summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2025-05-19wifi: ath12k: Reorder and relocate the release of resources in ↵Yingying Tang
ath12k_core_deinit() Ath12k panic notifier is registered in driver loading process. But it is not unregistered if ATH12K_FLAG_QMI_FAIL is set(e.g. load BDF failed) and unload driver. It causes a dirty node in panic notifier list since ath12k panic notifier is not unregistered from list but the buffer of this node is freed in driver unloading process. If load driver again there will be a page fault error due to this dirty node in panic notifier list. This issue is caused by asymmetry between ath12k_core_init() and ath12k_core_deinit(). Reorder and relocate the release of resources in ath12k_core_deinit() to avoid this asymmetry issue. Call Trace: <TASK> ? show_regs+0x67/0x70 ? __die_body+0x20/0x70 ? __die+0x2b/0x40 ? page_fault_oops+0x15d/0x500 ? search_bpf_extables+0x63/0x90 ? notifier_chain_register+0x21/0xe0 ? search_exception_tables+0x5f/0x70 ? kernelmode_fixup_or_oops.isra.0+0x61/0x80 ? __bad_area_nosemaphore+0x179/0x240 ? bad_area_nosemaphore+0x16/0x20 ? do_user_addr_fault+0x312/0x7f0 ? prb_read_valid+0x1c/0x30 ? exc_page_fault+0x78/0x180 ? asm_exc_page_fault+0x27/0x30 ? notifier_chain_register+0x21/0xe0 ? notifier_chain_register+0x55/0xe0 atomic_notifier_chain_register+0x2c/0x50 ath12k_core_init+0x7e/0x110 [ath12k] ath12k_pci_probe+0xaba/0xba0 [ath12k] Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 809055628bce8 ("wifi: ath12k: add panic handler") Signed-off-by: Yingying Tang <quic_yintang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250423055650.16230-2-quic_yintang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: print device dp stats in debugfsVinith Kumar R
Print the data path related device specific stats in debugfs. These device_dp_stats are exposed in the ath12k debugfs directory. Output of device_dp_stats: root@CDCWLEX0799743-LIN:/home/qctest# cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/device_dp_stats DEVICE RX STATS: err ring pkts: 0 Invalid RBM: 0 RXDMA errors: Overflow: 0 MPDU len: 0 FCS: 0 Decrypt: 0 TKIP MIC: 0 Unencrypt: 0 MSDU len: 0 MSDU limit: 0 WiFi parse: 0 AMSDU parse: 0 SA timeout: 0 DA timeout: 0 Flow timeout: 0 Flush req: 0 AMSDU frag: 0 Multicast echo: 0 AMSDU mismatch: 0 Unauth WDS: 0 AMSDU or WDS: 0 REO errors: Desc addr zero: 0 Desc inval: 0 AMPDU in non BA: 0 Non BA dup: 0 BA dup: 0 Frame 2k jump: 0 BAR 2k jump: 0 Frame OOR: 155 BAR OOR: 0 No BA session: 0 Frame SN equal SSN: 0 PN check fail: 0 2k err: 0 PN err: 0 Desc blocked: 0 HAL REO errors: ring0: 0 ring1: 0 ring2: 0 ring3: 0 ring4: 0 ring5: 0 ring6: 0 ring7: 0 DEVICE TX STATS: TCL Ring Full Failures: ring0: 0 ring1: 0 ring2: 0 ring3: 0 Misc Transmit Failures: 0 tx_wbm_rel_source: 0:986 1:0 2:0 3:57 4:0 tqm_rel_reason: 0:1043 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 14:0 fw_tx_status: 0:57 1:0 2:0 3:0 4:0 5:0 6:0 tx_enqueued: 0:329 1:145 2:464 3:105 tx_completed: 0:329 1:145 2:464 3:105 radio0 tx_pending: 0 REO Rx Received: Ring1: 0:201 1:0 2:0 Ring2: 0:0 1:0 2:0 Ring3: 0:6152 1:0 2:0 Ring4: 0:9 1:0 2:0 Ring5: 0:0 1:0 2:0 Ring6: 0:0 1:0 2:0 Ring7: 0:0 1:0 2:0 Ring8: 0:0 1:0 2:0 Rx WBM REL SRC Errors: TQM: 0:0 1:0 2:0 Rxdma: 0:0 1:0 2:0 Reo: 0:155 1:0 2:0 FW: 0:0 1:0 2:0 SW: 0:0 1:0 2:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-4-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Add device dp stats supportVinith Kumar R
Add support for data path related device specific stats. This information helps to debug connectivity and performance issues in AP, STA, and Mesh modes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-3-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: change soc name to device nameVinith Kumar R
To have consistent nomenclature, replace the use of the term "soc" with the term "device". Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-2-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Fix invalid RSSI values in station dumpP Praneesh
When processing a "station dump" command, the driver retrieves RSSI values from the HAL_PHYRX_RSSI_LEGACY TLV received from the monitor destination ring, and reports them to userspace. Currently, the RSSI values reported are improper because the hardware has not been configured to update them properly. To fix this, enable the HTT_RX_FILTER_TLV_FLAGS_PPDU_START_USER_INFO in the filter setup to ensure the correct RSSI values are returned in the HAL_PHYRX_RSSI_LEGACY TLV, resulting in correct RSSI values being reported to userspace. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Signed-off-by: Sowjanya vardhineni <quic_svardhin@quicinc.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250424055104.2503723-1-quic_svardhin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: pass link_conf for tx_arvif retrievalAloka Dixit
