summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2023-12-05ice: Rename E822 to E82XKarol Kolacinski
When code is applicable for both E822 and E823 devices, rename it from E822 to E82X. ICE_PHY_PER_NAC_E822 was unused, so just remove it. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: periodically kick Tx timestamp interruptJacob Keller
The E822 hardware for Tx timestamping keeps track of how many outstanding timestamps are still in the PHY memory block. It will not generate a new interrupt to the MAC until all of the timestamps in the region have been read. If somehow all the available data is not read, but the driver has exited its interrupt routine already, the PHY will not generate a new interrupt even if new timestamp data is captured. Because no interrupt is generated, the driver never processes the timestamp data. This state results in a permanent failure for all future Tx timestamps. It is not clear how the driver and hardware could enter this state. However, if it does, there is currently no recovery mechanism. Add a recovery mechanism via the periodic PTP work thread which invokes ice_ptp_periodic_work(). Introduce a new check, ice_ptp_maybe_trigger_tx_interrupt() which checks the PHY timestamp ready bitmask. If any bits are set, trigger a software interrupt by writing to PFINT_OICR. Once triggered, the main timestamp processing thread will read through the PHY data and clear the outstanding timestamp data. Once cleared, new data should trigger interrupts as expected. This should allow recovery from such a state rather than leaving the device in a state where we cannot process Tx timestamps. It is possible that this function checks for timestamp data simultaneously with the interrupt, and it might trigger additional unnecessary interrupts. This will cause a small amount of additional processing. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: Re-enable timestamping correctly after resetKarol Kolacinski
During reset, TX_TSYN interrupt should be processed as it may process timestamps in brief moments before and after reset. Timestamping should be enabled on VSIs at the end of reset procedure. On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed because error only happens on resets. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: Improve logs for max ntuple errorsPawel Kaminski
Supported number of ntuple filters affect also maximum location value that can be provided to ethtool command. Update error message to provide info about max supported value. Fix double spaces in the error messages. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: add CGU info to devlink info callbackArkadiusz Kubalewski
If Clock Generation Unit is present on NIC board user shall know its details. Provide the devlink info callback with a new: - fixed type object (cgu.id) indicating hardware variant of onboard CGU, - running type object (fw.cgu) consisting of CGU id, config and firmware versions. These information shall be known for debugging purposes. Test (on NIC board with CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu cgu.id 36 fw.cgu 8032.16973825.6021 Test (on NIC board without CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu -c 0 Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: read internal temperature sensorKonrad Knitter
Since 4.30 firmware exposes internal thermal sensor reading via admin queue commands. Expose those readouts via hwmon API when supported. Datasheet: Get Sensor Reading Command (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer. | | Return value | 6-7 | | Return value. | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor | 16 | | 0x00: Internal temp | | | | | 0x01-0xFF: Reserved. | | Format | 17 | Requested response | Only 0x00 is supported. | | | | format | 0x01-0xFF: Reserved. | | Reserved | 18-23 | | | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Get Sensor Reading Response (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer | | Return value | 6-7 | | Return value. | | | | | EINVAL: Invalid | | | | | parameters | | | | | ENOENT: Unsupported | | | | | sensor | | | | | EIO: Sensor access | | | | | error | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor Reading | 16-23 | | Format of the reading | | | | | is dependent on request | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Sensor Reading for Sensor 0x00 (Internal Chip Temperature): +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Thermal Sensor | 0 | | Reading in degrees | | reading | | | Celsius. Signed int8 | | Warning High | 1 | | Warning High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Critical High | 2 | | Critical High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Fatal High | 3 | | Fatal High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Reserved | 4-7 | | | +--------------------+--------+--------------------+-------------------------+ Driver provides current reading from HW as well as device specific thresholds for thermal alarm (Warning, Critical, Fatal) events. $ sensors Output ========================================================= ice-pci-b100 Adapter: PCI adapter temp1: +62.0°C (high = +95.0°C, crit = +105.0°C) (emerg = +115.0°C) Tested on Intel Corporation Ethernet Controller E810-C for SFP Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com> Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com> Co-developed-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-04net: Add NAPI IRQ supportAmritha Nambiar
Add support to associate the interrupt vector number for a NAPI instance. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147334728.5260.13221803396905901904.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04ice: Add support in the driver for associating queue with napiAmritha Nambiar
After the napi context is initialized, map the napi instance with the queue/queue-set on the corresponding irq line. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147332060.5260.13310934657151560599.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29ice: Fix VF Reset paths when interface in a failed over aggregateDave Ertman
