summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2025-01-14wifi: mt76: mt7925: add handler to hif suspend/resume eventQuan Zhou
When the system suspend or resume, the WiFi driver sends an hif_ctrl command to the firmware and waits for an event. Due to changes in the event format reported by the chip, the current mt7925's driver does not account for these changes, resulting in command timeout. Add flow to handle hif_ctrl event to avoid command timeout. We also exented API mt76_connac_mcu_set_hif_suspend for connac3 this time. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/3a0844ff5162142c4a9f3cf7104f75076ddd3b87.1735910562.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: fix CLC command timeout when suspend/resumeQuan Zhou
When enter suspend/resume while in a connected state, the upper layer will trigger disconnection before entering suspend, and at the same time, it will trigger regd_notifier() and update CLC, causing the CLC event to not be received due to suspend, resulting in a command timeout. Therefore, the update of CLC is postponed until resume, to ensure data consistency and avoid the occurrence of command timeout. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/bab00a2805d0533fd8beaa059222659858a9dcb5.1735910455.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: fix the unfinished command of regd_notifier before suspendQuan Zhou
Before entering suspend, we need to ensure that all MCU command are completed. In some cases, such as with regd_notifier, there is a chance that CLC commands, will be executed before suspend. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/3af7b4e5bf7437832b016e32743657d1d55b1f9d.1735910288.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: fix register mappingPeter Chiu
Bypass the entry when ofs is equal to dev->reg.map[i].size. Without this patch, it would get incorrect register mapping when the CR address is located at the boundary of an entry. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Link: https://patch.msgid.link/OSZPR01MB84344FEFF53004B5CF40BCC198132@OSZPR01MB8434.jpnprd01.prod.outlook.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: fix register mappingPeter Chiu
Bypass the entry when ofs is equal to dev->reg.map[i].size. Without this patch, it would get incorrect register mapping when the CR address is located at the boundary of an entry. Fixes: cd4c314a65d3 ("mt76: mt7915: refine register definition") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Link: https://patch.msgid.link/OSZPR01MB843401EAA1DA6BD7AEF356F298132@OSZPR01MB8434.jpnprd01.prod.outlook.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: fix monitor modeFelix Fietkau
Enable sniffer mode via MCU command in order to properly enable promiscuous mode on the device. Link: https://patch.msgid.link/20250102163508.52945-24-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: switch to single multi-radio wiphyFelix Fietkau
Use generic mt76 chanctx functions and look up phy from vif link. The driver now uses only a single phy to handle multiple interfaces on different channels. This is preparation for full MLO support. Link: https://patch.msgid.link/20250102163508.52945-23-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: move all debugfs files to the primary phyFelix Fietkau
Preparation for single-wiphy support Link: https://patch.msgid.link/20250102163508.52945-22-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: connac: rework connac helpersShayne Chen
Rework connac helpers related to rate and phymode. This is a preliminary patch to add MLO support for mt7996 chipsets. Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250102163508.52945-21-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: prepare mt7996_mcu_update_bss_color for MLO supportFelix Fietkau
Pass in struct mt76_vif_link in order to update the correct link. Link: https://patch.msgid.link/20250102163508.52945-20-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: connac: prepare mt76_connac_mcu_sta_basic_tlv for MLO supportFelix Fietkau
Pass in struct ieee80211_bss_conf in order to use link specific data. Link: https://patch.msgid.link/20250102163508.52945-19-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: prepare mt7996_mcu_set_timing for MLO supportFelix Fietkau
Pass in struct ieee80211_bss_conf in order to use link specific data. Link: https://patch.msgid.link/20250102163508.52945-18-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: prepare mt7996_mcu_set_tx for MLO supportFelix Fietkau
Pass in struct ieee80211_bss_conf in order to use link specific data. Link: https://patch.msgid.link/20250102163508.52945-17-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: prepare mt7996_mcu_add_beacon for MLO supportFelix Fietkau
Pass in struct ieee80211_bss_conf. Link: https://patch.msgid.link/20250102163508.52945-16-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO supportFelix Fietkau
Add extra arguments for struct ieee80211_bss_conf and mt76_vif_link. Link: https://patch.msgid.link/20250102163508.52945-15-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: pass wcid to mt7996_mcu_sta_hdr_trans_tlvFelix Fietkau
Preparation for MLO support. Link: https://patch.msgid.link/20250102163508.52945-14-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: use emulated hardware scan supportFelix Fietkau
Preparation for supporting multiple radios on a single wiphy Link: https://patch.msgid.link/20250102163508.52945-13-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio remain_on_channel functionsFelix Fietkau
This allows a driver using the generic channel context functions to temporarily switch to another channel for off-channel rx/tx. Link: https://patch.msgid.link/20250102163508.52945-12-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio support to scanning codeFelix Fietkau
When scanning on a phy/vif combination that does not have an active link, create a temporary link in order to ensure that we have a valid wcid. Link: https://patch.msgid.link/20250102163508.52945-11-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio support to tx schedulingFelix Fietkau
Look up the phy for each scheduled txq. Only run one scheduling loop per hw. Link: https://patch.msgid.link/20250102163508.52945-10-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio support to a few core hw opsFelix Fietkau
Iterate over all phys if multi-radio is supported by the driver Link: https://patch.msgid.link/20250102163508.52945-9-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: remove dev->wcid_phy_maskFelix Fietkau
Explicitly check wcid->phy_idx instead. Reduces allocated data size. Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add chanctx functions for multi-channel phy supportFelix Fietkau
This adds an implementation for the chanctx functions, which can be used by multi-channel capable drivers. Preparation for adding MLO support. Link: https://patch.msgid.link/20250102163508.52945-7-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: initialize more wcid fields mt76_wcid_initFelix Fietkau
Reduces code duplication and ensures that the phy index is always set. Link: https://patch.msgid.link/20250102163508.52945-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: split link specific data from struct mt7996_vifFelix Fietkau
Preparation for MLO support. Link: https://patch.msgid.link/20250102163508.52945-5-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add vif link specific data structureFelix Fietkau
