summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k
AgeCommit message (Collapse)Author
2024-12-16wifi: ath12k: fix ar->supports_6ghz usage during hw registerAditya Kumar Singh
In the ath12k_mac_hw_register() function's context, ar is an iterator variable, and there is no assurance that the last ar will be the one with 6 GHz enabled. Therefore, checking directly ar->supports_6ghz outside the loop is not appropriate. Additionally, 6 GHz lacks HT capabilities. To obtain the super set of HT capabilities across all grouped radios, 6 GHz should be excluded. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: fix ath12k_qmi_alloc_chunk() to handle too large allocationsAditya Kumar Singh
If the requested memory chunk is too large, an error message is logged, but the request continues to be processed. However, no actual memory is allocated to the firmware from this request. Instead, the firmware sends another request with smaller chunks, where memory will be allocated accordingly. Therefore, it is pointless to proceed with parsing the request if at least one of the requests cannot be fulfilled. Hence, return -EAGAIN immediately and proceed to process the new request. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: advertise multi device interface combinationKarthikeyan Periyasamy
The prerequisite for MLO support in cfg80211/mac80211 requires that all the links participating in MLO belong to the same wiphy/struct ieee80211_hw. The driver needs to group multiple discrete hardware components, each acting as a link in MLO, under one wiphy. Consequently, the driver advertises multi-hardware device interface combination capabilities specific to the radio, including supported frequencies. The global interface combination represent the combined interface capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: Refactor radio frequency informationKarthikeyan Periyasamy
Currently, radio stores the low frequency and high frequency information as separate variables. However, cfg80211 already provides a suitable data structure struct wiphy_radio_freq_range to store this information efficiently. Additionally, for multi radio per wiphy infrastructure, this frequency range information is essential. In future patches using struct wiphy_radio_freq_range makes the code simpler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: introduce interface combination cleanup helperKarthikeyan Periyasamy
Introduce a cleanup helper function to avoid redundant code for interface combination cleanup. Remove the cleanup code from ath12k_mac_hw_unregister() and ath12k_mac_hw_register() and replace it with a new cleanup helper function. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add helper function to init partner cmem configurationKarthikeyan Periyasamy
In the Inter Multi-Link Operation, the primary device is expected to receive the partner device buffer. Therefore, each device initializes the partner device buffer in their cmem configuration. So add a helper function to initialize the partner device buffer in their cmem configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add partner device buffer support in receive data pathKarthikeyan Periyasamy
Currently, partner device buffer is not handled in the receive data path. In Multi-Link Operation, the partner device buffer is reported to the primary upper MAC rings. Therefore, add partner device buffer processing in the REO and Exception ring handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: move to HW link id based receive handlingKarthikeyan Periyasamy
Currently, all the rx processing treats the hardware link id as the MAC id. The HW link id is a unique identifier for all hardware links participating in the multi link group. Therefore, the current MAC id derivation is insufficient to process the partner rx buffer in the Multi-Link Operation. So derive the MAC id from the HW link id and implementing this change in rx processing will enable the scaling of partner buffer processing in Multi-Link Operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: avoid redundant code in DP Rx error processKarthikeyan Periyasamy
Currently, in DP rx error processing, the MAC id is fetched redundantly from the same descriptor for each MSDU. To avoid this redundancy, move the fetch handling before the iteration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: enable MLO setup and teardown from coreKarthikeyan Periyasamy
In case of multi device group abstraction, host has to exchange the multi-link operation commands such as setup and ready to firmware before registering the device group to mac80211. The multi-link operation commands - setup, ready and teardown are necessary for many commands such as WMI_PEER_ASSOC_CMD, WMI_BCN_TMPL_CMD in case of multi-link interfaces. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: Add MLO WMI setup and teardown functionsBhagavathi Perumal S
In case of multi device group abstraction, host has to exchange the MLO commands such as setup, teardown and ready to firmware. Once multi device group is ready, host has to exchange MLO setup command with partner devices link information and followed by MLO ready command to firmware. During deinit, MLO teardown command should be sent to firmware. Firmware would send MLO setup complete and MLO teardown complete to host for MLO setup command and MLO teardown command respectively. Added WMI helper functions for the MLO setup, ready and teardown command and the handling for corresponding event from firmware. Add appropriate WMI tag, command id and event id to parse the event and send request. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add support to allocate MLO global memory regionKarthikeyan Periyasamy
