summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)Author
2022-03-07nds32: Remove the architectureAlan Kao
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-04irqchip/meson-gpio: add select trigger type callbackQianggui Song
Due to some chips may use different registers and offset, provide a set trigger type call back and add one for old controller. Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220225055207.1048-4-qianggui.song@amlogic.com
2022-03-04irqchip/meson-gpio: support more than 8 channels gpio irqQianggui Song
Current meson gpio irqchip driver only support 8 channels for gpio irq line, later chips may have more then 8 channels, so need to modify code to support more. Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220225055207.1048-3-qianggui.song@amlogic.com
2022-03-04Merge branch irq/misc-5.18 into irq/irqchip-nextMarc Zyngier
* irq/misc-5.18: : . : Misc irq chip changes for 5.18 : : - GICv3: Relax ordering of previous stores to only include the ISH domain : : - nvic: Unmap MMIo region on probe failure : : - xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER when used on microblaze : . irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER irqchip/nvic: Release nvic_base upon failure irqchip/gic-v3: Use dsb(ishst) to order writes with ICC_SGI1R_EL1 accesses Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-03-04Merge branch irq/plic-cleanups into irq/irqchip-nextMarc Zyngier
* irq/plic-cleanups: : . : SiFive PLIC cleanups from Niklas Cassel: : : - Clarify some of the namings in the driver : : - Make sure S-mode interrupts are disabled when running in M-mode : . irqchip/sifive-plic: Disable S-mode IRQs if running in M-mode irqchip/sifive-plic: Improve naming scheme for per context offsets Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-03-04irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLERMichal Simek
Register the Xilinx driver as the root interrupt controller using the GENERIC_IRQ_MULTI_HANDLER API, instead of the arch-specific hack. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com> [maz: repainted commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/e6c6595a81f662bf839cee3109d0fa58a596ea47.1646380284.git.michal.simek@xilinx.com
2022-03-02irqchip/sifive-plic: Disable S-mode IRQs if running in M-modeNiklas Cassel
When detecting a context for a privilege mode different from the current running privilege mode, we simply skip to the next context register. This means that we never clear the S-mode enable bits when running in M-mode. On canaan k210, a bunch of S-mode interrupts are enabled by the bootrom. These S-mode specific interrupts should never trigger, since we never set the mie.SEIE bit in the parent interrupt controller (riscv-intc). However, we will be able to see the mip.SEIE bit set as pending. This isn't a good default when CONFIG_RISCV_M_MODE is set, since in that case we will never enter a lower privilege mode (e.g. S-mode). Let's clear the S-mode enable bits when running the kernel in M-mode, such that we won't have a interrupt pending bit set, which we will never clear. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220302131544.3166154-3-Niklas.Cassel@wdc.com
2022-03-02irqchip/sifive-plic: Improve naming scheme for per context offsetsNiklas Cassel
The PLIC supports a fixed number of contexts (15872). Each context has fixed register offsets in PLIC. The number of contexts that we need to initialize depends on the privilege modes supported by each hart. Therefore, this mapping between PLIC context registers to hart privilege modes is platform specific, and is currently supplied via device tree. For example, canaan,k210 has the following mapping: Context0: hart0 M-mode Context1: hart0 S-mode Context2: hart1 M-mode Context3: hart1 S-mode While sifive,fu540 has the following mapping: Context0: hart0 M-mode Context1: hart1 M-mode Context2: hart1 S-mode Because the number of contexts per hart is not fixed, the names ENABLE_PER_HART and CONTEXT_PER_HART for the register offsets are quite confusing and might mislead the reader to think that these are fixed register offsets per hart. Rename the offsets to more clearly highlight that these are per PLIC context and not per hart. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220302131544.3166154-2-Niklas.Cassel@wdc.com
2022-03-01Merge branch irq/qcom-pdc-cleanup into irq/irqchip-nextMarc Zyngier
