summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/quantenna
AgeCommit message (Collapse)Author
2019-04-04qtnfmac: allow changing the netnsSergey Matyukevich
Allow to change netns for wireless interfaces created by qtnfmac driver. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: simplify firmware state trackingSergey Matyukevich
This patch streamlines firmware state tracking. In particular, state QTNF_FW_STATE_FW_DNLD_DONE is removed, states QTNF_FW_STATE_RESET and QTNF_FW_STATE_DETACHED are merged into a single state. Besides, new state QTNF_FW_STATE_RUNNING is introduced to distinguish between the following two cases: - firmware load succeeded, firmware init process is ongoing - firmware init succeeded, firmware is fully functional Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: fix core attach error path in pcie backendSergey Matyukevich
Report that firmware is up and running only for successful firmware download. Simplify qtnf_pcie_fw_boot_done: modify error path so that no need to pass firmware dowload result to this function. Finally, do not create debugfs entries if firmware download succeeded, but core attach failed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: update bands information on CHANGE_INTF commandIgor Mitsyanko
In some regions, different regulatory limits (like max Tx power) may be defined for different operating modes. As an example: in ETSI regions DFS master devices may use higher transmit powers compared to DFS slave devices. Update bands information in CHANGE_INTF command if mode of operation changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: pass DFS region to firmware on region updateIgor Mitsyanko
Pass DFS region as requested by regulatory core directly to firmware so it can initialize radar detection block accordingly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: allow each MAC to specify its own regulatory rulesIgor Mitsyanko
Currently driver uses the same regulatory rules to register all wiphy instances. This is not logically correct since each wiphy may have different capabilities (different supported bands, EIRP etc). Allow firmware to pass regulatory rules for each MAC separately. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: flexible regulatory domain registration logicIgor Mitsyanko
Use REGULATORY_CUSTOM_REG flag only if firmware advertised a custom regulatory domain prior to wiphy registration. Use REGULATORY_STRICT_REG flag only if firmware knows its regulatory domain. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: pass complete channel info in regulatory notifierIgor Mitsyanko
Currently only a portion of per-channel information is passed to firmware. Extend logic to pass all useful per-channel data. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: include full channels info to regulatory notifierIgor Mitsyanko
Before regulatory notifier is invoked by a wireless core, it will update band information for the wiphy. Pass this information to firmware together with new region alpha2 code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: simplify error reporting in regulatory notifierIgor Mitsyanko
Error reporting in qtnf_cfg80211_reg_notifier only requires to print one type of message and an error code. Firmware will report success for an attempt to set regulatory region to the same value, so no special handling is required for this case. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-04qtnfmac: make regulatory notifier work on per-phy basisIgor Mitsyanko
Wireless core calls regulatory notifier for each wiphy and it only guarantees that bands info is updated for this particular wiphy prior to calling a notifier. Hence updating all wiphy which belong to driver in a single notifier callback is redundant and incorrect. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08qtnfmac: enable WPA3 SAE supportSergey Matyukevich
In the case of SAE AP, drivers offload authentication to user-space software, e.g. hostapd. For FullMAC drivers the procedure is as follows. If auth_type is SAE and user space indicates external authentication capability, then driver requests authentication offload to user-space software using cfg80211_external_auth_request call. From that point, auth frame exchange is performed transparently for driver: user-space software sends/receives mgmt frames using mgmt_tx/mgmt_frame_register cfg80211 callbacks. As soon as authenitcation is completed, user-space software notifies driver about its status using external_auth cfg80211 callback. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08qtnfmac: enable WPA3 OWE supportSergey Matyukevich
In the case of OWE, STA should be able to pass DH IEs from AP assoc responses to wpa_s for processing. For this purpose DH IEs are received from firmware in BSS_JOIN events and passed to wireless core and then to wpa_s as additional optional rsp_ies parameter for cfg80211_connect_result. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Igor Mitsyanko <imitsyanko@quantenna.com> Cc: Avinash Patil <avinashp@quantenna.com> Cc: Sergey Matyukevich <smatyukevich@quantenna.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: qtnf_cmd_send_with_reply cleanupSergey Matyukevich
Use existing variable with dereferenced cmd_id field. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: remove unused declarationsSergey Matyukevich
