summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek
AgeCommit message (Collapse)Author
2025-03-13wifi: rtw89: coex: Add parser for Bluetooth channel map report version 7Ching-Te Ku
In order to rearrange the structure member, the format update to version 7. And to parse the report correctly, add the related logic. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250308025832.10400-4-pkshih@realtek.com
2025-03-13wifi: rtw89: coex: Fix coexistence report not show as expectedChing-Te Ku
This report will feedback some basic information from firmware(PTA counter, report counter, mailbox counter etc). And the report version need to match driver & firmware both side. The original logic break the switch case logic before driver update the report version. It made the report can not be parsed correctly. Delete the break at the version 7 and 8. Add logic to count C2H event report. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250308025832.10400-3-pkshih@realtek.com
2025-03-13wifi: rtw89: coex: RTL8852BT coexistence Wi-Fi firmware support for 0.29.122.0Ching-Te Ku
Add format version of Wi-Fi firmware commands/events for firmware version 0.29.122.0. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250308025832.10400-2-pkshih@realtek.com
2025-03-13wifi: rtw89: set force HE TB mode when connecting to 11ax APDian-Syuan Yang
Some of 11ax AP set the UL HE-SIG-A2 reserved subfield to all 0s, which will cause the 11be chip to recognize trigger frame as EHT. We propose a method to bypass the "UL HE-SIG-A2 reserved subfield" and always uses HE TB in response to the AP's trigger frame. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-6-pkshih@realtek.com
2025-03-13wifi: rtw89: 8922a: enable dynamic antenna gainKuan-Chung Chen
The 8922A now supports dynamic antenna gain. However, in firmware before v0.35.64.0, different transmit powers cannot be applied to each RF path. To comply with regulatory limits in these older firmware, the lower of the two requested transmit powers will be used for both paths when they differ. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-5-pkshih@realtek.com
2025-03-13wifi: rtw89: enable dynamic antenna gain based on countryKuan-Chung Chen
The dynamic antenna gain (DAG) considers the country, meaning DAG can be activated only when countries and regulatory domains allow it. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-4-pkshih@realtek.com
2025-03-13wifi: rtw89: refine mechanism of TASKuan-Chung Chen
TAS state switching mechanism now incorporates the TX ratio as a decision parameter. The average power calculation has been improved by using a higher resolution conversion from dBm to linear. During scan or MCC operations, TAS state is forced to static SAR and suspend the average power calculation. Additionally, TAS window size depends on the regulatory domain and band to ensure compliance. TAS is enabled when permitted by the regulatory domain and is currently supported on the 8852CE. For debugging, add a flag to disable_dm that can stop TAS mechanism. Co-developed-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-3-pkshih@realtek.com
2025-03-13wifi: rtw89: add support for negative values of dBm to linear conversionKuan-Chung Chen
Enhanced the dBm to linear conversion function to accommodate negative dBm values and improved the precision from 1 dBm to 0.25 dBm. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-2-pkshih@realtek.com
2025-03-05wifi: rtw89: pci: correct ISR RDU bit for 8922AEPing-Ke Shih
The interrupt status (ISR) bits of RX desc unavailable (RDU) for 8922AE are B_BE_RDU_CH1_INT_V1 and B_BE_RDU_CH0_INT_V1. With wrong bits, if it happens, driver can't recognize the situation and prompt a message. Fix the definition accordingly. Fixes: aa70f76120ee ("wifi: rtw89: pci: generalize interrupt status bits of interrupt handlers") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250227131907.9864-1-pkshih@realtek.com
2025-03-05wifi: rtw89: fw: don't reject firmware in blacklist to prevent breaking usersPing-Ke Shih
Once update driver blacklist of firmware, users' firmware might be in the list, and then driver stops working. Since breaking users is not expected, report a significant message instead of stopping. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250227131228.8457-5-pkshih@realtek.com
2025-03-05wifi: rtw89: fw: correct debug message format in ↵Ping-Ke Shih
rtw89_build_txpwr_trk_tbl_from_elm() The format should be "%08x". Fix the mistakes. Fixes: d60e73e5dd70 ("wifi: rtw89: fw: load TX power track tables from fw_element") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250227131228.8457-4-pkshih@realtek.com
2025-03-05wifi: rtw89: fw: update role_maintain H2C command for roles operating on band 1Po-Hao Huang
Add new fields band and port ID to make chips operating on the band and port ID other than 0, so that multiple vif(s) can be working at the same time. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250227131228.8457-3-pkshih@realtek.com
2025-03-05wifi: rtw89: fw: use struct to fill role_maintain H2C commandPo-Hao Huang
The role_maintain H2C command is to align operating mode of WiFi role, such as STA or AP modes, between driver and firmware. Use a struct to fill fields of this H2C command. Don't change logic at all. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250227131228.8457-2-pkshih@realtek.com
