summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2020-07-15broadcom: fix wiki website urlFlavio Suligoi
In some b43 files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605154112.16277-6-f.suligoi@asem.it
2020-07-14brcm80211: brcmsmac: Move LEDs to GPIO descriptorsLinus Walleij
The code in the BRCM80211 BRCMSMAC driver is using the legacy GPIO API to to a complex check of the validity of the base of the GPIO chip and whether it is present at all and then adding an offset to the base of the chip. Use the existing function to obtain a GPIO line internally from a GPIO chip so we can use the offset directly and modernize the code to use GPIO descriptors instead of integers from the global GPIO numberspace. Cc: Wright Feng <wright.feng@cypress.com> Cc: Frank Kao <frank.kao@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711210150.4943-1-linus.walleij@linaro.org
2020-07-14brcmfmac: Transform compatible string for FW loadingMatthias Brugger
The driver relies on the compatible string from DT to determine which FW configuration file it should load. The DTS spec allows for '/' as part of the compatible string. We change this to '-' so that we will still be able to load the config file, even when the compatible has a '/'. This fixes explicitly the firmware loading for "solidrun,cubox-i/q". Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans deGoede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200701112201.6449-1-matthias.bgg@kernel.org
2020-07-14brcmfmac: set pacing shift before transmitting skb to busWright Feng
Linux 3.6 introduces TSQ which has a per socket threshold for TCP Tx packet to reduce latency. In flow control mode, host driver enqueues skb in hanger and TCP doesn't push new skb frees until host frees the skb when receiving fwstatus event. So set pacing shift 8 to send them as a single large aggregate frame to the bus layer. 43455 TX TCP throughput in different FC modes on Linux 5.4.18 sk_pacing_shift : Throughput (fcmode=0) 10: 245 Mbps 9: 245 Mbps 8: 246 Mbps 7: 246 Mbps sk_pacing_shift : Throughput (fcmode=1) 10: 182 Mbps 9: 197 Mbps 8: 206 Mbps 7: 207 Mbps sk_pacing_shift : Throughput (fcmode=2) 10: 180 Mbps 9: 197 Mbps 8: 206 Mbps 7: 207 Mbps Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624091608.25154-3-wright.feng@cypress.com
2020-07-14brcmfmac: set state of hanger slot to FREE when flushing PSQWright Feng
When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com
2020-07-14brcmfmac: reset SDIO bus on a firmware crashChi-Hsien Lin
commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") adds a reset function to recover firmware trap for PCIe bus. This commit adds an implementation for SDIO bus. Upon SDIO firmware trap, do below: - Remove the device - Reset hardware - Probe the device again Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622144851.165248-1-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: do not disconnect for disassoc frame from unconnected APAble Liao
Ignore FW event if the event's BSSID is different form the BSSID of the currently connected AP. Check interface state is connected or not, if state is not connected that can ignore link down event. Signed-off-by: Able Liao <Able.Liao@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200618160739.21457-4-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: Fix for wrong disconnection event source informationSoontak Lee
Current brcmf_link_down() always call cfg80211_disconnected() with locally_generated=1, which is not always the case. Add event source argument on link down handler and set locally_generated based on the real trigger. Signed-off-by: Soontak Lee <soontak.lee@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200618160739.21457-3-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: Fix for unable to return to visible SSIDSoontak Lee
Unable to change back to visiable SSID because there is no disable hidden ssid routine. Signed-off-by: Soontak Lee <soontak.lee@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200618160739.21457-2-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: initialize the requested dwell timeJoseph Chuang
Commit 4905432b28b7 ("brcmfmac: Fix P2P Group Formation failure via Go-neg method") did not initialize requested_dwell properly, resulting in an always-false dwell time overflow check. Fix it by setting the correct requested_dwell value. Fixes: 4905432b28b7 ("brcmfmac: Fix P2P Group Formation failure via Go-neg method") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joseph Chuang <joseph.chuang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-7-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: fix throughput zero stalls on PM 1 mode due to credit mapDouble Lo
