summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)Author
2015-09-17i40e/i40evf: add get AQ result command to nvmupdate utilityShannon Nelson
Add a facility to recover the result of a previously run AQ command. Change-ID: I21afec2c20c1a5e6ba60c7fbfcbedfff78c10e45 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-17i40e/i40evf: add exec_aq command to nvmupdate utilityShannon Nelson
Add a facility to run AQ commands through the nvmupdate utility in order to allow the update tools to interact with the FW and do special commands needed for updates and configuration changes. Change-ID: I5c41523e4055b37f8e4ee479f7a0574368f4a588 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-17i40e/i40evf: add wait states to NVM state machineShannon Nelson
This adds wait states to the NVM update state machine to signify when waiting for an update operation to finish, whether we're in the middle of a set of Write operations, or we're now idle but waiting. Change-ID: Iabe91d6579ef6a2ea560647e374035656211ab43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-17i40e/i40evf: add GetStatus command for nvmupdateShannon Nelson
This adds a new GetStatus command so that the NVM update tool can query the current status instead of doing fake write requests to probe for readiness. Change-ID: I671ec6ccd4dfc9dbac3a03b964589d693fda5cd8 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-17i40e/i40evf: add handling of writeback descriptorShannon Nelson
If the writeback descriptor buffer was previously created, this gives it to the AQ command request to be used to save the results. Change-ID: I8c8a1af81e6ebed6d0a15ed31697fe1a6c4e3708 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-17i40e/i40evf: save aq writeback for future inspectionShannon Nelson
Add the ability to save the AdminQ write back descriptor if a caller supplies a buffer for it to be saved into. Change-ID: I3d1301d26360b39a2d66dc8569e851f54133a3af Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40e/i40evf: Bump i40e to 1.3.9 and i40evf to 1.3.5Catherine Sullivan
Bump version and update the copyright year for i40evf. Change-ID: Iddb81b9dba09f0dc57ab54937b5821ecdd721ff6 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40e/i40evf: Cache the CEE TLV status returned from firmwareNeerav Parikh
Store the CEE TLV status returned by firmware to allow drivers to dump that for debug purposes. Change-ID: Ie3c4cf8cebabee4f15e1e3fdc4fc8a68bbca40ee Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40e/i40evf: add VIRTCHNL_VF_OFFLOAD flagAnjali Singhai Jain
Add virtual channel offload capability to support RX polling mode in the VF. Change-ID: Ib643ae2a7506dfc75fc489fc207493fabefa4832 Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40evf: Remove PF specific register definitions from the VFAnjali Singhai Jain
There were quite a few issues when the wrong defines were getting used in the VF driver. This patch fixes the code where PF driver registers were getting used for VF driver, and also removes the registers that are not being used from the VF register file. Change-ID: If116a9730112950d006eb8ec763998fc914cc839 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40evf: Use the correct defines to match the VF registersAnjali Singhai Jain
Use CTLN1 instead of CTLN for the VF relative register space. Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40e/i40evf: Add capability to gather VEB per TC statsNeerav Parikh
This patch adds capability to update per VEB per TC statistics and dump it via ethtool. It also adds a structure to hold VEB per TC statistics. The fields can be filled by reading the GLVEBTC_* counters. Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add TX/RX outer UDP checksum support for X722Anjali Singhai Jain
X722 supports offloading of outer UDP TX and RX checksum for tunneled packets. This patch exposes the support and leaves it enabled by default. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add support for writeback on ITR feature for X722Anjali Singhai Jain
X722 fixes an issue from X710 where TX descriptor WB would not happen if the interrupts were disabled. In order for the write backs to happen a bit needs to be set in the dynamic interrupt control register called WB_ON_ITR. With this feature, the SW driver need not arm SW interrupts to work around the issue in X710. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: RSS changes for X722Anjali Singhai Jain
X722 uses the admin queue to configure RSS. This patch adds the necessary flow changes to configure RSS through AQ. It also adds the separate VMDQ2 lookup tables and hash key programming for X722. X722 also exposes a different set of PCTYPES for RSS, this patch accommodates those changes. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Update register.h file for X722Anjali Singhai Jain
Update the i40e and i40evf register.h file with the registers for X722. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Update FW API with X722 supportAnjali Singhai Jain
This patch does the firmware API update to support the new X722 device. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add flags for X722 capabilitiesAnjali Singhai Jain
Add capabilities flags specific to X722. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add device ids for X722Anjali Singhai Jain
Adding device ids for new hardware X722 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e: use BIT and BIT_ULL macrosJesse Brandeburg
Use macros for abstracting (1 << foo) to BIT(foo) and (1ULL << foo64) to BIT_ULL(foo64) in order to match better with kernel requirements. NOTE: the adminq_cmd.h file was not modified on purpose because of the dependency upon firmware for that file. Change-ID: I73ee2e48c880d671948aad19bd53ca6b2ac558fc Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e: clean up error status messagesShannon Nelson