To enable Multi-Link Operation (MLO), QCN9274 firmware requests MLO global memory (MLO_GLOBAL_MEM_REGION_TYPE). This memory region is shared across all the firmware (SoC) that are participation in the MLO. Hence, add support to allocate and free MLO global memory region. Allocate one MLO global memory per struct ath12k_hw_group and assign the same memory to all firmware in the same struct ath12k_hw_group. WCN7850 firmware does not request this memory type, therefore this change will have no impact on WCN7850 device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: refactor ath12k_qmi_alloc_target_mem_chunk()Karthikeyan Periyasamy
Currently, all QMI target memory types share the same allocation logic within ath12k_qmi_alloc_target_mem_chunk(). However, for Multi-Link Operation (MLO), the firmware requests a new MLO global memory region. This memory is shared across different firmware (SoC) participating in the MLO. To accommodate this logic change, refactor ath12k_qmi_alloc_target_mem_chunk() and introduce a helper function ath12k_qmi_alloc_chunk() for memory chunk allocation. Subsequent patch will add MLO global memory allocation logic. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: send partner device details in QMI MLO capabilityKarthikeyan Periyasamy
Currently, QMI MLO host capability is sent with the details of local links and hw_link id only for particular device. But in the case of multi device group abstraction, it has to include the details of hw_link_id, num_local_links of every partner device that is involved in the group during QMI MLO capability exchange. Add changes to send partner device details to the firmware in QMI MLO capability exchange. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: parse multiple device information from Device TreeRaj Kumar Bhagat
Currently, a single device is part of the device group abstraction. However, for multi-link operations, multiple devices need to be combined. This multi-device grouping is done via WSI (WLAN Serial Interface), which is described in the Device Tree. Information about different WSI groups and the number of devices involved in each group can be parsed from the Device Tree. Add changes to parse the Device Tree and determine WSI information, such as the different WSI groups and the number of devices per WSI group. Assign WSI index zero to the WSI controller device (to synchronize the clock among the devices within the WSI group), and increment the WSI index of each device in the order of the WSI connection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-12wifi: ath12k: fix read pointer after free in ath12k_mac_assign_vif_to_vdev()Aditya Kumar Singh
In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different radio, it gets deleted from that radio through a call to ath12k_mac_unassign_link_vif(). This action frees the arvif pointer. Subsequently, there is a check involving arvif, which will result in a read-after-free scenario. Fix this by moving this check after arvif is again assigned via call to ath12k_mac_assign_link_vif(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1636423 Fixes: b5068bc9180d ("wifi: ath12k: Cache vdev configs before vdev create") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241210-read_after_free-v1-1-969f69c7d66c@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-11wifi: ath12k: Off by one in ath12k_wmi_process_csa_switch_count_event()Dan Carpenter
The ahvif->vif->link_conf[] array has IEEE80211_MLD_MAX_NUM_LINKS elements so this should be >= instead of > to avoid an out of bounds access. Fixes: 3952657848c0 ("wifi: ath12k: Use mac80211 vif's link_conf instead of bss_conf") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/755becb1-819b-484d-8fac-9a2db53ced1b@stanley.mountain Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-11wifi: ath12k: fix leaking michael_mic for non-primary linksBaochen Qiang
In ath12k_dp_rx_peer_frag_setup(), commit ea4192553850 ("wifi: ath12k: add primary link for data path operations") checks whether a link is the primary link, and returns directly if it isn't. In ML scenario where we have non-primary links created, this results in leaking the michael_mic info since it is allocated by default but could never be freed for a non-primary link. Note that we can not move the might-sleep allocation after primary link check since there we are in atomic context (due to spin lock). So keep the default allocation, and then free it before return to fix this issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: ea4192553850 ("wifi: ath12k: add primary link for data path operations") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20241206054552.177424-1-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: introduce mlo_capable flag for device groupKarthikeyan Periyasamy
