summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)Author
2024-09-06ice: don't set target VSI for subfunctionMichal Swiatkowski
Add check for subfunction before setting target VSI. It is needed for PF in switchdev mode but not for subfunction (even in switchdev mode). Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: create port representor for SFMichal Swiatkowski
Implement attaching and detaching SF port representor. It is done in the same way as the VF port representor. SF port representor is always added or removed with devlink lock taken. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: make representor code genericMichal Swiatkowski
Keep the same flow of port representor creation, but instead of general attach function create helpers for specific representor type. Store function pointer for add and remove representor. Type of port representor can be also known based on VSI type, but it is more clean to have it directly saved in port representor structure. Add devlink lock for whole port representor creation and destruction. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: implement netdev for subfunctionPiotr Raczynski
Configure netdevice for subfunction usecase. Mostly it is reusing ops from the PF netdevice. SF netdev is linked to devlink port registered after SF activation. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: base subfunction aux driverPiotr Raczynski
Implement subfunction driver. It is probe when subfunction port is activated. VSI is already created. During the probe VSI is being configured. MAC unicast and broadcast filter is added to allow traffic to pass. Store subfunction pointer in VSI struct. The same is done for VF pointer. Make union of subfunction and VF pointer as only one of them can be set with one VSI. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: allocate devlink for subfunctionPiotr Raczynski
Allocate devlink for subfunction instance. Create header file for subfunction device. Define subfunction device structure there as it is needed for devlink allocation. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: treat subfunction VSI the same as PF VSIMichal Swiatkowski
When subfunction VSI is open the same code as for PF VSI should be executed. Also when up is complete. Reflect that in code by adding subfunction VSI to consideration. In case of stopping, PF doesn't have additional tasks, so the same is with subfunction VSI. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: add basic devlink subfunctions supportPiotr Raczynski
Implement devlink port handlers responsible for ethernet type devlink subfunctions. Create subfunction devlink port and setup all resources needed for a subfunction netdev to operate. Configure new VSI for each new subfunction, initialize and configure interrupts and Tx/Rx resources. Set correct MAC filters and create new netdev. For now, subfunction is limited to only one Tx/Rx queue pair. Only allocate new subfunction VSI with devlink port new command. Allocate and free subfunction MSIX interrupt vectors using new API calls with pci_msix_alloc_irq_at and pci_msix_free_irq. Support both automatic and manual subfunction numbers. If no subfunction number is provided, use xa_alloc to pick a number automatically. This will find the first free index and use that as the number. This reduces burden on users in the simple case where a specific number is not required. It may also be slightly faster to check that a number exists since xarray lookup should be faster than a linear scan of the dyn_ports xarray. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: export ice ndo_ops functionsPiotr Raczynski
Make some of the netdevice_ops functions visible from outside for another VSI type created netdev. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: add new VSI type for subfunctionsPiotr Raczynski
Add required plumbing for new VSI type dedicated to devlink subfunctions. Make sure that the vsi is properly configured and destroyed. Also allow loading XDP and AF_XDP sockets. The first implementation of devlink subfunctions supports only one Tx/Rx queue pair per given subfunction. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03ice: do not bring the VSI up, if it was down before the XDP setupLarysa Zaremba
After XDP configuration is completed, we bring the interface up unconditionally, regardless of its state before the call to .ndo_bpf(). Preserve the information whether the interface had to be brought down and later bring it up only in such case. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: remove ICE_CFG_BUSY locking from AF_XDP codeLarysa Zaremba
Locking used in ice_qp_ena() and ice_qp_dis() does pretty much nothing, because ICE_CFG_BUSY is a state flag that is supposed to be set in a PF state, not VSI one. Therefore it does not protect the queue pair from e.g. reset. Remove ICE_CFG_BUSY locking from ice_qp_dis() and ice_qp_ena(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: check ICE_VSI_DOWN under rtnl_lock when preparing for resetLarysa Zaremba
Consider the following scenario: .ndo_bpf() | ice_prepare_for_reset() | ________________________|_______________________________________| rtnl_lock() | | ice_down() | | | test_bit(ICE_VSI_DOWN) - true | | ice_dis_vsi() returns | ice_up() | | | proceeds to rebuild a running VSI | .ndo_bpf() is not the only rtnl-locked callback that toggles the interface to apply new configuration. Another example is .set_channels(). To avoid the race condition above, act only after reading ICE_VSI_DOWN under rtnl_lock. Fixes: 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: check for XDP rings instead of bpf program when unconfiguringLarysa Zaremba
