summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)Author
2023-12-05ice: Restore fix disabling RX VLAN filteringMarcin Szycik
Fix setting dis_rx_filtering depending on whether port vlan is being turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice: Fix disabling Rx VLAN filtering with port VLAN enabled"), but while refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the fix along with the original comment from that change. Also delete duplicate lines in ice_port_vlan_on(). Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05ice: change vfs.num_msix_per to vf->num_msixMichal Swiatkowski
vfs::num_msix_per should be only used as default value for vf->num_msix. For other use cases vf->num_msix should be used, as VF can have different MSI-X amount values. Fix incorrect register index calculation. vfs::num_msix_per and pf->sriov_base_vector shouldn't be used after implementation of changing MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it is storing value for first irq index. Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05ice: Rename E822 to E82XKarol Kolacinski
When code is applicable for both E822 and E823 devices, rename it from E822 to E82X. ICE_PHY_PER_NAC_E822 was unused, so just remove it. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: periodically kick Tx timestamp interruptJacob Keller
The E822 hardware for Tx timestamping keeps track of how many outstanding timestamps are still in the PHY memory block. It will not generate a new interrupt to the MAC until all of the timestamps in the region have been read. If somehow all the available data is not read, but the driver has exited its interrupt routine already, the PHY will not generate a new interrupt even if new timestamp data is captured. Because no interrupt is generated, the driver never processes the timestamp data. This state results in a permanent failure for all future Tx timestamps. It is not clear how the driver and hardware could enter this state. However, if it does, there is currently no recovery mechanism. Add a recovery mechanism via the periodic PTP work thread which invokes ice_ptp_periodic_work(). Introduce a new check, ice_ptp_maybe_trigger_tx_interrupt() which checks the PHY timestamp ready bitmask. If any bits are set, trigger a software interrupt by writing to PFINT_OICR. Once triggered, the main timestamp processing thread will read through the PHY data and clear the outstanding timestamp data. Once cleared, new data should trigger interrupts as expected. This should allow recovery from such a state rather than leaving the device in a state where we cannot process Tx timestamps. It is possible that this function checks for timestamp data simultaneously with the interrupt, and it might trigger additional unnecessary interrupts. This will cause a small amount of additional processing. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: Re-enable timestamping correctly after resetKarol Kolacinski
During reset, TX_TSYN interrupt should be processed as it may process timestamps in brief moments before and after reset. Timestamping should be enabled on VSIs at the end of reset procedure. On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed because error only happens on resets. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: Improve logs for max ntuple errorsPawel Kaminski
Supported number of ntuple filters affect also maximum location value that can be provided to ethtool command. Update error message to provide info about max supported value. Fix double spaces in the error messages. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: add CGU info to devlink info callbackArkadiusz Kubalewski
If Clock Generation Unit is present on NIC board user shall know its details. Provide the devlink info callback with a new: - fixed type object (cgu.id) indicating hardware variant of onboard CGU, - running type object (fw.cgu) consisting of CGU id, config and firmware versions. These information shall be known for debugging purposes. Test (on NIC board with CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu cgu.id 36 fw.cgu 8032.16973825.6021 Test (on NIC board without CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu -c 0 Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: read internal temperature sensorKonrad Knitter
Since 4.30 firmware exposes internal thermal sensor reading via admin queue commands. Expose those readouts via hwmon API when supported. Datasheet: Get Sensor Reading Command (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer. | | Return value | 6-7 | | Return value. | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor | 16 | | 0x00: Internal temp | | | | | 0x01-0xFF: Reserved. | | Format | 17 | Requested response | Only 0x00 is supported. | | | | format | 0x01-0xFF: Reserved. | | Reserved | 18-23 | | | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Get Sensor Reading Response (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer | | Return value | 6-7 | | Return value. | | | | | EINVAL: Invalid | | | | | parameters | | | | | ENOENT: Unsupported | | | | | sensor | | | | | EIO: Sensor access | | | | | error | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor Reading | 16-23 | | Format of the reading | | | | | is dependent on request | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Sensor Reading for Sensor 0x00 (Internal Chip Temperature): +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Thermal Sensor | 0 | | Reading in degrees | | reading | | | Celsius. Signed int8 | | Warning High | 1 | | Warning High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Critical High | 2 | | Critical High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Fatal High | 3 | | Fatal High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Reserved | 4-7 | | | +--------------------+--------+--------------------+-------------------------+ Driver provides current reading from HW as well as device specific thresholds for thermal alarm (Warning, Critical, Fatal) events. $ sensors Output ========================================================= ice-pci-b100 Adapter: PCI adapter temp1: +62.0°C (high = +95.0°C, crit = +105.0°C) (emerg = +115.0°C) Tested on Intel Corporation Ethernet Controller E810-C for SFP Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com> Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com> Co-developed-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-04net: Add NAPI IRQ supportAmritha Nambiar
Add support to associate the interrupt vector number for a NAPI instance. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147334728.5260.13221803396905901904.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04ice: Add support in the driver for associating queue with napiAmritha Nambiar
