summaryrefslogtreecommitdiff
path: root/drivers/net/hyperv/netvsc.c
AgeCommit message (Collapse)Author
2017-01-24netvsc: don't pass void * to internal device_addstephen hemminger
All the caller's/callee's know that the format of the device_add parameter is a netvsc_device_info struct. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: optimize receive pathstephen hemminger
Do manual optimizations of receive path: - remove checks for impossible conditions (but keep checks for bad data from host) - pass argument down, rather than having callee recompute what is already known - remove indirection about receive buffer datalength - remove dependence on VLAN_TAG_PRESENCE - use _hot/_cold and likely/unlikely Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: group all per-channel state togetherstephen hemminger
Put all the per-channel state together in one data struct. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24netvsc: remove no longer needed receive staging buffersstephen hemminger
The ring buffer mapping now handles the wraparound case inside get_next_pkt_raw. Therefore it is not necessary to have an additional special receive staging buffer. See commit 1562edaed8c164ca5199 ("Drivers: hv: ring_buffer: count on wrap around mappings") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29hv_netvsc: remove excessive logging on MTU changeVitaly Kuznetsov
When we change MTU or the number of channels on a netvsc device we get the following logged: hv_netvsc bf5edba8...: net device safe to remove hv_netvsc: hv_netvsc channel opened successfully hv_netvsc bf5edba8...: Send section size: 6144, Section count:2560 hv_netvsc bf5edba8...: Device MAC 00:15:5d:1e:91:12 link state up This information is useful as debug at most. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21hv_netvsc: fix a race between netvsc_send() and netvsc_init_buf()Vitaly Kuznetsov
Fix in commit 880988348270 ("hv_netvsc: set nvdev link after populating chn_table") turns out to be incomplete. A crash in netvsc_get_next_send_section() is observed on mtu change when the device is under load. The race I identified is: if we get to netvsc_send() after we set net_device_ctx->nvdev link in netvsc_device_add() but before we finish netvsc_connect_vsp()->netvsc_init_buf() send_section_map is not allocated and we crash. Unfortunately we can't set net_device_ctx->nvdev link after the netvsc_init_buf() call as during the negotiation we need to receive packets and on the receive path we check for it. It would probably be possible to split nvdev into a pair of nvdev_in and nvdev_out links and check them accordingly in get_outbound_net_device()/ get_inbound_net_device() but this looks like an overkill. Check that send_section_map is allocated in netvsc_send(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: use consume_skbStephen Hemminger
Packets that are transmitted in normal path should use consume_skb instead of kfree_skb. This allows for better tracing of packet drops. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10Revert "hv_netvsc: make inline functions static"Stephen Hemminger
These functions are used by other code misc-next tree. This reverts commit 30d1de08c87ddde6f73936c3350e7e153988fe02. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make variable localStephen Hemminger
The variable m_ret is only used in one basic block. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make netvsc_destroy_buf voidStephen Hemminger
No caller checks the return value. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: refactor completion functionStephen Hemminger
Break the different cases, code is cleaner if broken up Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: init completion during allocStephen Hemminger
Move initialization to allocate where other fields are initialized. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make device_remove voidStephen Hemminger
Always returns 0 and no callers check. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: use ARRAY_SIZE() for NDIS versionsStephen Hemminger
Don't hard code size of array of NDIS versions. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make inline functions staticStephen Hemminger
Several new functions were introduced into hyperv.h but only used in one file. Move them and let compiler decide on inline. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: style cleanupsStephen Hemminger
Fix most of the complaints about the style of the code. Things like extra blank lines and return statements. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: use kcallocStephen Hemminger
Better to use kcalloc rather than kzalloc and multiply for an array. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19hv_netvsc: Implement batching of receive completionsHaiyang Zhang
The existing code uses busy retry when unable to send out receive completions due to full ring buffer. It also gives up retrying after limit is reached, and causes receive buffer slots not being recycled. This patch implements batching of receive completions. It also prevents dropping receive completions due to full ring buffer. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: don't lose VF informationVitaly Kuznetsov
struct netvsc_device is not suitable for storing VF information as this structure is being destroyed on MTU change / set channel operation (see rndis_filter_device_remove()). Move all VF related stuff to struct net_device_context which is persistent. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08hv_netvsc: Add handler for physical link speed changeHaiyang Zhang
On Hyper-V host 2016 and later, VMs gets an event message of the physical link speed when vSwitch is changed. This patch handles this message, so the updated link speed can be reported by ethtool. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08netvsc: Use the new in-place consumption APIs in the rx pathK. Y. Srinivasan
Use the new APIs for eliminating a copy on the receive path. These new APIs also help in minimizing the number of memory barriers we end up issuing (in the ringbuffer code) since we can better control when we want to expose the ring state to the host. The patch is being resent to address earlier email issues. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09netvsc: get rid of completion timeoutsVitaly Kuznetsov