2025-02-27wifi: rtw89: Parse channel from IE to correct invalid hardware reports ↵Chih-Kang Chang
during scanning For some packets, we could not get channel information from PPDU status. And this causes wrong frequencies being reported. Parse the channel information from IE if provided by AP to fix this. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250220064357.17962-1-pkshih@realtek.com
2025-02-27wifi: rtw89: add support for HW TKIP cryptoKuan-Chung Chen
For 8852BTE, 8852CE, and 8922AE, TKIP encryption and decryption will be handled by hardware. All other chips will retain their existing software-based encryption and decryption. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250220062344.15836-1-pkshih@realtek.com
2025-02-21wifi: rtw88: Extend rtw_debugfs_get_tx_pwr_tbl() for RTL8814AUBitterblue Smith
Make it print the TX power details for all RF paths, not just A and B, and for all the rates supported by the chip, not just 1SS and 2SS rates. Also skip the RF paths and rates not supported by the chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/ea65a978-a735-4c97-af82-d7fe26f95da1@gmail.com
2025-02-21wifi: rtw88: Extend rtw_debugfs_get_phy_info() for RTL8814AUBitterblue Smith
Print information about the 3rd and 4th RF paths and about the 3rd spatial stream. Also, fix a small bug: don't show the average SNR and EVM for the OFDM and HT/VHT rates when the rate is actually CCK 11M. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/7c8e94e2-e034-40f3-bdaf-b000018b5573@gmail.com
2025-02-21wifi: rtw88: Extend rtw_phy_config_swing_table() for RTL8814AUBitterblue Smith
Select the TX power tracking tables for RF paths C and D as well. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/e1e532c9-8733-4ec8-84fe-ced4af6c08da@gmail.com
2025-02-21wifi: rtw88: Fix rtw_rx_phy_stat() for RTL8814AUBitterblue Smith
Record statistics for the 3SS rates too. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/39e3c7cf-37ed-4c0e-af00-dcd9eab351f0@gmail.com
2025-02-21wifi: rtw88: Fix rtw_init_vht_cap() for RTL8814AUBitterblue Smith
Set the MCS maps and the highest rates according to the number of spatial streams the chip has. For RTL8814AU that is 3. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/e86aa009-b5bf-4b3a-8112-ea5e3cd49465@gmail.com
2025-02-21wifi: rtw88: Fix rtw_init_ht_cap() for RTL8814AUBitterblue Smith
Set the RX mask and the highest RX rate according to the number of spatial streams the chip can receive. For RTL8814AU that is 3. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/4e786f50-ed1c-4387-8b28-e6ff00e35e81@gmail.com
2025-02-21wifi: rtw88: Fix rtw_desc_to_mcsrate() to handle MCS16-31Bitterblue Smith
This function translates the rate number reported by the hardware into something mac80211 can understand. It was ignoring the 3SS and 4SS HT rates. Translate them too. Also set *nss to 0 for the HT rates, just to make sure it's initialised. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d0a5a86b-4869-47f6-a5a7-01c0f987cc7f@gmail.com
2025-02-21wifi: rtw88: Fix rtw_mac_power_switch() for RTL8814AUBitterblue Smith
rtw_mac_power_switch() checks bit 8 of REG_SYS_STATUS1 to see if the chip is powered on. This bit appears to be always on in the RTL8814AU, so ignore it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/2f0fcffb-3067-4d95-a68c-f2f3a5a47921@gmail.com
2025-02-21wifi: rtw89: fw: safely cast mfw_hdr pointer from firmware->dataPing-Ke Shih
Check size of struct mfw_hdr within firmware->size before type casting to ensure to validly dereference fields from mfm_hdr pointer. Then, check if signature field is equal to RTW89_MFW_SIG to assert current is multi-firmware. Addresses-Coverity-ID: 1494046 ("Untrusted loop bound") Addresses-Coverity-ID: 1544385 ("Untrusted array index read") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-6-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: add debug message for unexpected secure firmwarePing-Ke Shih
If failed to load a non-secure firmware with a secure chip, it only throws a unclear message: rtw89_8922ae 0000:03:00.0: parse fw header fail To address this case simpler, add a message to point out this. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-5-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: propagate error code from rtw89_h2c_tx()Ping-Ke Shih
The error code should be propagated to callers during downloading firmware header and body. Remove unnecessary assignment of -1. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-4-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: get sb_sel_ver via get_unaligned_le32()Ping-Ke Shih
The sb_sel_ver is selection version for secure boot recorded in firmware binary data, and its size is 4 and offset is 58 (not natural alignment). Use get_unaligned_le32() to get this value safely. Find this by reviewing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-3-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: add blacklist to avoid obsolete secure firmwarePing-Ke Shih
To ensure secure chip only runs expected secure firmware, stop using obsolete firmware in blacklist which weakness or flaw was found. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-2-pkshih@realtek.com
