summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw
AgeCommit message (Collapse)Author
2022-11-07mtd: rawnand: qcom: handle ret from parse with codeword_fixupChristian Marangi
With use_codeword_fixup enabled, any return from mtd_device_parse_register gets overwritten. Aside from the clear bug, this is also problematic as a parser can EPROBE_DEFER and because this is not correctly handled, the nand is never rescanned later in the bootup process. An example of this problem is when smem requires additional time to be probed and nandc use qcomsmempart as parser. Parser will return EPROBE_DEFER but in the current code this ret gets overwritten by qcom_nand_host_parse_boot_partitions and qcom_nand_host_init_and_register return 0. Correctly handle the return code from mtd_device_parse_register so that any error from this function is not ignored. Fixes: 862bdedd7f4b ("mtd: nand: raw: qcom_nandc: add support for unprotected spare data pages") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221021165304.19991-1-ansuelsmth@gmail.com
2022-10-18mtd: rawnand: cadence: support 64-bit slave dma interfaceValentin Korenblit
32-bit accesses on 64-bit sdma trigger sdma_err in intr_status register. Check dma capabilities before reading/writing from/to sdma interface. Link: https://lore.kernel.org/all/b7e5ebb4-0de8-4958-9bc4-fe06ec4c3635@www.fastmail.com/t/ Signed-off-by: Valentin Korenblit <vkorenblit@sequans.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221018093000.12072-1-vkorenblit@sequans.com
2022-10-18mtd: rawnand: mpc5121: Replace NO_IRQ by 0Christophe Leroy
NO_IRQ is used to check the return of irq_of_parse_and_map(). On some architecture NO_IRQ is 0, on other architectures it is -1. irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ. So use 0 instead of using NO_IRQ. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/4e3ca3e0077ea124ea210c312e6e620f0f9e8bca.1665034065.git.christophe.leroy@csgroup.eu
2022-10-18mtd: rawnand: lpc32xx_slc: switch to using gpiod APIDmitry Torokhov
This switches the driver from legacy gpio API to a newer gpiod API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220928230019.2140896-2-dmitry.torokhov@gmail.com
2022-10-18mtd: rawnand: lpc32xx_mlc: switch to using gpiod APIDmitry Torokhov
This switches the driver from legacy gpio API to a newer gpiod API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220928230019.2140896-1-dmitry.torokhov@gmail.com
2022-10-18mtd: rawnand: marvell: Use correct logic for nand-keep-configTony O'Brien
Originally the absence of the marvell,nand-keep-config property caused the setup_data_interface function to be provided. However when setup_data_interface was moved into nand_controller_ops the logic was unintentionally inverted. Update the logic so that only if the marvell,nand-keep-config property is present the bootloader NAND config kept. Cc: stable@vger.kernel.org Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz
2022-10-18mtd: rawnand: tegra: Fix PM disable depth imbalance in probeZhang Qilong
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Cc: stable@vger.kernel.org Fixes: d7d9f8ec77fe9 ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220926084456.98160-1-zhangqilong3@huawei.com
2022-10-18mtd: rawnand: intel: Add missing of_node_put() in ebu_nand_probe()Yang Yingliang
The 'chip_np' returned by of_get_next_child() with refcount decremented, of_node_put() need be called in error path to decrease the refcount. Fixes: bfc618fcc3f1 ("mtd: rawnand: intel: Read the chip-select line from the correct OF node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220924131010.957117-1-yangyingliang@huawei.com
2022-10-18mtd: rawnand: gpmi: using pm_runtime_resume_and_get instead of ↵Zhang Qilong
pm_runtime_get_sync Using the newest pm_runtime_resume_and_get is more appropriate for simplifing code here. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220922150654.117568-1-zhangqilong3@huawei.com
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-07Merge tag 'nand/for-6.1' into mtd/nextMiquel Raynal
