summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath6kl
AgeCommit message (Collapse)Author
2012-04-23ath6kl: support fw reporting phy capabilitiesThomas Pedersen
Currently the supported bands are just hard coded in the driver. However, the ath6kl FW will include its 11n and band capabilites in a WMI_READY event. Handle this and report capabilites to cfg80211 accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-23ath6kl clear the MMC_PM_KEEP_POWER for cutpower caseMing Jiang
ath6kl: If wow deepsleep pno suspend failure driver will choose cutpower. in this scenario MMC_PM_KEEP_POWER should be cleared so that mmc will power off the ar6000 kvalo: remove extra parenthesis Signed-off-by: Ming Jiang <mjiang@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c include/net/nfc/nfc.h net/nfc/netlink.c net/wireless/nl80211.c
2012-04-18ath6kl: Configure probed SSID list consistentlyJouni Malinen
Set max_scan_ssids and max_sched_scan_ssids to same value. These use the same probed SSID list, so there is no point in using different maximum number of SSIDs. Clear probed SSID entries that are not used. This was already done for sched_scan, but not for scan. Be consistent and clear the table for both cases to avoid leaving bogus entries. In addition, share the same function for setting the probed SSIDs for scan and sched_scan paths. This fixes setting of wildcard SSID flag (ANY_SSID_FLAG) and changes the scan path to use probed SSID index consistently (i.e., start with 0 similarly to sched_scan; firmware will handle the needed internal mapping). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-18ath6kl: Remove incorrect Probe Response offload support for InterworkingJouni Malinen
ath6kl does not support Probe Response offloading for Interworking (IEEE 802.11u), so remove the incorrectly added capability flag for it. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-18ath6kl: Fix bug in bg scan configuration in schedule scanSubramania Sharma Thandaveswaran
Background scan interval should not be modified while starting schedule scanning as it changes the bg scan interval when connected to AP. Use the currently configured interval instead. kvalo: improve commit log Signed-off-by: Subramania Sharma <sharmat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-18ath6kl: Retain bg scan period value modified by the userRaja Mani
Added a new member bg_scan_period in struct ath6kl_vif to retain background scan period value configured via debugfs entry 'bgscan_interval'. This backup is needed in schedule scan path while configuring scan parameters. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-16ath6kl: list_first_entry() is never NULLDan Carpenter
We can remove the NULL check here. It triggers a Smatch warning because list_first_entry() never is NULL and people who check for it normally intend to check for list_empty() instead. In these cases however, we've already verified that the lists are not empty. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-16ath6kl: Normalize use of FW_DIRTim Gardner
kvalo: do the same changes for ar6004 hw1.2 as well Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-16ath6kl: allow deepsleep_suspend function when wlan interface downMing Jiang
Aafter wlan interface is down WLAN_ENABLED flags will be cleared and deepsleep_suspend function will be blocked in this senario. This patch allows deepsleep_suspend function when wlan interface down by removed the WLAN_ENABLED flag checking. kvalo: fix commit log Signed-off-by: Ming Jiang <mjiang@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-16ath6kl: Fix system crash sometimes for USB hotplugRay Chen
System crash because of NULL pointer reference due to cleanup_scatter is not implemented for USB. Signed-off-by: Ray Chen <raychen@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-16ath6kl: merge split format strings into oneKalle Valo
Found by checkpatch: WARNING: quoted string split across lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-13ath6kl: fix memory leak in ath6kl_fwlog_block_read()Jesper Juhl
If, in drivers/net/wireless/ath/ath6kl/debug.c::ath6kl_fwlog_block_read(), the call to wait_for_completion_interruptible() returns -ERESTARTSYS then we'll return without freeing the (as yet unused) memory we allocated for 'buf' - thus leaking it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2012-04-12Merge branch 'master' into for-davemJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-12ath6kl: Add AR6004 1.2 support for USB and SDIORay Chen
Add the necessary change for AR6004 1.2 chip support Signed-off-by: Ray Chen <raychen@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12ath6kl: Configure 0 as rsn cap when it is not there in rsn ieVasanthakumar Thiagarajan