Currently, during mac80211 allocate and register single device is considered for the registration. But, in future, during multi device group abstraction is introduced, all the devices has to be combined together as a single abstraction and then hardware should be allocated. All the devices in the group should be combined together only if it supports inter device mlo capability. The decision of whether to combine the devices or not can be based on the mlo capability flag in ath12k_hw_group. By default, mlo_capable flag in the group would be set as false. During QMI PHY capability exchange, only when we have more than one chip in the group or if one chip, then that chip supports inter MLO, then mlo_capable flag in the group will be enabled. Add changes to introduce mlo_capable flag for device group and refactor ath12k_mac_hw_allocate() api based on device group (ag) rather than device (ab). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: send QMI host capability after device group is readyKarthikeyan Periyasamy
QMI host capability has the information regarding MLO parameters such as device_id, MLO capability, group id and the information of each devices involved in the group and sent immediately on QMI server arrive event. Currently, only one device is involved in the group and hence, single device information is sent as part of MLO capability of host. But, in future when multi device group abstraction is introduced, host should send all the device information involved in the group as part of QMI MLO host capability rather than single device. Hence, sending QMI host capability immediately on server arrive of a device might not be ideal for multi device group abstraction as the details of other devices in the group would not be available. Hence, once QMI server arrive event is received, request for QMI PHY capabilities of device, and defer the host capability send for that device. After QMI PHY capability is received for all the devices in the group trigger the host capability event for the deferred devices in the group. Hence, add changes to defer the QMI host capability event until the device group is ready and then resume the QMI exchange for all the device with host capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: move struct ath12k_hw from per device to groupKarthikeyan Periyasamy
Currently, hardware abstractions (ah) of different radio bands are tightly coupled to a single device (ab). But, with hardware device group abstraction (ag), multiple radios across different devices in a group can form different combinations of hardware abstractions (ah) within the group. Hence, the mapping between ah to ab can be removed and instead it can be mapped with struct ath12k_hw_group (ag). Current mapping between struct ath12k_hw (ah), struct ath12k_base (ab) and struct ath12k_hw_group (ag): +------------------------------------------------+ | +-------------------------------------+ | | | +---------------+ +---------------+ | | | | |ath12k_hw (ah) | |ath12k_hw (ah) | | | | | +---------------+ +---------------+ | | | | | | | | +-----------+ | +-----------+ | | | | | ar (2GHz) | | | ar (5GHz) | | | | | +-----------+ | +-----------+ | | | | Dual band device-1 (ab) | | | +-------------------------------------+ | | ath12k_hw_group (ag) based on group id | +------------------------------------------------+ After hardware device group abstraction moving ah array out of ab to ag: +----------------------------------------------+ | +---------------+ +---------------+ | | |ath12k_hw (ah) | |ath12k_hw (ah) | | | +---------------+ +---------------+ | | +-------------------------------------+ | | | +-----------+ +-----------+ | | | | | ar (2GHz) | | ar (5GHz) | | | | | +-----------+ +-----------+ | | | | Dual band device-1 (ab) | | | +-------------------------------------+ | | ath12k_hw_group (ag) based on group id | +----------------------------------------------+ This decoupling of struct ath12k_hw (ah) from struct ath12k_base (ab) and mapping it to struct ath12k_hw_group (ag) will help in forming different combinations of multi-link devices. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: refactor core start based on hardware groupKarthikeyan Periyasamy
Currently, mac allocate/register and core_pdev_create are initiated immediately when QMI firmware ready event is received for a particular device. With hardware device group abstraction, QMI firmware ready event can be received simultaneously for different devices in the group and so, it should not be registered immediately rather it has to be deferred until all devices in the group has received QMI firmware ready. To handle this, refactor the code of core start to have registering within ath12k_core_hw_group_start() and unregistering in ath12k_core_hw_group_stop(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: introduce device group abstractionKarthikeyan Periyasamy
Currently, single device is probed, and once firmware is ready, the device is registered to mac80211. For Multi-Link Operation, different bands of different devices or same device are part of a single wiphy and for this, hardware device group abstraction is needed. Hardware device group abstraction - when there are multiple devices (with single radio or dual radio) that are connected by any means of interface for communicating between them, then these devices can be combined together as a single group using a group id to form a group abstraction and register to mac80211. The grouping information of multiple devices would be based on device tree during device probe (will be implemented in future patches). If no such information is available, then a single device will be part of group abstraction and registered to mac80211, else multiple devices advertised in device tree are combined and then registered to mac80211. For device group abstraction, a base structure ath12k_hw_group (ag) and the helpers are