summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)Author
2024-04-22ice: Add tx_scheduling_layers devlink paramLukasz Czapnik
It was observed that Tx performance was inconsistent across all queues and/or VSIs and that it was directly connected to existing 9-layer topology of the Tx scheduler. Introduce new private devlink param - tx_scheduling_layers. This parameter gives user flexibility to choose the 5-layer transmit scheduler topology which helps to smooth out the transmit performance. Allowed parameter values are 5 and 9. Example usage: Show: devlink dev param show pci/0000:4b:00.0 name tx_scheduling_layers pci/0000:4b:00.0: name tx_scheduling_layers type driver-specific values: cmode permanent value 9 Set: devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 5 cmode permanent devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 9 cmode permanent Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22ice: Enable switching default Tx scheduler topologyMichal Wilczynski
Introduce support for Tx scheduler topology change, based on user selection, from default 9-layer to 5-layer. Change requires NVM (version 3.20 or newer) and DDP package (OS Package 1.3.30 or newer - available for over a year in linux-firmware, since commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0")) https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637 Enable 5-layer topology switch in init path of the driver. To accomplish that upload of the DDP package needs to be delayed, until change in Tx topology is finished. To trigger the Tx change user selection should be changed in NVM using devlink. Then the platform should be rebooted. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22ice: Adjust the VSI/Aggregator layersRaj Victor
Adjust the VSI/Aggregator layers based on the number of logical layers supported by the FW. Currently the VSI and Aggregator layers are fixed based on the 9 layer scheduler tree layout. Due to performance reasons the number of layers of the scheduler tree is changing from 9 to 5. It requires a readjustment of these VSI/Aggregator layer values. Signed-off-by: Raj Victor <victor.raj@intel.com> Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22ice: Support 5 layer topologyRaj Victor
There is a performance issue when the number of VSIs are not multiple of 8. This is caused due to the max children limitation per node(8) in 9 layer topology. The BW credits are shared evenly among the children by default. Assume one node has 8 children and the other has 1. The parent of these nodes share the BW credit equally among them. Apparently this causes a problem for the first node which has 8 children. The 9th VM get more BW credits than the first 8 VMs. Example: 1) With 8 VM's: for x in 0 1 2 3 4 5 6 7; do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done tx_queue_0_packets: 23283027 tx_queue_1_packets: 23292289 tx_queue_2_packets: 23276136 tx_queue_3_packets: 23279828 tx_queue_4_packets: 23279828 tx_queue_5_packets: 23279333 tx_queue_6_packets: 23277745 tx_queue_7_packets: 23279950 tx_queue_8_packets: 0 2) With 9 VM's: for x in 0 1 2 3 4 5 6 7 8; do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done tx_queue_0_packets: 24163396 tx_queue_1_packets: 24164623 tx_queue_2_packets: 24163188 tx_queue_3_packets: 24163701 tx_queue_4_packets: 24163683 tx_queue_5_packets: 24164668 tx_queue_6_packets: 23327200 tx_queue_7_packets: 24163853 tx_queue_8_packets: 91101417 So on average queue 8 statistics show that 3.7 times more packets were send there than to the other queues. The FW starting with version 3.20, has increased the max number of children per node by reducing the number of layers from 9 to 5. Reflect this on driver side. Signed-off-by: Raj Victor <victor.raj@intel.com> Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22devlink: extend devlink_param *set pointerMateusz Polchlopek
Extend devlink_param *set function pointer to take extack as a param. Sometimes it is needed to pass information to the end user from set function. It is more proper to use for that netlink instead of passing message to dmesg. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-18Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-17 (ice) This series contains updates to ice driver only. Marcin adds Tx malicious driver detection (MDD) events to be included as part of mdd-auto-reset-vf. Dariusz removes unnecessary implementation of ndo_get_phys_port_name. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Remove ndo_get_phys_port_name ice: Add automatic VF reset on Tx MDD events ==================== Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/trace/events/rpcgss.h 386f4a737964 ("trace: events: cleanup deprecated strncpy uses") a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field") Adjacent changes: drivers/net/ethernet/intel/ice/ice_tc_lib.c 2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device") 784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17ice: Remove ndo_get_phys_port_nameDariusz Aftanski
ndo_get_phys_port_name is never actually used, as in switchdev devlink is always being created. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17ice: Add automatic VF reset on Tx MDD eventsMarcin Szycik