* irq/qcom-pdc-cleanup: : . : Spring cleanup for the Qualcomm PDC driver, simplifying its : use of irq domains, replacing open-coded functionnalities with : the core code equivalent, and fixing the dodgy locking. : . irqchip/qcom-pdc: Drop open coded version of __assign_bit() irqchip/qcom-pdc: Fix broken locking irqchip/qcom-pdc: Kill qcom_pdc_translate helper irqchip/qcom-pdc: Kill non-wakeup irqdomain irqchip/qcom-pdc: Kill PDC_NO_PARENT_IRQ Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-03-01irqchip/nvic: Release nvic_base upon failureSouptick Joarder (HPE)
smatch warning was reported as below -> smatch warnings: drivers/irqchip/irq-nvic.c:131 nvic_of_init() warn: 'nvic_base' not released on lines: 97. Release nvic_base upon failure. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com
2022-03-01irqchip/qcom-pdc: Drop open coded version of __assign_bit()Marc Zyngier
The driver uses what looks like an open-coded version of __assign_bit(). Replace it with the real thing. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20220224101226.88373-6-maz@kernel.org
2022-03-01irqchip/qcom-pdc: Fix broken lockingMarc Zyngier
pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able, and has a raw spinlock for mutual exclusion, which is uses with interruptible primitives. This means that this critical section can itself be interrupted. Should the interrupt also be a PDC interrupt, and the endpoint driver perform an irq_disable() on that interrupt, we end-up in a deadlock. Fix this by using the irqsave/irqrestore variants of the locking primitives. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20220224101226.88373-5-maz@kernel.org
2022-03-01irqchip/qcom-pdc: Kill qcom_pdc_translate helperMarc Zyngier
qcom_pdc_translate() really is nothing but an open coded version of irq_domain_translate_twocell(). Get rid of it and use the common version instead. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20220224101226.88373-4-maz@kernel.org
2022-03-01irqchip/qcom-pdc: Kill non-wakeup irqdomainMarc Zyngier
A careful look at the way the PDC driver works shows that: - all interrupts are in the same space - all interrupts are treated the same And yet the driver creates two domains based on whether the interrupt gets mapped directly or from the pinctrl code, which is obviously a waste of resources. Kill the non-wakeup domain and unify all the interrupt handling. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220224101226.88373-3-maz@kernel.org
2022-03-01irqchip/qcom-pdc: Kill PDC_NO_PARENT_IRQMarc Zyngier
PDC_NO_PARENT_IRQ is pretty pointless, as all it indicates is that the PDC terminates the interrupt hierarchy. Which is exactly the same as not having a mapping in the GIC space. This is also bad practice to treat the absence of a hwirq as a hwirq itself. Just explicitly use the region mapping pointer, and drop the definition. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20220224101226.88373-2-maz@kernel.org
2022-02-23remove the h8300 architectureChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-21irqchip/gic-v3: Use dsb(ishst) to order writes with ICC_SGI1R_EL1 accessesBarry Song
A dsb(ishst) barrier should be enough to order previous writes with the system register generating the SGI, as we only need to guarantee the visibility of data to other CPUs in the inner shareable domain before we send the SGI. A micro-benchmark is written to verify the performance impact on kunpeng920 machine with 2 sockets, each socket has 2 dies, and each die has 24 CPUs, so totally the system has 2 * 2 * 24 = 96 CPUs. ~2% performance improvement can be seen by this benchmark. The code of benchmark module: #include <linux/module.h> #include <linux/timekeeping.h> volatile int data0 ____cacheline_aligned; volatile int data1 ____cacheline_aligned; volatile int data2 ____cacheline_aligned; volatile int data3 ____cacheline_aligned; volatile int data4 ____cacheline_aligned; volatile int data5 ____cacheline_aligned; volatile int data6 ____cacheline_aligned; static void ipi_latency_func(void *val) { } static int __init ipi_latency_init(void) { ktime_t stime, etime, delta; int cpu, i; int start = smp_processor_id(); stime = ktime_get(); for ( i = 0; i < 1000; i++) for (cpu = 0; cpu < 96; cpu++) { data0 = data1 = data2 = data3 = data4 = data5 = data6 = cpu; smp_call_function_single(cpu, ipi_latency_func, NULL, 1); } etime = ktime_get(); delta = ktime_sub(etime, stime); printk("%s ipi from cpu%d to cpu0-95 delta of 1000times:%lld\n", __func__, start, delta); return 0; } module_init(ipi_latency_init); static void ipi_latency_exit(void) { } module_exit(ipi_latency_exit); MODULE_DESCRIPTION("IPI