Three out of four callers to ath12k_mac_get_tx_arvif() have link_conf pointer already set for other operations. Pass it as a parameter. Modify ath12k_control_beaconing() to set link_conf first. Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-4-aloka.dixit@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: update EMLSR capabilities of ML StationRamasamy Kaliappan
When EMLSR operation is enabled for an ML Station, EMLSR transition timeout, padding delay and transition delay should be updated to Firmware. Above parameters will be used by Firmware to do EMLSR operation such as sending EML operation mode notification frame, initial control frame etc. Obtain above parameters from EML capabilities information present in ieee80211_sta object and update the same to Firmware in peer assoc WMI command sent for ML station. MLO is not enabled in WCN7850 and hence this change is not applicable to it as of now. This can be a leverage once it is enabled in future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250327051320.3253783-5-quic_ramess@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Prevent multicast duplication for dynamic VLANMuna Sinada
Since dynamic VLAN traffic is software encrypted and encapsulated, mac80211 handles the duplication on each link for MLO dynamic VLAN multicast. Currently in ath12k_mac_op_tx(), all multicast frames are duplicated and are assigned a mcbc_gsn. This is causing dynamic VLAN multicast traffic to be dropped in hardware. Prevent dynamic VLAN multicast traffic from being duplicated again in the driver. Check if incoming packet is a dynamic VLAN packet and avoid defaulting to multicast conditional. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250424221404.1262597-1-muna.sinada@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Enable AST index based address search in Station ModeThiraviyam Mariyappan
Currently, TCL performs the TX address search for each entry during transmission, which may lead to packet delays. To mitigate this issue, enable AST index-based address search during transmission in station mode. This AST index-based search is not enabled in AP mode due to the complexity involved in fetching peer information. Implement changes to retrieve the offset of ast_idx/ast_hash values from the PEER_MAP3 event, update the vdev search type to ADDRX, and enable AST lookup in the bank configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250422094255.131226-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: enable monitor mode for WCN7850Kang Yang
Enable monitor mode for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-14-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use different packet offset for WCN7850Kang Yang
In ath12k_dp_mon_rx_merg_msdus(), will set packet offset to 8. This is a right value for QCN9274. But WCN7850 use different hardware rings for monitor mode because it doesn't have RX MON component. So the packet offset is different. With current offset, upper-layer application will failed to parse the payload correctly. Should use different value for those who don't have RX MON component. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-13-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: init monitor parameters for WCN7850Kang Yang
Some monitor parameters are only initialized for QCN9274, but WCN7850 also needs them, so initialize them for WCN7850 as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-12-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add support to reap and process mon dest ringKang Yang
WCN7850 uses error dst ring as mon dest ring. Each time hardware receives a packet, will fill the payload into mon dest ring. The mon dest ring may store many MSDUs, which belonged to different MPDUs. Need to retrieve MSDUs based on the PPDU ID, only processing the MSDUs with same PPDU ID each time. The PPDU ID is used in cycles, the difference between the PPDU IDs of the two rings must be checked. If the status PPDU ID minus the dest PPDU ID is greater than 20000, it is considered a wrap-around case. After reaping the mon dest ring, should prepare packet and deliver it to mac80211 when status PPDU ID is equal to dest PPDU ID. Then start to process next PPDU if exists. But if dest PPDU ID > status PPDU ID, should hold on to mon dest ring processing. If it exceeds 16 consecutive times, status PPDU ID will be forcibly set to dest PPDU ID to avoid backpressure issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-11-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use ath12k_buffer_addr in ath12k_dp_rx_link_desc_return()Kang Yang