In cases when VF sends malformed packets that are classified as malicious, it can cause Tx queue to freeze as a result of Malicious Driver Detection event. Such malformed packets can appear as a result of a faulty userspace app running on VF. This frozen queue can be stuck for several minutes being unusable. User might prefer to immediately bring the VF back to operational state after such event, which can be done by automatically resetting the VF which caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf flag private flag needs to be set). Extend the VF auto reset to also cover Tx MDD events. When any MDD event occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set, perform a graceful VF reset to quickly bring it back to operational state. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-16ice: Fix checking for unsupported keys on non-tunnel deviceMarcin Szycik
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing. Without these checks, it would be possible to add filters with tunnel options on non-tunnel devices. enc_* options are only valid for tunnel devices. Example: devlink dev eswitch set $PF1_PCI mode switchdev echo 1 > /sys/class/net/$PF1/device/sriov_numvfs tc qdisc add dev $VF1_PR ingress ethtool -K $PF1 hw-tc-offload on tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-16ice: tc: allow zero flags in parsing tc flowerMichal Swiatkowski
The check for flags is done to not pass empty lookups to adding switch rule functions. Since metadata is always added to lookups there is no need to check against the flag. It is also fixing the problem with such rule: $ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \ enc_dst_port 2123 action drop Switch block in case of GTP can't parse the destination port, because it should always be set to GTP specific value. The same with ethertype. The result is that there is no other matching criteria than GTP tunnel. In this case flags is 0, rule can't be added only because of defensive check against flags. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-16ice: tc: check src_vsi in case of traffic from VFMichal Swiatkowski
In case of traffic going from the VF (so ingress for port representor) source VSI should be consider during packet classification. It is needed for hardware to not match packets from different ports with filters added on other port. It is only for "from VF" traffic, because other traffic direction doesn't have source VSI. Set correct ::src_vsi in rule_info to pass it to the hardware filter. For example this rule should drop only ipv4 packets from eth10, not from the others VF PRs. It is needed to check source VSI in this case. $tc filter add dev eth10 ingress protocol ip flower skip_sw action drop Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12ice: store VF relative MSI-X index in q_vector->vf_reg_idxJacob Keller
The ice physical function driver needs to configure the association of queues and interrupts on behalf of its virtual functions. This is done over virtchnl by the VF sending messages during its initialization phase. These messages contain a vector_id which the VF wants to associate with a given queue. This ID is relative to the VF space, where 0 indicates the control IRQ for non-queue interrupts. When programming the mapping, the PF driver currently passes this vector_id directly to the low level functions for programming. This works for SR-IOV, because the hardware uses the VF-based indexing for interrupts. This won't work for Scalable IOV, which uses PF-based indexing for programming its VSIs. To handle this, the driver needs to be able to look up the proper index to use for programming. For typical IRQs, this would be the q_vector->reg_idx field. The q_vector->reg_idx can't be set to a VF relative value, because it is used when the PF needs to control the interrupt, such as when triggering a software interrupt on stopping the Tx queue. Thus, introduce a new q_vector->vf_reg_idx which can store the VF relative index for registers which expect this. Use this in ice_cfg_interrupt to look up the VF index from the q_vector. This allows removing the vector ID parameter of ice_cfg_interrupt. Also notice that this function returns an int, but then is cast to the virtchnl error enumeration, virtchnl_status_code. Update the return type to indicate it does not return an integer error code. We can't use normal error codes here because the return values are passed across the virtchnl interface. This will allow the future Scalable IOV VFs to correctly look up the index needed for programming the VF queues without breaking SR-IOV. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12ice: set vf->num_msix in ice_initialize_vf_entry()Jacob Keller
Commit fe1c5ca2fe76 ("ice: implement num_msix field per VF") updated the driver to allow for per-VF MSI-X configuration. The initial defaults were set in ice_create_vf_entries(). This logic is better placed in ice_initialize_vf_entry(). Indeed, that function already sets vf->num_vf_qs, as well as initializes the allow list via calling ice_vc_set_default_allowlist(). Move this logic into ice_initialize_vf_entry(). This makes the code clear, and ensures that these VF fields will be initialized properly for both SR-IOV VFs and the upcoming Scalable IOV VFs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12ice: Implement 'flow-type ether' rulesJakub Buchocki
