| Age | Commit message (Collapse) | Author |
|---|
|
Block HW write access for the driver while the device is in reset to
avoid potential race condition and access to the PTP HW in
non-nominal state which could lead to undesired effects
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Synchronize OICR IRQ when preparing for reset to avoid potential
race conditions between the reset procedure and OICR
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use
ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to
treat XDP ring that belongs to queue vector as Tx ring and therefore
misconfiguring the interrupts.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
xsk_buff_pool pointers that ice ring structs hold are updated via
ndo_bpf that is executed in process context while it can be read by
remote CPU at the same time within NAPI poll. Use synchronize_net()
after pointer update and {READ,WRITE}_ONCE() when working with mentioned
pointer.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"
* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
tun: add missing verification for short frame
tap: add missing verification for short frame
mISDN: Fix a use after free in hfcmulti_tx()
gve: Fix an edge case for TSO skb validity check
bnxt_en: update xdp_rxq_info in queue restart logic
tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
MAINTAINERS: make Breno the netconsole maintainer
MAINTAINERS: Update bonding entry
net: nexthop: Initialize all fields in dumped nexthops
net: stmmac: Correct byte order of perfect_match
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
tipc: Return non-zero value from tipc_udp_addr2str() on error
netfilter: nft_set_pipapo_avx2: disable softinterrupts
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
net: bonding: correctly annotate RCU in bond_should_notify_peers()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
When ice driver reads recipes from firmware information about
need_pass_l2 and allow_pass_l2 flags is not stored correctly.
Those flags are stored as one bit each in ice_sw_recipe structure.
Because of that, the result of checking a flag has to be casted to bool.
Note that the need_pass_l2 flag currently works correctly, because
it's stored in the first bit.
Fixes: bccd9bce29e0 ("ice: Add guard rule when creating FDB in switchdev")
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice.
CC: stable@vger.kernel.org
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
|
First part of "net: Make timestamping selectable" from Kory Maincent.
Change the driver-facing type already to lower rebasing pain.
Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: Switch API optimizations
Marcin Szycik says:
Optimize the process of creating a recipe in the switch block by removing
duplicate switch ID words and changing how result indexes are fitted into
recipes. In many cases this can decrease the number of recipes required to
add a certain set of rules, potentially allowing a more varied set of rules
to be created. Total rule count will also increase, since less words will
be left unused/wasted. There are only 64 rules available in total, so every
one counts.
After this modification, many fields and some structs became unused or were
simplified, resulting in overall simpler implementation.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add tracepoint for adding and removing switch rules
ice: Remove unused members from switch API
ice: Optimize switch recipe creation
ice: remove unused recipe bookkeeping data
ice: Simplify bitmap setting in adding recipe
ice: Remove reading all recipes before adding a new one
ice: Remove unused struct ice_prot_lkup_ext members
====================
Link: https://patch.msgid.link/20240711181312.2019606-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-07-11 (net/intel)
This series contains updates to most Intel network drivers.
Tony removes MODULE_AUTHOR from drivers containing the entry.
Simon Horman corrects a kdoc entry for i40e.
Pawel adds implementation for devlink param "local_forwarding" on ice.
Michal removes unneeded call, and code, for eswitch rebuild for ice.
Sasha removed a no longer used field from igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Remove the internal 'eee_advert' field
ice: remove eswitch rebuild
ice: Add support for devlink local_forwarding param
i40e: correct i40e_addr_to_hkey() name in kdoc
net: intel: Remove MODULE_AUTHORs
====================
Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
idpf: XDP chapter I: convert Rx to libeth
Alexander Lobakin says:
XDP for idpf is currently 5 chapters:
* convert Rx to libeth (this);
* convert Tx and stats to libeth;
* generic XDP and XSk code changes, libeth_xdp;
* actual XDP for idpf via libeth_xdp;
* XSk for idpf (^).