Currently, ath12k_dp_rx_link_desc_return() takes struct hal_reo_dest_ring as its second input. This struct is converted to struct hal_wbm_release_ring and passed into ath12k_hal_rx_msdu_link_desc_set(), where it is converted again. This double conversion is both strange and inefficient. In ath12k_hal_rx_msdu_link_desc_set(), only buf_addr_info is actually used. To simplify the code and improve readability, directly passes buf_addr_info when calling ath12k_dp_rx_link_desc_return(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-10-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GETKang Yang
Currently, HAL_RX_MSDU_PKT_LENGTH_GET uses u32_get_bits to obtain the MSDU length from the MSDU description. This is not right. Because all halphy descriptions are little endian. So use le32_get_bits for HAL_RX_MSDU_PKT_LENGTH_GET. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-9-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add support to reap and process monitor status ringKang Yang
WCN7850 uses monitor status ring to store status buffer. Status buffer contains many TLVs such as MPDU START/END. From these TLVs, can get necessary information about related payload, such as PPDU ID. Add helper function to reap status buffer from monitor status ring so that can parse TLVs later by ath12k_dp_mon_parse_rx_dest(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-8-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add monitor mode handler by monitor status ring interruptKang Yang
Monitor status ring interrupt is configured in previous patch. So add handler function __ath12k_dp_mon_process_ring() for monitor mode. Will implement detail processing in patch 7 and 10. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-7-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add interrupt configuration for mon status ringKang Yang
The monitor mode design is: 1. Hardware captures packets on the air. 2. Hardware stores the packets into related rings. 3. When the ring buffer reaches the interrupt threshold, it triggers the interrupt. 4. Reap and process the ring buffer in ath12k_dp_service_srng(). Here the interrupt thresholds are intr_timer_thres_us, low_threshold and intr_batch_cntr_thres_entries. An interrupt will be triggered once: 1. Number of packets in the ring reaches intr_batch_cntr_thres_entries. 2. Number of packets in the ring reaches low_threshold(by timer). 3. Timer reaches intr_timer_thres_us. So, add interrupt configuration for the mon status ring, then start to process ring buffers when the interrupt arrives. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-6-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add ring config for monitor mode on WCN7850Kang Yang
For WCN7850, it doesn't have an RX MON component(RX MON dest ring and RX MON buffer ring). So it can only reuse the mon status ring, RX refill ring, and error dst ring for monitor mode. Every time the hardware captures a packet, it will store status information into the status ring and store the MSDU payload buffer address into the error dst ring. When host reaps the MSDU payload and consumes a buffer, it will replenish the RX refill ring to indicate a new buffer. The configuration of the error dst/RX ring already exists. But there is no configuration for mon status ring. So add ring configuration for it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-5-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add srng config template for mon status ringKang Yang
Currently, the hw_srng_config_template does not have a template for mon status ring. But srng config template is necessary during ring initialization. So add a template for mon status ring. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-4-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: avoid call ath12k_dp_mon_parse_rx_dest_tlv() for WCN7850Kang Yang
WCN7850 doesn't have RX MON component. So it's monitor mode design is quite different from AP based chips like QCN9274, which have RX MON component. ath12k_dp_mon_parse_rx_dest_tlv() is such a specific function for AP based chips. So don't call this function for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-3-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: parse msdu_end tlv in ath12k_dp_mon_rx_parse_status_tlv()Kang Yang
