summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath6kl
AgeCommit message (Collapse)Author
2012-01-05ath6kl: revert USB supportJohn W. Linville
The ath6kl driver is causing build failures when the ath6kl bits are not built as modules. A better fix is forthcoming in a future release, but for now lets revert the problematic code. This reverts the following commits: fde57764ef8751b9aca11b6f6221ac5555bda699 d70385a26ad9a122a5450d066550470107b6bc38 59d954dda4b9b3f3e61d4b87a2b26952b8c4c09d Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-02ath6kl: send TCMD response through testmode eventsThomas Pedersen
ath6kl no longer knows what it is transmitting through cfg80211_testmode, and simply passes opaque buffers between userspace and the firmware. Leave the CONT_RX enum for backwards compatibility. kvalo: change ATH6KL_TM_CMD_RX_REPORT to return -EOPNOTSUPP Signed-off-by: Thomas Pedersen <twpedersen@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Remove redundant key_index check.Vivek Natarajan
Less-than-zero comparison of an unsigned value is never true. kvalo: remove WMI_MIN_KEY_INDEX altogether, it's useless Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Add a module parameter to enable uart debugVasanthakumar Thiagarajan
To enable firmware debug messages through uart interface, modprobe ath6kl_sdio uart_debug=1. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Remove few unnecessary spin_locks around set_bit()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Support for TCP checksum offload to firmwareRishi Panjwani
The change enables offloading TCP checksum calculation to firmware. There are still some issues with the checksum offload so better to disable it by default until the issues are resolved. To enable TCP checksum offload for tx and rx paths, use the ethtool as follows: ethtool -K <interface> tx on ethtool -K <interface> rx on To disable TCP checksum offload, for tx and rx paths, use the ethtool as follows: ethtool -K <interface> tx off ethtool -K <interface> rx off kvalo: indentation changes Signed-off-by: Rishi Panjwani <rpanjwan@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Advertise TX/RX support for frames in AP modeJouni Malinen
This is needed to fix current hostapd/wpa_supplicant AP operations for frame registration. P2P GO mode already advertised these, but AP mode was forgotten and could not be used after the hostapd/wpa_supplicant frame registration changes. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Add del_station cfg80211_opsJouni Malinen
hostapd/wpa_supplicant AP mode uses this operation to flush the station entries. Implement this in ath6kl to avoid unnecessary warnings from NL80211_CMD_DEL_STATION failing. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Fix panic when setting a channelSujith Manoharan
cfg80211 could pass a NULL net_device to the driver via the set_channel() callback, when it receives a request to set the device's channel. Not handling this case properly results in this panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000cb0 IP: [<ffffffffa0374e49>] ath6kl_cfg80211_ready+0x9/0x70 [ath6kl_sdio] Call Trace: [<ffffffffa0374ed7>] ath6kl_set_channel+0x27/0x90 [ath6kl_sdio] [<ffffffffa04dfd5f>] cfg80211_set_freq+0xff/0x1d0 [cfg80211] [<ffffffffa04d3275>] ? nl80211_set_wiphy+0x85/0x660 [cfg80211] [<ffffffffa04d3198>] __nl80211_set_channel.isra.39+0x118/0x140 [cfg80211] [<ffffffffa04d34f3>] nl80211_set_wiphy+0x303/0x660 [cfg80211] [<ffffffff813678d7>] ? rtnl_lock+0x17/0x20 [<ffffffffa04ca165>] ? nl80211_pre_doit+0xb5/0x150 [cfg80211] [<ffffffff81382a45>] genl_rcv_msg+0x1d5/0x250 [<ffffffff81382870>] ? genl_rcv+0x40/0x40 [<ffffffff81381be9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81382855>] genl_rcv+0x25/0x40 [<ffffffff811354f0>] ? might_fault+0x40/0x90 [<ffffffff81381519>] netlink_unicast+0x2d9/0x320 [<ffffffff813818e6>] netlink_sendmsg+0x2c6/0x320 [<ffffffff81343800>] ? sock_update_classid+0xb0/0x110 [<ffffffff8133f52e>] sock_sendmsg+0x10e/0x130 [<ffffffff81169933>] ? mem_cgroup_update_page_stat+0x193/0x250 [<ffffffff811354f0>] ? might_fault+0x40/0x90 [<ffffffff811354f0>] ? might_fault+0x40/0x90 [<ffffffff81135539>] ? might_fault+0x89/0x90 [<ffffffff811354f0>] ? might_fault+0x40/0x90 [<ffffffff8134d126>] ? verify_iovec+0x56/0xd0 [<ffffffff8133f9e6>] __sys_sendmsg+0x396/0x3b0 [<ffffffff8108e823>] ? up_read+0x23/0x40 [<ffffffff81040e68>] ? do_page_fault+0x208/0x4e0 [<ffffffff81193151>] ? vfsmount_lock_local_unlock+0x21/0x60 [<ffffffff811947d0>] ? mntput_no_expire+0x30/0xe0 [<ffffffff8119489f>] ? mntput+0x1f/0x30 [<ffffffff81342149>] sys_sendmsg+0x49/0x90 [<ffffffff81425482>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: add support for FW API 3Kalle Valo
