summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/renesas
AgeCommit message (Collapse)Author
2015-01-27sh_eth: Ensure DMA engines are stopped before freeing buffersBen Hutchings
Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27sh_eth: Remove RX overflow log messagesBen Hutchings
If RX traffic is overflowing the FIFO or DMA ring, logging every time this happens just makes things worse. These errors are visible in the statistics anyway. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlersBen Hutchings
In order to stop the RX path accessing the RX ring while it's being stopped or resized, we clear the interrupt mask (EESIPR) and then call free_irq() or synchronise_irq(). This is insufficient because the interrupt handler or NAPI poller may set EESIPR again after we clear it. Also, in sh_eth_set_ringparam() we currently don't disable NAPI polling at all. I could easily trigger a crash by running the loop: while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. To fix this: - Add a software flag (irq_enabled) to signal whether interrupts should be enabled - In the interrupt handler, if the flag is clear then clear EESIPR and return - In the NAPI poller, if the flag is clear then don't set EESIPR - Set the flag before enabling interrupts in sh_eth_dev_init() and sh_eth_set_ringparam() - Clear the flag and serialise with the interrupt and NAPI handlers before clearing EESIPR in sh_eth_close() and sh_eth_set_ringparam() After this, I could run the loop for 100,000 iterations successfully. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: Fix crash or memory leak when resizing rings on device that is downBen Hutchings
If the device is down then no packet buffers should be allocated. We also must not touch its registers as it may be powered off. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: Detach net device when stopping queue to resize DMA ringsBen Hutchings
We must only ever stop TX queues when they are full or the net device is not 'ready' so far as the net core, and specifically the watchdog, is concerned. Otherwise, the watchdog may fire *immediately* if no packets have been added to the queue in the last 5 seconds. What's more, sh_eth_tx_timeout() will likely crash if called while we're resizing the TX ring. I could easily trigger this by running the loop: while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: Fix padding of short frames on TXBen Hutchings
If an skb to be transmitted is shorter than the minimum Ethernet frame length, we currently set the DMA descriptor length to the minimum but do not add zero-padding. This could result in leaking sensitive data. We also pass different lengths to dma_map_single() and dma_unmap_single(). Use skb_padto() to pad properly, before calling dma_map_single(). Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: add more PM methodsMikhail Ulyanov
Add sh_eth_{suspend|resume}() implementing {suspend|resume|freeze|thaw|poweroff| restore}() PM methods to make it possible to restore from hibernation not only in Linux but also in e.g. U-Boot and to have more determined state on resume/ restore. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> [Sergei: moved sh_eth_{suspend|resume}() before sh_eth_runtime_nop(), enclosed them with #ifdef CONFIG_PM_SLEEP, reordered the local variables, got rid of *goto* and label, reordered macro invocations, renamed, modified the changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26sh_eth: use SET_RUNTIME_PM_OPS()Mikhail Ulyanov
Use SET_RUNTIME_PM_OPS() macro to initialize the runtime PM method pointers in the 'struct dev_pm_ops'. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> [Sergei: renamed, added the changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19sh_eth: Fix ethtool operation crash when net device is downBen Hutchings
The driver connects and disconnects the PHY device whenever the net device is brought up and down. The ethtool get_settings, set_settings and nway_reset operations will dereference a null or dangling pointer if called while it is down. I think it would be preferable to keep the PHY connected, but there may be good reasons not to. As an immediate fix for this bug: - Set the phydev pointer to NULL after disconnecting the PHY - Change those three operations to return -ENODEV while the PHY is not connected Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19sh_eth: Fix promiscuous mode on chips without TSUBen Hutchings
Currently net_device_ops::set_rx_mode is only implemented for chips with a TSU (multiple address table). However we do need to turn the PRM (promiscuous) flag on and off for other chips. - Remove the unlikely() from the TSU functions that we may safely call for chips without a TSU - Make setting of the MCT flag conditional on the tsu capability flag - Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb it into both net_device_ops structures - Remove the previously-unreachable branch in sh_eth_rx_mode() that would otherwise reset the flags to defaults for non-TSU chips Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15net: sh_eth: Use u32 for 32-bit register dataGeert Uytterhoeven
Replace "unsigned long" by "u32" when handling 32-bit register data. A.o., this saves 11 * 36 bytes in the static sh_eth_cpu_data structures when compiling for 64-bit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15sh_eth: Fix addition of .trscer_err_mask to wrong SoC dataGeert Uytterhoeven
commit b284fbe3b3ef9cf8 ("sh_eth: Fix access to TRSCER register") wanted to add a .trscer_err_mask value to the R-Car Gen2 family-specific data structure (r8a779x_data), but it was accidentally added to the SH7724-specific data structure (sh7724_data). Presumably this happened due to a patch conflict with commit d407bc0203539031 ("sh-eth: Set fdr_value of R-Car SoCs"), which added another field at the same position. Move the field setting to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: b284fbe3b3ef9cf8 ("sh_eth: Fix access to TRSCER register") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-08sh_eth: Fix access to TRSCER registerNobuhiro Iwamatsu
