summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wcn36xx
AgeCommit message (Collapse)Author
2020-12-09wcn36xx: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
2020-12-02wcn36xx: Send NULL data packet when exiting BMPSBryan O'Donoghue
This commit updates the BMPS exit path to be consistent with downstream in terms of exiting BMPS mode. Downstream sets the flag to send a NULL data frame to the host on exiting BMPS. This will tell the AP to send any queued frames to the STA immediately. Verified the relevant bit toggle in wireshark. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201120021403.2646574-2-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Enable firmware offloaded keepaliveBryan O'Donoghue
This patch calls wcn36xx_smd_keep_alive_req() on the STA patch immediately after associating with an AP. This will cause the firmware to send a NULL packet out to the AP every 30 seconds, thus offloading keep-alive processing from the SoC to the firmware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-4-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Enable firmware link monitoringBryan O'Donoghue
This patch switches on CONNECTION_MONITOR. Once done it is up to the firmware to send keep alive and to monitor the link state. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-3-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Set LINK_FAIL_TX_CNT to 1000 on all wcn36xxBryan O'Donoghue
The firmware parameter LINK_FAIL_TX_CNT maps to the prima configuration file parameter gLinkFailTxCnt and is described as: quote: " If within gLinkFailTimeout period(values is mentioned in msec) if FW doesn't receive acks for gLinkFailTxCnt number of packets, then link will be disconnected." The downstream description sets a minimum value of 1000 a maximum value of 60000 and a default value of 6000, however it appears that unless we actually set this value deliberately firmware defaults it to 0. Setting this value to non-zero results in the firmware doing link monitoring. The working example from downstream paradoxically sets the value to 200, here we opt to set the value to the minimum stipulated in the configuration file 1000. In conjunction with ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR); this change effects offload of link monitoring to the firmware. Tested with: 'CNSS-PR-2-0-1-2-c1-74-130449-3' wcn3620 'CNSS-PR-2-0-1-2-c1-00083' wcn3680 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-2-bryan.odonoghue@linaro.org
2020-10-01wcn36xx: Advertise beacon filtering support in bmpsLoic Poulain
In bmps mode, beacons are filtered, and firmware is in charge of monitoring the beacons and report changes or loss. mac80211 must be advertised about such change to prevent it's internal timer based beacon monitor to report beacon loss. Fix that by setting/clearing the IEEE80211_VIF_BEACON_FILTER vif flag on bmps entry/exit. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592471863-31402-2-git-send-email-loic.poulain@linaro.org
2020-09-22wcn36xx: Ensure spaces between functionsBryan O'Donoghue
This is a small update to fix an error I saw where a few functions do not have a blank line in between them. Affects smd.c and main.c - no logic is affected by this change. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150845.2179320-3-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Mark internal smd functions staticBryan O'Donoghue
This commit marks all smd.c functions that are only used inside of smd.c as static. Previous commits added some VHT specific setup functions non-static which is the right thing to do in terms of having granular git commits that compile warning free. What we really want is for local not global scope on those functions. This patch makes the conversion from global to local scope. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150845.2179320-2-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Advertise ieee802.11 VHT flagsBryan O'Donoghue
This patch adds ieee802.11 VHT flags for the wcn3680b. - RX_STBC1 - SU Beamformee - MU Beamformee - VHT80 SGI - Single spatial stream RX LDPC is declared as supported in the datasheet but not enabled at this time. After this patch is applied an AP should see the wcn3680 as an 802.11ac capable device. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150822.2179261-5-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates()Bryan O'Donoghue
This commit adds VHT rates to the wcn36xx_update_allowed_rates() routine. Thus allowing the driver to latch the declared rates and transmit them to the firmware in the same way as other 80211.n rates are. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150822.2179261-4-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Convert to VHT parameter structure on wcn3680Bryan O'Donoghue
In order to send VHT parameters to wcn3680 we need to pass the extended V1 parameter structures to the firmware. These commands need to have the version number set to 1. This patch makes the conversion. The conversion consists of 1. Setting the version number for wcn3680 or leaving it at 0 otherwise 2. Setting the size of the packet header lower for wcn3620 and wcn3660 Once done all three chips can continue to use the same code to pass parameters to their respective firmware. In the case of the wcn3680 the passed structures will be slightly larger to accommodate communication of VHT descriptors. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150822.2179261-3-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Define INIT_HAL_MSG_V1()Bryan O'Donoghue