There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-27 (i40e, iavf) This series contains updates to i40e and iavf drivers. Ivan Vecera performs more cleanups on i40e and iavf drivers; removing unused fields, defines, and unneeded fields. Petr Oros utilizes iavf_schedule_aq_request() helper to replace open coded equivalents. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: iavf: use iavf_schedule_aq_request() helper iavf: Remove queue tracking fields from iavf_adminq_ring i40e: Remove queue tracking fields from i40e_adminq_ring i40e: Remove AQ register definitions for VF types i40e: Delete unused and useless i40e_pf fields ==================== Link: https://lore.kernel.org/r/20231127211037.1135403-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28ice: fix error code in ice_eswitch_attach()Dan Carpenter
Set the "err" variable on this error path. Fixes: fff292b47ac1 ("ice: add VF representors one by one") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/e0349ee5-76e6-4ff4-812f-4aa0d3f76ae7@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-27iavf: use iavf_schedule_aq_request() helperPetr Oros
Use the iavf_schedule_aq_request() helper when we need to schedule a watchdog task immediately. No functional change. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27iavf: Remove queue tracking fields from iavf_adminq_ringIvan Vecera
Fields 'head', 'tail', 'len', 'bah' and 'bal' in iavf_adminq_ring are used to store register offsets. These offsets are initialized and remains constant so there is no need to store them in the iavf_adminq_ring structure. Remove these fields from iavf_adminq_ring and use register offset constants instead. Remove iavf_adminq_init_regs() that originally stores these constants into these fields. Finally improve iavf_check_asq_alive() that assumes that non-zero value of hw->aq.asq.len indicates fully initialized AdminQ send queue. Replace it by check for non-zero value of field hw->aq.asq.count that is non-zero when the sending queue is initialized and is zeroed during shutdown of the queue. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Remove queue tracking fields from i40e_adminq_ringIvan Vecera
Fields 'head', 'tail', 'len', 'bah' and 'bal' in i40e_adminq_ring are used to store register offsets. These offsets are initialized and remains constant so there is no need to store them in the i40e_adminq_ring structure. Remove these fields from i40e_adminq_ring and use register offset constants instead. Remove i40e_adminq_init_regs() that originally stores these constants into these fields. Finally improve i40e_check_asq_alive() that assumes that non-zero value of hw->aq.asq.len indicates fully initialized AdminQ send queue. Replace it by check for non-zero value of field hw->aq.asq.count that is non-zero when the sending queue is initialized and is zeroed during shutdown of the queue. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Remove AQ register definitions for VF typesIvan Vecera
The i40e driver does not handle its VF device types so there is no need to keep AdminQ register definitions for such device types. Remove them. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Delete unused and useless i40e_pf fieldsIvan Vecera
Removed fields: .fc_autoneg_status Since commit c56999f94876 ("i40e/i40evf: Add set_fc and init of FC settings") write-only and otherwise unused .eeprom_version Write-only and otherwise unused .atr_sample_rate Has only one possible value (I40E_DEFAULT_ATR_SAMPLE_RATE). Remove it and replace its occurrences by I40E_DEFAULT_ATR_SAMPLE_RATE .adminq_work_limit Has only one possible value (I40E_AQ_WORK_LIMIT). Remove it and replace its occurrences by I40E_AQ_WORK_LIMIT .tx_sluggish_count Unused, never written .pf_seid Used to store VSI downlink seid and it is referenced only once in the same codepath. There is no need to save it into i40e_pf. Remove it and use downlink_seid directly in the mentioned log message. .instance Write only. Remove it as well as ugly static local variable 'pfs_found' in i40e_probe. .int_policy .switch_kobj .ptp_pps_work .ptp_extts1_work .ptp_pps_start .pps_delay .ptp_pin .override_q_count All these unused at all Prior the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 5368, cachelines: 84, members: 127 */ /* sum members: 5297, holes: 20, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 56 bytes */ }; After the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 4976, cachelines: 78, members: 112 */ /* sum members: 4905, holes: 17, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 48 bytes */ }; Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-18Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: one by one port representors creation Michal Swiatkowski says: Currently ice supports creating port representors only for VFs. For that use case they can be created and removed in one step. This patchset is refactoring current flow to support port representor creation also for subfunctions and SIOV. In this case port representors need to be created and removed one by one. Also, they can be added and removed while other port representors are running. To achieve that we need to change the switchdev configuration flow. Three first patches are only cosmetic (renaming, removing not used code). Next few ones are preparation for new flow. The most important one is "add VF representor one by one". It fully implements new flow. New type of port representor (for subfunction) will be introduced in follow up patchset. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: reserve number of CP queues ice: adjust switchdev rebuild path ice: add VF representors one by one ice: realloc VSI stats arrays ice: set Tx topology every time new repr is added ice: allow changing SWITCHDEV_CTRL VSI queues ice: return pointer to representor ice: make representor code generic ice: remove VF pointer reference in eswitch code ice: track port representors in xarray ice: use repr instead of vf->repr ice: track q_id in representor ice: remove unused control VSI parameter ice: remove redundant max_vsi_num variable ice: rename switchdev to eswitch ==================== Link: https://lore.kernel.org/r/20231114181449.1290117-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-18Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== igc: Add support for physical + free-running timers Vinicius Costa Gomes says: The objective is to allow having functionality that depends on the physical timer (taprio and ETF offloads, for example) and vclocks operating together. The "big" missing piece is the implementation of the .getcyclesx64() function in igc, as i225/i226 have multiple timers, we use one of those timers (timer 1) as a free-running (non adjustable) timer. The complication is that only implementing .getcyclesx64() and nothing else will break synchronization when using vclocks, as reading the clock will retrieve the free-running value but timnestamps will come from the adjustable timer. The solution is to modify "in one go" the timestamping code to be able to retrieve the timestamp from the correct timer (if a socket is "phc_bound" to a vclock the timestamp will come from the free-running timer). I was debating whether or not to do the adjustments for the internal latencies for the free-running timestamps, decided to do the adjustments so the path delay when using vclocks is similar to the one when using the physical clock. One future improvement is to implement the .getcrosscycles() function. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Add support for PTP .getcyclesx64() igc: Simplify setting flags in the TX data descriptor ==================== Link: https://lore.kernel.org/r/20231114183640.1303163-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-14i40e: Delete unused i40e_mac_info fieldsIvan Vecera
From commit 9eed69a9147c ("i40e: Drop FCoE code from core driver files") the field i40e_mac_info.san_addr is unused (never filled). The field i40e_mac_info.max_fcoeq is unused from the beginning. Remove both. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Co-developed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-16-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Move inline helpers to i40e_prototype.hIvan Vecera
Move version check helper functions from i40e_type.h to i40e_prototype.h as per discussion [1]. [1] https://lore.kernel.org/all/cdcd6b97-1138-4cd7-854f-b3faa1f475f8@intel.com/#t Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-15-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Remove VF MAC typesIvan Vecera
The i40e_hw.mac.type cannot to be equal to I40E_MAC_VF or I40E_MAC_X722_VF so remove helper i40e_is_vf(), simplify i40e_adminq_init_regs() and remove enums for these VF MAC types. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-14-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Use helpers to check running FW and AQ API versionsIvan Vecera
Use new helpers to check versions of running FW and provided AQ API to make the code more readable. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-13-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Add other helpers to check version of running firmware and AQ APIIvan Vecera
Add another helper functions that will be used by subsequent patch to refactor existing open-coded checks whether the version of running firmware and AdminQ API is recent enough to provide certain capabilities. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-12-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Move i40e_is_aq_api_ver_ge helperIvan Vecera
Move i40e_is_aq_api_ver_ge helper function (used to check if AdminQ API version is recent enough) to header so it can be used from other .c files. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-11-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Initialize hardware capabilities at single placeIvan Vecera
Some i40e_hw.caps bits are set in i40e_set_hw_caps(), some of them in i40e_init_adminq() and the rest of them in i40e_sw_init(). Consolidate the initialization to single proper place i40e_set_hw_caps(). Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-10-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Consolidate hardware capabilitiesIvan Vecera
Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate capabilities provided by hardware. Move and merge i40e_pf.hw_features into i40e_hw.caps as this is more appropriate place for them and adjust their names to I40E_HW_CAP_... convention. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Use DECLARE_BITMAP for flags field in i40e_hwIvan Vecera
Convert flags field in i40e_hw from u64 to bitmap and its usage to use bit access functions and rename the field to 'caps' as this field describes capabilities that are set once on init and read many times later. Changes: - Convert "hw_ptr->flags & FLAG" to "test_bit(FLAG, ...)" - Convert "hw_ptr->flags |= FLAG" to "set_bit(FLAG, ...)" - Convert "hw_ptr->flags &= ~FLAG" to "clear_bit(FLAG, ...)" - Rename i40e_hw.flags to i40e_hw.caps - Rename i40e_set_hw_flags() to i40e_set_hw_caps() - Adjust caps names so they are prefixed by I40E_HW_CAP_ and existing _CAPABLE suffixes are stripped Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Use DECLARE_BITMAP for flags and hw_features fields in i40e_pfIvan Vecera
Convert flags and hw_features fields from i40e_pf from u32 to bitmaps and their usage to use bit access functions. Changes: - Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)" - Rename flag field to bitno in i40e_priv_flags and adjust ethtool callbacks to work with flags bitmap - Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS' like in ice driver Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Remove _t suffix from enum type namesIvan Vecera
Enum type names should not be suffixed by '_t'. Either to use 'typedef enum name name_t' to so plain 'name_t var' instead of 'enum name_t var'. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Remove unused flagsIvan Vecera
The flag I40E_FLAG_RX_CSUM_ENABLED and I40E_HW_FLAG_DROP_MODE are set and never read. Remove them. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: Change user notification of non-SFP module in i40e_get_module_info()Andrii Staikov