benchmark"); MODULE_LICENSE("GPL"); run the below commands 10 times on both Vanilla and the kernel with this patch: # taskset -c 0 insmod test.ko # rmmod test The result on vanilla: ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126757449 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126784249 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126177703 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:127022281 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126184883 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:127374585 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:125778089 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126974441 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:127357625 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:126228184 The result on the kernel with this patch: ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:124467401 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123474209 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123558497 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:122993951 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:122984223 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123323609 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:124507583 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123386963 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123340664 ipi_latency_init ipi from cpu0 to cpu0-95 delta of 1000times:123285324 Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> [maz: tidied up commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220220061910.6155-1-21cnbao@gmail.com
2022-02-15Merge branch irq/print_chip into irq/irqchip-nextMarc Zyngier
* irq/print_chip: : . : Convert irqchip drivers that use the .name field as a topology : description to the .irq_print_chip callback, which allows the : name to be made dymanic. The irq_chip structures are then made : 'const' in order to prevent further abuse. : . irqchip/versatile-fpga: Switch to dynamic chip name output irqchip/ts4800: Switch to dynamic chip name output irqchip/mvebu-pic: Switch to dynamic chip name output irqchip/lpc32xx: Switch to dynamic chip name output irqchip/gic: Switch to dynamic chip name output genirq/debugfs: Use irq_print_chip() when provided by irqchip genirq: Allow irq_chip registration functions to take a const irq_chip irqdomain: Let irq_domain_set_{info,hwirq_and_chip} take a const irq_chip Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-15irqchip/versatile-fpga: Switch to dynamic chip name outputMarc Zyngier
Move the name output to the relevant callback, which allows us some nice cleanups (mostly owing to the fact that the driver is now DT only. We also drop a random include directive from the ftintc010 driver. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-8-maz@kernel.org
2022-02-15irqchip/ts4800: Switch to dynamic chip name outputMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-7-maz@kernel.org
2022-02-15irqchip/mvebu-pic: Switch to dynamic chip name outputMarc Zyngier
Instead of overriding the name field, track the corresponding device and use the relevant callback to output its name. This allows us to make the irq_chip structure const. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-6-maz@kernel.org
2022-02-15irqchip/lpc32xx: Switch to dynamic chip name outputMarc Zyngier
Instead of overriding the name field with the device name, use the relevant callback. This allows us to make the irq_chip structure const. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-5-maz@kernel.org
2022-02-15irqchip/gic: Switch to dynamic chip name outputMarc Zyngier
The last dynamic aspect of the GIC's irq_chip structure is the name that is associated to it. Move the output of that name to the relevant callback, which allows us to do a bit of cleanup and mark the structures const. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-4-maz@kernel.org
2022-02-10Merge branch irq/parent_device into irq/irqchip-nextMarc Zyngier
* irq/parent_device: : . : Move irq_chip::parent_device to irq_domain::dev to track the : PM state of the device implementing the irqchip. : . genirq: Kill irq_chip::parent_device pinctrl: starfive: Move PM device over to irq domain pinctrl: npcm: Fix broken references to chip->parent_device gpio: tpmx86: Move PM device over to irq domain gpio: rcar: Move PM device over to irq domain gpio: omap: Move PM device over to irq domain gpio: mt7621: Kill parent_device usage irqchip/imx-intmux: Move PM device over to irq domain irqchip/renesas-irqc: Move PM device over to irq domain irqchip/renesas-intc-irqpin: Move PM device over to irq domain irqchip/gic: Move PM device over to irq domain genirq: Allow the PM device to originate from irq domain Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-09irqchip/stm32-exti: Add STM32MP13 supportAlexandre Torgue