This patch move the credit map setting to right place to avoid brcmf_fws_return_credits() return without setting the credit map. It fix the thoughput zero stalls issue in softAP mode when STA using PM 1 mode. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-6-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: update tx status flags to sync with firmwareChung-Hsien Hsu
There is a mismatch of tx status flag values between host and firmware. It makes the host mistake the flags and have incorrect behavior of credit returns. So update the flags to sync with the firmware ones. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-5-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: reserve 2 credits for host tx control pathAmar Shankar
It is observed that sometimes when sdiod is low in tx credits in low rssi scenarios, the data path consumes all sdiod rx all credits and there is no sdiod rx credit available for control path causing host and card to go out of sync resulting in link loss between host and card. So in order to prevent it some credits are reserved for control path. Note that TXCTL_CREDITS can't be larger than the firmware default credit update threshold 2; otherwise there will be a deadlock for both side waiting for each other. Signed-off-by: Amar Shankar <amsr@cypress.com> Signed-off-by: Jia-Shyr Chuang <joseph.chuang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-4-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: increase message buffer size for control packetsJia-Shyr Chuang
In wifi firmware, max length of IOCTL/IOVAR buffer size is 8192. Increase the message buffer max size same as wifi firmware for control packets so return buffers can come back. Signed-off-by: Soontak Lee <soontak.lee@cypress.com> Signed-off-by: Jia-Shyr Chuang <joseph.chuang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-3-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: allow credit borrowing for all access categoriesRaveendran Somu
Current credit borrowing allows only the access category BE to borrow the credits. This change is to fix the credit borrowing logic, to make borrowing available for all access categories and also to borrow only from the lower categories. This fixes WFA 802.11n certs 5.2.27 failures. Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Jia-Shyr Chuang <joseph.chuang@cypress.com> Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200610152106.175257-2-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: To fix Bss Info flag definition BugPrasanna Kerekoppa
Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com
2020-07-14brcmfmac: reduce maximum station interface from 2 to 1 in RSDB modeWright Feng
The firmware state machines are not fully suitable for concurrent station interface support, it may hit unexpected error if we have 2 different SSIDs and the roaming scenarios concurrently. To avoid the bad user-experience if this is not fully validated, we dis-allow user to create two concurrent station interfaces. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-5-wright.feng@cypress.com
2020-07-14brcmfmac: keep SDIO watchdog running when console_interval is non-zeroWright Feng
brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-4-wright.feng@cypress.com
2020-07-14brcmfmac: fix invalid permanent MAC address in wiphyWright Feng
When host driver retrieves mac addresses from dongle, driver copies memory from drvr->mac to perm_addr. But at the moment, drvr->mac is all zero array which causes permanent MAC address in wiphy is all zero as well. To fix this, we set drvr->mac before setting perm_addr. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-3-wright.feng@cypress.com
2020-07-14brcmfmac: To fix kernel crash on out of boundary accessRaveendran Somu
To truncate the additional bytes, if extra bytes have been received. Current code only have a warning and proceed without handling it. But in one of the crash reported by DVT, these causes the crash intermittently. So the processing is limit to the skb->len. Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-2-wright.feng@cypress.com
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-29brcmfmac: 43012 Update MES WatermarkDouble Lo
Set MES watermark size to 0x50 for 43012. It fixes SDIO bus hang issue when running at high throughput. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-6-chi-hsien.lin@cypress.com
2020-05-29brcmfmac: fix 43455 CRC error under SDIO 3.0 SDR104 modeWright Feng
This patch fixes 43455 CRC error while running throughput test with suspend/resume stress test. The continuous failure messages before system crash: brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-5-chi-hsien.lin@cypress.com
2020-05-29brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIOFrank Kao
Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO. Also enable and configure F1 MesBusyCtrl. It would resolve random driver crash issue. Signed-off-by: Frank Kao <frank.kao@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-4-chi-hsien.lin@cypress.com