Add support for 'flow-type ether' Flow Director rules via ethtool. Create packet segment info for filter configuration based on ethtool command parameters. Reuse infrastructure already created for ipv4 and ipv6 flows to convert packet segment into extraction sequence, which is later used to program the filter inside Flow Director block of the Rx pipeline. Rules not containing masks are processed by the Flow Director, and support the following set of input parameters in all combinations: src, dst, proto, vlan-etype, vlan, action. It is possible to specify address mask in ethtool parameters but only 00:00:00:00:00 and FF:FF:FF:FF:FF are valid. The same applies to proto, vlan-etype and vlan masks: only 0x0000 and 0xffff masks are valid. Testing: (DUT) iperf3 -s (DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \ action 10 (DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue' (LP) iperf3 -c ${DUT_IP} Counters increase only for: 'rx_queue_10_packets' 'rx_queue_10_bytes' Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com> Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12ice: Remove unnecessary argument from ice_fdir_comp_rules()Lukasz Plachno
Passing v6 argument is unnecessary as flow_type is still analyzed inside the function. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/ip_gre.c 17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head") 5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps") https://lore.kernel.org/all/20240402103253.3b54a1cf@canb.auug.org.au/ Adjacent changes: net/ipv6/ip6_fib.c d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().") 5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03ice: fix enabling RX VLAN filteringPetr Oros
ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice: implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns ena_rx_filtering to inner_vlan_ops in DVM mode. This causes an error when rx_filtering cannot be enabled in legacy mode. Reproducer: echo 1 > /sys/class/net/$PF/device/sriov_numvfs ip link set $PF vf 0 spoofchk off trust on vlan 3 dmesg: ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95 Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-03ice: Fix freeing uninitialized pointersDan Carpenter
Automatically cleaned up pointers need to be initialized before exiting their scope. In this case, they need to be initialized to NULL before any return statement. Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-02Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-01 (ice) This series contains updates to ice driver only. Michal Schmidt changes flow for gettimex64 to use host-side spinlock rather than hardware semaphore for lighter-weight locking. Steven adds ability for switch recipes to be re-used when firmware supports it. Thorsten Blum removes unwanted newlines in netlink messaging. Michal Swiatkowski and Piotr re-organize devlink related code; renaming, moving, and consolidating it to a single location. Michal also simplifies the devlink init and cleanup path to occur under a single lock call. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: hold devlink lock for whole init/cleanup ice: move devlink port code to a separate file ice: move ice_devlink.[ch] to devlink folder ice: Remove newlines in NL_SET_ERR_MSG_MOD ice: Add switch recipe reusing feature ice: fold ice_ptp_read_time into ice_ptp_gettimex64 ice: avoid the PTP hardware semaphore in gettimex64 path ice: add ice_adapter for shared data across PFs on the same NIC ==================== Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-29 (net: intel) This series contains updates to most Intel drivers. Jesse moves declaration of pci_driver struct to remove need for forward declarations in igb and converts Intel drivers to user newer power management ops. Sasha reworks power management flow on igc to avoid using rtnl_lock() during those flows. Maciej reorganizes i40e_nvm file to avoid forward declarations. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: avoid forward declarations in i40e_nvm.c igc: Refactor runtime power management flow net: intel: implement modern PM ops declarations igb: simplify pci ops declaration ==================== Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01ice: hold devlink lock for whole init/cleanupMichal Swiatkowski
Simplify devlink lock code in driver by taking it for whole init/cleanup path. Instead of calling devlink functions that taking lock call the lockless versions. Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move devlink port code to a separate filePiotr Raczynski
Keep devlink related code in a separate file. More devlink port code and handlers will be added here for other port operations. Remove no longer needed include of our devlink.h in ice_lib.c. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move ice_devlink.[ch] to devlink folderMichal Swiatkowski
Only moving whole files, fixing Makefile and bunch of includes. Some changes to ice_devlink file was done even in representor part (Tx topology), so keep it as final patch to not mess up with rebasing. After moving to devlink folder there is no need to have such long name for these files. Rename them to simple devlink. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: Remove newlines in NL_SET_ERR_MSG_MODThorsten Blum