Currently, error bitmap and decap format are parsed in ath12k_dp_mon_parse_rx_dest_tlv(). Then stored into dp_rx_mon_mpdu_list. ath12k_dp_mon_parse_rx_dest_tlv() and dp_rx_mon_mpdu_list are only used by QCN9274. For WCN7850, error bitmap and decap format are also needed. So need to parse MSDU END TLV in ath12k_dp_mon_rx_parse_status_tlv(), this is the common function for WCN7850 and QCN9274. Then store error bitmap and decap format so that QCN9274 can fetch them when processing MSDU payload. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-2-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Abort scan before removing link interface to prevent duplicate ↵Lingbo Kong
deletion Currently, when ath12k performs the remove link interface operation, if there is an ongoing scan operation on the arvif, ath12k may execute the remove link interface operation multiple times on the same arvif. This occurs because, during the remove link operation, if a scan operation is present on the arvif, ath12k may receive a WMI_SCAN_EVENT_COMPLETED event from the firmware. Upon receiving this event, ath12k will continue to execute the ath12k_scan_vdev_clean_work() function, performing the remove link interface operation on the same arvif again. To address this issue, before executing the remove link interface operation, ath12k needs to check if there is an ongoing scan operation on the current arvif. If such an operation exists, it should be aborted. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418064008.7172-1-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use WMI_VDEV_SET_TPC_POWER_CMDID when EXT_TPC_REG_SUPPORT for ↵Baochen Qiang
6 GHz When station is connected to a 6 GHz AP, there are 2 ways to configure the power limit to firmware. The first way is to send 2 WMI commands WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which includes more parameters for power control. When firmware advertises WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, it supports WMI_VDEV_SET_TPC_POWER_CMDID, ath12k uses it to send more parameters to firmware. As chanctx is needed to extract necessary info for this command, save it beforehand in ath12k_mac_op_assign_vif_chanctx(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-15-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add handler for WMI_VDEV_SET_TPC_POWER_CMDIDBaochen Qiang
Add the handler for WMI_VDEV_SET_TPC_POWER_CMDID, it is for 6 GHz band. A subsequent patch will call this handler to send power parameters to firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-14-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: fill parameters for vdev set TPC power WMI commandBaochen Qiang
Prepare the parameters which are needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. This helper will be used in a following patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-13-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: save max transmit power in vdev start response event from firmwareBaochen Qiang
Save the max transmit power received in the vdev start response event from firmware. A subsequent patch will use this to calculate the final power Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-12-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add parse of transmit power envelope elementBaochen Qiang
The Transmit Power Envelope element conveys the local maximum transmit power for various transmission bandwidths, this element is present in various frames, e.g. beacon and probe response etc, transmitted by AP. A station shall determine a local maximum transmit power from it. So parse and save them for later use. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-11-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: save power spectral density(PSD) of regulatory ruleBaochen Qiang
Currently the power spectral density (PSD) report from firmware is ignored. Since it is needed by cfg80211, report it in struct ieee80211_reg_rule such that cfg80211 can use it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-10-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: update regulatory rules when connection establishedBaochen Qiang
Once connection to AP established we know the exact power type, it is time to update regulatory rules based on such info. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-9-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: update regulatory rules when interface addedBaochen Qiang
There are two power types for 6 GHz regulatory, one is AP, another is client. The client power type is used for station interface, and AP power type is used for AP/mesh point interface. When firmware boots up, WMI_REG_CHAN_LIST_CC_EXT_EVENTID is sent from firmware at an early stage, the interface mode is not decided at this point, then ath12k select reg rules of AP type as default. After interface created, ath12k needs to update reg rules to the exact power type matching the interface type. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-8-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: determine interface mode in _op_add_interface()Baochen Qiang