As firmware starting from 3.2.0.12 has some API changes and doesn't work with older versions of ath6kl we need to bump up the API version. This way we don't break anything. Also store which version of API is used and print that during boot: ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.13 api 3 Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: handle firmware names more dynamicallyKalle Valo
Currently ath6kl has just hardcoded paths to each firmware file. Change this more dynamic by separating the the directory and file name from each other. That way it's easier to dynamically create full paths to firmware and code looks better. And now it's possible to remove a function needed by devicetree code. While at it add a structure inside struct ath6kl_hw to contain all firmware names. I deliberately omitted board file support as those will be handled later. This is needed for firmware API 3. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Send own IP addr to the firmware during WOW suspendRaja Mani
Firmware ARP module requires own IP addr in order to respond to the outside world when the target is in WOW suspend state. At present, firmware ARP module has capability to hold 2 IP addr. So, WOW mode will be disabled if the total IP addr configured in net_dev for our device is greater than firmware limit (MAX_IP_ADDRS) which is 2 at this moment. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Avoid taking struct as argument in ath6kl_wmi_set_ip_cmdRaja Mani
In this way, caller is free to pass only the value of IP addr to configure. In addition to this, * 'ips' variable data type in struct wmi_set_ip_cmd is changed from __le32 to __be32 in order to match network byte order. * ipv4_is_multicast() is used to validate multicast ip addr. * New argument if_idx is added to supply correct vif index to ath6kl_wmi_cmd_send(). This will be used in the next patch. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Fix connect command to clear previously used IEsJouni Malinen
Empty IE buffer means that the new association is not supposed to include extra IEs. Make sure any previously configured (Re)Association Request frame IEs get cleared in such a case. This is based on a patch from Shuibing. Cc: Dai Shuibing <shuibing@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Use cfg80211_roamed_bss() to report roaming eventVasanthakumar Thiagarajan
This is to avoid the scenario where the bss entry of the AP got expired when reporting roaming event to current AP. As the bss entry for the current bss is available in driver, pass this bss to cfg80211. This fixes WARNING: at net/wireless/sme.c:586. This patch depends on the following patch in cfg80211 "cfg80211: Fix race in bss timeout". Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16Merge remote branch 'wireless-next/master' into ath6kl-nextKalle Valo
Conflicts: drivers/net/wireless/ath/ath6kl/init.c
2011-12-14ath6kl: support for P2P mgmt operations on station interfaceAarthi Thiruvengadam
This patch enables support for doing P2P management operations like device discovery on top of a station interface. After group formation, the station interface will become a P2P GO/client interface as the case may be. This feature requires modifications to a couple of existing WMI structures and therefore new command ids and structures have been defined in order to be compatible with older firmware versions and other chips. The exception here is the wmi_connect_cmd. Adding a new field to the end of the structure will not cause any issues with previous firmware versions since firmware only checks for minimum length of the command. The other structures are of variable length, hence it was not possible to add new fields to the end. The new command ids have to be added to the end of enum wmi_cmd_id, so it has updated to match the firmware. The driver will support both the 'old' and the 'new' commands for a while by checking the firmware capabilities. Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-14ath6kl: Support different uart_tx pin and refclk configurationRyan Hsu
AR6003 family use uart_tx=8 and refclk=26Mhz by default, and AR6004 family uses different uart_tx pin and could also support various xtal source, moves these per hw configuration. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: implement scheduled scanKalle Valo