Raw NAND core changes: * Replace of_gpio_named_count() by gpiod_count() - Remove misguided comment of nand_get_device() - bbt: Use the bitmap API to allocate bitmaps Raw NAND controller drivers changes: * Meson: - Stop supporting legacy clocks - Refine resource getting in probe - Convert bindings to yaml - Fix clock handling and update the bindings accordingly - Fix bit map use in meson_nfc_ecc_correct() * bcm47xx: - Fix spelling typo in comment * STM32 FMC2: - Switch to using devm_fwnode_gpiod_get() - Fix dma_map_sg error check * Cadence: - Remove an unneeded result variable * Marvell: - Fix error handle regarding dma_map_sg * Orion: - Use devm_clk_get_optional() * Cafe: - Use correct function name in comment block * Atmel: - Unmap streaming DMA mappings * Arasan: - Stop using 0 as NULL pointer * GPMI: - Fix typo 'the the' in comment * BRCM: - Add individual glue driver selection - Move Kconfig to driver folder * FSL: Fix none ECC mode * Intel: - Use devm_platform_ioremap_resource_byname() - Remove unused clk_rate member from struct ebu_nand - Remove unused nand_pa member from ebu_nand_cs - Don't re-define NAND_DATA_IFACE_CHECK_ONLY - Remove undocumented compatible string - Fix compatible string in the bindings - Read the chip-select line from the correct OF node - Fix maximum chip select value in the bindings Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-09-21mtd: rawnand: meson: stop supporting legacy clocksLiang Yang
meson NFC driver only uses common clock interfaces, which triggers kernel test robot errors when using legacy clocks with HAVE_LEGACY_CLK on. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Liang Yang <liang.yang@amlogic.com> [miquel.raynal@bootlin.com: Rephrase the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-6-liang.yang@amlogic.com
2022-09-21mtd: rawnand: meson: refine resource getting in probeLiang Yang
simply use devm_platform_ioremap_resource_byname() instead of two steps: res = platform_get_resource(pdev, IORESOURCE_MEM, 0) and reg_base = devm_ioremap_resource(dev, res) Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-4-liang.yang@amlogic.com
2022-09-21mtd: rawnand: meson: fix the clockLiang Yang
EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK' which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is the divider and bit6~7 is the mux for fix pll and xtal. At the beginning, a common MMC and NAND sub-clock was discussed and planed to be implemented as NFC clock provider, but now this series of patches of a common MMC and NAND sub-clock are never being accepted. the reasons for giving up are: 1. EMMC and NAND, which are mutually exclusive anyway 2. coupling the EMMC and NAND. 3. it seems that a common MMC and NAND sub-clock is over engineered. and let us see the link fot more information: https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com so The meson nfc can't work now, let us rework the clock. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-3-liang.yang@amlogic.com
2022-09-21mtd: rawnand: bcm47xx: fix spelling typo in commentJiangshan Yi
Fix spelling typo in comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220905063232.1830197-1-13667453960@163.com
2022-09-21mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node() so that gpiolib can be cleaned a bit, so let's switch to the generic fwnode property API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220903-gpiod_get_from_of_node-remove-v1-3-b29adfb27a6c@gmail.com
2022-09-21mtd: rawnand: cadence: Remove an unneeded result variableye xingchen
Return the value cadence_nand_set_access_width16() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220901074555.313266-1-ye.xingchen@zte.com.cn
2022-09-21mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()Andy Shevchenko
As a preparation to unexport of_gpio_named_count(), convert the driver to use gpiod_count() instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220830183336.49966-1-andriy.shevchenko@linux.intel.com
2022-09-21mtd: rawnand: marvell: Fix error handle regarding dma_map_sgJack Wang
dma_map_sg return 0 on error, in case of error return -EIO, also add the dma_unmap_sg as rollback on the following error. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Christophe Kerello <christophe.kerello@foss.st.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Cc: linux-mtd@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220819060801.10443-6-jinpu.wang@ionos.com
2022-09-21mtd: rawnand: stm32_fmc2: Fix dma_map_sg error checkJack Wang
dma_map_sg return 0 on error, in case of error return -EIO. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Christophe Kerello <christophe.kerello@foss.st.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Cc: linux-mtd@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220819060801.10443-5-jinpu.wang@ionos.com
2022-09-21mtd: rawnand: remove misguided comment of nand_get_device()ChenXiaoSong
After commit 8cba323437a4 ("mtd: rawnand: protect access to rawnand devices while in suspend"), it will wait while in suspend rather than returning errors. So remove the misguided comment about return value. Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220819021846.2924539-1-chenxiaosong2@huawei.com