Clean up a little confusion in reporting error status in phy and fcoe setup error reports by separating the return status from the AQ error. Add two decoder functions to make this easier. Change-ID: I960bcdeef3978a15fec1cdb5eff781d5cbae42fb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40evf: support virtual channel API version 1.1Mitch Williams
Store off the PF's API version, then use it to determine whether or not to send it our capabilities. Change the version checking to allow for PF drivers with lower API versions than our current version, so we can still talk to PF drivers over the 1.0 API. Change-ID: I8edc55d1229c7decf0ed3f285a63032694007c2e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40evf: handle big resetsMitch Williams
The most common type of reset that the VF will encounter is a PF reset that cascades down into a VF reset for each VF. In this case, the VF will always be assigned the same VSI and recovery is fairly simple. However, in the case of 'bigger' resets, such as a Core or EMP reset, when the device is reinitialized, it's probable that the VF will NOT get the same VSI. When this happens, the VF will not be able to recover, as it will continue to request resources for its original VSI. Add an extra state to the admin queue state machine so that the driver can re-request its configuration information at runtime. During reset recovery, set this bit in the aq_required field, and fetch the (possibly new) configuration information before attempting to bring the driver back up. Since the driver doesn't know what kind of reset it has encountered, this step is done even for a PF reset, but it doesn't hurt anything - it just gets the same VSI back. Change-ID: I915d59ffb40375215117362f4ac7a37811aba748 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e/i40evf: add macros for virtual channel API version and device capabilityMitch Williams
Now that we've rolled the virtual channel API version to 1.1, add some macros to test what version is being used by our partner in crime. For the VF, add some macros to determine what our device capabilities are. Change-ID: I79f6683d4c23bd76a8ad9fd492776fcc1208e1dc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e: add VF capabilities to virtual channel interfaceMitch Williams
To prepare for the changes coming up in the X722 device and future devices, the virtual channel interface has to change slightly. The VF driver can now report what its capable of supporting, which then informs the PF driver when it sends the configuration information back to the VF. A 1.1 VF driver on a 1.0 PF driver should not send its capabilities. Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect or depend upon receiving the VF capabilities. All other aspects of the API are unchanged. Change-ID: I530cc55f107edd1ee8bdf95830aa90b87854058a Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Anjali Singhai <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e/i40evf: Fix and refactor dynamic ITR codeCarolyn Wyborny
This patch changes the switch statement for dynamic interrupt throttling and adds a default case. With this patch, we check the latency setting instead of the current ITR settings and the included refactor improves performance. Without this patch, the ITR setting would never change dynamically, and there was no default. Change-ID: Idb5a8a14c7109ec47c90f6e94bd43baa17d7ee37 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: Bump version to 1.3.6 for i40e and 1.3.2 for i40evfCatherine Sullivan
Bump. Change-ID: I84573d9fa51effc5b29bf5b8c74e3cc8b2673f48 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: Add support for pre-allocated pages for PDFaisal Latif
The i40e_add_pd_table_entry() routine is being modified to handle both cases where a backing page is passed and where backing page is allocated in i40e_add_pd_table_entry(). For PBLE resource management, it is more efficient for it to manage its backing pages. For VF, PBLE backing page addresses will be send to PF driver for PBLE resource. The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and free only ones which were allocated in i40e_add_pd_table_entry(). Change-ID: Ie673f0403f22979e9406f5a94048dceb91bcf9a8 Signed-off-by: Faisal Latif <faisal.latif@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40evf: add MAC address filter in open, not initMitch Williams
During close, all of the MAC filters are cleared, so the driver would be unable to receive unicast packets after being closed and reopened. Add the adapter's "hardware" MAC address filter in open, not init. This ensures that the correct filter is present each time. Change-ID: I51a11e9c1200139dab6f66a5353bd38c7d26f875 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40evf: don't delete all the filtersMitch Williams
Due to an inverted conditional, the driver was marking all of its MAC filters for deletion every time set_rx_mode was called. Depending upon the timing of the calls to set_rx_mode and the processing of the admin queue, the driver would (accidentally) end up with a varying number of functional filters. Correct this logic so that MAC filters are added and removed correctly. Add a check for the driver's "hardware" MAC address so that this filter doesn't get removed incorrectly. Change-ID: Ib3e7c4a5b53df6835f164fe44cb778cb71f8aff8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: Update the admin queue command headerGreg Rose
Make the necessary updates to i40e_adminq_cmd.h. Change-ID: Ib031c86cc6cab78e5aa44c64d8ce5474be8d7e42 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40evf: Allow for an abundance of vectorsMitch Williams
The driver currently only maps TX and RX queues to a single MSI-X vector per queue pair if there are exactly enough vectors for this. Unfortunately, if we have too many vectors it will fail and allocate queues to vectors in a suboptimal manner. Change the condition check to allow for excess vectors. In this case, the extras just won't be used. Change-ID: I23e1e2955c64739c86612db88a25583e6a7e0b17 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: improve Tx performance with a small tweakJesse Brandeburg