implemented. These helpers are used during device probe and mapping the group to the devices involved. An illustration of how multiple devices might be combined together in future based on group id: +------------------------------------------------------------------------+ | +-------------------------------------+ +-------------------+ | | | +-----------+ | | +-----------+ | | +-----------+ | | | | | ar (2GHz) | | | | ar (5GHz) | | | | ar (6GHz) | | | | | +-----------+ | | +-----------+ | | +-----------+ | | | | ath12k_base (ab) | | ath12k_base (ab) | | | | (Dual band device) | | | | | +-------------------------------------+ +-------------------+ | | ath12k_hw_group (ag) based on group id | +------------------------------------------------------------------------+ In the above representation, two devices are combined into single group based on group id. Add base code changes where single device would be part of a group with an invalid group id forming an group abstraction. Multi device grouping will be introduced in future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: rename mlo_capable_flags to single_chip_mlo_suppAditya Kumar Singh
At present, the mlo_capable_flags in ath12k_base is used to indicate whether the chip supports inter (QCN9274) or intra (WCN7850) chip MLO. However, it’s possible that the chip supports neither, especially with older firmware versions. Additionally, if intra chip MLO is not supported, inter chip MLO will also be non-functional. Therefore, having two separate flags for this is unnecessary. Therefore, rename this flag to single_chip_mlo_supp. At the same time convert it into a bool data type. Also, get rid of the enums defined earlier. For the QCN9274 family of chipsets, this will be set only when firmware advertises the support during the QMI exchange. For the WCN7850 family of chipsets, since the event is not supported, assumption is made that single chip MLO is supported. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: move ATH12K_FLAG_REGISTERED handling to ath12k_mac_register()Karthikeyan Periyasamy
When hardware device group abstraction is introduced, a group abstraction is registered to mac80211 rather than a particular single device. So we cannot set the device registered when the QMI firmware ready event is received, only after all the devices in group have received the event. To do that set and unset ATH12K_FLAG_REGISTERED flag inside ath12k_mac_register() and ath12k_mac_unregister() respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-11-30wifi: ath12k: introduce QMI firmware ready flagKarthikeyan Periyasamy
When hardware device group abstraction is introduced, the QMI firmware ready event of different devices in a group can be received simultaneously. To indicate the firmware ready event is completed for a particular device in a group set a flag (ATH12K_FLAG_QMI_FW_READY_COMPLETE). This helps the upcoming hardware recovery implementation for hardware device group abstraction. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-5-kvalo@kernel.org
2024-11-30wifi: ath12k: add ath12k_get_num_hw()Karthikeyan Periyasamy
Currently, one or more struct ath12k_hw is part of device (struct ath12k_base) but in future, ath12k_hw would be part of device group (struct ath12k_hw_group). Hence, num_hw under device would be moved to device group. To facilitate above transition, add helper ath12k_get_num_hw() to get the number of radios per device. In future, this helper will return the number of radios in a device group. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-4-kvalo@kernel.org
2024-11-30wifi: ath12k: add ath12k_ab_to_ah() and ath12k_ab_set_ah()Karthikeyan Periyasamy
Currently, one or more ath12k_hw is part of a device (struct ath12k_base) but in future, it would be part of device group abstraction (struct ath12k_hw_group), i.e., when multiple radios (ar) across different devices can be combined together in a device group (struct ath12k_hw_group). In order to facilitate the above transition, introduce helpers ath12k_ab_to_ah() and ath12k_ab_set_ah() to get and set values of ath12k_hw respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-3-kvalo@kernel.org
2024-11-30wifi: ath12k: Refactor core startupKarthikeyan Periyasamy
In the upcoming hardware device group abstraction radios across different devices can be grouped together to support multi-link operation and register as a device group to mac80211. Currently, ath12k_mac_allocate() and ath12k_mac_register() are part of ath12k_core_start() and ath12k_core_pdev_create() respectively and are based on per device (struct ath12k_base). These APIs can be decoupled and moved out to ath12k_core_qmi_firmware_ready() itself. This refactor is helpful for device group abstraction when mac80211 allocate and register will be changed from per device (struct ath12k_base) to per device group (struct ath12k_hw_group). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-2-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_sta_rc_update(): use mac80211 provided link idKalle Valo
There's a todo comment to use mac80211 provided link id. As mac80211 now provides it use it in ath12k and remove the comment. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-11-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_set_key(): fix uninitialized symbol 'ret'Kalle Valo