TRSCER register is configured differently by SoCs. TRSCER of R-Car Gen2 is RINT8 bit only valid, other bits are reserved bits. This removes access to TRSCER register reserve bit by adding variable trscer_err_mask to sh_eth_cpu_data structure, set the register information to each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-08sh-eth: Set fdr_value of R-Car SoCsNobuhiro Iwamatsu
FDR register of R-Car set in fdr_value can have the original settings. This sets the value that is suitable for each SoCs to fdr_value of R8A777x and R8A779x. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09sh_eth: Remove redundant alignment adjustmentMitsuhiro Kimura
PTR_ALIGN macro after skb_reserve is redundant, because skb_reserve function adjusts the alignment of skb->data. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09sh_eth: Optimization for RX excess judgementMitsuhiro Kimura
Both of 'boguscnt' and 'quota' have nearly meaning as the condition of the reception loop. In order to cut down redundant processing, this patch changes excess judgement. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29sh_eth: Fix sleeping function called from invalid contextMitsuhiro Kimura
This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29sh_eth: Fix skb alloc size and alignment adjust rule.Mitsuhiro Kimura
In the current driver, allocation size of skb does not care the alignment adjust after allocation. And also, in the current implementation, buffer alignment method by sh_eth_set_receive_align function has a bug that this function displace buffer start address forcedly when the alignment is corrected. In the result, tail of the skb will exceed allocated area and kernel panic will be occurred. This patch fix this issue. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net: sh_eth: Add r8a7793 supportHisashi Nakamura
The device tree probing for R-Car M2N (r8a7793) is added. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net: sh_eth: Add RMII mode setting in probeHisashi Nakamura
When using RMMI mode, it is necessary to change in probe. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27ethernet: renesas: remove unnecessary checkVarka Bhadram
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02net: sh_eth: fix driver dependenciesBartlomiej Zolnierkiewicz
Renesas SuperH Ethernet support should be available only on Renesas ARM SoCs and SuperH architecture. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: sh_eth: Add r8a7794 supportHisashi Nakamura
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: added bindings documentation] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02sh_eth: remove checks around dev_kfree_skb() callsSergei Shtylyov
Since consume_skb() (and hence dev_kfree_skb() macro) checks the passed pointer for NULL, there's no need to check for NULL before invoking dev_kfree_skb(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix timing of RACT setting in sh_eth_rx()Yoshihiro Shimoda
This patch fixes an issue that we cannot use nfs rootfs correctly on r8a7790 when the command below runs on a host PC. $ sudo ping -f -l 8 $BOARD_IP_ADDR Since the driver sets the RACT to 1 in the first while loop of sh_eth_rx(), the controller accepts a next frame into the next RX descriptor during the while loop. But, in the first while loop doesn't allocate a next skb. So, this patch removes the RACT setting in the first while loop of sh_eth_rx(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix receive packet "exceeded" condition in sh_eth_rx()Yoshihiro Shimoda
This patch fixes the packet "exceeded" condition in sh_eth_rx() when RACT in an RX descriptor is not set and the "quota" is 0. Otherwise, kernel panic happens because the "&n->poll_list" is deleted twice in sh_eth_poll() which calls napi_complete() and net_rx_action(). Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03sh_eth: fix SH7619/771x supportSergei Shtylyov
Commit 4a55530f38e4 (net: sh_eth: modify the definitions of register) managed to leave out the E-DMAC register entries in sh_eth_offset_fast_sh3_sh2[], thus totally breaking SH7619/771x support. Add the missing entries using the data from before that commit. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03sh_eth: use RNC mode for packet receptionBen Dooks
The current behaviour of the sh_eth driver is not to use the RNC bit for the receive ring. This means that every packet recieved is not only generating an IRQ but it also stops the receive ring DMA as well until the driver re-enables it after unloading the packet. This means that a number of the following errors are generated due to the receive packet FIFO overflowing due to nowhere to put packets: net eth0: Receive FIFO Overflow Since feedback from Yoshihiro Shimoda shows that every supported LSI for this driver should have the bit enabled it seems the best way is to remove the RMCR default value from the per-system data and just write it when initialising the RMCR value. This is discussed in the message (http://www.spinics.net/lists/netdev/msg284912.html). I have tested the RMCR_RNC configuration with NFS root filesystem and the driver has not failed yet. There are further test reports from Sergei Shtylov and others for both the R8A7790 and R8A7791. There is also feedback fron Cao Minh Hiep[1] which reports the same issue in (http://comments.gmane.org/gmane.linux.network/316285) showing this fixes issues with losing UDP datagrams under iperf. Tested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13sh_eth: replace devm_kzalloc() with devm_kmalloc_array()Sergei Shtylyov
When I was converting the driver to the managed device API, only devm_kzalloc() was available for memory allocation, so I had to use it, despite zeroing out the PHY IRQ array right before initializing all its entries to PHY_POLL was quite stupid. Now that devm_kmalloc_array() has become available, we can avoid the needless zeroing out... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28sh_eth: ensure pm_runtime cannot suspend the device during initBen Dooks