Preparation for splitting link data from vif data for MLO support. Link: https://patch.msgid.link/20250102163508.52945-4-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: rename struct mt76_vif to mt76_vif_linkFelix Fietkau
Preparation to use it for private bss link data instead of the full vif on MLO capable devices. Link: https://patch.msgid.link/20250102163508.52945-3-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add support for allocating a phy without hwFelix Fietkau
Preparation for supporting a single hw with multiple radios Link: https://patch.msgid.link/20250102163508.52945-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add code for emulating hardware scanningFelix Fietkau
Preparation for supporting multiple radios on a single wiphy on devices where firmware does not support actual hardware scanning. This is also a prerequisite for full MLO support Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250102163508.52945-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: do not add wcid entries to sta poll list during MCU resetFelix Fietkau
Fixes linked list management issues during restart, where sta entries can be recreated and reinitialized while still in the poll list, triggering kernel warnings. Link: https://patch.msgid.link/20241230194202.95065-14-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: use mac80211 .sta_state opFelix Fietkau
Allows adding stations before assoc, though they are not passed to the firmware yet at that point. Link: https://patch.msgid.link/20241230194202.95065-13-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: fix omac index assignment after hardware resetFelix Fietkau
Reset per-phy mac address slot mask in order to avoid leaking entries. Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support") Link: https://patch.msgid.link/20241230194202.95065-12-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: firmware restart on devices with a second pcie linkFelix Fietkau
It seems that the firmware checks the register used for detecting matching PCIe links in order to figure out if a secondary PCIe link is enabled. Write the register again just before starting the firmware on hw reset, in order to fix an issue that left the second band unusable after restart. Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1") Link: https://patch.msgid.link/20241230194202.95065-11-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: hold dev->mutex while interacting with the thermal stateFelix Fietkau
Avoid issuing MCU calls during a hardware restart Link: https://patch.msgid.link/20241230194202.95065-10-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: ensure that only one sta entry is active per mac addressFelix Fietkau
When a client is roaming to a different AP interface, a duplicate wtbl entry can be created. This can lead to lost packets or aggregation issues until the old entry expires. In order to fix this issue, delete any conflicting entries from WTBL whenever a station is authorized. Link: https://patch.msgid.link/20241230194202.95065-9-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: only enable tx worker after setting the channelFelix Fietkau
Avoids sending packets too early Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Link: https://patch.msgid.link/20241230194202.95065-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: decrease timeout for commonly issued MCU commandsFelix Fietkau
This allows faster recovery from firmware issues Link: https://patch.msgid.link/20241230194202.95065-7-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: reduce the number of command retriesFelix Fietkau
The need to retry a command is really uncommon. Reduce the retries to 1 to speed up recovery from firmware issues. Link: https://patch.msgid.link/20241230194202.95065-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: fix rx filter setting for bfee functionalityFelix Fietkau
Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Link: https://patch.msgid.link/20241230194202.95065-5-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: fix eifs value on older chipsetsFelix Fietkau
Use the default firmware values Link: https://patch.msgid.link/20241230194202.95065-4-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7915: fix slot time for 5/6GHzFelix Fietkau
It should only be set to 20 for long slot time on 2.4 GHz Link: https://patch.msgid.link/20241230194202.95065-3-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7996: remove phy->monitor_vifFelix Fietkau
It is unused Link: https://patch.msgid.link/20241230194202.95065-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: remove mt76_calculate_default_rate()Felix Fietkau
It is only used in mt76_connac2_mac_tx_rate_val, inline it there. Link: https://patch.msgid.link/20241230194202.95065-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7921u: Add VID/PID for TP-Link TXE50UHNick Morrow
Add VID/PID 35bc/0107 for recently released TP-Link TXE50UH USB WiFi adapter. Tested-by: Shang Chieh Tseng <shangchieh.tseng@tsengsy.com> Signed-off-by: Nick Morrow <usbwifi2024@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/e797f105-9ca8-41e9-96de-7d25dec09943@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: replace zero-length array with flexible-array memberZhang Kunbo
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last, which is beneficial to cultivate a high-quality code.[2] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com> Link: https://patch.msgid.link/20241218074552.3271542-1-zhangkunbo@huawei.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7921: add rfkill_poll for hardware rfkillAllan Wang
Add mac80211 rfkill_poll ops to monitor hardware rfkill state and state change will be updated. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20241209070922.28106-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7921: introduce CSA supportLeon Yen
Add CSA (Channel Switch Announcement) related implementation in collaboration with mac80211 to deal with dynamic channel switching. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20241107061440.6545-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: config the dwell time by firmwareMichael Lo
To optimize the scan time of mt7925, remove the dwell time setting for the scan command and let it be controlled by the firmware as mt7921. Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20241106013221.18101-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: do not hold queue lock during initial rx buffer allocQuan Zhou
In dma init or reset scene, full buffer is needed for all rx rings. Since this is very time consuming, split the function to perform initial allocation without holding the spinlock. This avoids causing excessive scheduler latency. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Deren Wu <deren.wu@mediatek.com> Link: https://patch.msgid.link/57c68a7ce1dd9022fa5e06af2c53d6313f30ec83.1731069062.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: Properly handle responses for commands with eventsMing Yen Hsieh
Properly retrieve the response for commands with events. Ensure accurate handling of event-driven commands. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/20241211011926.5002-17-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-07-16 10:40:25 +0000