In order to pass 802.11ac VHT parameters from the SoC to wcn36xx we need to use the V1 data structures associated with BSS and STA parameters. The means of identifying a V1 data-structure is via the SMD version field. This patch defines a INIT_HAL_MSG_V1() which operates the same way as INIT_HAL_MSG() with the exception that it defines VERSION1 as opposed to VERSION0. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150822.2179261-2-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Latch VHT specific BSS parameters to firmwareBryan O'Donoghue
This commit makes use of wcn36xx_smd_set_bss_vht_params() to extract VHT parameters from the 80211_sta structure and latch appropriate bits in the bss_params_v1 structure for transmission to the wcnss firmware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150747.2179122-5-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Add ability to download wcn3680 specific firmware parametersBryan O'Donoghue
This commit modifies wcn36xx_smd_start() so that it can download wcn3680 specific firmware parameters if we are talking to the wcn3680. If not the original generic firmware parameter table should continue to be used for wcn3620 and wcn3660. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150747.2179122-4-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Define wcn3680 specific firmware parametersBryan O'Donoghue
This commit defines a firmware configuration for the wcn3680 which represents a working downstream configuration. This configuration has been successfully applied to the upstream driver with antecedent patches resulting in the same or better through-put in comparison to the downstream driver on the test hardware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150747.2179122-3-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Extend HAL param config listBryan O'Donoghue
In order to get 802.11ac working the way we want, additional parameters need to be passed down to the firmware. This patch takes the full remaining set of parameters defined in the downstream riva/inc/wlan_hal_cfg.h and imports them into hal.h with some minor name length adjustments. This addition will allow us to pass a larger firmware configuration set later on. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150747.2179122-2-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Set PHY into correct mode for 80MHz channel widthBryan O'Donoghue
For the 80MHz channel we need to set the PHY mode to one of four PHY modes that span the 80MHz range. This patch latches the hw_value PHY field previously defined for 5GHz channels directly to the parameter passed to the firmware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150708.2179043-6-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Encode PHY mode for 80MHz channel in hw_valueBryan O'Donoghue
This commit encodes the 802.11ac PHY mode for a given channel in the upper bits of the hw_value field. This allows for a neat read-out and application of the relevant PHY setting. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150708.2179043-5-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Add accessor macro HW_VALUE_PHY for PHY settingsBryan O'Donoghue
Adds HW_VALUE_PHY(hw_value) an access macro that will be used to extract a hardware specific PHY setting for a given channel. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150708.2179043-4-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Use HW_VALUE_CHANNEL macro to get channel numberBryan O'Donoghue
Uses HW_VALUE_CHANNEL() to extract the channel number from a struct ieee80211_channel->hw_value. Once done we can use the upper bits of the hw_value to encode PHY related data. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150708.2179043-3-bryan.odonoghue@linaro.org
2020-09-22wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channelsBryan O'Donoghue
Adds HW_VALUE_CHANNEL(hw_value) an access macro that will be used to extract the channel number from struct ieee80211_channel->hw_value in preparation for also storing PHY settings for 802.11ac in the upper bits of hw_value. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150708.2179043-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Remove dead code in wcn36xx_smd_config_bss()Bryan O'Donoghue
wcn36xx_smd_config_bss_v0() and wcn36xx_smd_config_bss_v1() have been designed to operate in standalone fashion. As a result we can drop the dead code now present in wcn36xx_smd_config_bss() and happily remove one kzalloc from the BSS config path as we do so. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-8-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Convert to using wcn36xx_smd_config_bss_v0()Bryan O'Donoghue