Dan reported that in some cases the ret variable could be uninitialized. Fix that by removing the out label entirely and returning zero explicitly on succesful cases. Also remove the unnecessary else branches to follow more the style used in ath12k and now it's easier to see the error handling. No functional changes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7e7afd00-ad84-4744-8d94-416bab7e7dd9@stanley.mountain/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-10-kvalo@kernel.org
2024-11-29wifi: ath12k: defer vdev creation for MLORameshkumar Sundaram
Currently for single radio devices (ah->num_radio == 1) ath12k_mac_op_add_interface() creates vdev and later hw scan and assign_vif_chanctx uses the same. For MLO, vdev create request should carry ML address which will not be known during ath12k_mac_op_add_interface() as vif will be marked as ML only after links are added to it. If hw scan is requested, the vdev will be deleted post hw scan and subsequent assign_vif_chanctx call will create new vdev with ML address. But in certain cases assign_vif_chanctx could be called without any prior hw scan request and reusing the previously created vdev causes a non-ML vdev to be used for an ML vif and firmware operates the vdev in non-ML mode. Fix this by deferring vdev creation for interface until hw scan or assign_vif_chanctx request is received from mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-9-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_bss_assoc(): MLO supportAditya Kumar Singh
Currently, the ath12k_bss_assoc() function handles only deflink station connections. To support multi-link station connections, make the necessary changes to retrieve the required information from the link-level members. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-8-kvalo@kernel.org
2024-11-29wifi: ath12k: do not return invalid link id for scan linkSriram R
When a scan request is received, driver selects a link id for which the arvif can be mapped. Same link is also used for getting the link conf address. Currently, we return 0 as link id for a non ML vif, which is correct since that is the default link id. Also when any of the link vif is active and the scan request is for a channel in the active link we return its link id. But, when we don't hit both of the above cases (i.e not a ML vif or no active link vif for the channel is present) we currently return 0 as the link id. Bu the problemis that this might not work out always, eg., when only one link (eg. linkid = 1) is added to vif, then we won't find any link conf for link id 0 in the vif resulting in scan failure. During AP bringup, such scan failure causes bringup issues. Hence avoid sending link id 0 as default. Rather use a default link for scan and default link address for the same. This scan vdev will either be deleted if another scan is requested on same vif or when AP is broughtup on same link or during interface cleanup. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-7-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_station_add(): fix potential rx_stats leakRameshkumar Sundaram
If peer creation fails ar->rx_stats needs to be freed in error handling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-6-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_ampdu_action(): MLO supportSriram R
Apply tid queue setup based on all link stations on receiving ampdu action params for an ML Station. Modify ath12k_get_ar_by_vif() to fetch ar based on link arvif inside ahvif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-5-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_flush(): MLO supportSriram R
Currently when tx flush is requested for an vif only packets corresponding to deflink are flushed, with MLO multiple link arvif could be affiliated to the ML vif and packets corresponding to all of them should be flushed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-4-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_tx(): MLO supportSriram R
For a frame transmission for an ML vif, mac80211 mentions transmit link id in the tx control info. Use it to convert the RA/TA to the corresponding link sta and link vif address before enqueueing the frame for transmission. For 802.3 data frames, always enqueue the frame on the primary (assoc) link id. Firmware does the link selection, builds 802.11 header and therefore the address translation too. Also ensure right link vif is used for WMI based management transmission and add comments to document when RCU read lock is held. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-3-kvalo@kernel.org
2024-11-29wifi: ath12k: convert struct ath12k::wmi_mgmt_tx_work to struct wiphy_workKalle Valo
To simplify locking for the next patches convert struct ath12k::wmi_mgmt_tx_work to use wiphy_work. After this ath12k_mgmt_over_wmi_tx_work() is called with wiphy_lock() taken. In ath12k_core_suspend() we need to take wiphy_lock() because ath12k_mac_wait_tx_complete() requires it. Also add lockdep_assert_wiphy() to document when wiphy_lock() is held. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-2-kvalo@kernel.org
2024-11-25wifi: ath12k: Use mac80211 sta's link_sta instead of deflinkSriram R
Currently mac80211's struct ieee80211_sta deflink is used to fetch any sta related configurations in driver. With MLO multiple link sta's (struct ieee80211_link_sta) are affiliated to an ML sta and corresponding link configs are present in sta->link[]. Fetch link sta of corresponding link from ML sta and use the same for configurations. Add ath12k_mac_get_link_sta() helper to fetch ieee80211_link_sta from arsta. But as ath12k_mac_op_sta_rc_update() is called in atomic context the helper cannot be used and instead rcu_dereference() has to be called directly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-9-kvalo@kernel.org
