summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2021-10-16Input: ili210x - use resolution from ili251x firmwareMarek Vasut
The ili251x firmware protocol permits readout of panel resolution, implement this, but make it possible to override this value using DT bindings. This way, older DTs which contain touchscreen-size-x and touchscreen-size-y properties will behave just like before and new DTs may avoid specifying these for ILI251x. Note that the command format is different on other controllers, so this functionality is isolated to ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - do not attempt IRQ workaround when deferring probeDmitry Torokhov
When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - set input device bus type and product IDDmitry Torokhov
Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-12Input: tsc200x - make tsc200x_remove() return voidUwe Kleine-König
Up to now tsc200x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-7-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-11Input: st1232 - prefer asynchronous probingJohn Keeping
The device may take up to 100ms to become responsive during probe, so prefer asynchronous probing to avoid delaying the rest of the system. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211007111217.1935858-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-11Input: st1232 - increase "wait ready" timeoutJohn Keeping
I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-22Input: raydium_i2c_ts - make use of the helper function ↵Cai Huoqing
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125212.95-3-caihuoqing@baidu.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-22Input: elants_i2c - make use of devm_add_action_or_reset()Cai Huoqing
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125212.95-2-caihuoqing@baidu.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - add support for controllers without flashHans de Goede
Some Goodix touchscreen controllers, such as for example the GT912, don't have flash-storage for their firmware. These models require the OS to load the firmware at runtime, as well as some other special handling. Add support for this to the goodix driver. This patch was developed and tested on a Glavey TM800A550L tablet. Note the "goodix,main-clk" and "firmware-name" device-properties used by the new code are *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this properties for now is purely a kernel-internal thing and the name/working of the properties may still be changed for now. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-7-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - allow specifying the config filenameHans de Goede
The config which needs to be send to the controller on some device-models is model-specific. Allow specifying a model-specific filename through a device-property, rather then always using a fixed filename. Note the "goodix,config-name" device-property used by this is *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this property for now is purely a kernel-internal thing and the name/working of the property may still be changed for now. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-6-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - push error logging up into i2c_read and i2c_write helpersHans de Goede
Make the goodix_i2c_read() and goodix_i2c_write*() helpers log errors themselves. This allows removing all the error logging from their callers. This already results in a nice cleanup with the current code and it also helps to make the upcoming support for controllers without flash cleaner. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - refactor reset handlingHans de Goede
Refactor reset handling a bit, change the main reset handler into a new goodix_reset_no_int_sync() helper and add a goodix_reset() wrapper which calls goodix_int_sync() separately. Also push the dev_err() call on reset failure into the goodix_reset_no_int_sync() and goodix_int_sync() functions, so that we don't need to have separate dev_err() calls in all their callers. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - add a goodix.h header fileHans de Goede
Add a goodix.h header file, and move the register definitions, and struct declarations there and add prototypes for various helper functions. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Since MAINTAINERS needs updating because of this change anyways, also add myself as co-maintainer. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-20Input: goodix - change goodix_i2c_write() len parameter type to intHans de Goede
Change the type of the goodix_i2c_write() len parameter to from 'unsigned' to 'int' to avoid bare use of 'unsigned', changing it to 'int' makes goodix_i2c_write()' prototype consistent with goodix_i2c_read(). Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ...
2021-09-09Input: ads7846 - switch to devm initializationDaniel Mack
This simplies the code a lot and fixes some potential resource leaks in the error return paths. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20210907200726.2034962-4-daniel@zonque.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-09Input: ads7846 - remove custom filter handling functions from pdataDaniel Mack
The functions in the platform data struct to initialize, cleanup and apply custom filters are not in use by any mainline board. Remove support for them to pave the road for more cleanups to come. The enum was moved as it has no users outside of the driver code itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210907200726.2034962-3-daniel@zonque.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-09Input: ads7846 - add short-hand for spi->dev in probe() functionDaniel Mack
This will make the code a bit more terse. No functional change intended. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210907200726.2034962-2-daniel@zonque.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-06Input: mms114 - support MMS134SLinus Walleij
The MMS134S like the MMS136 has an event size of 6 bytes. After this patch, the touchscreen on the Samsung SGH-I407 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210706235951.189289-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-05Input: raydium_i2c_ts - read device version in bootloader modesimba.hsu
Add support reading device ID when controller is in bootloader mode, which may happen if firmware update has been interrupted. Signed-off-by: simba.hsu <simba.hsu@rad-ic.com> Link: https://lore.kernel.org/r/20210818063644.8654-1-simba.hsu@rad-ic.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-05Input: edt-ft5x06 - added case for EDT EP0110M09Oliver Graute
Add Support for EP011M09 Firmware Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210813062110.13950-1-oliver.graute@kococonnector.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-05Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.15 merge window.