Part I does the following:
* splits &idpf_queue into 4 (RQ, SQ, FQ, CQ) and puts them on a diet;
* ensures optimal cacheline placement, strictly asserts CL sizes;
* moves currently unused/dead singleq mode out of line;
* reuses libeth's Rx ptype definitions and helpers;
* uses libeth's Rx buffer management for both header and payload;
* eliminates memcpy()s and coherent DMA uses on hotpath, uses
napi_build_skb() instead of in-place short skb allocation.
Most idpf patches, except for the queue split, removes more lines
than adds.
Expect far better memory utilization and +5-8% on Rx depending on
the case (+17% on skb XDP_DROP :>).
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: use libeth Rx buffer management for payload buffer
idpf: convert header split mode to libeth + napi_build_skb()
libeth: support different types of buffers for Rx
idpf: remove legacy Page Pool Ethtool stats
idpf: reuse libeth's definitions of parsed ptype structures
idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ
idpf: merge singleq and splitq &net_device_ops
idpf: strictly assert cachelines of queue and queue vector structures
idpf: avoid bloating &idpf_q_vector with big %NR_CPUS
idpf: split &idpf_queue into 4 strictly-typed queue structures
idpf: stop using macros for accessing queue descriptors
libeth: add cacheline / struct layout assertion helpers
page_pool: use __cacheline_group_{begin, end}_aligned()
cache: add __cacheline_group_{begin, end}_aligned() (+ couple more)
====================
Link: https://patch.msgid.link/20240710203031.188081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the kernel's 'ethtool_keee' structure is in use, the internal
'eee_advert' field becomes pointless and can be removed.
This patch comes to clean up this redundant code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since the port representors are added one by one there is no need to do
eswitch rebuild. Each port representor is detached and attached in VF
reset path.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct name of i40e_addr_to_hkey() in it's kdoc.
kernel-doc -none reports:
drivers/net/ethernet/intel/i40e/i40e.h:739: warning: expecting prototype for i40e_mac_to_hkey(). Prototype was for i40e_addr_to_hkey() instead
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We are moving away from the Sourceforge email address. Rather than
removing or updating the email for the affected entries, remove the
MODULE_AUTHOR altogether as its usage is incorrect [1].
Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Track the number of rules and recipes added to switch. Add a tracepoint to
ice_aq_sw_rules(), which shows both rule and recipe count. This information
can be helpful when designing a set of rules to program to the hardware, as
it shows where the practical limit is. Actual limits are known (64 recipes,
32k rules), but it's hard to translate these values to how many rules the
*user* can actually create, because of extra metadata being implicitly
added, and recipe/rule chaining. Chaining combines several recipes/rules to
create a larger recipe/rule, so one large rule added by the user might
actually consume multiple rules from hardware perspective.
Rule counter is simply incremented/decremented in ice_aq_sw_rules(), since
all rules are added or removed via it.
Counting recipes is harder, as recipes can't be removed (only overwritten).
Recipes added via ice_aq_add_recipe() could end up being unused, when
there is an error in later stages of rule creation. Instead, track the
allocation and freeing of recipes, which should reflect the actual usage of
recipes (if something fails after recipe(s) were created, caller should
free them). Also, a number of recipes are loaded from NVM by default -
initialize the recipe counter with the number of these recipes on switch
initialization.
Example configuration:
cd /sys/kernel/tracing
echo function > current_tracer
echo ice_aq_sw_rules > set_ftrace_filter
echo ice_aq_sw_rules > set_event
echo 1 > tracing_on
cat trace
Example output:
tc-4097 [069] ...1. 787.595536: ice_aq_sw_rules <-ice_rem_adv_rule
tc-4097 [069] ..... 787.595705: ice_aq_sw_rules: rules=9 recipes=15
tc-4098 [057] ...1. 787.652033: ice_aq_sw_rules <-ice_add_adv_rule
tc-4098 [057] ..... 787.652201: ice_aq_sw_rules: rules=10 recipes=16
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove several members of struct ice_sw_recipe and struct
ice_prot_lkup_ext. Remove struct ice_recp_grp_entry and struct
ice_pref_recipe_group, since they are now unused as well.