Fixes Coccinelle/coccicheck warnings reported by newline_in_nl_msg.cocci. Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: Add switch recipe reusing featureSteven Zou
New E810 firmware supports the corresponding functionality, so the driver allows PFs to subscribe the same switch recipes. Then when the PF is done with a switch recipes, the PF can ask firmware to free that switch recipe. When users configure a rule to PFn into E810 switch component, if there is no existing recipe matching this rule's pattern, the driver will request firmware to allocate and return a new recipe resource for the rule by calling ice_add_sw_recipe() and ice_alloc_recipe(). If there is an existing recipe matching this rule's pattern with different key value, or this is a same second rule to PFm into switch component, the driver checks out this recipe by calling ice_find_recp(), the driver will tell firmware to share using this same recipe resource by calling ice_subscribable_recp_shared() and ice_subscribe_recipe(). When firmware detects that all subscribing PFs have freed the switch recipe, firmware will free the switch recipe so that it can be reused. This feature also fixes a problem where all switch recipes would eventually be exhausted because switch recipes could not be freed, as freeing a shared recipe could potentially break other PFs that were using it. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steven Zou <steven.zou@intel.com> Tested-by: Mayank Sharma <mayank.sharma@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: fold ice_ptp_read_time into ice_ptp_gettimex64Michal Schmidt
This is a cleanup. It is unnecessary to have this function just to call another function. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: avoid the PTP hardware semaphore in gettimex64 pathMichal Schmidt
The PTP hardware semaphore (PFTSYN_SEM) is used to synchronize operations that program the PTP timers. The operations involve issuing commands to the sideband queue. The E810 does not have a hardware sideband queue, so the admin queue is used. The admin queue is slow. I have observed delays in hundreds of milliseconds waiting for ice_sq_done. When phc2sys reads the time from the ice PTP clock and PFTSYN_SEM is held by a task performing one of the slow operations, ice_ptp_lock can easily time out. phc2sys gets -EBUSY and the kernel prints: ice 0000:XX:YY.0: PTP failed to get time These messages appear once every few seconds, causing log spam. The E810 datasheet recommends an algorithm for reading the upper 64 bits of the GLTSYN_TIME register. It matches what's implemented in ice_ptp_read_src_clk_reg. It is robust against wrap-around, but not necessarily against the concurrent setting of the register (with GLTSYN_CMD_{INIT,ADJ}_TIME commands). Perhaps that's why ice_ptp_gettimex64 also takes PFTSYN_SEM. The race with time setters can be prevented without relying on the PTP hardware semaphore. Using the "ice_adapter" from the previous patch, we can have a common spinlock for the PFs that share the clock hardware. It will protect the reading and writing to the GLTSYN_TIME register. The writing is performed indirectly, by the hardware, as a result of the driver writing GLTSYN_CMD_SYNC in ice_ptp_exec_tmr_cmd. I wasn't sure if the ice_flush there is enough to make sure GLTSYN_TIME has been updated, but it works well in my testing. My test code can be seen here: https://gitlab.com/mschmidt2/linux/-/commits/ice-ptp-host-side-lock-10 It consists of: - kernel threads reading the time in a busy loop and looking at the deltas between consecutive values, reporting new maxima. - a shell script that sets the time repeatedly; - a bpftrace probe to produce a histogram of the measured deltas. Without the spinlock ptp_gltsyn_time_lock, it is easy to see tearing. Deltas in the [2G, 4G) range appear in the histograms. With the spinlock added, there is no tearing and the biggest delta I saw was in the range [1M, 2M), that is under 2 ms. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: add ice_adapter for shared data across PFs on the same NICMichal Schmidt
There is a need for synchronization between ice PFs on the same physical adapter. Add a "struct ice_adapter" for holding data shared between PFs of the same multifunction PCI device. The struct is refcounted - each ice_pf holds a reference to it. Its first use will be for PTP. I expect it will be useful also to improve the ugliness that is ice_prot_id_tbl. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: Add support for PFCP hardware offload in switchdevMarcin Szycik
Add support for creating PFCP filters in switchdev mode. Add support for parsing PFCP-specific tc options: S flag and SEID. To create a PFCP filter, a special netdev must be created and passed to tc command: ip link add pfcp0 type pfcp tc filter add dev eth0 ingress prio 1 flower pfcp_opts \ 1:123/ff:fffffffffffffff0 skip_hw action mirred egress redirect \ dev pfcp0 Changes in iproute2 [1] are required to be able to use pfcp_opts in tc. ICE COMMS package is required to create a filter as it contains PFCP profiles. Link: https://lore.kernel.org/netdev/20230614091758.11180-1-marcin.szycik@linux.intel.com [1] Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-01ice: refactor ICE_TC_FLWR_FIELD_ENC_OPTSMarcin Szycik