ath6kl firmware supports scheduled scan functionality with the wow ssid filter. But the firmware does not send any events after scan results so I had to add a timer which notifies about new scan results. Sched scan needs firmware version 3.2.0.6 or later. If firmware doesn't support sched scan the driver will not enable the feature. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: fix reading of FW IE capabilitiesKalle Valo
For some strange reason I used ALIGN() to calculate index to the buffer. That is totally bogus and wouldn't work when it tried to read the second bit. Fix it by removing the ALIGN() altogether. Also check that ie_len is not too short. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: fix value of WOW_FILTER_SSIDKalle Valo
According to the firmware engineers WOW_FILTER_SSID is actually the second bit, not the first. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: implement ath6kl_cfg80211_stop_all()Kalle Valo
During suspend we need to stop all vifs, not just the first. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: call ath6kl_cfg80211_stop() from ath6kl_close()Kalle Valo
This way it's possible to keep all disconnect logic in one function and easier to add new functionality, like stopping scheduled scan. There are some changes to commands called during network interface close, but there should not be any visible changes in functionality. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: remove a workaround from ath6kl_cfg80211_stop()Kalle Valo
There's a workaround in ath6kl_cfg80211_stop() which emits disconnected even when sme_state was disconnected. This is legacy from the old staging driver and I can't repoduce the old problem anymore. I assume the bug got fixed while the driver was cleaned up so let's get rid of the hack. This makes it possible to call ath6kl_cfg80211_stop from ath6kl_close() which happens in a followup patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: cleanup ath6kl_priv()Kalle Valo
It really should not return a void pointer. Also remove useless casts from its users. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: Use delayed key configuration for WAPI in AP modeJouni Malinen
This is needed to allow WAPI AP to configure the initial group key to the target in the same way as is done with TKIP/CCMP. This fixes broadcast data frame delivery with the initial group key. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: Increase the maximum number of connections in AP modeVasanthakumar Thiagarajan
The maximum number of clients which ath6kl can support in AP mode is 10. The limitation of 8 connections is only for older chipsets which ath6kl does not support. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: remove unused sc_params from struct ath6klKalle Valo
It was only initialised but not used anywhere. Also remove two defines which ended up unused after this change. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: fix ath6kl's set tx powerLuis R. Rodriguez
ath6kl assumed cfg80211 passed to us power in dBm but it is in mBm. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: use a larger buffer for debug outputDan Carpenter
The return value of snprintf() is the number of bytes which would have been copied if there was enough space, but we want the number of bytes actually copied. The scnprintf() function does this. Also in theory, a %u can take take 10 digits so we may as well make the buffer larger as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Conflicts: drivers/net/wireless/iwlegacy/iwl-debugfs.c drivers/net/wireless/iwlegacy/iwl-rx.c drivers/net/wireless/iwlegacy/iwl-scan.c drivers/net/wireless/iwlegacy/iwl-tx.c include/net/bluetooth/bluetooth.h
2011-11-21cfg80211: add flags for off-channel capabilitiesJohannes Berg
Currently mac80211 implements these for all devices, but given restrictions of some devices that isn't really true, so prepare for being able to remove the capability for some mac80211 devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21ath6kl: Use mutex to protect dma buffer in sync read writeRaja Mani
Firmware crashes while starting Soft AP in 32 bit x86 platform. The reason is that the single dma buffer (ar_sdio->dma_buffer) is used in ath6kl_sdio_read_write_sync() for unaligned buffer handling and this function is called in the multiple context at the same time. So, finally hits dma buffer corruption and firmware crash. Mutex is used to protect dma buffer to avoid data corruption. Spin lock can not used to fix this issue since mmc stack read/write calls may for sleep. Observed this issue with recently commited patch "ath6kl: Claim sdio function only at appropriate places" 861dd058f495973c7ad2a44b8f68f3cc05733eab kvalo: change name of mutex to more descriptive and add a comment about what it protects Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-21ath6kl: unlock if ath6kl_cfg80211_connect() failsDan Carpenter