2021-09-03Input: Fix spelling mistake in Kconfig "Modul" -> "Module"Colin Ian King
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210704095702.37567-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-18Merge tag 'v5.13' into nextDmitry Torokhov
Sync up with the mainline to get the latest parport API.
2021-07-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for SparkFun Qwiic Joystick - pm8941-pwrkey driver now supports PMK8350 - a bunch of assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl Input: hideep - fix the uninitialized use in hideep_nvm_unlock() Input: trackpoint - use kobj_to_dev() Input: atkbd - use kobj_to_dev() Input: tsc200x-core - use kobj_to_dev() Input: ims-pcu - use kobj_to_dev() Input: cros_ec_keyb - use kobj_to_dev() API dt-bindings: input: touchscreen: st1232: Convert to json-schema Input: i8042 - fix typos in comments Input: add SparkFun Qwiic Joystick driver dt-bindings: Add vendor prefix and bindings for Qwiic Joystick Input: cy8ctmg110_ts - switch to using gpiod API Input: cy8ctmg110_ts - switch to using managed resources Input: cy8ctmg110_ts - use endian helpers when converting data on wire Input: cy8ctmg110_ts - let I2C core configure wake interrupt Input: cy8ctmg110_ts - do not hardcode as wakeup source Input: cy8ctmg110_ts - do not hard code interrupt trigger Input: cy8ctmg110_ts - rely on platform code to supply interrupt Input: resistive-adc-touch - fix uninitialized variable 'press' Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral ...
2021-07-04Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.14 merge window.
2021-06-19Input: hideep - fix the uninitialized use in hideep_nvm_unlock()Yizhuo Zhai
Inside function hideep_nvm_unlock(), variable "unmask_code" could be uninitialized if hideep_pgm_r_reg() returns error, however, it is used in the later if statement after an "and" operation, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-19Input: tsc200x-core - use kobj_to_dev()YueHaibing
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122451.36708-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - switch to using gpiod APIDmitry Torokhov
Instead of legacy gpio API let's use newer gpiod API. This also allows us to get rid of platform data. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-7-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - switch to using managed resourcesDmitry Torokhov
This simplifies error handling paths and allows to get rid of cy8ctmg110_remove() method. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - use endian helpers when converting data on wireDmitry Torokhov
Switch to using be16_to_cpup() instead of shifting and combining data by hand. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - let I2C core configure wake interruptDmitry Torokhov
I2C core already configures interrupt as wakeup source when device is registered using I2C_CLIENT_WAKE flag, so let's rely on it instead of configuring it ourselves. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - do not hardcode as wakeup sourceDmitry Torokhov
Let platform specify whether the controller should be a wakeup source by registering as I2C_CLIENT_WAKE. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - do not hard code interrupt triggerDmitry Torokhov
Rely on the platform to set up interrupt polarity/type properly instead of hard-coding falling edge. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: cy8ctmg110_ts - rely on platform code to supply interruptDmitry Torokhov
Instead of using platform data to specify GPIO that is used as interrupt source, rely on the platform and I2C core to set it up properly. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-05Input: resistive-adc-touch - fix uninitialized variable 'press'Colin Ian King
In the case where st->ch_map[GRTS_CH_PRESSURE] < GRTS_MAX_CHANNELS is false and also st->ch_map[GRTS_CH_Z1] < GRTS_MAX_CHANNELS is false the variable press is not initialized and contains garbage. In this situation st->pressure is also false, so we do not actually use press value, but it is impossible for the compiler to realize this, and it emits "uninitialized variable" warning. Fix this by initializing press to 0 and allows us to also remove an else clause that sets press to 0. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210603220809.155118-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: edt-ft5x06 - add support for iovcc-supplyStephan Gerhold