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on VSI without applying new ring configuration. When unconfiguring the VSI, we can encounter the state in which there is an XDP program but no XDP rings to destroy or there will be XDP rings that need to be destroyed, but no XDP program to indicate their presence. When unconfiguring, rely on the presence of XDP rings rather then XDP program, as they better represent the current state that has to be destroyed. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: protect XDP configuration with a mutexLarysa Zaremba
The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_xdp() can just hot-swap the program. Also, as ice_vsi_rebuild() flow is touched in this patch, make it more consistent by deconfiguring VSI when coalesce allocation fails. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03ice: move netif_queue_set_napi to rtnl-protected sectionsLarysa Zaremba
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 Fixes: 080b0c8d6d26 ("ice: Fix ASSERT_RTNL() warning during certain scenarios") Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-28ice: Add netif_device_attach/detach into PF reset flowDawid Osuchowski
Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-27Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-26 (ice) This series contains updates to ice driver only. Jake implements and uses rd32_poll_timeout to replace a jiffies loop for calling ice_sq_done. The rd32_poll_timeout() function is designed to allow simplifying other places in the driver where we need to read a register until it matches a known value. Jake, Bruce, and Przemek update ice_debug_cq() to be more robust, and more useful for tracing control queue messages sent and received by the device driver. Jake rewords several commands in the ice_control.c file which previously referred to the "Admin queue" when they were actually generic functions usable on any control queue. Jake removes the unused and unnecessary cmd_buf array allocation for send queues. This logic originally was going to be useful if we ever implemented asynchronous completion of transmit messages. This support is unlikely to materialize, so the overhead of allocating a command buffer is unnecessary. Sergey improves the log messages when the ice driver reports that the NVM version on the device is not supported by the driver. Now, these messages include both the discovered NVM version and the requested/expected NVM version. Aleksandr Mishin corrects overallocation of memory related to adding scheduler nodes. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node() ice: Report NVM version numbers on mismatch during load ice: remove unnecessary control queue cmd_buf arrays ice: reword comments referring to control queues ice: stop intermixing AQ commands/responses debug dumps ice: do not clutter debug logs with unused data ice: improve debug print for control queue messages ice: implement and use rd32_poll_timeout for ice_sq_done timeout ==================== Link: https://patch.msgid.link/20240826224655.133847-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26ice: add callbacks for Embedded SYNC enablement on dpll pinsArkadiusz Kubalewski
Allow the user to get and set configuration of Embedded SYNC feature on the ice driver dpll pins. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20240822222513.255179-3-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26ice: Adjust over allocation of memory in ice_sched_add_root_node() and ↵Aleksandr Mishin
ice_sched_add_node() In ice_sched_add_root_node() and ice_sched_add_node() there are calls to devm_kcalloc() in order to allocate memory for array of pointers to 'ice_sched_node' structure. But incorrect types are used as sizeof() arguments in these calls (structures instead of pointers) which leads to over allocation of memory. Adjust over allocation of memory by correcting types in devm_kcalloc() sizeof() arguments. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: Report NVM version numbers on mismatch during loadSergey Temerkhanov
Report NVM version numbers (both detected and expected) when a mismatch b/w driver and firmware is detected. This provides more useful information about which NVM version the driver expects, rather than requiring manual code inspection. Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: remove unnecessary control queue cmd_buf arraysJacob Keller
The driver allocates a cmd_buf array in addition to the desc_buf array. This array stores an ice_sq_cd command details structure for each entry in the control queue ring. The contents of the structure are copied from the value passed in via ice_sq_send_cmd, and include only a pointer to storage for the write back descriptor contents. Originally this array was intended to support asynchronous completion including features such as a callback function. This support was never implemented. All that exists today is needless copying and resetting of a cmd_buf array that is otherwise functionally unused. Since we do not plan to implement asynchronous completions, drop this unnecessary memory and logic. This saves memory for each control queue, and avoids the pointless copying and memset. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: reword comments referring to control queuesJacob Keller