Remove declarations for inexistent functions from bus.h header. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: add missing bss record to host scan cacheSergey Matyukevich
Make sure that valid BSS entry exists in wireless core record even in the case of successful connect reported by firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: convert to SPDX license identifiersSergey Matyukevich
Replace textual license with SPDX-License-Identifier. Add an SPDX-License-Identifier for the Makefile. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: do not reject retry changes in driverSergey Matyukevich
Do not reject RETRY changes in driver. This decision should belong to firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: switch to 32bit values for RTS/FRAG thresholdsSergey Matyukevich
Host wireless stack uses u32 type for RTS/FRAG threshold values. Switch to u32 in driver: pass u32 values to firmware and let firmware properly adapt these values according to its internal representation. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: add support for 4addr modeSergey Matyukevich
Advertise WIPHY_FLAG_4ADDR_STATION capability to wireless core. Send use4addr interface change flag to firmware in change_virtual_intf cfg80211 callback. In order to enable adding wireless station interface to bridge one should turn on 4addr mode using the following command: $ iw dev wlan0 set 4addr on $ brctl addif br0 wlan0 If this commands succeeds, then interface can be added to bridge. Note that when wireless interface is added to bridge, wpa_supplicant should be started with appropriate -b <brname> parameter, e.g: $ wpa_supplicant -Dnl80211 -iwlan0 -c/path/to/wpa.conf -b br0 Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: fix INTx interrupt handlingSergey Matyukevich
In the current implementation INTx interrupt is deasserted after the control path processing. However this may lead to missed interrupts from the wireless card. For instance, this may happen as a result of control path activity, when another interrupt arrives before INTx is deasserted. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: support EBUSY errcode for QLINK protocolAndrey Shevchenko
Add support of EBUSY error code for remote procedures over QLINK protocol. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01qtnfmac: use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06qtnfmac: fix error handling in control pathSergey Matyukevich
This patch fixes the following warnings: - smatch drivers/net/wireless/quantenna/qtnfmac/commands.c:132 qtnf_cmd_send_with_reply() warn: variable dereferenced before check 'resp' (see line 117) drivers/net/wireless/quantenna/qtnfmac/commands.c:716 qtnf_cmd_get_sta_info() error: uninitialized symbol 'var_resp_len'. drivers/net/wireless/quantenna/qtnfmac/commands.c:1668 qtnf_cmd_get_mac_info() error: uninitialized symbol 'var_data_len'. drivers/net/wireless/quantenna/qtnfmac/commands.c:1697 qtnf_cmd_get_hw_info() error: uninitialized symbol 'info_len'. drivers/net/wireless/quantenna/qtnfmac/commands.c:1753 qtnf_cmd_band_info_get() error: uninitialized symbol 'info_len'. drivers/net/wireless/quantenna/qtnfmac/commands.c:1782 qtnf_cmd_send_get_phy_params() error: uninitialized symbol 'response_size'. drivers/net/wireless/quantenna/qtnfmac/commands.c:2438 qtnf_cmd_get_chan_stats() error: uninitialized symbol 'var_data_len'. - gcc-8.2.1 drivers/net/wireless/quantenna/qtnfmac/commands.c: In function 'qtnf_cmd_send_with_reply': drivers/net/wireless/quantenna/qtnfmac/commands.c:133:54: error: 'resp' may be used uninitialized in this function [-Werror=maybe-uninitialized] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06qtnfmac: add support for Topaz chipsetsSergey Matyukevich
This patch adds support for QSR1000/QSR2000 family of chipsets to qtnfmac_pcie platform driver. QSR1000/QSR2000 (aka Topaz) is a family of 80MHz, 11ac Wave2, 4x4/2x4/2x2 chips, including single and dual band devices. Depending on specific chip model and firmware in use, either STA or both STA and AP modes are supported. Patch adds Topaz support to qtnfmac_pcie driver. Proper platform bus will be selected on probing based on chip ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06qtnfmac_pcie: use single PCIe driver for all platformsIgor Mitsyanko
Single PCIe driver can identify hardware type by reading CHIP ID at probe time and invoking a correct initialization sequence. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac_pcie: cleanup Pearl platform headersSergey Matyukevich
Remove redundant information from Pearl platform headers. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac: use SPDX identifier for pcie bus layer filesSergey Matyukevich
Change pcie bus layer licensing information to SPDX format. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac: use 'help' in KconfigSergey Matyukevich
Fix checkpatch warning: use preferred 'help' option in Kconfig. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: implement dump_station support for STA modeSergey Matyukevich
Current implementation of dump_station cfg80211 callback supports AP mode only. Add support for STA mode as well: by default in STA mode this callback is supposed to return AP on managed interface. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: drop redundant data copy in control pathSergey Matyukevich