2020-05-29brcmfmac: fix 4339 CRC error under SDIO 3.0 SDR104 modeDouble Lo
This patch fixes 4339 CRC error while running Tput test with suspend/resume test script. The continuous failure messages before system crash: brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-3-chi-hsien.lin@cypress.com
2020-05-29brcmfmac: set F2 blocksize for 4373Wright Feng
Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-2-chi-hsien.lin@cypress.com
2020-05-29b43_legacy: Fix connection problem with WPA3Larry Finger
Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
2020-05-29b43: Fix connection problem with WPA3Larry Finger
Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
2020-05-29mmc: sdio: Fix Cypress SDIO IDs macros in common include filePali Rohár
All macro names for SDIO device IDs are prefixed by vendor name to which device ID belongs. So for consistency add Broadcom string vendor prefix to all Cypress macro names as they belong to SDIO Broadcom vendor ID. Change also Cypress 43012 value from decimal do hexadecimal notation to be consistent with all other values. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-11-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from b43-sdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-10-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13brcmfmac: fix WPA/WPA2-PSK 4-way handshake offload and SAE offload failuresChung-Hsien Hsu
An incorrect value of use_fwsup is set for 4-way handshake offload for WPA//WPA2-PSK, caused by commit 3b1e0a7bdfee ("brcmfmac: add support for SAE authentication offload"). It results in missing bit BRCMF_VIF_STATUS_EAP_SUCCESS set in brcmf_is_linkup() and causes the failure. This patch correct the value for the case. Also setting bit BRCMF_VIF_STATUS_EAP_SUCCESS for SAE offload case in brcmf_is_linkup() to fix SAE offload failure. Fixes: 3b1e0a7bdfee ("brcmfmac: add support for SAE authentication offload") Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1589277788-119966-1-git-send-email-chi-hsien.lin@cypress.com
2020-05-12brcmfmac: remove Comparison to bool in brcmf_p2p_send_action_frame()Jason Yan
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1785:5-8: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200508074351.19193-1-yanaijie@huawei.com
2020-05-12brcmfmac: make non-global functions staticChen Zhou
Fix sparse warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:2206:5: warning: symbol 'brcmf_p2p_get_conn_idx' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Reviewed-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200508013249.95196-1-chenzhou10@huawei.com
2020-05-12brcmfmac: Use seq/seq_len and set iv_initialize when plumbing of rxiv in ↵Soontak Lee
(GTK) keys When plumbing rxiv for (GTK) keys, current code does not use seq/seq_len when present nor set iv_initialized for iovar wsec_key. This could result in missing broadcast traffic after GTK rekey. The fix is setting iv_initialized and using seq/seq_len for iovar wsec_key. Signed-off-by: Soontak Lee <soontak.lee@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588770201-54361-4-git-send-email-wright.feng@cypress.com
2020-05-12brcmfmac: use actframe_abort to cancel ongoing action frameRyohei Kondo
The driver sends an action frame down and waits for dwell time to be completed or aborted before sending out the next action frame. Driver issues "scan abort" to cancel the current time slot, but this doesn't have any effect because, we are not using scan engine for sending action frame. Fix is to use "actframe_abort" to cancels the current action frame. Signed-off-by: Ryohei Kondo <ryohei.kondo@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588770201-54361-3-git-send-email-wright.feng@cypress.com
2020-05-12brcmfmac: set security after reiniting interfaceJia-Shyr Chuang
Host driver parses and sets security params into FW passed by supplicant. This has to be done after reiniting interface in the firmware. Signed-off-by: Jia-Shyr Chuang <joseph.chuang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588770201-54361-2-git-send-email-wright.feng@cypress.com
2020-05-12brcmfmac: fix 802.1d priority to ac mapping for pcie donglesPramod Prakash
802.1d defines 0,3 for BE and 1,2 for BK. In pcie dongles, 0 & 3 are mapped to 0 and 1,2 are mapped to 1. This change corrects this mapping, so that BE & BK are given access precedence accordingly by pcie dongles. Signed-off-by: Pramod Prakash <pramod.prakash@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588661487-21884-3-git-send-email-chi-hsien.lin@cypress.com
2020-05-12brcmfmac: map 802.1d priority to precedence level based on AP WMM paramsSaravanan Shanmugham