Enhance stm32-exti driver to support STM32MP13 SoC. This SoC uses the same hardware version than STM32MP15. Only EXTI line mapping is changed and following EXTI lines are supported: GPIO, RTC, I2C[1-5], UxART[1-8], USBH_EHCI, USBH_OHCI, USB_OTG, LPTIM[1-5], ETH[1-2]. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220202140005.860-3-alexandre.torgue@foss.st.com
2022-02-09irqchip/imx-intmux: Move PM device over to irq domainMarc Zyngier
Move the reference to the device over to the irq domain. This allows the irq_chip structure to be directly used instead of taking a copy for each instance. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220201120310.878267-6-maz@kernel.org
2022-02-09irqchip/renesas-irqc: Move PM device over to irq domainMarc Zyngier
Move the reference to the device over to the irq domain. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220201120310.878267-5-maz@kernel.org
2022-02-09irqchip/renesas-intc-irqpin: Move PM device over to irq domainMarc Zyngier
Move the reference to the device over to the irq domain. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220201120310.878267-4-maz@kernel.org
2022-02-09irqchip/gic: Move PM device over to irq domainMarc Zyngier
Move the reference to the GIC device over to the irq domain. This allows for some localised cleanup. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220201120310.878267-3-maz@kernel.org
2022-02-07irqchip/apple-aic: Move PMU-specific registers to their own include fileMarc Zyngier
As we are about to have a PMU driver, move the PMU bits from the AIC driver into a common include file. Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-07irqchip/apple-aic: Wire PMU interruptsMarc Zyngier
Add the necessary code to configure and P and E-core PMU interrupts with their respective affinities. When such an interrupt fires, map it onto the right pseudo-interrupt. Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-07irqchip/apple-aic: Parse FIQ affinities from device-treeMarc Zyngier
In order to be able to tell the core IRQ code about the affinity of the PMU interrupt in later patches, parse the affinities kindly provided in the device-tree. Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-02irqchip/sifive-plic: Add missing thead,c900-plic match stringGuo Ren
The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org
2022-02-02irqchip/gic-v3-its: Skip HP notifier when no ITS is registeredMarc Zyngier
We have some systems out there that have both LPI support and an ITS, but that don't expose the ITS in their firmware tables (either because it is broken or because they run under a hypervisor that hides it...). Is such a configuration, we still register the HP notifier to free the allocated tables if needed, resulting in a warning as there is no memory to free (nothing was allocated the first place). Fix it by keying the HP notifier on the presence of at least one sucessfully probed ITS. Fixes: d23bc2bc1d63 ("irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve") Reported-by: Steev Klimaszewski <steev@kali.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20220202103454.2480465-1-maz@kernel.org
2022-01-29Merge tag 'irqchip-fixes-5.17-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
2022-01-26irqchip/gic-v3-its: Reset each ITS's BASERn register before probeMarc Zyngier
A recent bug report outlined that the way GICv4.1 is handled across kexec is pretty bad. We can end-up in a situation where ITSs share memory (this is the case when SVPET==1) and reprogram the base registers, creating a situation where ITSs that are part of a given affinity group see different pointers. Which is illegal. Boo. In order to restore some sanity, reset the BASERn registers to 0 *before* probing any ITS. Although this isn't optimised at all, this is only a once-per-boot cost, which shouldn't show up on anyone's radar. Cc: Jay Chen <jkchen@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20211216190315.GA14220@lpieralisi Link: https://lore.kernel.org/r/20220124133809.1291195-1-maz@kernel.org
2022-01-22irqchip/gic-v3-its: Fix build for !SMPArd Biesheuvel
