-guacamole Link: https://lore.kernel.org/r/20230114171620.42891-5-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-20ARM: pxa: remove unused board filesArnd Bergmann
The majority of all pxa board files has not been touched in a long time, and no users have spoken up in favor of keeping them around. This leaves only support for the platforms that were already converted to DT, as well as the gumstix and spitz/akita/borzoi machines that work in qemu and can still be converted to DT later. Cc: Ales Bardorfer <ales@i-tech.si> Cc: Ales Snuparek <snuparek@atlas.cz> Cc: Alex Osborne <ato@meshy.org> Cc: Alex Osborne <bobofdoom@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Ian Molton <spyro@f2s.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Michael Petchkovsky <mkpetch@internode.on.net> Cc: Nick Bane <nick@cecomputing.co.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Tomas Cech <sleep_walker@suse.cz> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16input: remove s3c24xx touchscreen driverArnd Bergmann
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09Merge tag 'v6.2-rc3' into nextDmitry Torokhov
Merge with mainline to bring in timer_shutdown_sync() API.
2023-01-09Input: ipaq-micro-ts - use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
This driver never used the older SIMPLE_DEV_PM_OPS() but instead just set two of the callbacks directly. Skip that deprecated macro and go straight to the new form that avoids the need for guarding or marking callbacks __maybe_unused. -- It is possible there is some subtle reason why only two of the callbacks normally set by SIMPLE_DEV_PM_OPS() are set. As such, this one needs some closer reading than many of the others. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-70-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: zinitix - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-69-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: zforce_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-68-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: wm97xx - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-67-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: wdt87xx_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-66-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: wacom_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alistair Francis <alistair@alistair23.me> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-65-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: ucb1400_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-64-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: ti_am335x_tsc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Dario Binacchi <dariobin@libero.it> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-63-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: surface3_spi - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Stephen Just <stephenjust@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-62-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: st1232 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: John Keeping <john@metanate.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-61-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: silead - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-60-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: raydium_i2c_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-59-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-09Input: pixcir_i2c_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Fabio Estevam <festevam@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-58-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-07-18 16:46:30 +0000