After the napi context is initialized, map the napi instance with the queue/queue-set on the corresponding irq line. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147332060.5260.13310934657151560599.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29ice: Fix VF Reset paths when interface in a failed over aggregateDave Ertman
There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28ice: fix error code in ice_eswitch_attach()Dan Carpenter
Set the "err" variable on this error path. Fixes: fff292b47ac1 ("ice: add VF representors one by one") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/e0349ee5-76e6-4ff4-812f-4aa0d3f76ae7@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-18Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: one by one port representors creation Michal Swiatkowski says: Currently ice supports creating port representors only for VFs. For that use case they can be created and removed in one step. This patchset is refactoring current flow to support port representor creation also for subfunctions and SIOV. In this case port representors need to be created and removed one by one. Also, they can be added and removed while other port representors are running. To achieve that we need to change the switchdev configuration flow. Three first patches are only cosmetic (renaming, removing not used code). Next few ones are preparation for new flow. The most important one is "add VF representor one by one". It fully implements new flow. New type of port representor (for subfunction) will be introduced in follow up patchset. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: reserve number of CP queues ice: adjust switchdev rebuild path ice: add VF representors one by one ice: realloc VSI stats arrays ice: set Tx topology every time new repr is added ice: allow changing SWITCHDEV_CTRL VSI queues ice: return pointer to representor ice: make representor code generic ice: remove VF pointer reference in eswitch code ice: track port representors in xarray ice: use repr instead of vf->repr ice: track q_id in representor ice: remove unused control VSI parameter ice: remove redundant max_vsi_num variable ice: rename switchdev to eswitch ==================== Link: https://lore.kernel.org/r/20231114181449.1290117-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13ice: reserve number of CP queuesMichal Swiatkowski
Rebuilding CP VSI each time the PR is created drastically increase the time of maximum VFs creation. Add function to reserve number of CP queues to deal with this problem. Use the same function to decrease number of queues in case of removing VFs. Assume that caller of ice_eswitch_reserve_cp_queues() will also call ice_eswitch_attach/detach() correct number of times. Still one by one PR adding is handy for VF resetting routine. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: adjust switchdev rebuild pathMichal Swiatkowski
There is no need to use specific functions for rebuilding path. Let's use current implementation by removing all representors and as the result remove switchdev environment. It will be added in devices rebuild path. For example during adding VFs, port representors for them also will be created. Rebuild control plane VSI before removing representors with INIT_VSI flag set to reinit VSI in hardware after reset. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: add VF representors one by oneMichal Swiatkowski
Implement adding representors one by one. Always set switchdev environment when first representor is being added and clear environment when last one is being removed. Basic switchdev configuration remains the same. Code related to creating and configuring representor was changed. Instead of setting whole representors in one function handle only one representor in setup function. The same with removing representors. Stop representors when new one is being added or removed. Stop means, disabling napi, stopping traffic and removing slow path rule. It is needed because ::q_id will change after remapping, so each representor will need new rule. When representor are stopped rebuild control plane VSI with one more or one less queue. One more if new representor is being added, one less if representor is being removed. Bridge port is removed during unregister_netdev() call on PR, so there is no need to call it from driver side. After that do remap new queues to correct vector. At the end start all representors (napi enable, start queues, add slow path rule). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: realloc VSI stats arraysMichal Swiatkowski
Previously only case when queues amount is lower was covered. Implement realloc for case when queues amount is higher than previous one. Use krealloc() function and zero new allocated elements. It has to be done before ice_vsi_def_cfg(), because stats element for ring is set there. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: set Tx topology every time new repr is addedMichal Swiatkowski
It is needed to track correct Tx topology. Update it every time new representor is created or remove node in case of removing corresponding representor. Still clear all node when removing switchdev mode as part of Tx topology isn't related only to representors. Also clear ::rate_note value to prevent skipping this node next time Tx topology is created. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: allow changing SWITCHDEV_CTRL VSI queuesMichal Swiatkowski
Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI type. Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after calling ice_vsi_rebuild(). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: return pointer to representorMichal Swiatkowski
In follow up patches it will be easier to obtain created port representor pointer instead of the id. Without it the pattern from eswitch side will look like: - create PR - get PR based on the id Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: make representor code genericMichal Swiatkowski
Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove VF pointer reference in eswitch codeMichal Swiatkowski
Make eswitch code generic by removing VF pointer reference in functions. It is needed to support eswitch mode for other type of devices. Previously queue id used for Rx was based on VF number. Use ::q_id saved in port representor instead. After adding or removing port representor ::q_id value can change. It isn't good idea to iterate over representors list using this value. Use xa_find starting from the first one instead to get next port representor to remap. The number of port representors has to be equal to ::num_rx/tx_q. Warn if it isn't true. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track port representors in xarrayMichal Swiatkowski
Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: use repr instead of vf->reprMichal Swiatkowski
Extract repr from vf->repr as it is often use in the ice_repr_rem(). Remove meaningless clearing of q_vector and netdev pointers as kfree is called on repr pointer. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track q_id in representorMichal Swiatkowski
Previously queue index of control plane VSI used by port representor was always id of VF. If we want to allow adding port representors for different devices we have to track queue index in the port representor structure. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove unused control VSI parameterMichal Swiatkowski
It isn't used in ice_eswitch_release_reprs(). Probably leftover. Remove it. Commit that has removed usage of ctrl_vsi: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove redundant max_vsi_num variableMichal Swiatkowski
It is a leftover from previous implementation. Accidentally it wasn't removed. Do it now. Commit that has removed it: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: rename switchdev to eswitchMichal Swiatkowski
Eswitch is used as a prefix for related functions. Main structure storing all data related to eswitch should also be named as eswitch instead of ice_switchdev_info. Rename it. Also rename switchdev to eswitch where the context is not about eswitch mode. ::uplink_netdev was changed to netdev for simplicity. There is no other netdev in function scope so it is obvious. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: fix DDP package download for packages without signature segmentDan Nowlin
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix output pin capabilitiesArkadiusz Kubalewski
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix check for dpll input priority rangeArkadiusz Kubalewski
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix initial lock status of dpllArkadiusz Kubalewski
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: Fix VF-VF direction matching in drop rule in switchdevMarcin Szycik
When adding a drop rule on a VF, rule direction is not being set, which results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS equals 0). Because of this, drop rules added on port representors don't match any packets. To fix it, set rule direction in drop action to egress when netdev is a port representor, otherwise set it to ingress. Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: Fix VF-VF filter rules in switchdev modeAniruddha Paul
Any packet leaving VSI i.e VF's VSI is considered as egress traffic by HW, thus failing to match the added rule. Mark the direction for redirect rules as below: 1. VF-VF - Egress 2. Uplink-VF - Ingress 3. VF-Uplink - Egress 4. Link_Partner-Uplink - Ingress 5. Link_Partner-VF - Ingress Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: lag: in RCU, use atomic allocationMichal Schmidt
Sleeping is not allowed in RCU read-side critical sections. Use atomic allocations under rcu_read_lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Fixes: 41ccedf5ca8f ("ice: implement lag netdev event handler") Fixes: 3579aa86fb40 ("ice: update reset path for SRIOV LAG support") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: Fix SRIOV LAG disable on non-compliant aggregateDave Ertman
If an attribute of an aggregate interface disqualifies it from supporting SRIOV, the driver will unwind the SRIOV support. Currently the driver is clearing the feature bit for all interfaces in the aggregate, but this is not allowing the other interfaces to unwind successfully on driver unload. Only clear the feature bit for the interface that is currently unwinding. Fixes: bf65da2eb279 ("ice: enforce interface eligibility and add messaging for SRIOV LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-26ice: Hook up 4 E830 devices by adding their IDsPawel Chmielewski
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Remove redundant zeroing of the fields.Pawel Chmielewski
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-6-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add support for E830 DDP package segmentDan Nowlin
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-5-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add ice_get_link_status_datalenPaul Greenwalt
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-4-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add 200G speed/phy type useAlice Michael
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add E830 device IDs, MAC type and registersPaul Greenwalt
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Scott Taylor <scott.w.taylor@intel.com> Signed-off-by: Scott Taylor <scott.w.taylor@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20ice: cleanup ice_find_netlist_nodeJacob Keller
The ice_find_netlist_node function was introduced in commit 8a3a565ff210 ("ice: add admin commands to access cgu configuration"). Variations of this function were reviewed concurrently on both intel-wired-lan[1][2], and netdev [3][4] [1]: https://lore.kernel.org/intel-wired-lan/20230913204943.1051233-7-vadim.fedorenko@linux.dev/ [2]: https://lore.kernel.org/intel-wired-lan/20230817000058.2433236-5-jacob.e.keller@intel.com/ [3]: https://lore.kernel.org/netdev/20230918212814.435688-1-anthony.l.nguyen@intel.com/ [4]: https://lore.kernel.org/netdev/20230913204943.1051233-7-vadim.fedorenko@linux.dev/ The variant I posted had a few changes due to review feedback which were never incorporated into the DPLL series: * Replace the references to ancient and long removed ICE_SUCCESS and ICE_ERR_DOES_NOT_EXIST status codes in the function comment. * Return -ENOENT instead of -ENOTBLK, as a more common way to indicate that an entry doesn't exist. * Avoid the use of memset() and use simple static initialization for the cmd variable. * Use FIELD_PREP to assign the node_type_ctx. * Remove an unnecessary local variable to keep track of rec_node_handle, just pass the node_handle pointer directly into ice_aq_get_netlist_node. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20ice: make ice_get_pf_c827_idx staticJacob Keller
The ice_get_pf_c827_idx function is only called inside of ice_ptp_hw.c, so there is no reason to export it. Mark it static and remove the declaration from ice_ptp_hw.h Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20ice: manage VFs MSI-X using resource trackingMichal Swiatkowski
Track MSI-X for VFs using bitmap, by setting and clearing bitmap during allocation and freeing. Try to linearize irqs usage for VFs, by freeing them and allocating once again. Do it only for VFs that aren't currently running. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 02:49:14 +0000