In WLAN, priority among various access categories of traffic is always set by the AP using WMM parameters and this may not always follow the standard 802.1d priority. In this change, priority is adjusted based on the AP WMM params received as part of the Assoc Response and the same is later used to map the priority of all incoming traffic. In a specific scenario where EDCA parameters are configured to be same for all ACs, use the default FW priority definition to avoid queuing packets of all ACs to the same priority queue. This change fixes the following 802.11 certification tests: * 11n - 5.2.31 ACM Bit Conformance test * 11n - 5.2.32 AC Parameter Modification test * 11ac - 5.2.33 TXOP Limit test Signed-off-by: Saravanan Shanmugham <saravanan.shanmugham@cypress.com> Signed-off-by: Justin Li <justin.li@cypress.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588661487-21884-2-git-send-email-chi-hsien.lin@cypress.com
2020-05-07Merge tag 'wireless-drivers-next-2020-05-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 First set of patches for v5.8. Changes all over, ath10k apparently seeing most new features this time. rtw88 also had lots of changes due to preparation for new hardware support. In this pull request there's also a new macro to include/linux/iopoll: read_poll_timeout_atomic(). This is needed by rtw88 for atomic polling. Major changes: ath11k * add debugfs file for testing ADDBA and DELBA * add 802.11 encapsulation offload on hardware support * add htt_peer_stats_reset debugfs file ath10k * enable VHT160 and VHT80+80 modes * enable radar detection in secondary segment * sdio: disable TX complete indication to improve throughput * sdio: decrease power consumption * sdio: add HTT TX bundle support to increase throughput * sdio: add rx bitrate reporting ath9k * improvements to AR9002 calibration logic carl9170 * remove buggy P2P_GO support p54usb * add support for AirVasT USB stick rtw88 * add support for antenna configuration ti wlcore * add support for AES_CMAC cipher iwlwifi * support for a few new FW API versions * new hw configs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07b43: remove dead function b43_rssinoise_postprocess()Jason Yan
This function is dead for more than 10 years. Remove it. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06b43: remove Comparison of 0/1 to bool variable in pio.cJason Yan
Fix the following coccicheck warning: drivers/net/wireless/broadcom/b43/pio.c:768:10-25: WARNING: Comparison of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504113311.41026-1-yanaijie@huawei.com
2020-05-06b43: remove Comparison of 0/1 to bool variable in phy_n.cJason Yan
Fix the following coccicheck warning: drivers/net/wireless/broadcom/b43/phy_n.c:5510:19-32: WARNING: Comparison of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504113300.40895-1-yanaijie@huawei.com
2020-05-06brcmsmac: remove Comparison to bool in brcms_b_txstatus()Jason Yan
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:1060:6-12: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504113357.41422-1-yanaijie@huawei.com
2020-05-06brcmfmac: Add P2P Action Frame retry delay to fix GAS Comeback Response ↵Justin Li
failure issue It was observed that P2P Cert. 5.1.19: DEVUT responds to Service Discovery request failed due to DUT did not send GAS Comeback Response after receiving request from test bed P2P peer. To fix this issue, we need to add P2P Action Frame retry delay to enhance P2P connection under VSDB and noisy environment, since the peer can be in other channels under VSDB. Signed-off-by: Justin Li <Justin.Li@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588572453-194663-4-git-send-email-wright.feng@cypress.com
2020-05-06brcmfmac: Fix P2P Group Formation failure via Go-neg methodJoseph Chuang
P2P group formation fails since either peer is not able to send go-neg confirm or dut is not able to send go-neg response. To fix this, retry limit should be increased and dwell time check should be added. Signed-off-by: Joseph Chuang <joseph.chuang@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588572453-194663-3-git-send-email-wright.feng@cypress.com
2020-05-06brcmfmac: support the second p2p connectionWright Feng
With RSDB feature, firmware is able to support two P2P-AGO or two P2P-GC at the same time. So we add the second p2p connection type to map to the second P2P connection bsscfg. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588572453-194663-2-git-send-email-wright.feng@cypress.com
2020-05-04brcmfmac: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. In doing this, make brcmf_debugfs_add_entry() return void as no one was even paying attention to the return value. Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafał Miłecki" <rafal@milecki.pl> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200429101526.GA2094124@kroah.com
2020-05-04brcmfmac: remove comparison to bool in brcmf_fws_attach()Jason Yan
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:2359:6-40: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426094053.23132-1-yanaijie@huawei.com
generated by cgit (git 2.34.1) at 2025-07-19 23:52:11 +0000