FLOW_DISSECTOR_KEY_ENC_OPTS can be used for multiple headers, but currently it is treated as GTP-exclusive in ice. Rename ICE_TC_FLWR_FIELD_ENC_OPTS to ICE_TC_FLWR_FIELD_GTP_OPTS and check for tunnel type earlier. After this refactor, it is easier to add new headers using FLOW_DISSECTOR_KEY_ENC_OPTS - instead of checking tunnel type in ice_tc_count_lkups() and ice_tc_fill_tunnel_outer(), it needs to be checked only once, in ice_parse_tunnel_attr(). Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-28Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: use less resources in switchdev Michal Swiatkowski says: Switchdev is using one queue per created port representor. This can quickly lead to Rx queue shortage, as with subfunction support user can create high number of PRs. Save one MSI-X and 'number of PRs' * 1 queues. Refactor switchdev slow-path to use less resources (even no additional resources). Do this by removing control plane VSI and move its functionality to PF VSI. Even with current solution PF is acting like uplink and can't be used simultaneously for other use cases (adding filters can break slow-path). In short, do Tx via PF VSI and Rx packets using PF resources. Rx needs additional code in interrupt handler to choose correct PR netdev. Previous solution had to queue filters, it was way more elegant but needed one queue per PRs. Beside that this refactor mostly simplifies switchdev configuration. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: count representor stats ice: do switchdev slow-path Rx using PF VSI ice: change repr::id values ice: remove switchdev control plane VSI ice: control default Tx rule in lag ice: default Tx rule instead of to queue ice: do Tx through PF netdev in slow-path ice: remove eswitch changing queues algorithm ==================== Link: https://lore.kernel.org/r/20240325202623.1012287-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28net: remove gfp_mask from napi_alloc_skb()Jakub Kicinski
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is implied. The only practical choice the caller has is whether to set __GFP_NOWARN. But that's a false choice, too, allocation failures in atomic context will happen, and printing warnings in logs, effectively for a packet drop, is both too much and very likely non-actionable. This leads me to a conclusion that most uses of napi_alloc_skb() are simply misguided, and should use __GFP_NOWARN in the first place. We also have a "standard" way of reporting allocation failures via the queue stat API (qstats::rx-alloc-fail). The direct motivation for this patch is that one of the drivers used at Meta calls napi_alloc_skb() (so prior to this patch without __GFP_NOWARN), and the resulting OOM warning is the top networking warning in our fleet. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28Merge tag 'net-6.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, WiFi and netfilter. Current release - regressions: - ipv6: fix address dump when IPv6 is disabled on an interface Current release - new code bugs: - bpf: temporarily disable atomic operations in BPF arena - nexthop: fix uninitialized variable in nla_put_nh_group_stats() Previous releases - regressions: - bpf: protect against int overflow for stack access size - hsr: fix the promiscuous mode in offload mode - wifi: don't always use FW dump trig - tls: adjust recv return with async crypto and failed copy to userspace - tcp: properly terminate timers for kernel sockets - ice: fix memory corruption bug with suspend and rebuild - at803x: fix kernel panic with at8031_probe - qeth: handle deferred cc1 Previous releases - always broken: - bpf: fix bug in BPF_LDX_MEMSX - netfilter: reject table flag and netdev basechain updates - inet_defrag: prevent sk release while still in use - wifi: pick the version of SESSION_PROTECTION_NOTIF - wwan: t7xx: split 64bit accesses to fix alignment issues - mlxbf_gige: call request_irq() after NAPI initialized - hns3: fix kernel crash when devlink reload during pf initialization" * tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) inet: inet_defrag: prevent sk release while still in use Octeontx2-af: fix pause frame configuration in GMP mode net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips net: bcmasp: Remove phy_{suspend/resume} net: bcmasp: Bring up unimac after PHY link up net: phy: qcom: at803x: fix kernel panic with at8031_probe netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c netfilter: nf_tables: skip netdev hook unregistration if table is dormant netfilter: nf_tables: reject table flag and netdev basechain updates netfilter: nf_tables: reject destroy command to remove basechain hooks bpf: update BPF LSM designated reviewer list bpf: Protect against int overflow for stack access size bpf: Check bloom filter map value size bpf: fix warning for crash_kexec selftests: netdevsim: set test timeout to 10 minutes net: wan: framer: Add missing static inline qualifiers mlxbf_gige: call request_irq() after NAPI initialized tls: get psock ref after taking rxlock to avoid leak selftests: tls: add test with a partially invalid iov tls: adjust recv return with async crypto and failed copy to userspace ...