2022-09-21mtd: rawnand: orion: Use devm_clk_get_optional()Christophe JAILLET
Use devm_clk_get_optional() instead of hand writing it. While at it, use dev_err_probe() to further simplify the code. This is also less verbose if clk_get() returns -EPROBE_DEFER. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/a5bde48e3e1165dd65d1d1c1739e03ace1bef5d3.1659907229.git.christophe.jaillet@wanadoo.fr
2022-09-21mtd: rawnand: cafe: Use correct function name in comment blockColin Ian King
The incorrect function name is being used in the comment for function cafe_nand_read_page. Correct it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220805180117.2375503-1-colin.i.king@gmail.com
2022-09-21mtd: rawnand: atmel: Unmap streaming DMA mappingsTudor Ambarus
Every dma_map_single() call should have its dma_unmap_single() counterpart, because the DMA address space is a shared resource and one could render the machine unusable by consuming all DMA addresses. Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Cc: stable@vger.kernel.org Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Alexander Dahl <ada@thorsis.com> Reported-by: Peter Rosin <peda@axentia.se> Tested-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
2022-09-21mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()Dan Carpenter
The meson_nfc_ecc_correct() function accidentally does a right shift instead of a left shift so it only works for BIT(0). Also use BIT_ULL() because "correct_bitmap" is a u64 and we want to avoid shift wrapping bugs. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/YuI2zF1hP65+LE7r@kili
2022-09-21mtd: rawnand: arasan: stop using 0 as NULL pointerGONG, Ruiqi
Fix the following sparse warnings: drivers/mtd/nand/raw/arasan-nand-controller.c:918:70: warning: Using plain integer as NULL pointer drivers/mtd/nand/raw/arasan-nand-controller.c:918:73: warning: Using plain integer as NULL pointer Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220725112108.686347-1-gongruiqi1@huawei.com
2022-09-21mtd: rawnand: gpmi: Fix typo 'the the' in commentSlark Xiao
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220722072850.72797-1-slark_xiao@163.com
2022-09-21mtd: rawnand: brcmnand: Add individual glue driver selectionFlorian Fainelli
Allow each platform to define a dedicated Kconfig entry for its glue driver such that we can decide on a per-platfomr basis whether to build it or not. This allows for a finer grained control over the resulting kernel image or set of modules. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-3-f.fainelli@gmail.com
2022-09-21mtd: rawnand: brcmnand: Move Kconfig to driver folderFlorian Fainelli
In preparation for allowing each of the brcmnand stub to be built separately, move the Kconfig entry to the driver folder. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-2-f.fainelli@gmail.com
2022-09-21mtd: add ECC error accounting for each read requestMichał Kępień
Extend struct mtd_req_stats with two new fields holding the number of corrected bitflips and uncorrectable errors detected during a read operation. This is a prerequisite for ultimately passing those counters to user space, where they can be useful to applications for making better-informed choices about moving data around. Unlike 'max_bitflips' (which is set - in a common code path - to the return value of a function called while the MTD device's mutex is held), these counters have to be maintained in each MTD driver which defines the '_read_oob' callback because the statistics need to be calculated while the MTD device's mutex is held. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-4-kernel@kempniu.pl
2022-09-21mtd: always initialize 'stats' in struct mtd_oob_opsMichał Kępień
As the 'stats' field in struct mtd_oob_ops is used in conditional expressions, ensure it is always zero-initialized in all such structures to prevent random stack garbage from being interpreted as a pointer. Strictly speaking, this problem currently only needs to be fixed for struct mtd_oob_ops structures subsequently passed to mtd_read_oob(). However, this commit goes a step further and makes all instances of struct mtd_oob_ops in the tree zero-initialized, in hope of preventing future problems, e.g. if struct mtd_req_stats gets extended with write statistics at some point. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-3-kernel@kempniu.pl
2022-09-20mtd: rawnand: fsl_elbc: Fix none ECC modePali Rohár
