summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)Author
2023-04-10net: piggy back on the memory barrier in bql when waking queuesJakub Kicinski
Drivers call netdev_tx_completed_queue() right before netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue() should issue a memory barrier, so we can depend on that separating the stop check from the consumer index update, instead of adding another barrier in netif_txq_maybe_wake(). This matters more than the barriers on the xmit path, because the wake condition is almost always true. So we issue the consumer side barrier often. Wrap netdev_tx_completed_queue() in a local helper to issue the barrier even if BQL is disabled. Keep the same semantics as netdev_tx_completed_queue() (barrier only if bytes != 0) to make it clear that the barrier is conditional. Plus since macro gets pkt/byte counts as arguments now - we can skip waking if there were no packets completed. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-10ixgbe: use new queue try_stop/try_wake macrosJakub Kicinski
Convert ixgbe to use the new macros, I think a lot of people copy the ixgbe code. The only functional change is that the unlikely() in ixgbe_clean_tx_irq() turns into a likely() inside the new macro and no longer includes total_packets && netif_carrier_ok(tx_ring->netdev) which is probably for the best, anyway. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08ixgbe: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-14ixgbe: add double of VLAN header when computing the max MTUJason Xing
Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-14ixgbe: allow to increase MTU to 3K with XDP enabledJason Xing
Recently I encountered one case where I cannot increase the MTU size directly from 1500 to a much bigger value with XDP enabled if the server is equipped with IXGBE card, which happened on thousands of servers in production environment. After applying the current patch, we can set the maximum MTU size to 3K. This patch follows the behavior of changing MTU as i40e/ice does. References: [1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP") [2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-10Daniel Borkmann says:Jakub Kicinski
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-30ixgbe: Remove redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this doesn't control interrupt generation by the Root Port; that is controlled by the AER Root Error Command register, which is managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-26ixgbe: fill IPsec state validation failure reasonLeon Romanovsky
Rely on extack to return failure reason. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-26xfrm: extend add state callback to set failure reasonLeon Romanovsky
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17ixgbe: Use C45 mdiobus accessorsAndrew Lunn
When performing a C45 bus transaction, make use of the c45 variants of the bus read/write helpers. The ability to pass a special register value is being removed to clean up the mdio bus driver API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17ixgbe: Separate C22 and C45 transactionsAndrew Lunn
The ixgbe MDIO bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13ixgbe: Filter out spurious link up indicationSebastian Czapla
Add delayed link state recheck to filter false link up indication caused by transceiver with no fiber cable attached. Signed-off-by: Sebastian Czapla <sebastianx.czapla@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-13ixgbe: XDP: fix checker warning from rcu pointerJesse Brandeburg
The ixgbe driver uses an older style failure mode when initializing the XDP program and the queues. It causes some warnings when running C=2 checking builds (and it's the last one in the ethernet/intel tree). $ make W=1 C=2 M=`pwd`/drivers/net/ethernet/intel modules .../ixgbe_main.c:10301:25: error: incompatible types in comparison expression (different address spaces): .../ixgbe_main.c:10301:25: struct bpf_prog [noderef] __rcu * .../ixgbe_main.c:10301:25: struct bpf_prog * Fix the problem by removing the line that tried to re-xchg "the old_prog pointer" if there was an error, to make this driver act like the other drivers which return the error code without "pointer restoration." Also, update the "copy the pointer" logic to use WRITE_ONCE as many/all the other drivers do, which required making a change in two separate functions that write the xdp_prog variable in the ring. The code here was modeled after the code in i40e/i40e_xdp_setup(). NOTE: Compile-tested only. CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> CC: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10ixgbe: fix pci device refcount leakYang Yingliang
As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-05xfrm: allow state packet offload modeLeon Romanovsky
Allow users to configure xfrm states with packet offload mode. The packet mode must be requested both for policy and state, and such requires us to do not implement fallback. We explicitly return an error if requested packet mode can't be configured. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-04ixgbe: Remove unneeded semicolonYang Li
./drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c:1305:2-3: Unneeded semicolon Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2688 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-04ixgbe: Remove local variableAnirudh Venkataramanan
Remove local variable "match" and directly return evaluated conditional instead. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-04ixgbe: change MAX_RXD/MAX_TXD based on adapter typeDaniel Willenson
Set the length limit for the receive descriptor buffer and transmit descriptor buffer based on the controller type. The values used are called out in the controller datasheets as a 'Note:' in the RDLEN and TDLEN register descriptions. This allows the user to use ethtool to allocate larger descriptor buffers in the case where data is received or transmitted too quickly for the driver to keep up. Signed-off-by: Daniel Willenson <daniel@veobot.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-31ptp: introduce helpers to adjust by scaled parts per millionJacob Keller
Many drivers implement the .adjfreq or .adjfine PTP op function with the same basic logic: 1. Determine a base frequency value 2. Multiply this by the abs() of the requested adjustment, then divide by the appropriate divisor (1 billion, or 65,536 billion). 3. Add or subtract this difference from the base frequency to calculate a new adjustment. A few drivers need the difference and direction rather than the combined new increment value. I recently converted the Intel drivers to .adjfine and the scaled parts per million (65.536 parts per billion) logic. To avoid overflow with minimal loss of precision, mul_u64_u64_div_u64 was used. The basic logic used by all of these drivers is very similar, and leads to a lot of duplicate code to perform the same task. Rather than keep this duplicate code, introduce diff_by_scaled_ppm and adjust_by_scaled_ppm. These helper functions calculate the difference or adjustment necessary based on the scaled parts per million input. The diff_by_scaled_ppm function returns true if the difference should be subtracted, and false otherwise. Update the Intel drivers to use the new helper functions. Other vendor drivers will be converted to .adjfine and this helper function in the following changes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounterJacob Keller