2024-03-25ice: count representor statsMichal Swiatkowski
Removing control plane VSI result in no information about slow-path statistic. In current solution statistics need to be counted in driver. Patch is based on similar implementation done by Simon Horman in nfp: commit eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't (and shouldn't be) modified in the function. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: do switchdev slow-path Rx using PF VSIMichal Swiatkowski
Add an ICE_RX_FLAG_MULTIDEV flag to Rx ring. If it is set try to find correct port representor. Do it based on src_vsi value stored in flex descriptor. Ids of representor pointers stored in xarray are equal to corresponding src_vsi value. Thanks to that we can directly get correct representor if we have src_vsi value. Set multidev flag during ring configuration. If the mode is switchdev, change the ring descriptor to the one that contains src_vsi value. PF netdev should be reconfigured, do it by calling ice_down() and ice_up() if the netdev was up before configuring switchdev. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: change repr::id valuesMichal Swiatkowski
Instead of getting repr::id from xa_alloc() value, set it to the src_vsi::num_vsi value. It is unique for each PR. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove switchdev control plane VSIMichal Swiatkowski
For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: control default Tx rule in lagMichal Swiatkowski
Tx rule in switchdev was changed to use PF instead of additional control plane VSI. Because of that during lag we should control it. Control means to add and remove the default Tx rule during lag active/inactive switching. It can be done the same way as default Rx rule. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: default Tx rule instead of to queueMichal Swiatkowski
Steer all packets that miss other rules to PF VSI. Previously in switchdev mode, PF VSI received missed packets, but only ones marked as Rx. Now it is receiving all missed packets. To queue rule per PR isn't needed, because we use PF VSI instead of control VSI now, and it's already correctly configured. Add flag to correctly set LAN_EN bit in default Tx rule. It shouldn't allow packet to go outside when there is a match. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: do Tx through PF netdev in slow-pathMichal Swiatkowski
Tx can be done using PF netdev. Checks before Tx are unnecessary. Checking if switchdev mode is set seems too defensive (there is no PR netdev in legacy mode). If corresponding VF is disabled or during reset, PR netdev also should be down. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove eswitch changing queues algorithmMichal Swiatkowski
Changing queues used by eswitch will be done through PF netdev. There is no need to reserve queues if the number of used queues is known. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: fix memory corruption bug with suspend and rebuildJesse Brandeburg
The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.418614] ice_vsi_rebuild+0x34b/0x3c0 [ice] [1026677.423583] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [1026677.429147] ice_rebuild+0x18b/0x520 [ice] [1026677.433746] ? delay_tsc+0x8f/0xc0 [1026677.437630] ice_do_reset+0xa3/0x190 [ice] [1026677.442231] ice_service_task+0x26/0x440 [ice] [1026677.447180] process_one_work+0x174/0x340 [1026677.451669] worker_thread+0x27e/0x390 [1026677.455890] ? __pfx_worker_thread+0x10/0x10 [1026677.460627] kthread+0xee/0x120 [1026677.464235] ? __pfx_kthread+0x10/0x10 [1026677.468445] ret_from_fork+0x2d/0x50 [1026677.472476] ? __pfx_kthread+0x10/0x10 [1026677.476671] ret_from_fork_asm+0x1b/0x30 [1026677.481050] </TASK> Fixes: b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: Refactor FW data type and fix bitmap casting issueSteven Zou
According to the datasheet, the recipe association data is an 8-byte little-endian value. It is described as 'Bitmap of the recipe indexes associated with this profile', it is from 24 to 31 byte area in FW. Therefore, it is defined to '__le64 recipe_assoc' in struct ice_aqc_recipe_to_profile. And then fix the bitmap casting issue, as we must never ever use castings for bitmap type. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steven Zou <steven.zou@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-22overflow: Change DEFINE_FLEX to take __counted_by memberKees Cook
The norm should be flexible array structures with __counted_by annotations, so DEFINE_FLEX() is updated to expect that. Rename the non-annotated version to DEFINE_RAW_FLEX(), and update the few existing users. Additionally add selftests for the macros. Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-07net: introduce include/net/rps.hEric Dumazet
Move RPS related structures and helpers from include/linux/netdevice.h and include/net/sock.h to a new include file. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-17 21:56:55 +0000