Command responses and events from the firmware are copied twice in control path: at first in shm core (qtnf_shm_handle_new_data) and then in pcie bus drivers (qtnf_pcie_control_rx_callback). There is no need to copy this data twice, it can be done only once in rx callbacks. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: add support for scan dwell time configurationSergey Matyukevich
Firmware supports scan dwell time tuning for various types of scans. Enable support for this feature: - advertise capability to configure channel dwell time to host - pass scan dwell parameters to wireless card in scan request Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: add support for scan flushSergey Matyukevich
Notify firmware to flush cache before scanning when needed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: drop error reports for out-of-bounds key indexesSergey Matyukevich
On disconnect wireless core attempts to remove all the supported keys. Following cfg80211_ops conventions, firmware returns -ENOENT code for the out-of-bound key indexes. This is a normal behavior, so no need to report errors for this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: inform wireless core about supported extended capabilitiesSergey Matyukevich
Driver retrieves information about supported extended capabilities from wireless card. However this information is not propagated further to Linux wireless core. Fix this by setting extended capabilities fields of wiphy structure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: pass sgi rate info flag to wireless coreSergey Matyukevich
SGI should be passed to wireless core as a part of rate structure. Otherwise wireless core performs incorrect rate calculation when SGI is enabled in hardware but not reported to host. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not cancel scan in disconnect callbackIgor Mitsyanko
Do not cancel scan in disconnect callback. If there is an active scan, it will be cancelled by firmware, then host driver will be properly notified by event. Cancelling scan in disconnect callback occasionally may lead to the following race issue. Host is able to queue one scan after scan abort in disconnect callback, and another scan after scan abort in event handler. As a result, firmware receives second scan before the first scan completes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: cleanup and unify command error handlingSergey Matyukevich
Unify command error handling using qtnf_cmd_resp_result_decode function. Do not duplicate error messages in command handlers and cfg80211 callbacks: report 'cmd exec fail' only on control path internal failure. Remove redundant 'unlikely' macros. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not initialize per-MAC data multiple timesIgor Mitsyanko
Several members of pwr-MAC structure are re-initialized several times together with per-VIF initialization. Fix that and simplify the code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: request userspace to do OBSS scanning if FW can notIgor Mitsyanko
In case firmware reports that it can not do OBSS scanning for 40MHz 2.4GHz channels itself, tell userpsace to do that instead by setting NL80211_FEATURE_NEED_OBSS_SCAN flag. Signed-off-by: Igor mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: generate local disconnect event in disconnect callbackIgor Mitsyanko
When cfg80211 disconnect callback is triggered and command is processed by firmware, disconnect event with local parameter set must be sent immediately. Indicating that it's a "local" event (not from AP) will help upper layers to process this event correctly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not track STA states in driverSergey Matyukevich
Remove STA connection states tracking from driver. Leave it wireless core on host and to firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: check for correct CHIP ID at pcie probeIgor Mitsyanko
Make sure that wifi device is of supported variant by checking it's CHIP ID before completing a probe sequence. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: wait for FW load work to finish at PCIe removeIgor Mitsyanko
Waiting for "completion" to be set in FW load thread can not be used in case PCIe remove is called before FW load work was scheduled. Just wait for work completion instead to avoid problems. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: extract platform-independent PCIe codeIgor Mitsyanko
Extract platform-independent PCIe driver code into a separate file, and use it from platform-specific modules. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: add missing header includes to bus.hIgor Mitsyanko
A few include directives were missing in bus.h resulting in dependency of include order in other modules. Add missing includes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: rename platform-specific functionsIgor Mitsyanko
Rename several functions to indicate that they are platform specific. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: separate platform-independent PCIe structureIgor Mitsyanko
Move platform-independent PCIe data structure to a separate header file so it can be reused by different devices. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: pearl: rename spinlock tx0_lock to tx_lockIgor Mitsyanko
tx_lock name will later be reused when common pcie code is extracted to separate files. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-16 00:30:54 +0000