A previous patch added wcn36xx_smd_config_bss_v0() this patch converts the version 0 data-path in wcn36xx_smd_config_bss() to use wcn36xx_smd_config_bss_v0(). Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-7-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_config_bss_v0Bryan O'Donoghue
This commit adds wcn36xx_smd_config_bss_v0() as a step along the road of functionally decomposing wcn36xx_smd_config_bss(). Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internallyBryan O'Donoghue
This patch updates wcn36xx_smd_config_bss_v1() to update on internally derived parameters only, specifically making use of STA v1 wrapper routines previously added. Once done we no longer need to pass a struct wcn36xx_hal_config_bss_req_msg which gives us options in later patches to eliminate the kzalloc() in wcn36xx_smd_config_bss entirely. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()Bryan O'Donoghue
This commit moves BSS parameter setup to a separate function wcn36xx_smd_set_bss_params(). This will allow for further functional decomposition and fewer kzalloc() operations in subsequent patches. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()Bryan O'Donoghue
In order to facilitate functional decomposition of wcn36xx_smd_config_bss() we need to move wcn36xx_smd_set_sta_params() later in function. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Functionally decompose wcn36xx_smd_config_sta()Bryan O'Donoghue
This commit functionally decomposes wcn36xx_smd_config_sta into a clearly defined wcn36xx_smd_config_sta_v0 and wcn36xx_smd_config_sta_v1 path. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()Bryan O'Donoghue
This commit adds a wrapper function wcn36xx_smd_set_sta_params_v1() which calls into wcn36xx_smd_set_sta_params() and then subsequently sets version-1 specific parameters. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-8-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_bss_vht_params()Bryan O'Donoghue
This commit adds wcn36xx_smd_set_bss_vht_params(). The job of this function is to decide if the BSS is VHT capable and if so set the appropriate bit in the BSS parameter structure for passing to the firmware. VHT Channel width set is not set since we don't support 160MHz. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-7-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()Bryan O'Donoghue
Adds a routine to allow setting the LDPC bit for HT parameter passing inside the version 1 STA parameters data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_vht_params()Bryan O'Donoghue
This commit adds support for setting VHT parameters based on the declared VHT capability bits in the VHT capability structure. We cannot do 160MHz so VHT Channel width set should be zero. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()Bryan O'Donoghue
Toggling the LDPC enabled bit is possible only via the extended V1 data-structure. This function provides a means of setting the default depending on chip-type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()Bryan O'Donoghue
This commit adds support for setting default VHT parameters, which are exposed by the extended version 1 STA parameter type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_set_default_rates_v1Bryan O'Donoghue
Add a routine to set some additional default parameters associated with the V1 data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Use V1 data structure to store supported ratesBryan O'Donoghue
This patch converts the internal data structure used to store data-rates from version 0 to version 1. This allows us to extend out the internal storage to represent VHT parameters. Using the extended version 1 data-structure allows us to avoid a whole raft of version 1 specific fixup functions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add VHT fields to parameter data structuresBryan O'Donoghue
In order to pass VHT parameters to wcn3680 we need to use a super-set of the V1 data-structures with additional VHT parameters tacked on. This patch adds the additional fields to the STA and BSS parameter structures. Since neither wcn3620 nor wcn3660 support VHT the size of the passed message is fixed to the previous message length. Subsequent changes will differentiate between wcn3620/wcn3660 and wcn3680 which does use the larger message size. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-2-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Set feature DOT11AC for wcn3680Bryan O'Donoghue
In order for the firmware to process extended V1 parameters with the addtional VHT fields added we need to first enable the feature bit DOT11AC. Once done the version number in the HAL message header will be acted upon by the firmware. Extended V1 parameters are a prerequisite for 802.11ac speeds since we cannot communicate VHT parameters to the firmware absent the extended data structures. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-11-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Use existing pointers in wcn36xx_smd_config_bss_v1Bryan O'Donoghue
Two pointers are already defined in this function "bss" and "sta" which point to fields within msg_body->bss_params. We can substantially reduce the amount of extraneous text in this function by making use of those pointers. This change makes the code easier to read and modify. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-10-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add Supported rates V1 structureBryan O'Donoghue