At the moment, the edt-ft5x06 driver can control a single regulator ("vcc"). However, some FocalTech touch controllers have an additional IOVCC pin that should be supplied with the digital I/O voltage. The I/O voltage might be provided by another regulator that should also be kept on. Otherwise, the touchscreen can randomly stop functioning if the regulator is turned off because no other components still require it. Implement (optional) support for also enabling an "iovcc-supply". The datasheet specifies a delay of ~ 10us before enabling VDD/VCC after IOVCC is enabled, so make sure to enable IOVCC first. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: cyttsp - remove public headerDmitry Torokhov
There is nothing in include/linux/input/cyttsp.h that might be of interes to the kernel at large, so let's move this information into the driver code and remove the header. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: resistive-adc-touch - rework mapping of channelsDmitry Torokhov
Instead of iterating over channels establish and use channel map to retrieve data. As a side effect this will silence "uninitialized variable" warnings. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/YLXR2brkc4H54xtK@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: resistive-adc-touch - replace OF headers with proper onesAndy Shevchenko
The driver is actually OF independent and doesn't need anything from OF (*). Replace OF headers with mod_devicetable.h and property.h. *) use of of_match_ptr() is actually wrong here, since it may provoke a compiler to warn about unused variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-2-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: resistive-adc-touch - describe parameters in kernel docAndy Shevchenko
Validation script is not happy: resistive-adc-touch.c:53: warning: Function parameter or member 'x_plate_ohms' not described in 'grts_state' resistive-adc-touch.c:53: warning: Function parameter or member 'ch' not described in 'grts_state' Describe parameters in kernel doc to make it happy. Fixes: fb082cd59afa ("Input: resistive-adc-touch - add support for z1 and z2 channels") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-30Input: cyttsp - do not force interrupt triggerDmitry Torokhov
Instead of forcing interrupt trigger to be "falling edge" let's rely on the platform to set it up according to how it is set up on a given board based on data in device tree or ACPI tables. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/YK7iO96g+7yIC0l1@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-30Input: elants_i2c - switch to probe_newTakashi Iwai
Now that we get rid of the usage of id argument at probe again, let's switch to the new i2c probe method; this will avoid for people misusing the possibly unassigned id pointer again. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210528071024.26450-2-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-30Input: elants_i2c - fix NULL dereference at probingTakashi Iwai
The recent change in elants_i2c driver to support more chips introduced a regression leading to Oops at probing. The driver reads id->driver_data, but the id may be NULL depending on the device type the driver gets bound. Replace the driver data extraction with the device_get_match_data() helper, and define the driver data in OF table, too. Fixes: 9517b95bdc46 ("Input: elants_i2c - add support for eKTF3624") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1186454 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210528071024.26450-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-26Input: cyttsp - obtain regulatorsLinus Walleij
The CYTTSP TMA340 chips have two supplies: VCPIN and VDD for analog and digital voltage respectively. Add some minimal code to obtain and enable these regulators if need be. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526230352.1433537-3-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-26Input: cyttsp - probe from compatiblesLinus Walleij
The driver (both SPI and I2C interface) should probe from the compatible strings, cypress,cy8ctma340 etc when using device tree, not as now, where it is probing implicitly from the I2C/SPI node name "cypress,cyttsp-i2c" etc. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526230352.1433537-2-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-25Input: resistive-adc-touch - add support for z1 and z2 channelsOleksij Rempel
This patch adds support for the z1 and z2 channels. These are used to calculate the applied pressure. As there is no common order of the individual channels of a resistive touch ADC, support for io-channel-names is added (although the DT bindings stated the driver already supports these). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210525054634.9134-5-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-25Merge tag 'v5.12' into nextDmitry Torokhov
Sync up with mainline to get the latest device tree bindings and kernel APIs.
generated by cgit (git 2.34.1) at 2025-07-19 19:31:22 +0000