Commit f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work") added support for specifying ECC mode via DTS and skipping autodetection. But it broke explicit specification of HW ECC mode in DTS as correct settings for HW ECC mode are applied only when NONE mode or nothing was specified in DTS file. Also it started aliasing NONE mode to be same as when ECC mode was not specified and disallowed usage of ON_DIE mode. Fix all these issues. Use autodetection of ECC mode only in case when mode was really not specified in DTS file by checking that ecc value is invalid. Set HW ECC settings either when HW ECC was specified in DTS or it was autodetected. And do not fail when ON_DIE mode is set. Fixes: f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220707184328.3845-1-pali@kernel.org
2022-09-20mtd: rawnand: intel: Use devm_platform_ioremap_resource_byname()Martin Blumenstingl
Switch from open-coded platform_get_resource_byname() and devm_ioremap_resource() to devm_platform_ioremap_resource_byname() where possible to simplify the code. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-9-martin.blumenstingl@googlemail.com
2022-09-20mtd: rawnand: intel: Remove unused clk_rate member from struct ebu_nandMartin Blumenstingl
The clk_rate member from struct ebu_nand is only written but never read. Remove this unused and unneeded member. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-8-martin.blumenstingl@googlemail.com
2022-09-20mtd: rawnand: intel: Remove unused nand_pa member from ebu_nand_csMartin Blumenstingl
The nand_pa member from struct ebu_nand_cs is only written but never read. Remove this unused and unneeded member. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-7-martin.blumenstingl@googlemail.com
2022-09-20mtd: rawnand: intel: Don't re-define NAND_DATA_IFACE_CHECK_ONLYMartin Blumenstingl
NAND_DATA_IFACE_CHECK_ONLY is already defined in include/linux/mtd/rawnand.h which is also included by the driver. Drop the re-definition from the intel-nand-controller driver. Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-6-martin.blumenstingl@googlemail.com
2022-09-20mtd: rawnand: intel: Remove undocumented compatible stringMartin Blumenstingl
The "intel,nand-controller" compatible string is not part of the dt-bindings. Remove it from the driver as it's not supposed to be used without any documentation for it. Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-5-martin.blumenstingl@googlemail.com
2022-09-20mtd: rawnand: intel: Read the chip-select line from the correct OF nodeMartin Blumenstingl
The chip select has to be read from the flash node which is a child node of the NAND controller. Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-4-martin.blumenstingl@googlemail.com
2022-08-05Merge tag 'mtd/for-5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - Dynamic partition support - Fix deadlock in sm_ftl - Various refcount fixes in maps, partitions and parser code - Integer overflow fixes in mtdchar - Support for Sercomm partitions NAND driver changes: - Clockrate fix for arasan - Add ATO25D1GA support - Double free fix for meson driver - Fix probe/remove methods in cafe NAND - Support unprotected spare data pages in qcom_nandc SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes/g: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups" * tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits) mtd: core: check partition before dereference mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}() mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups mtd: spi-nor: spansion: Add local function to discover page size mtd: spi-nor: core: Track flash's internal address mode mtd: spi-nor: core: Return error code from set_4byte_addr_mode() mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes mtd: spi-nor: s/addr_width/addr_nbytes mtd: spi-nor: esmt: Use correct name of f25l32qa mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it MAINTAINERS: Use my kernel.org email mtd: rawnand: arasan: Fix clock rate in NV-DDR mtd: rawnand: arasan: Update NAND bus clock instead of system clock mtd: core: introduce of support for dynamic partitions dt-bindings: mtd: partitions: add additional example for qcom,smem-part dt-bindings: mtd: partitions: support label/name only partition mtd: spi-nor: move SECT_4K_PMC special handling mtd: dataflash: Add SPI ID table mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path ...
2022-08-01Merge tag 'spi-nor/for-5.20' into mtd/nextRichard Weinberger
SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups.