This commit adds the supported rates V1 structure as defined in Prima riva/inc/wlan_hal_msg.h Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-9-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add 802.11ac HAL param bitfieldsBryan O'Donoghue
This patch enumerates four previously unused bits in wcn36xx_hal_config_sta_params_v1 describing - HT LDPC enable - VHT LDPC enable - VHT TX BF enable - VHT MU Beamformee enable Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-8-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Specify ieee80211_rx_status.nssBryan O'Donoghue
Specify the number of spatial streams in ieee80211_rx_status. For non VHT data-rates the wireless core doesn't care about this field, however for VHT data-rates it does. Every version of wcn36xx has one spatial stream, so specify nss for wcn3620, wcn3660 and wcn3680 now. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-7-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Fix warning due to bad rate_idxLoic Poulain
The rate_idx is the index of the bitrate in the supported rate table. However the 5Ghz band has a smaller legacy bitrate table than 2.4Ghz since it does not have the DSSS bitrates (1, 2, 5.5, 11). So in 5Ghz band the index should adjusted accrodingly (-4). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [bod: Made sure fix is only applied if the rate_idx > n_bitrates] Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-6-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add 802.11ac MCS ratesBryan O'Donoghue
This commit incorporates the 802.11ac table defined in downstream into upstream wcn36xx. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-5-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Hook and identify RF_IRIS_WCN3680Bryan O'Donoghue
If DT indicates we are dealing with a WCN3680 mark the rf_id field as RF_IRIS_WCN3680 allowing for further chip-specific logic. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-3-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add a chip identifier for WCN3680Bryan O'Donoghue
The WCN3680 has some specific behaviours that we want to capture to distinguish it from the WCN3620 and WCN3660 respectively. Add an identifier for this purpose. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-2-bryan.odonoghue@linaro.org
2020-08-27wcn36xx: Disable bmps when encryption is disabledLoic Poulain
For whatever reason, when connected to an open/no-security BSS, the wcn36xx controller in bmps mode does not forward 'wake-up' beacons despite AP sends DTIM with station AID. Meaning that AP is not able to wakeup the station and needs to wait for the station to wakeup by its own (TX data, keep alive pkt...), causing serious latency issues and unexpected deauth. When connected to AP with encryption enabled, this issue does not occur. So a simple workaround is to only enable bmps support in that case. Ideally, it should be propertly fixed to allow bmps support with open BSS, whatever the issue is at driver or firmware level. Tested on wcn3620 and wcn3680. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598363127-26066-1-git-send-email-loic.poulain@linaro.org
2020-08-27wcn36xx: Setup starting bitrate to MCS-5Loic Poulain
By default, after associated to an AP, the wcn36xx bitrate adjustment algorithm starts sending data at 1Mbps, and increases the rate slowly (1Mbps, 2Mbps, 6Mbps...) over the further TX packets. Starting at 1Mbps usually causes the initial throughput to be really low and the maximum possible bitrate to be reached after about hundreed of TX packets. That can be improved by setting a different initial bitrate for data packets via the ENABLE_DYNAMIC_RA_START_RATE configuration value, this value can be a legacy or MCS rate. This patch sets the starting bitrate value to MCS-5, which seems to be a good compromise given it can be quickly adjusted low or up if necessary. (and based on what I observed in the wild with some mobile devices) Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598345341-4505-1-git-send-email-loic.poulain@linaro.org
2020-08-27wcn36xx: Fix software-driven scanLoic Poulain
For software-driven scan, rely on mac80211 software scan instead of internal driver implementation. The internal implementation cause connection trouble since it keep the antenna busy during the entire scan duration, moreover it's only a passive scanning (no probe request). Therefore, let mac80211 manages sw scan. Note: we fallback to software scan if firmware does not report scan offload support or if we need to scan the 5Ghz band (currently not supported by the offload scan...). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598288035-19790-1-git-send-email-loic.poulain@linaro.org
2020-08-17wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680Bryan O'Donoghue
Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here. This patch fixes the data-rate declared in the 5GHz table. Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802004824.1307124-1-bryan.odonoghue@linaro.org
generated by cgit (git 2.34.1) at 2025-07-16 08:55:13 +0000