All of the deleted members were only written to and never read, so it's
pointless to keep them.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently when creating switch recipes, switch ID is always added as the
first word in every recipe. There are only 5 words in a recipe, so one
word is always wasted. This is also true for the last recipe, which stores
result indexes (in case of chain recipes). Therefore the maximum usable
length of a chain recipe is 4 * 4 = 16 words. 4 words in a recipe, 4
recipes that can be chained (using a 5th one for result indexes).
Current max size chained recipe:
0: smmmm
1: smmmm
2: smmmm
3: smmmm
4: srrrr
Where:
s - switch ID
m - regular match (e.g. ipv4 src addr, udp dst port, etc.)
r - result index
Switch ID does not actually need to be present in every recipe, only in one
of them (in case of chained recipe). This frees up to 8 extra words:
3 from recipes in the middle (because first recipe still needs to have
switch ID), and 5 from one extra recipe (because now the last recipe also
does not have switch ID, so it can chain 1 more recipe).
Max size chained recipe after changes:
0: smmmm
1: Mmmmm
2: Mmmmm
3: Mmmmm
4: MMMMM
5: Rrrrr
Extra usable words available after this change are highlighted with capital
letters.
Changing how switch ID is added is not straightforward, because it's not a
regular lookup. Its FV index and mask can't be determined based on protocol
+ offset pair read from package and instead need to be added manually.
Additionally, change how result indexes are added. Currently they are
always inserted in a new recipe at the end. Example for 13 words, (with
above optimization, switch ID being one of the words):
0: smmmm
1: mmmmm
2: mmmxx
3: rrrxx
Where:
x - unused word
In this and some other cases, the result indexes can be moved just after
last matches because there are unused words, saving one recipe. Example
for 13 words after both optimizations:
0: smmmm
1: mmmmm
2: mmmrr
Note how one less result index is needed in this case, because the last
recipe does not need to "link" to itself.
There are cases when adding an additional recipe for result indexes cannot
be avoided. In that cases result indexes are all put in the last recipe.
Example for 14 words after both optimizations:
0: smmmm
1: mmmmm
2: mmmmx
3: rrrxx
With these two changes, recipes/rules are more space efficient, allowing
more to be created in total.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove root_buf from recipe struct. Its only usage was in ice_find_recp(),
where if recipe had an inverse action, it was skipped, but actually the
driver never adds inverse actions, so effectively it was pointless.
Without root_buf, the recipe data element in ice_add_sw_recipe() does
not need to be persistent and can also be automatically deallocated with
__free, which nicely simplifies unroll.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove unnecessary size checks when copying bitmaps in ice_add_sw_recipe()
and replace them with compile time assert. Check if the bitmaps are equal
size, as they are copied both ways.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The content of the first read recipe is used as a template when adding a
recipe. It isn't needed - only prune index is directly set from there. Set
it in the code instead. Also, now there's no need to set rid and lookup
indexes to 0, as the whole recipe buffer is initialized to 0.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove field_off as it's never used.
Remove done bitmap, as its value is only checked and never assigned.
Reusing sub-recipes while creating new root recipes is currently not
supported in the driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To debug link issues in the field, serdes Tx/Rx equalizer values
help to determine the health of serdes lane.
Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer.
The following list of equalizer param is supported
a. rx_equalization_pre2
b. rx_equalization_pre1
c. rx_equalization_post1
d. rx_equalization_bflf
e. rx_equalization_bfhf
f. rx_equalization_drate
g. tx_equalization_pre1
h. tx_equalization_pre3
i. tx_equalization_atten
j. tx_equalization_post1
k. tx_equalization_pre2
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To debug link issues in the field, it is paramount to
dump fec corrected/uncorrected block counts from firmware.
Firmware requires PCS quad number and PCS port number to
read FEC statistics. Current driver implementation does
not maintain above physical properties of a port.
Add new driver API to derive physical properties of an input
port.These properties include PCS quad number, PCS port number,
serdes lane count, primary serdes lane number.