2022-08-01Merge remote-tracking branch 'korg_git/nand/next' into mtd/nextRichard Weinberger
2022-07-15mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase timesSascha Hauer
06781a5026350 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong though: It is calculated based on the maximum page read time, but the timeout is also used for page write and block erase operations which require orders of magnitude bigger timeouts. Fix this by calculating busy_timeout_cycles from the maximum of tBERS_max and tPROG_max. This is for now the easiest and most obvious way to fix the driver. There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us the desired timeout for the current operation, so we could program the timeout dynamically for each operation instead of setting a fixed timeout. Also we could wire up the interrupt handler to actually detect and forward timeouts occurred when waiting for the chip being ready. As a sidenote I verified that the change in 06781a5026350 is really correct. I wired up the interrupt handler in my tree and measured the time between starting the operation and the timeout interrupt handler coming in. The time increases 41us with each step in the timeout register which corresponds to 4096 clock cycles with the 99MHz clock that I have. Fixes: 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Fixes: b1206122069aa ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Han Xu <han.xu@nxp.com> Tested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-06-29mtd: rawnand: arasan: Fix clock rate in NV-DDROlga Kitaina
According to the Arasan NAND controller spec, the flash clock rate for SDR must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the CLK line for the mode. The driver previously always set 100 MHz for NV-DDR, which would result in incorrect behavior for NV-DDR modes 0-4. The appropriate clock rate can be calculated from the NV-DDR timing parameters as 1/tCK, or for rates measured in picoseconds, 10^12 / nand_nvddr_timings->tCK_min. Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller") CC: stable@vger.kernel.org # 5.8+ Signed-off-by: Olga Kitaina <okitain@gmail.com> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com
2022-06-29mtd: rawnand: arasan: Update NAND bus clock instead of system clockAmit Kumar Mahapatra
In current implementation the Arasan NAND driver is updating the system clock(i.e., anand->clk) in accordance to the timing modes (i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be updated instead. This patch keeps the system clock unchanged and updates the NAND bus clock as per the timing modes. Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller") CC: stable@vger.kernel.org # 5.8+ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-2-amit.kumar-mahapatra@xilinx.com
2022-06-24mtd: rawnand: sm_common: drop unexpected word 'is' in the commentsJiang Jian
there is an unexpected word 'is' in the comments that need to be dropped file: drivers/mtd/nand/raw/sm_common.c line: 55 /* NOTE: This layout is is not compatabable with SmartMedia, */ changed to: /* NOTE: This layout is not compatabable with SmartMedia, */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220622160511.11679-1-jiangjian@cdjrlc.com
2022-06-17mtd: nand: raw: qcom_nandc: add support for unprotected spare data pagesChristian Marangi
IPQ8064 nand have special pages where a different layout scheme is used. These special page are used by boot partition and on reading them lots of warning are reported about wrong ECC data and if written to results in broken data and not bootable device. The layout scheme used by these special page consist in using 512 bytes as the codeword size (even for the last codeword) while writing to CFG0 register. This forces the NAND controller to unprotect the 4 bytes of spare data. Since the kernel is unaware of this different layout for these special page, it does try to protect the spare data too during read/write and warn about CRC errors. Add support for this by permitting the user to declare these special pages in dts by declaring offset and size of the partition. The driver internally will convert these value to nand pages. On user read/write the page is checked and if it's a boot page the correct layout is used. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220616001835.24393-3-ansuelsmth@gmail.com
2022-06-17mtd: nand: raw: qcom_nandc: reorder qcom_nand_host structChristian Marangi
Reorder structs in nandc driver to save holes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220616001835.24393-2-ansuelsmth@gmail.com
2022-06-16mtd: rawnand: gpmi: Fix setting busy timeout settingSascha Hauer
The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as: | Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY | mode. This value is the number of GPMI_CLK cycles multiplied by 4096. So instead of multiplying the value in cycles with 4096, we have to divide it by that value. Use DIV_ROUND_UP to make sure we are on the safe side, especially when the calculated value in cycles is smaller than 4096 as typically the case. This bug likely never triggered because any timeout != 0 usually will do. In my case the busy timeout in cycles was originally calculated as 2408, which multiplied with 4096 is 0x968000. The lower 16 bits were taken for the 16 bit wide register field, so the register value was 0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings setting") however the value in cycles became 2384, which multiplied with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an intermediate timeout when reading from NAND. Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
generated by cgit (git 2.34.1) at 2025-07-18 19:54:23 +0000