Commit 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") added a reference to cpus_booted_once_mask, which does not exist on !SMP builds, breaking the build for such configurations. Given the intent of the check, short circuit it to always pass. Cc: Valentin Schneider <valentin.schneider@arm.com> Fixes: 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220122151614.133766-1-ardb@kernel.org
2022-01-17irqchip/loongson-pch-ms: Use bitmap_free() to free bitmapChristophe JAILLET
kfree() and bitmap_free() are the same. But using the latter is more consistent when freeing memory allocated with bitmap_zalloc(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/0b982ab54844803049c217b2899baa59602faacd.1640529916.git.christophe.jaillet@wanadoo.fr
2022-01-17irqchip/realtek-rtl: Service all pending interruptsSander Vanheule
Instead of only servicing the lowest pending interrupt line, make sure all pending SoC interrupts are serviced before exiting the chained handler. This adds a small overhead if only one interrupt is pending, but should prevent rapid re-triggering of the handler. Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
2022-01-17irqchip/realtek-rtl: Fix off-by-one in routingSander Vanheule
There is an offset between routing values (1..6) and the connected MIPS CPU interrupts (2..7), but no distinction was made between these two values. This issue was previously hidden during testing, because an interrupt mapping was used where for each required interrupt another (unused) routing was configured, with an offset of +1. Offset the CPU IRQ numbers by -1 to retrieve the correct routing value. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net
2022-01-17irqchip/realtek-rtl: Map control data to virqSander Vanheule
The driver assigned the irqchip and irq handler to the hardware irq, instead of the virq. This is incorrect, and only worked because these irq numbers happened to be the same on the devices used for testing the original driver. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4b4936606480265db47df152f00bc2ed46340599.1641739718.git.sander@svanheule.net
2022-01-17irqchip/apple-aic: Drop unused ipi_hwirq fieldMarc Zyngier
This field was never used, remove it. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220108140118.3378937-1-maz@kernel.org
2022-01-13Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
2022-01-10Merge tag 'irqchip-5.17' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Fix GICv3 redistributor table reservation with RT across kexec - Fix GICv4.1 redistributor view of the VPE table across kexec - Add support for extra interrupts on spear-shirq - Make obtaining some interrupts optional for the Renesas drivers - Various cleanups and bug fixes Link: https://lore.kernel.org/lkml/20220108130807.4109738-1-maz@kernel.org
2021-12-20Merge branch irq/misc-5.17 into irq/irqchip-nextMarc Zyngier
* irq/misc-5.17: : . : Misc irqchip fixes: : : - Disable GICv4.1 RD's VPE table at boot time to avoid RAS errors : - Fix Ingenic TCU's u32/unsigned long abuse : - Some GICv2m constifying : - Mark imx_gpcv2_instance as __ro_after_init : - Enable a few missing IRQs on Spear : - Conversion to platform_get_irq_optional() for the Renesas irqchips : . irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-12-20irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the ↵Lad Prabhakar
interrupt platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2021-12-20irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-2-prabhakar.mahadev-lad.rj@bp.renesas.com
2021-12-16soc: ti: ti_sci_inta_msi: Use msi_desc::msi_indexThomas Gleixner
Use the common msi_index member and get rid of the pointless wrapper struct. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20211210221814.540704224@linutronix.de
2021-12-16platform-msi: Rename functions and clarify commentsThomas Gleixner
It's hard to distinguish what platform_msi_domain_alloc() and platform_msi_domain_alloc_irqs() are about. Make the distinction more explicit and add comments which explain the use cases properly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211210221814.228706214@linutronix.de
2021-12-16device: Move MSI related data into a structThomas Gleixner
The only unconditional part of MSI data in struct device is the irqdomain pointer. Everything else can be allocated on demand. Create a data structure and move the irqdomain pointer into it. The other MSI specific parts are going to be removed from struct device in later steps. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211210221813.617178827@linutronix.de
generated by cgit (git 2.34.1) at 2025-07-19 13:51:14 +0000