Currently rsn capability is not set when it is not available in rsn IE. Set it to 0 in firmware when it is not there in the ie to make sure host and target are consistent. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12ath6kl: Fix possible unaligned memory access in ath6kl_get_rsn_capab()Vasanthakumar Thiagarajan
alignment is not taken care in accessing pairwise cipher and AKM suite count which are parsed from rsn ie. Fix this alignment issue. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12ath6kl: handle concurrent AP-STA channel switchesThomas Pedersen
If an ath6kl AP vif is beaconing on one channel, and a STA vif associates on a different channel, a WMI_DISCONNECT event will be sent to the AP vif. Make the AP vif follow the STA interface, and notify userspace. kvalo: fix a sparse warning with vif->next_chan Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12Merge remote branch 'wireless-next/master' into ath6kl-nextKalle Valo
2012-04-10ath: Add and use pr_fmt, convert printks to pr_<level>Joe Perches
Use a more current logging style. Make sure all output is prefixed appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-09ath6kl: Fix 4-way handshake failure in AP and P2P GO modeVasanthakumar Thiagarajan
RSN capability field of RSN IE which is generated (which is what really advertised in beacon/probe response) differs from the one generated in wpa_supplicant. This inconsistency in rsn IE results in 4-way handshake failure. To fix this, configure rsn capability used in wpa_supplicant in firmware using a new wmi command, WMI_SET_IE_CMDID. There is a bit (ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE) in fw_capabilities to advertise this support to driver. Signed-off-by: Subramania Sharma <sharmat@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09ath6kl: Configure htcap in fw based on the channel type in AP modeVasanthakumar Thiagarajan
This patch disables HT in start_ap if the type of the channel on which the AP mode is going to be operating is non-HT. HT is enabled with default ht cap setting if the operating channel is going to be 11n. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09ath6kl: Don't advertise HT40 support in 2.4 GhzVasanthakumar Thiagarajan
HT40 is not supported in 2.4Ghz. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09ath6kl: Fix target assert in p2p bringup with multi vifVasanthakumar Thiagarajan
Using interface 0 for p2p causes target assert. This is because interface 0 is always initialized to non-p2p operations. Fix this issue by initializing all the interfaces for p2p when fw is capable of dynamic interface switching. When fw is not capable of dynamic switching, make sure p2p is not brought up on interface which is not initialized for this purpose. Reported-by: Naveen Singh navesing@qca.qualcomm.com Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-04ath6kl: Support net_stats.multicastVasanthakumar Thiagarajan
net_stats.multicast is updated with the count of received multicast packets. kvalo: indentation changes Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-03ath6kl: Fix scan related issue on suspend-resumeVivek Natarajan
When a scan request is pending while going to suspend, any new scan request after resume will fail. So, cancel all scan requests in all the vifs before moving to suspend state. Signed-off-by: PingYang Zhang <pingzhan@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-03ath6kl: Use vmalloc instead of kmalloc for fwVivek Natarajan
Sometimes it has been observed that allocating a contiguous memory of more than 100K fails with kmalloc. This has been modified to use vmalloc instead. Signed-off-by: PingYang Zhang <pingzhan@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-02ath6kl: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-28ath6kl: Set background scan period.Bala Shanmugam
After connect command, send scan params WMI command to set background scan period. If period value is zero send 0xffff as bg scan period to disable bg scan. Set default bg scan period to be 60 seconds if not specified. This patch depends on below patch cfg80211: Add background scan period attribute. kvalo: fix open parenthesis alignment Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-28ath6kl: Store scan request info in-advance before sending SCAN requestRaja Mani