There is an unlock missing on this error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-21ath6kl: Enable multiple vif supportVasanthakumar Thiagarajan
The maximum number of supported virtual interfaces are 3. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-21ath6kl: Find ar->max_norm_iface in firmware IE parsingVasanthakumar Thiagarajan
Currently the max number of vifs which can be used for non-p2p mode is determined in ath6kl_core_alloc(). But the maximum supported vifs are parsed from firmware IE in ath6kl_fetch_fw_api2() which would happen after ath6kl_core_alloc(). Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-21ath6kl: Remove modparam multi_norm_if_supportVasanthakumar Thiagarajan
This modparam was introduced to enable non-p2p mode operation on two virtual interfaces. It does not seem to be necessary to have a separate module parameter to do that. Instead, this option can be enabled when any one of the interfaces is not going to be used for p2p (ath6kl_p2p). Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-21ath6kl: indicate probe-resp offload supportArik Nemtsov
The ath6kl responds to probe-requests in HW while operating as an AP. It supports offloading exclusions to support the WPS, WPS2, P2P and 802.11u protocols. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: Fix AP mode operation after interface down/upVasanthakumar Thiagarajan
When operating AP interface is brough down the mode is reset to STA. This STA will be reconfigured into AP mode when the interface is brought up again. This sequence will be successful only when change_virtual_intf() returns with no error, but there is a check in this callback which does the type change only when that interface is active. This callback does nothing more than saving the new interface type to vif and wdev, so the sanity check for interface state and wmi state is not necessary. This makes the AP interface functional again after interface down/up. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: Clear WPS ctrl flag if zero length IE is received from cfg80211Raja Mani
Connect control flag CONNECT_WPS_FLAG has to be cleared by default even if the driver receives zero length IE from cfg80211. Otherwise this flag would be always set after WPS exchange which would lead wpa_supplicant to fail to connect with the received WPS credentials. This issue is observed only in OPEN security. kvalo: use cfg80211 instead of CFG in the commit log Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add firmware IE for maximum number of vifsKalle Valo
Not all firmwares support multiple vifs and we need to read the limit from the firmware image. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: make maximum number of vifs runtime configurableKalle Valo
Needed when detecting how many vifs firmware supports. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add firmware filename info to struct ath6kl_hwKalle Valo
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add ar6004 firmwares to sdio moduleKalle Valo
When adding ar6004 SDIO support I forgot to add corresponding MODULE_FIRMWARE() definitions to sdio.c. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: use hardware version names consistentlyKalle Valo
Part of ath6kl uses "REV3" style of naming hardware versions and elsewhere "hw 2.1.1" is used instead for the same version. This is confusing, use the latter term everywhere. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add name field to struct ath6kl_hwKalle Valo
To make it easier to print name for each hardware type. Also move the hw info print to ath6kl_init_hw_start() which is more logical place for it. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add firmware IE for board data addressKalle Valo
Board data address can change between firmwares so we need to read that from the firmware image. Also fix debug log for the patch address to print the address in hex. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16ath6kl: add board address to struct ath6kl_hwKalle Valo
This is to make it configurable by firmware IEs. Also determine if we need to write or read the board address to the chip by checking if board address is set or not. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-19 05:48:14 +0000