Make the driver not produce an error message on "ethtool -m ethX" command when a non-SFP module is encountered hence there is no possibility to read the EEPROM. Make the message to appear in the debug log rather than as an error string. Change the return code to -EOPNOTSUPP and the string to make it more verbose. Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> CC: Stefan Assmann <sassmann@redhat.com> CC: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: add an error code check in i40e_vsi_setupSu Hui
check the value of 'ret' after calling 'i40e_vsi_config_rss'. Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14i40e: increase max descriptors for XL710Justin Bronder
In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN description states that the maximum size of the descriptor queue is 8k minus 32, or 8160. Signed-off-by: Justin Bronder <jsbronder@cold-front.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13igc: Add support for PTP .getcyclesx64()Vinicius Costa Gomes
Add support for using Timer 1 (i225/i226 have 4 timer registers) as a free-running clock (the "cycles" clock) in addition to Timer 0 (the default, "adjustable clock"). The objective is to allow taprio/etf offloading to coexist with PTP vclocks. Besides the implementation of .getcyclesx64() for i225/i226, to keep timestamping working when vclocks are in use, we also need to add support for TX and RX timestamping using the free running timer, when the requesting socket is bound to a vclock. On the RX side, i225/i226 can be configured to store the values of two timers in the received packet metadata area, so it's a matter of configuring the right registers and retrieving the right timestamp. The TX is a bit more involved because the hardware stores a single timestamp (with the selected timer in the TX descriptor) into one of the timestamp registers. Note some changes at how the timestamps are done for RX, the conversion and adjustment of timestamps are now done closer to the consumption of the timestamp instead of near the reception. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13igc: Simplify setting flags in the TX data descriptorVinicius Costa Gomes
We can re-use the IGC_SET_FLAG() macro to simplify setting some values in the TX data descriptor. With the macro it's easier to get the meaning of the operations. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: reserve number of CP queuesMichal Swiatkowski
Rebuilding CP VSI each time the PR is created drastically increase the time of maximum VFs creation. Add function to reserve number of CP queues to deal with this problem. Use the same function to decrease number of queues in case of removing VFs. Assume that caller of ice_eswitch_reserve_cp_queues() will also call ice_eswitch_attach/detach() correct number of times. Still one by one PR adding is handy for VF resetting routine. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: adjust switchdev rebuild pathMichal Swiatkowski
There is no need to use specific functions for rebuilding path. Let's use current implementation by removing all representors and as the result remove switchdev environment. It will be added in devices rebuild path. For example during adding VFs, port representors for them also will be created. Rebuild control plane VSI before removing representors with INIT_VSI flag set to reinit VSI in hardware after reset. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: add VF representors one by oneMichal Swiatkowski
Implement adding representors one by one. Always set switchdev environment when first representor is being added and clear environment when last one is being removed. Basic switchdev configuration remains the same. Code related to creating and configuring representor was changed. Instead of setting whole representors in one function handle only one representor in setup function. The same with removing representors. Stop representors when new one is being added or removed. Stop means, disabling napi, stopping traffic and removing slow path rule. It is needed because ::q_id will change after remapping, so each representor will need new rule. When representor are stopped rebuild control plane VSI with one more or one less queue. One more if new representor is being added, one less if representor is being removed. Bridge port is removed during unregister_netdev() call on PR, so there is no need to call it from driver side. After that do remap new queues to correct vector. At the end start all representors (napi enable, start queues, add slow path rule). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: realloc VSI stats arraysMichal Swiatkowski
Previously only case when queues amount is lower was covered. Implement realloc for case when queues amount is higher than previous one. Use krealloc() function and zero new allocated elements. It has to be done before ice_vsi_def_cfg(), because stats element for ring is set there. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: set Tx topology every time new repr is addedMichal Swiatkowski
It is needed to track correct Tx topology. Update it every time new representor is created or remove node in case of removing corresponding representor. Still clear all node when removing switchdev mode as part of Tx topology isn't related only to representors. Also clear ::rate_note value to prevent skipping this node next time Tx topology is created. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: allow changing SWITCHDEV_CTRL VSI queuesMichal Swiatkowski
Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI type. Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after calling ice_vsi_rebuild(). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: return pointer to representorMichal Swiatkowski
In follow up patches it will be easier to obtain created port representor pointer instead of the id. Without it the pattern from eswitch side will look like: - create PR - get PR based on the id Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: make representor code genericMichal Swiatkowski
Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-07-18 20:02:30 +0000