The pm_rumtime work queue is causing the device to be suspended during initialisation, thus the initialisation may not be able to access registers properly. As the code is called from a work queue, it is possible that this is not seen from certain configurations/builds due to the asynchronos nature of the code. Another issue has also been found where the network device registration calls back into the driver thus causing further pm_runtime calls that also caused issues with the MDIO bus code. This has now been checked and is the only place the MDIO can be called without the device open. Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the pm system does not suspend it during the probe() call and remove the now unnecessary pm_runtime_resume() call. Also add a call in the error path to call pm_runtime_disable(). This fixes the external abort that can cause /sbin/init or other such init processed to die. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Remove goto statements that jump straight to a returnLaurent Pinchart
"goto" is well accepted for error paths in the kernel but should not be used unnecessarily. Return the correct value directly instead of using a goto when possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Register MDIO bus before registering the network deviceLaurent Pinchart
Network API functions that rely on the MDIO bus can be called as soon as the driver calls register_netdev(). Register the MDIO bus before the network device to avoid race conditions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Simplify MDIO bus initialization and releaseLaurent Pinchart
The network device passed to the sh_mdio_init and sh_mdio_release functions is only used to access the sh_eth_private instance. Pass it directly to those functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Use the platform device as the MDIO bus parentLaurent Pinchart
The MDIO bus parent is set to the network device. Beside not reflecting the hardware topology, this prevents registering the MDIO bus before initializing the network device. Fix it by setting the MDIO bus parent to the platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Use the platform device for memory allocationLaurent Pinchart
Memory allocated for the MDIO bus with the devm_kzalloc() API is associated with the network device. While this will cause memory to be freed at the right time, it doesn't allow allocating memory before the network device is initialized. Replace the network device with the parent platform device for memory allocation to remove that dependency. This also improves consistency with the other devm_* calls in the driver that all use the platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: fold netif_msg_*() and netdev_*() calls into netif_*() invocationsSergei Shtylyov
Now that we call netdev_*() under netif_msg_*() checks, we can fold these into netif_*() macro invocations. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: convert dev_*() to netdev_*() callsSergei Shtylyov
Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit shorter and at the same time give more information on a device. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: convert pr_*() to netdev_*() callsSergei Shtylyov
Convert pr_*() to netdev_*() calls as the latter provide info on a device. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: exit probe with unknown register layoutSergei Shtylyov
Exit the driver's probe() method when the register layout is unknown as the driver would cause kernel oops in this case anyway. While at it, move the corresponding error message printout and convert it from pr_err() to dev_err(). Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13sh_eth: update OF PHY registerationBen Dooks
If the sh_eth device is registered using OF, then the driver should call of_mdiobus_register() to register the PHYs described in the devicetree and then use of_phy_connect() to connect the PHYs to the device. This ensures that any PHYs registered in the device tree are appropriately connected to the parent devices nodes so that the PHY drivers can access their OF properties. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18sh_eth: add device tree supportSergei Shtylyov
Add support of the device tree probing for the Renesas SH-Mobile SoCs documenting the device tree binding as necessary. This work is loosely based on the original patch by Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13sh_eth: use ETH_ZLEN instead of home-grown #defineSergei Shtylyov
The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame size for which we have a standard macro ETH_ZLEN. Use the latter instead of the home-grown one. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17sh_eth: Add support for r7s72100Simon Horman
The r7s72100 SoC includes a fast ethernet controller. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17sh_eth: Use bool as return type of sh_eth_is_gether()Simon Horman
Return a boolean from sh_eth_is_gether() and refactor it as a one-liner. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13sh_eth: fix garbled TX error messageSergei Shtylyov
sh_eth_error() in case of a TX error tries to print a message using 2 dev_err() calls with the first string not finished by '\n', so that the resulting message would inevitably come out garbled, with something like "3net eth0: " inserted in the middle. Avoid that by merging 2 calls into one. While at it, insert an empty line after the nearby declaration. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03sh_eth: coding style fixesSergei Shtylyov
Running 'scripts/checkpatch.pl' on the driver files gives numerous warnings: - block comments using empty /* line; - unneeded \ at end of lines; - message string split across lines; - use of __attribute__((aligned(n))) instead of __aligned(n) macro; - use of __attribute__((packed)) instead of __packed macro. Additionally, running 'scripts/checkpatch.pl --strict' gives more complaints: - including the paragraph about writing to FSF into the heading comment; - alignment not matching open paren; - multiple assignments on one line; - use of CamelCase names; - missing {} on one of the *if* arms where another has them; - spinlock definition without a comment. While fixing these, also do some more style cleanups: - remove useless () around expressions; - add {} around multi-line *if* operator's arm; - remove space before comma; - add spaces after /* and before */; - properly align continuation lines of broken up expressions; - realign comments to the structure fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 12:06:32 +0000