I'm hitting 5 second timeout in rndis_filter_set_rss_param() while setting RSS parameters for the device. When this happens we end up returning -ETIMEDOUT from the function and rndis_filter_device_add() falls back to setting net_device->max_chn = 1; net_device->num_chn = 1; net_device->num_sc_offered = 0; but after a moment the rndis request succeeds and subchannels start to appear. netvsc_sc_open() does unconditional nvscdev->num_sc_offered-- and it becomes U32_MAX-1. Consequent rndis_filter_device_remove() will hang while waiting for all U32_MAX-1 subchannels to appear and this is not going to happen. The immediate issue could be solved by adding num_sc_offered > 0 check to netvsc_sc_open() but we're getting out of sync with the host and it's not easy to adjust things later, e.g. in this particular case we'll be creating queues without a user request for it and races are expected. Same applies to other parts of the driver which have the same completion timeout. Following the trend in drivers/hv/* code I suggest we remove all these timeouts completely. As a guest we can always trust the host we're running on and if the host screws things up there is no easy way to recover anyway. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: introduce {net, hv}_device_to_netvsc_device() helpersVitaly Kuznetsov
Make it easier to get 'struct netvsc_device' from 'struct net_device' and 'struct hv_device' by introducing inline helpers. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: set nvdev link after populating chn_tableVitaly Kuznetsov
Crash in netvsc_send() is observed when netvsc device is re-created on mtu change/set channels. The crash is caused by dereferencing of NULL channel pointer which comes from chn_table. The root cause is a mixture of two facts: - we set nvdev pointer in net_device_context in alloc_net_device() before we populate chn_table. - we populate chn_table[0] only. The issue could be papered over by checking channel != NULL in netvsc_send() but populating the whole chn_table and writing the nvdev pointer afterwards seems more appropriate. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: get rid of struct net_device pointer in struct netvsc_deviceVitaly Kuznetsov
Simplify netvsvc pointer graph by getting rid of the redundant ndev pointer. We can always get a pointer to struct net_device from somewhere else. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: untangle the pointer messVitaly Kuznetsov
We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: move start_remove flag to net_device_contextVitaly Kuznetsov
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18hv_netvsc: Implement support for VF drivers on Hyper-VKY Srinivasan
Support VF drivers on Hyper-V. On Hyper-V, each VF instance presented to the guest has an associated synthetic interface that shares the MAC address with the VF instance. Typically these are bonded together to support live migration. By default, the host delivers all the incoming packets on the synthetic interface. Once the VF is up, we need to explicitly switch the data path on the host to divert traffic onto the VF interface. Even after switching the data path, broadcast and multicast packets are always delivered on the synthetic interface and these will have to be injected back onto the VF interface (if VF is up). This patch implements the necessary support in netvsc to support Linux VF drivers. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25hv_netvsc: Fix book keeping of skb during batching processHaiyang Zhang
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14hv_netvsc: Fix race condition on Multi-Send Data fieldHaiyang Zhang
In commit 2a04ae8acb14 ("hv_netvsc: remove locking in netvsc_send()"), the locking for MSD (Multi-Send Data) field was removed. This could cause a race condition between RNDIS control messages and data packets processing, because these two types of traffic are not synchronized. This patch fixes this issue by sending control messages out directly without reading MSD field. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate status from struct hv_netvsc_packetKY Srinivasan
Eliminate status from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate xmit_more from struct hv_netvsc_packetKY Srinivasan
Eliminate xmit_more from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate is_data_pkt from struct hv_netvsc_packetKY Srinivasan
Eliminate is_data_pkt from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion_tid from struct hv_netvsc_packetKY Srinivasan
Eliminate send_completion_tid from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate page_buf from struct hv_netvsc_packetKY Srinivasan
Eliminate page_buf from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: remove locking in netvsc_send()Vitaly Kuznetsov
Packet scheduler guarantees there won't be multiple senders for the same queue and as we use q_idx for multi_send_data the spinlock is redundant. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: move subchannel existence check to netvsc_select_queue()Vitaly Kuznetsov
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion_ctx from struct hv_netvsc_packetKY Srinivasan
Eliminate send_completion_ctx from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion from struct hv_netvsc_packetKY Srinivasan
Eliminate send_completion from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminatte the data field from struct hv_netvsc_packetKY Srinivasan
Eliminatte the data field from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate rndis_msg pointer from hv_netvsc_packet structureKY Srinivasan
Eliminate rndis_msg pointer from hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate the channel field in hv_netvsc_packet structureKY Srinivasan
Eliminate the channel field in hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27hv_netvsc: Add structs and handlers for VF messagesHaiyang Zhang
This patch adds data structures and handlers for messages related to SRIOV Virtual Function. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-03x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>Stephen Rothwell
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so remove it from there and fix up the resulting build problems triggered on x86 {64|32}-bit {def|allmod|allno}configs. The breakages were triggering in places where x86 builds relied on vmalloc() facilities but did not include <linux/vmalloc.h> explicitly and relied on the implicit inclusion via <asm/io.h>. Also add: - <linux/init.h> to <linux/io.h> - <asm/pgtable_types> to <asm/io.h> ... which were two other implicit header file dependencies. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [ Tidied up the changelog. ] Acked-by: David Miller <davem@davemloft.net> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-31hv_netvsc: Allocate the sendbuf in a NUMA aware wayK. Y. Srinivasan
Allocate the send buffer in a NUMA aware way. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31hv_netvsc: Allocate the receive buffer from the correct NUMA nodeK. Y. Srinivasan
Allocate the receive bufer from the NUMA node assigned to the primary channel. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12hv_netvsc: Use the xmit_more skb flag to optimize signaling the hostKY Srinivasan
Based on the information given to this driver (via the xmit_more skb flag), we can defer signaling the host if more packets are on the way. This will help make the host more efficient since it can potentially process a larger batch of packets. Implement this optimization. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 08:41:49 +0000