In current code, Scan request info is recorded in vif->scan_req after sending SCAN request to the firmware in ath6kl_cfg80211_scan(). In some corner cases, firmware sends SCAN_COMPLETE event immediately when it receives SCAN request, which internally executes scan complete event handler ath6kl_cfg80211_scan_complete_event() first. So, Scan completion handler will a get a chance to executed even before storing scan request info in ath6kl_cfg80211_scan(). Scan completion handler never report SCAN_COMPLETE event to cfg80211 if scan request info(vif->scan_req) is NULL. This leads to scan failure issue ("Device or resource busy error") during next SCAN request from the user space. This patch ensures that scan request info is stored before sending SCAN request. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add full USB supportKalle Valo
Now, with HTC pipe, it's possible to fully support USB version of AR6004. Based on code by Kevin Fang. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Add HTC pipe implementationKalle Valo
This is needed for USB. Based on code by Kevin Fang. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add htc opsKalle Valo
In preparation for adding HTC pipe implementation add htc-ops.h to make it possible dynamically choose which HTC type is used. Needed for full USB support. Based on the code by Ray Chen <raychen@qca.qualcomm.com>. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ray Chen <raychen@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: remove void pointer from ath6kl_credit_setup()Kalle Valo
Void pointers are bad. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add rx data padding supportKalle Valo
Needed when using USB. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add pointer to the skb in htc_packetKalle Valo
Needed by the USB code. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add tx_comp_multi() to struct htc_ep_callbacksKalle Valo
It's also needed by the USB code. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Add tx_complete() to struct htc_ep_callbacksKalle Valo
This is needed by the USB code. Also while at it replace one void pointer with a properly typed pointer. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: set ram reserved size only for ar6003Kalle Valo
Ram reserved size is not needed with ar6004. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Configure inactivity timeout in fwVasanthakumar Thiagarajan
Configure the inactivity timeout passed in start_ap() to firmware. This capability is advertised only when fw supports it, there is a new bit (ATH6KL_FW_CAPABILITY_INACTIVITY_TIMEOUT) in firmware capability ie for driver to learn fw's capability. After the fw finds out the station is inactive, it will probe the station with null func frames. By default, the timeout is 10 secs. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26Merge remote branch 'wireless-next/master' into ath6kl-nextKalle Valo
2012-03-26ath6kl: Optimize target power in deep sleep suspendRaja Mani
Adding below steps helps to get good power numbers in deep sleep suspend path, * Disable WOW mode. * Flush data packets and wait for all control packets. to be cleared in TX path before deep sleep suspend. * Set host sleep mode to SLEEP. Below steps are added to perform the recovery action while the system resume from deep sleep, * Set host sleep mode to AWAKE. * Reset scan parameters to default value. In addition, Debug prints are added to track deep sleep suspend/resume state. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Isolate host sleep mode config part from ath6kl_wow_suspendRaja Mani
The piece of code used in ath6kk_wow_suspend function to configure the host sleep mode is needed in deep sleep case also. Moving that portion to a separate function called ath6kl_update_host_mode() would be helpful to avoid the duplication of the same code in deep sleep path. There is no functional change. kvalo: move inline functions to cfg80211.c and fix a long line Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Dump htc header when invalid Rx frame length is detectedVasanthakumar Thiagarajan
Dump htc header along with the warning message when the request to Rx with invalid frame length is detected. kvalo: fix open parenthesis alignment Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-21ath6kl: abort normal scan when scheduled scan is startedKalle Valo
If the device disconnects from an AP when it is in suspending state. You will get the following message from wpa_supplicant after waking the device up and sending scan request: "Scan trigger failed: ret=-16 (Device or resource busy)" Fix the issue by sending a scan complete event before starting scheduled scan. kvalo: cosmetic changes to commit log Signed-off-by: Isaac.li <shonmou@gmail.com> Tested-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-20ath6kl: Add __printf verification to ath6kl_printkJoe Perches
Make sure printf formats and arguments match. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-18 17:46:29 +0000