2024-11-25wifi: ath12k: Use mac80211 vif's link_conf instead of bss_confSriram R
Currently mac80211 vif's bss_conf is used to fetch any vif related configurations in driver but with MLO multiple links are affiliated to a vif and corresponding link configs are present in vif->link_conf[]. Fetch link_conf for corresponding link from vif and use the same for configurations. Add ath12k_mac_get_link_bss_conf() helper to fetch link_conf from arvif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-8-kvalo@kernel.org
2024-11-25wifi: ath12k: modify chanctx iterators for MLORameshkumar Sundaram
Currently ath12k's chanctx iterator functions use deflink of given ahvif and bss_conf of corresponding vif to make sure the iterator returns intended vif. An ML vif can have multiple affiliated links each having its own channel context, hence iterate through the links of the given ahvif and use the link objects (arvif and link_conf) to make sure the chan ctx iterator returns intended link of the given vif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-7-kvalo@kernel.org
2024-11-25wifi: ath12k: add reo queue lookup table for ML peersRameshkumar Sundaram
Currently reoqueue tid setup uses lookup table (LUT) during peer association, but for ML peer there will be multiple link peers (belonging to different underlying firmware) affiliated to each other. Hence the reo queue should be setup only on one of the links which is the primary link. Add changes to create separate ML reo queue lookup table for ML peers and use the same while setting up rx tid for ML peer's primary link. For ML peers use ml_peer_id instead of peer_id to setup/lookup the reo queue entry in the LUT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-6-kvalo@kernel.org
2024-11-25wifi: ath12k: use arsta instead of staSriram R
Currently, struct ieee80211_sta (sta) is used for many WMI and mac80211 ops but for multi link station, driver should use struct ath12k_link_sta (arsta) instead of sta. Add changes to use arsta object for WMI commands and other mac80211 ops. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-5-kvalo@kernel.org
2024-11-25wifi: ath12k: add primary link for data path operationsSriram R
In case of Multi-link operation, data path peer setup and tid setup should be done only for primary link of multi-link station. Add changes to introduce primary link is peer. Currently, association link will be considered as primary link. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-4-kvalo@kernel.org
2024-11-25wifi: ath12k: support change_sta_links() mac80211 opSriram R
Add ath12k_mac_op_change_sta_links() for adding and removing link station. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-3-kvalo@kernel.org
2024-11-25wifi: ath12k: Add MLO station state change handlingSriram R
Add changes to handle multi-link station state change with proper link handling and add code changes for ML peer creation, peer deletion. In ath12k_mac_assign_link_sta() initialise all arsta fields first and only then call rcu_assign_pointer(). This is to make sure that readers don't have access to arsta which is still modified. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-2-kvalo@kernel.org
2024-11-21wifi: ath12k: Fix inappropriate use of print_array_to_buf_index()Roopni Devanathan
Currently in ath12k_htt_print_tx_pdev_mumimo_grp_stats_tlv() the htt_stats_buf->ul_mumimo_grp_best_usrs array is printed using print_array_to_buf_index() with a stats_index of 1. This is meant to convey the semantic that first entry in ul_mumimo_grp_best_usrs is associated with user 1. However, unlike some of the other "usr" arrays which have that semantic, ul_mumimo_grp_best_usrs does not have that semantic. Instead the first entry corresponds to user 0. Fix the issue by calling the API - print_array_to_buf(), instead of print_array_to_buf_index(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241118035722.1755373-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-21wifi: ath12k: Fix endianness issue in struct hal_tlv_64_hdrP Praneesh
struct hal_tlv_64_hdr has a 64-bit member that should be in little-endian format, but the current definition uses host byte order. Fix this by changing the definition and updating the corresponding helper functions used for the byte order conversion. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241119164516.756478-1-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support MBSSID Control Frame StatsSidhanta Sahu
Add support to request MBSSID control frame stats from firmware through HTT stats type 54. These stats give information such as basic trigger, BSR trigger, multi-user RTS and uplink MUMIMO trigger within and across various BSS. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 54. Sample output: ------------- echo 54 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_MBSSID_CTRL_FRAME_STATS_TLV: mac_id = 0 basic_trigger_across_bss = 0 basic_trigger_within_bss = 0 bsr_trigger_across_bss = 0 bsr_trigger_within_bss = 0 mu_rts_across_bss = 0 mu_rts_within_bss = 0 ul_mumimo_trigger_across_bss = 0 ul_mumimo_trigger_within_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105052854.2118987-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
generated by cgit (git 2.34.1) at 2025-07-19 16:41:57 +0000