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ixgbe: Manual AN-37 for troublesome link partners for X550 SFIJeff Daly
Some (Juniper MX5) SFP link partners exhibit a disinclination to autonegotiate with X550 configured in SFI mode. This patch enables a manual AN-37 restart to work around the problem. Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ixgbe: Don't call kmap() on page allocated with GFP_ATOMICFabio M. De Francesco
Pages allocated with GFP_ATOMIC cannot come from Highmem. This is why there is no need to call kmap() on them. Therefore, don't call kmap() on rx_buffer->page() and instead use a plain page_address() to get the kernel address. Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ixgbe: convert .adjfreq to .adjfineJacob Keller
Convert the ixgbe PTP frequency adjustment implementations from .adjfreq to .adjfine. This allows using the scaled parts per million adjustment from the PTP core and results in a more precise adjustment for small corrections. To avoid overflow, use mul_u64_u64_div_u64 to perform the calculation. On X86 platforms, this will use instructions that perform the operations with 128bit intermediate values. For other architectures, the implementation will limit the loss of precision as much as possible. This change slightly improves the precision of frequency adjustments for all ixgbe based devices, and gets us one driver closer to being able to remove the older .adjfreq implementation from the kernel. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18ixgbe: Add locking to prevent panic when setting sriov_numvfs to zeroPiotr Skajewski
It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30ixgbe: drop unexpected word 'for' in commentsJiang Jian
there is an unexpected word 'for' in the comments that need to be dropped file - drivers/net/ethernet/intel/ixgbe/ixgbe_main.c line - 5164 * ixgbe_lpbthresh - calculate low water mark for for flow control changed to: * ixgbe_lpbthresh - calculate low water mark for flow control Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30ixgbe: remove unexpected word "the"Jiang Jian
there is an unexpected word "the" in the comments that need to be removed Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-10Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-06-09 Maximilian Heyne adds reporting of VF statistics on ixgbe via iproute2 interface. Kai-Heng Feng removes duplicate defines from igb. Jiaqing Zhao fixes typos in e1000, ixgb, and ixgbe drivers. Julia Lawall fixes typos for fm10k, ixgbe, and ice drivers. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: drivers/net/ethernet/intel: fix typos in comments ixgbe: Fix typos in comments ixgb: Fix typos in comments e1000: Fix typos in comments igb: Remove duplicate defines drivers, ixgbe: export vf statistics ==================== Link: https://lore.kernel.org/r/20220609171257.2727150-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09drivers/net/ethernet/intel: fix typos in commentsJulia Lawall
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09ixgbe: Fix typos in commentsJiaqing Zhao
"VLAN filter" was misspelled as "VLAN filer" in some comments. Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09drivers, ixgbe: export vf statisticsMaximilian Heyne
This change retrieves network metrics for virtual functions from the device and exports them via the iproute2 interface. The code for retrieving the statistics from the device is taken from the out-of-tree driver. The feature was introduced with version 2.0.75.7, so the diff between this version and the previous version 2.0.72.4 was used to identify required changes. The export via ethtool is omitted in favor of using the standard ndo_get_vf_stats interface. Per-VF statistics can now be printed, for instance, via ip --statistics link show dev eth0 Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-13ixgbe: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220512212621.3746140-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-05-13 1) Cleanups for the code behind the XFRM offload API. This is a preparation for the extension of the API for policy offload. From Leon Romanovsky. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: drop not needed flags variable in XFRM offload struct net/mlx5e: Use XFRM state direction instead of flags netdevsim: rely on XFRM state direction instead of flags ixgbe: propagate XFRM offload state direction instead of flags xfrm: store and rely on direction to construct offload flags xfrm: rename xfrm_state_offload struct to allow reuse xfrm: delete not used number of external headers xfrm: free not used XFRM_ESP_NO_TRAILER flag ==================== Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-05-05 This series contains updates to ixgbe and igb drivers. Jeff Daly adjusts type for 'allow_unsupported_sfp' to match the associated struct value for ixgbe. Alaa Mohamed converts, deprecated, kmap() call to kmap_local_page() for igb. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: Convert kmap() to kmap_local_page() ixgbe: Fix module_param allow_unsupported_sfp type ==================== Link: https://lore.kernel.org/r/20220505155651.2606195-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06ixgbe: propagate XFRM offload state direction instead of flagsLeon Romanovsky
Convert the ixgbe driver to rely on XFRM offload state direction instead of flags bits that were not checked at all. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-05ixgbe: Fix module_param allow_unsupported_sfp typeJeff Daly
The module_param allow_unsupported_sfp should be a boolean to match the type in the ixgbe_hw struct. Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-21ixgbe, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED} XDP_TX -> IXGBE_XDP_{TX,CONSUMED} XDP_DROP -> IXGBE_XDP_CONSUMED XDP_ABORTED -> IXGBE_XDP_CONSUMED XDP_PASS -> IXGBE_XDP_PASS Commit c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> IXGBE_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132126.471515-2-maciej.fijalkowski@intel.com
2022-04-15ixgbe, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in ixgbe's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-11-maciej.fijalkowski@intel.com
generated by cgit (git 2.34.1) at 2025-07-16 00:32:46 +0000