Currently interface mode is determined each time a vdev is created. In MLO scenario where there could be multiple vdevs this is just a waste of time. Move related logic into a new helper ath12k_mac_determine_vdev_type() and call it once in ath12k_mac_op_add_interface(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-7-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: store reg info for later useBaochen Qiang
Currently we only build regdomain when channel list event is received. That event is received when driver boots or when a new country code is sent to firmware. At either time we may have no information about interface mode or AP's power type, consequently WMI_REG_INDOOR_AP is selected. In upcoming patches we will rebuild regdomain once those information is available. For that purpose reg info has to be stored/refreshed each time a new channel list event is received. The stored reg info would be freed in ath12k_reg_free() when it is not needed. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-6-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: move reg info handling outsideBaochen Qiang
The reg info is allocated in ath12k_reg_chan_list_event() but validated in ath12k_reg_handle_chan_list(). Currently this is good since reg info would be freed regardless of validation results. However in an upcoming patch the reg info might need to be stored for later use if the result is good. Since we can not tell the result from return value of ath12k_reg_handle_chan_list(), we need to move validation out of it. Add a new helper ath12k_reg_validate_reg_info() and call it in ath12k_reg_chan_list_event(), based on the result we can choose to store or free it in the following patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-5-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add support to select 6 GHz regulatory typeBaochen Qiang
For 6 GHz band, firmware offers 3 types of regulatory rules for AP mode and 6 for station mode in WMI_REG_CHAN_LIST_CC_EXT_EVENTID event. In ath12k_reg_build_regd() current code by default chooses WMI_REG_INDOOR_AP type rules from AP mode reg list to build regdomain, regardless of the interface mode and power type, hence is not correct. Pass interface mode (wmi_vdev_type) and AP power type (ieee80211_ap_reg_power) as new arguments to ath12k_reg_build_regd() such that we can choose correct rules based on them. Currently ath12k_reg_build_regd() is called only by ath12k_reg_chan_list_event() when driver boots, at that time these two arguments are not determined yet, hence by default pass WMI_VDEV_TYPE_UNSPEC and IEEE80211_REG_UNSET_AP, this results in WMI_REG_INDOOR_AP being chosen at last. In upcoming patches the rules would be updated when these two arguments could be determined. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-4-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: refactor ath12k_reg_build_regd()Baochen Qiang
Currently we pass intersect flag to tell ath12k_reg_build_regd() whether regulatory rulse are intersected. This flag is determined in ath12k_reg_handle_chan_list() and has no other users. Move related logic into ath12k_reg_build_regd() to make code clear. Also relocate ath12k_reg_is_world_alpha() to avoid forward declaration, and refine it for code simplicity. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-3-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: refactor ath12k_reg_chan_list_event()Baochen Qiang
ath12k_reg_chan_list_event() is doing quite some work: allocate/free reg_info, parse chan list event and store required info in reg_info, process reg_info, build regd and queue work item for later processing etc, which makes it hard to read. Refactor this function: 1. extract reg_info processing and regd building into a new helper ath12k_reg_handle_chan_list(). 2. extract reg_info free into a new helper ath12k_reg_reset_reg_info(). Note the refactor also benefit some upcoming patches where these helpers are getting called. Also relocate these two helpers and the existing ath12k_reg_is_world_alpha() to reg.c to reflect what they are doing. And update fw to firmware while relocating. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-2-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: fix a possible dead lock caused by ab->base_lockBaochen Qiang