Add a prefetch for the next Tx descriptor to be used when we know there are more coming. Change-ID: Ibb9acab11d508eec2db7da795df74debc16eeacb Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: Update Flex-10 related device/function capabilitiesPawel Orlowski
The Flex10 device/function capability has been upgraded to include information needed to support Flex-10 configurations. This patch adds new fields to the i40e_hw_capabilities structure and updates i40e_parse_discover_capabilities functions to extract them from the AQ response. Naming convention has changed to use flex10 mode instead of existing mfp_mode_1. Change-ID: I305dd888866985a30293acb3fb14fa43ca6b79ea Signed-off-by: Pawel Orlowski <pawel.orlowski@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: Add stats to track FD ATR and SB dynamic enable stateAnjali Singhai Jain
Since the driver can dynamically enable/disable FD ATR and SB features, these stats help keep track of the current state and along with fd_flush count provide a means to debug what could be going on with the flow director filters. This will take away the need for being verbose in our debug logs with respect to FD. Change-ID: I29224f750fe6602391043655d18996570720377d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26i40evf: don't configure unused RSS queuesMitch Williams
The driver will only configure as many queues as there are available CPUs, up the maximum number of queues. However, it always configures RSS as though it is using the maximum number of queues. This can cause the device to drop a lot of RX traffic, as the packets get assigned to nonfunctional queues. Fix this by only configuring RSS with the number of active queues. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26i40evf: fix panic during MTU changeMitch Williams
Down was requesting queue disables, but then exited immediately without waiting for the queues to actually disable. This could allow any function called after i40evf_down to run immediately, including i40evf_up, and causes a memory leak. Removing the whole reinit_locked function is the best way to go about this, and allows for the driver to handle the state changes by requesting reset from the periodic timer. Also, add a couple WARN_ONs in slow path to help us recognize if we re-introduce this issue or missed any cases. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-06-04i40e/i40evf: Fix mixed size frags and linearizationAnjali Singhai Jain
This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: remove time_stamp memberJesse Brandeburg
The driver doesn't use the time_stamp member to determine if there is a tx_hang any more. There really isn't any point to the variable at all so just remove it. It was left over from a previous tx_hang design. Change-ID: I4c814827e1bcb46e45118fe37acdcfa814fb62a0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: force inline transmit functionsJesse Brandeburg
Inlining these functions gives us about 15% more 64 byte packets per second when using pktgen. 13.3 million to 15 million with a single queue. Also fix the function names in i40evf to i40evf not i40e while we are touching the function header. Change-ID: I3294ae9b085cf438672b6db5f9af122490ead9d0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40evf: skb->xmit_more supportJesse Brandeburg
Eric added support for skb->xmit_more in i40e, this ports that into i40evf as well. Support skb->xmit_more in i40evf is straightforward; we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Change-ID: Idddda6a2e4a7ab335631c91ced51f55b25eb8468 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: Remove unneeded TODOGreg Rose
There's no need for a counter so remove the TODO comment. Change-ID: I3321dda04934c4f5fda9b279ab666192bda44214 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: Add stats to count Tunnel ATR hitsAnjali Singhai Jain
Add a 3rd dynamic filter counter to track Tunneled ATR hits separately. Ethtool port stat "fdir_atr_tunnel_match" Change-ID: Idd978b6db2a462b5722397cd2ffd04ef055f8655 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: Add ATR support for tunneled TCP/IPv4/IPv6 packets.Anjali Singhai Jain
Without this, RSS would have done inner header load balancing. Now we can get the benefits of ATR for tunneled packets to better align TX and RX queues with the right core/interrupt. Change-ID: I07d0e0a192faf28fdd33b2f04c32b2a82ff97ddd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-14net: batch of last_rx update avoidance in ethernet drivers.françois romieu
None of those drivers uses last_rx for its own needs. See 4dc89133f49b8cfd77ba7e83f5960aed63aaa99e ("net: add a comment on netdev->last_rx") for reference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14i40e/i40evf: Save WR_CSR_PROT field from DEV/FUNC capabilitiesKevin Scott
Store the 8 bytes of the WR_CSR_PROT field returned as part of the get device/function capabilities AQ command. Change-ID: Ifcaeea2ff29885fa769e4f384c7db88a25e8afd0 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40evf: remove aq_pendingMitch Williams
The aq_pending field in the adapter structure is actually redundant with the current_op field. Remove the aq_pending field and expunge all traces of it from the official record. This simplifies the code significantly, especially in the virtual channel completion routine. Change-ID: Ib2957c8c19882bd0cecc6fcd133912c24b46a1ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14i40evf: fix bad indentationMitch Williams
Not sure how this slipped through. Cosmetic change only. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-09i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck
Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 23:52:13 +0000