Many comments in ice_controlq.c use the term "Admin queue" despite the code being intended for arbitrary control queues, not just the Admin queue. Reword the comments to make it clear that this code is the generic control queue logic that is shared by all of the control queues, and is not specific to the Admin queue. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: stop intermixing AQ commands/responses debug dumpsPrzemek Kitszel
The ice_debug_cq() function is called to generate a debug log of control queue messages both sent and received. It currently does this over a potential total of 6 different printk invocations. The main logic prints over 4 calls to ice_debug(): 1. The metadata including opcode, flags, datalength and return value. 2. The cookie in the descriptor. 3. The parameter values. 4. The address for the databuffer. In addition, if the descriptor has a data buffer, it can be logged with two additional prints: 5. A message indicating the start of the data buffer. 6. The actual data buffer, printed using print_hex_dump_debug. This can lead to trouble in the event that two different PFs are logging messages. The messages become intermixed and it may not be possible to determine which part of the output belongs to which control queue message. To fix this, it needs to be possible to unambiguously determine which messages belong together. This is trivial for the messages that comprise the main printing. Combine them together into a single invocation of ice_debug(). The message containing a hex-dump of the data buffer is a bit more complicated. This is printed separately as part of print_hex_dump_debug. This function takes a prefix, which is currently always set to KBUILD_MODNAME. Extend this prefix to include the buffer address for the databuffer, which is printed as part of the main print, and which is guaranteed to be unique for each buffer. Refactor the ice_debug_array(), introducing an ice_debug_array_w_prefix(). Build the prefix by combining KBUILD_MODNAME with the databuffer address using snprintf(). These changes make it possible to unambiguously determine what data belongs to what control queue message. Reported-by: Jacek Wierzbicki <jacek.wierzbicki@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: do not clutter debug logs with unused dataBruce Allan
Currently, debug logs are unnecessarily cluttered with the contents of command data buffers even if the receiver of that command (i.e. FW or MBX) are not told to read the buffer. Change to only log command data buffers when the RD flag (indicates receiver needs to read the buffer) is set. Continue to log response data buffer when the returned datalen is non-zero. Also, rename a local variable to reflect what is in the hardware specification and how it is used elsewhere in the code, use local variables instead of duplicating endian conversions unnecessarily and remove an unnecessary assignment. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: improve debug print for control queue messagesJacob Keller
The ice_debug_cq function is called to print debug data for a control queue descriptor in multiple places. This includes both before we send a message on a transmit queue, after the writeback completion of a message on the transmit queue, and when we receive a message on a receive queue. This function does not include data about *which* control queue the message is on, nor whether it was what we sent to the queue or what we received from the queue. Modify ice_debug_cq to take two extra parameters, a pointer to the control queue and a boolean indicating if this was a response or a command. Improve the debug messages by replacing "CQ CMD" with a string indicating which specific control queue (based on cq->qtype) and whether this was a command sent by the PF or a response from the queue. This helps make the log output easier to understand and consume when debugging. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-26ice: implement and use rd32_poll_timeout for ice_sq_done timeoutJacob Keller
The ice_sq_done function is used to check the control queue head register and determine whether or not the control queue processing is done. This function is called in a loop checking against jiffies for a specified timeout. The pattern of reading a register in a loop until a condition is true or a timeout is reached is a relatively common pattern. In fact, the kernel provides a read_poll_timeout function implementing this behavior in <linux/iopoll.h> Use of read_poll_timeout is preferred over directly coding these loops. However, using it in the ice driver is a bit more difficult because of the rd32 wrapper. Implement a rd32_poll_timeout wrapper based on read_poll_timeout. Refactor ice_sq_done to use rd32_poll_timeout, replacing the loop calling ice_sq_done in ice_sq_send_cmd. This simplifies the logic down to a single ice_sq_done() call. The implementation of rd32_poll_timeout uses microseconds for its timeout value, so update the CQ timeout macros used to be specified in microseconds units as well instead of using HZ for jiffies. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.h c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops") f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC") Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ice: Fix a 32bit bugDan Carpenter