spin_lock/spin_unlock are used in ath12k_reg_chan_list_event to acquire/release ab->base_lock. For now this is safe because that function is only called in soft IRQ context. But ath12k_reg_chan_list_event() will be called from process context in an upcoming patch, and this can result in a deadlock if ab->base_lock is acquired in process context and then soft IRQ occurs on the same CPU and tries to acquire that lock. Fix it by using spin_lock_bh and spin_unlock_bh instead. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-1-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: delete mon reap timerKang Yang
Currently mon reap timer is not used, and it is not needed anymore for WCN7850. So remove related code. This change does not affect QCN9274, as the mon reap timer is not used for QCN9274. Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250416022011.1935-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Add support to simulate firmware crashDinesh Karthikeyan
Add debugfs support to simulate firmware crash to test firmware restart. Usage: ----- echo assert > /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/simulate_fw_crash Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250417065237.2507613-1-maharaja.kennadyrajan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath11k: support DBS and DFS compatibilityYu Zhang(Yuriy)
Now some chips which support 'support_dual_stations' will enable DBS, but will disable DFS. Restructure the ath11k_mac_setup_iface_combinations function to support DBS and DFS compatibility. About 'support_dual_station' feature can refer: https://msgid.link/20230714023801.2621802-2-quic_cjhuang@quicinc.com Add a ieee80211_iface_combination to support DBS and DFS compatibility, one combination can support DFS(same with non dual sta), another combination can support DBS. When running different scenarios that will use different ieee80211_iface_combination due to mac80211 will go through all of possible interface combinations. In addition, maximum number of interfaces of these types should be total allowed in this group. The chips affected are: QCA6390 hw2.0 WCN6855 hw2.0 WCN6855 hw2.1 Other chips are not affected. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-00410-QCAHKSWPL_SILICONZ-2 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04402-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Tested-by: Mihai Moldovan <ionic@ionic.de> Link: https://patch.msgid.link/20241127022742.4016870-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath11k: fix rx completion meta data corruptionJohan Hovold
Add the missing memory barrier to make sure that the REO dest ring descriptor is read after the head pointer to avoid using stale data on weakly ordered architectures like aarch64. This may fix the ring-buffer corruption worked around by commit f9fff67d2d7c ("wifi: ath11k: Fix SKB corruption in REO destination ring") by silently discarding data, and may possibly also address user reported errors like: ath11k_pci 0006:01:00.0: msdu_done bit in attention is not set Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218005 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Clayton Craft <clayton@craftyguy.net> Link: https://patch.msgid.link/20250321145302.4775-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath11k: fix ring-buffer corruptionJohan Hovold
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing@quicinc.com> Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Tested-by: Clayton Craft <clayton@craftyguy.net> Link: https://patch.msgid.link/20250321094916.19098-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath11k: Fix QMI memory reuse logicMuhammad Usama Anjum
Firmware requests 2 segments at first. The first segment is of 6799360 whose allocation fails due to dma remapping not available. The success is returned to firmware. Then firmware asks for 22 smaller segments instead of 2 big ones. Those get allocated successfully. At suspend/ hibernation time, these segments aren't freed as they will be reused by firmware after resuming. After resuming, the firmware asks for the 2 segments again with the first segment of 6799360 size. Since chunk->vaddr is not NULL, the type and size are compared with the previous type and size to know if it can be reused or not. Unfortunately, it is detected that it cannot be reused and this first smaller segment is freed. Then we continue to allocate 6799360 size memory which fails and ath11k_qmi_free_target_mem_chunk() is called which frees the second smaller segment as well. Later success is returned to firmware which asks for 22 smaller segments again. But as we had freed 2 segments already, we'll allocate the first 2 new smaller segments again and reuse the remaining 20. Hence 20 small segments are being reused instead of 22. Add skip logic when vaddr is set, but size/type don't match. Use the same skip and success logic as used when dma_alloc_coherent() fails. By skipping, the possibility of resume failure due to kernel failing to allocate memory for QMI can be avoided. kernel: ath11k_pci 0000:03:00.0: failed to allocate dma memory for qmi (524288 B type 1) ath11k_pci 0000:03:00.0: failed to allocate qmi target memory: -22 Tested-on: WCN6855 WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6 Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250428080242.466901-1-usama.anjum@collabora.