Extend ethtool option '--show-fec' to support fec statistics.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
Standard defines above statistics per lane but current
implementation supports total FEC statistics per port
i.e. sum of all lane per port. Find sample output below
FEC parameters for ens21f0np0:
Supported/Configured FEC encodings: Auto RS BaseR
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current driver implementation for Sideband Queue supports a
fixed flag (ICE_AQ_FLAG_RD). To retrieve FEC statistics from
firmware, Sideband Queue command is used with a different flag.
Extend API for Sideband Queue command to use 'flags' as input
argument.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf uses Page Pool for data buffers with hardcoded buffer lengths of
4k for "classic" buffers and 2k for "short" ones. This is not flexible
and does not ensure optimal memory usage. Why would you need 4k buffers
when the MTU is 1500?
Use libeth for the data buffers and don't hardcode any buffer sizes. Let
them be calculated from the MTU for "classics" and then divide the
truesize by 2 for "short" ones. The memory usage is now greatly reduced
and 2 buffer queues starts make sense: on frames <= 1024, you'll recycle
(and resync) a page only after 4 HW writes rather than two.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, idpf uses the following model for the header buffers:
* buffers are allocated via dma_alloc_coherent();
* when receiving, napi_alloc_skb() is called and then the header is
copied to the newly allocated linear part.
This is far from optimal as DMA coherent zone is slow on many systems
and memcpy() neutralizes the idea and benefits of the header split. Not
speaking of that XDP can't be run on DMA coherent buffers, but at the
same time the idea of allocating an skb to run XDP program is ill.
Instead, use libeth to create page_pools for the header buffers, allocate
them dynamically and then build an skb via napi_build_skb() around them
with no memory copy. With one exception...
When you enable header split, you expect you'll always have a separate
header buffer, so that you could reserve headroom and tailroom only
there and then use full buffers for the data. For example, this is how
TCP zerocopy works -- you have to have the payload aligned to PAGE_SIZE.
The current hardware running idpf does *not* guarantee that you'll
always have headers placed separately. For example, on my setup, even
ICMP packets are written as one piece to the data buffers. You can't
build a valid skb around a data buffer in this case.
To not complicate things and not lose TCP zerocopy etc., when such thing
happens, use the empty header buffer and pull either full frame (if it's
short) or the Ethernet header there and build an skb around it. GRO
layer will pull more from the data buffer later. This W/A will hopefully
be removed one day.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Page Pool Ethtool stats are deprecated since the Netlink Page Pool
interface introduction.
idpf receives big changes in Rx buffer management, including &page_pool
layout, so keeping these deprecated stats does only harm, not speaking
of that CONFIG_IDPF selects CONFIG_PAGE_POOL_STATS unconditionally,
while the latter is often turned off for better performance.
Remove all the references to PP stats from the Ethtool code. The stats
are still available in their full via the generic Netlink interface.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf's in-kernel parsed ptype structure is almost identical to the one
used in the previous Intel drivers, which means it can be converted to
use libeth's definitions and even helpers. The only difference is that
it doesn't use a constant table (libie), rather than one obtained from
the device.
Remove the driver counterpart and use libeth's helpers for hashes and
checksums. This slightly optimizes skb fields processing due to faster
checks. Also don't define big static array of ptypes in &idpf_vport --
allocate them dynamically. The pointer to it is anyway cached in
&idpf_rx_queue.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, all HW supporting idpf supports the singleq model, but none
of it advertises it by default, as splitq is supported and preferred
for multiple reasons. Still, this almost dead code often times adds
hotpath branches and redundant cacheline accesses.
While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
the singleq code only when it's enabled manually. This corresponds to
-10 Kb of object code size and a good bunch of hotpath checks.
idpf_is_queue_model_split() works as a gate and compiles out to `true`
when the config option is disabled.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now that the queue and queue vector structures are separated and laid
out optimally, group the fields as read-mostly, read-write, and cold
cachelines and add size assertions to make sure new features won't push
something out of its place and provoke perf regression.
Despite looking innocent, this gives up to 2% of perf bump on Rx.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