BIT() is unsigned long but ->pu.flg_msk and ->pu.flg_val are u64 type. On 32 bit systems, unsigned long is a u32 and the mismatch between u32 and u64 will break things for the high 32 bits. Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/ddc231a8-89c1-4ff4-8704-9198bcb41f8d@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20ice: use internal pf id instead of function numberMichal Swiatkowski
Use always the same pf id in devlink port number. When doing pass-through the PF to VM bus info func number can be any value. Fixes: 2ae0aa4758b0 ("ice: Move devlink port to PF/VF struct") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix truesize operations for PAGE_SIZE >= 8192Maciej Fijalkowski
When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192, truesize is calculated and stored in xdp_buff::frame_sz per each processed Rx buffer. This means that frame_sz will contain the truesize based on last received buffer, but commit 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") assumed this value will be constant for each buffer, which breaks the page recycling scheme and mess up the way we update the page::page_offset. To fix this, let us work on constant truesize when PAGE_SIZE >= 8192 instead of basing this on size of a packet read from Rx descriptor. This way we can simplify the code and avoid calculating truesize per each received frame and on top of that when using xdp_update_skb_shared_info(), current formula for truesize update will be valid. This means ice_rx_frame_truesize() can be removed altogether. Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff() in ice_vsi_cfg_rxq(). This should have been removed at the point where xdp_buff struct started to be a member of ice_rx_ring and it was no longer a stack based variable. There are two fixes tags as my understanding is that the first one exposed us to broken truesize and page_offset handling and then second introduced broken skb_shared_info update in ice_{construct,build}_skb(). Reported-and-tested-by: Luiz Capitulino <luizcap@redhat.com> Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/ Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix ICE_LAST_OFFSET formulaMaciej Fijalkowski
For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers. Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not ICE_RXBUF_2048. Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag") Suggested-by: Luiz Capitulino <luizcap@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-20ice: fix page reuse when PAGE_SIZE is over 8kMaciej Fijalkowski
Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the same as x86 currently, meaning reuse of a page should only take place when no one else is busy with it. Do two things independently of underlying PAGE_SIZE: - store the page count under ice_rx_buf::pgcnt - then act upon its value vs ice_rx_buf::pagecnt_bias when making the decision regarding page reuse Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13iavf: add support for offloading tc U32 cls filtersAhmed Zaki
Add support for offloading cls U32 filters. Only "skbedit queue_mapping" and "drop" actions are supported. Also, only "ip" and "802_3" tc protocols are allowed. The PF must advertise the VIRTCHNL_VF_OFFLOAD_TC_U32 capability flag. Since the filters will be enabled via the FD stage at the PF, a new type of FDIR filters is added and the existing list and state machine are used. The new filters can be used to configure flow directors based on raw (binary) pattern in the rx packet. Examples: 0. # tc qdisc add dev enp175s0v0 ingress 1. Redirect UDP from src IP 192.168.2.1 to queue 12: # tc filter add dev <dev> protocol ip ingress u32 \ match u32 0x45000000 0xff000000 at 0 \ match u32 0x00110000 0x00ff0000 at 8 \ match u32 0xC0A80201 0xffffffff at 12 \ match u32 0x00000000 0x00000000 at 24 \ action skbedit queue_mapping 12 skip_sw 2. Drop all ICMP: # tc filter add dev <dev> protocol ip ingress u32 \ match u32 0x45000000 0xff000000 at 0 \ match u32 0x00010000 0x00ff0000 at 8 \ match u32 0x00000000 0x00000000 at 24 \ action drop skip_sw 3. Redirect ICMP traffic from MAC 3c:fd:fe:a5:47:e0 to queue 7 (note proto: 802_3): # tc filter add dev <dev> protocol 802_3 ingress u32 \ match u32 0x00003CFD 0x0000ffff at 4 \ match u32 0xFEA547E0 0xffffffff at 8 \ match u32 0x08004500 0xffffff00 at 12 \ match u32 0x00000001 0x000000ff at 20 \ match u32 0x0000 0x0000 at 40 \ action skbedit queue_mapping 7 skip_sw Notes on matches: 1 - All intermediate fields that are needed to parse the correct PTYPE must be provided (in e.g. 3: Ethernet Type 0x0800 in MAC, IP version and IP length: 0x45 and protocol: 0x01 (ICMP)). 2 - The last match must provide an offset that guarantees all required headers are accounted for, even if the last header is not matched. For example, in #2, the last match is 4 bytes at offset 24 starting from IP header, so the total is 14 (MAC) + 24 + 4 = 42, which is the sum of MAC+IP+ICMP headers. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: enable FDIR filters from raw binary patterns for VFsJunfeng Guo
Enable VFs to create FDIR filters from raw binary patterns. The corresponding processes for raw flow are added in the Parse / Create / Destroy stages. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add method to disable FDIR SWAP optionJunfeng Guo