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath9k: ahb: do ioremap resource in one stepRosen Penev
Simplifies probe slightly and adds extra error codes. Switching from devm_ioremap to the platform variant ends up calling devm_request_mem_region, which reserves the memory region for the various wmacs. Per board, there is only one wmac and after some fairly thorough analysis, there are no overlapping memory regions between wmacs and other devices on the ahb. Tested on a TP-Link Archer C7v2. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250421040044.44887-1-rosenp@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath10k: Constify structures in hw.cChristophe JAILLET
Structures defined in hw.c are not modified in this driver. Constifying these structures moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 10357 951 0 11308 2c2c drivers/net/wireless/ath/ath10k/hw.o After: ===== text data bss dec hex filename 11125 203 0 11328 2c40 drivers/net/wireless/ath/ath10k/hw.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/504b4d5276d13f5f9c3bffcfdaf244006312c22b.1745051315.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath10k: Fix spelling mistake "comple" -> "complete"Colin Ian King
There is a spelling mistake in a ath10k_warn message. Fix it and remove space before colon to tidy up message. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20250418115627.534833-1-colin.i.king@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Use scan link ID 15 for all scan operationsAditya Kumar Singh
According to the code documentation in ath12k_mac_op_hw_scan(), "if no links of an ML VIF are already active on the radio corresponding to the given scan frequency, the scan link (link ID 15) should be used". This rule should apply to non-ML interfaces as well to maintain uniformity across the driver. However, currently, link 0 is selected as the scan link during non-ML operations. Update the code to use scan link ID 15 in all cases. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250417-fix_scan_vdev_handling-v3-2-9ec42513d26b@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: handle scan link during vdev createAditya Kumar Singh
For scanning purposes, the driver can use link ID 15 (scan link). A future change will make non-ML interfaces to select the scan link. In this scenario, arvif->link_id will be used to retrieve the link configuration in ath12k_mac_vdev_create(). However, link ID 15 is not recognized as a valid link ID in the upper kernel, which will result in a failure to fetch link_conf and subsequently cause the scan to fail. To avoid this issue, ensure link_conf is fetched only when the link ID is within the valid range. Since link_conf cannot be retrieved using the scan link, use vif->addr as the Ethernet address for creating the scan vdev. This address will serve as the source address (address 2) in the probe request frames during scanning. Additionally, use the automatic Tx power value for the vdev. As this is a scan vdev, these values do not affect the scan functionality. Note that vif->addr will only be taken when a valid link_conf can not be fetched. Otherwise, link_conf's address will be taken as address 2. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250417-fix_scan_vdev_handling-v3-1-9ec42513d26b@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: read country code from SMBIOS for WCN7850Wen Gong
Read the country code from SMBIOS and send it to the firmware. The firmware will then indicate the regulatory domain information for the country code, which ath12k will use. dmesg: [ 1242.637253] ath12k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS [ 1242.637259] ath12k_pci 0000:02:00.0: bdf variant name not found. [ 1242.637261] ath12k_pci 0000:02:00.0: SMBIOS bdf variant name not set. [ 1242.927543] ath12k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-02582-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250417024227.1712-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-15 17:51:23 +0000