The SWAP Flag in the FDIR Programming Descriptor doesn't work properly, it is always set and cannot be unset (hardware bug). Thus, add a method to effectively disable the FDIR SWAP option by setting the FDSWAP instead of FDINSET registers. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add API for parser profile initializationJunfeng Guo
Add API ice_parser_profile_init() to init a parser profile based on a parser result and a mask buffer. The ice_parser_profile struct is used by the low level FXP engine to create HW profile/field vectors. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add UDP tunnels support to the parserJunfeng Guo
Add support for the vxlan, geneve, ecpri UDP tunnels through the following APIs: - ice_parser_vxlan_tunnel_set() - ice_parser_geneve_tunnel_set() - ice_parser_ecpri_tunnel_set() Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: support turning on/off the parser's double vlan modeJunfeng Guo
Add API ice_parser_dvm_set() to support turning on/off the parser's double vlan mode. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add parser execution main loopJunfeng Guo
Implement the core work of the runtime parser via: - ice_parser_rt_execute() - ice_parser_rt_reset() - ice_parser_rt_pkt_buf_set() Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add parser internal helper functionsJunfeng Guo
Add the following internal helper functions: - ice_bst_tcam_match(): to perform ternary match on boost TCAM. - ice_pg_cam_match(): to perform parse graph key match in cam table. - ice_pg_nm_cam_match(): to perform parse graph key no match in cam table. - ice_ptype_mk_tcam_match(): to perform ptype markers match in tcam table. - ice_flg_redirect(): to redirect parser flags to packet flags. - ice_xlt_kb_flag_get(): to aggregate 64 bit packet flag into 16 bit key builder flags. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add debugging functions for the parser sectionsJunfeng Guo
Add debug for all parser sections. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: parse and init various DDP parser sectionsJunfeng Guo
Parse the following DDP sections: - ICE_SID_RXPARSER_IMEM into an array of struct ice_imem_item - ICE_SID_RXPARSER_METADATA_INIT into an array of struct ice_metainit_item - ICE_SID_RXPARSER_CAM or ICE_SID_RXPARSER_PG_SPILL into an array of struct ice_pg_cam_item - ICE_SID_RXPARSER_NOMATCH_CAM or ICE_SID_RXPARSER_NOMATCH_SPILL into an array of struct ice_pg_nm_cam_item - ICE_SID_RXPARSER_CAM into an array of ice_bst_tcam_item - ICE_SID_LBL_RXPARSER_TMEM into an array of ice_lbl_item - ICE_SID_RXPARSER_MARKER_PTYPE into an array of ice_ptype_mk_tcam_item - ICE_SID_RXPARSER_MARKER_GRP into an array of ice_mk_grp_item - ICE_SID_RXPARSER_PROTO_GRP into an array of ice_proto_grp_item - ICE_SID_RXPARSER_FLAG_REDIR into an array of ice_flg_rd_item - ICE_SID_XLT_KEY_BUILDER_SW, ICE_SID_XLT_KEY_BUILDER_ACL, ICE_SID_XLT_KEY_BUILDER_FD and ICE_SID_XLT_KEY_BUILDER_RSS into struct ice_xlt_kb Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add parser create and destroy skeletonJunfeng Guo
Add new parser module which can parse a packet in binary and generate information like ptype, protocol/offset pairs and flags which can be later used to feed the FXP profile creation directly. Add skeleton of the create and destroy APIs: ice_parser_create() ice_parser_destroy() Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-12ethtool: rss: don't report key if device doesn't support itJakub Kicinski
marvell/otx2 and mvpp2 do not support setting different keys for different RSS contexts. Contexts have separate indirection tables but key is shared with all other contexts. This is likely fine, indirection table is the most important piece. Don't report the key-related parameters from such drivers. This prevents driver-errors, e.g. otx2 always writes the main key, even when user asks to change per-context key. The second reason is that without this change tracking the keys by the core gets complicated. Even if the driver correctly reject setting key with rss_context != 0, change of the main key would have to be reflected in the XArray for all additional contexts. Since the additional contexts don't have their own keys not including the attributes (in Netlink speak) seems intuitive. ethtool CLI seems to deal with it just fine. Having to set the flag in majority of the drivers is a bit tedious but not reporting the key is a safer default. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-07ice: Fix incorrect assigns of FEC countsMateusz Polchlopek
Commit ac21add2540e ("ice: Implement driver functionality to dump fec statistics") introduces obtaining FEC correctable and uncorrectable stats per netdev in ICE driver. Unfortunately the assignment of values to fec_stats structure has been done incorrectly. This commit fixes the assignments. Fixes: ac21add2540e ("ice: Implement driver functionality to dump fec statistics") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Skip PTP HW writes during PTP reset procedureGrzegorz Nitka
Block HW write access for the driver while the device is in reset to avoid potential race condition and access to the PTP HW in non-nominal state which could lead to undesired effects Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Fix reset handlerGrzegorz Nitka
Synchronize OICR IRQ when preparing for reset to avoid potential race conditions between the reset procedure and OICR Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 17:37:13 +0000