2025-02-21wifi: rtw89: add H2C command of TX time for WiFi 7 chipsPing-Ke Shih
BT-coexistence configure WiFi TX time to share time slots with Bluetooth devices. Since the format is different from WiFi 6 chips, add the new format accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217063053.38936-3-pkshih@realtek.com
2025-02-21wifi: rtw89: mac: define registers of agg_limit and txcnt_limit to share ↵Ping-Ke Shih
common flow The agg_limit and txcnt_limit are used by BT-coexistence to reduce WiFi TX time at once to share time with Bluetooth devices. Since these registers address are different from WiFi 6 and 7 chips, define them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
2025-02-21wifi: rtw89: 8922a: fix incorrect STA-ID in EHT MU PPDUKuan-Chung Chen
EHT MU PPDU contains user field of EHT-SIG field with STA-ID that must match AID subfield in the Associate Response. Add a necessary setting to prevent these from being inconsistent. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217061235.32031-1-pkshih@realtek.com
2025-02-21wifi: rtw89: rtw8852b{t}: fix TSSI debug timestampsDmitry Antipov
Since the vendor driver is claimed to measure 'tssi_alimk_time' of 'struct rtw89_tssi_info' in microseconds, adjust rtw8852b{t}-specific '_tssi_alimentk()' to not mess the former with nanoseconds and print both per-call and accumulated times. Compile tested only. Fixes: 7f18a70d7b4d ("wifi: rtw89: 8852b: rfk: add TSSI") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250213095006.1308810-1-dmantipov@yandex.ru
2025-02-21wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1Zenm Chen
Add two more USB IDs found in https://github.com/RinCat/RTL88x2BU-Linux-Driver to support Mercusys MA30N and D-Link DWA-T185 rev. A1. Signed-off-by: Zenm Chen <zenmchen@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250210073610.4174-1-zenmchen@gmail.com
2025-02-10wifi: rtw89: debugfs depends on CFG80211's onePing-Ke Shih
The wiphy_locked_debugfs_read() and wiphy_locked_debugfs_write() used by rtw89 are defined if CFG80211_DEBUGFS enabled. Add the dependency accordingly. Fixes: 8fdf78f3cd5f ("wifi: rtw89: debugfs: use wiphy_locked_debugfs_{read,write}() if needed") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502101810.3CUpUL7p-lkp@intel.com/ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250210123105.10466-1-pkshih@realtek.com
2025-02-10wifi: rtlwifi: rtl8192de: Fix typos of debug message of phy settingAndrew Kreimer
There are some typos in comments/messages: - althougth -> although - asume -> assume Fix them via codespell. Signed-off-by: Andrew Kreimer <algonell@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250206082457.9148-1-algonell@gmail.com
2025-02-10wifi: rtw88: Fix rtw_update_sta_info() for RTL8814AUBitterblue Smith
This function tells the firmware what rates it can use. Put the 3SS and 4SS HT rates supported by the other station into the rate mask. Remove the 3SS and 4SS rates from the rate mask if the hardware only has 2 spatial streams. And finally, select the right rate ID (a parameter for the firmware) when the hardware has 3 spatial streams. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/48d1d90f-2aeb-4ec5-9a24-0980e10eae1e@gmail.com
2025-02-10wifi: rtw88: Extend TX power stuff for 3-4 spatial streamsBitterblue Smith
Although the RTL8814AU only has 3 spatial streams, maybe some other chip has 4. Correct the TX power index and TX power limit calculations for 3SS and 4SS HT/VHT rates. With this the RTL8814AU can set the TX power correctly. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d0c0e126-0794-4c4e-9203-ea39a707b673@gmail.com
2025-02-10wifi: rtw88: Rename RTW_RATE_SECTION_MAX to RTW_RATE_SECTION_NUMBitterblue Smith
It fits the meaning of the enum better. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/5a1c5a46-8ebb-43b0-9ab1-b78e2a22b3d2@gmail.com
2025-02-10wifi: rtw88: Constify some more structs and arraysBitterblue Smith
These structs and arrays are never modified, so make them const: rtw_band_2ghz rtw_band_5ghz rtw_pci_tx_queue_idx_addr rtw_pci_ops rtw_cck_rates rtw_ofdm_rates rtw_ht_1s_rates rtw_ht_2s_rates rtw_vht_1s_rates rtw_vht_2s_rates rtw_rate_section rtw_rate_size rtw_sdio_ops rtw_usb_ops Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/502f124e-ccf3-4c09-80a4-1e5c5304822b@gmail.com
2025-02-10wifi: rtw88: Extend rtw_fw_send_ra_info() for RTL8814AUBitterblue Smith
The existing code is suitable for chips with up to 2 spatial streams. Inform the firmware about the rates it's allowed to use when transmitting 3 spatial streams. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/08e2f328-1aab-4e50-93ac-c1e5dd9541ac@gmail.com
2025-02-10wifi: rtw88: Extend rf_base_addr and rf_sipi_addr for RTL8814AUBitterblue Smith
These members of struct rtw_chip_info each have a size of 2. Increase their size to 4, which is the number of RF paths the RTL8814AU has. This is required to read and write the RF registers of the RTL8814AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/7a4d8209-b8af-4943-b5de-f53d6edf591a@gmail.com
2025-02-10wifi: rtw88: Extend struct rtw_pwr_track_tbl for RTL8814AUBitterblue Smith
Currently this struct has the members required for chips with 2 RF paths. Add more members to support chips with 4 RF paths, like the RTL8814AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/be5a73f4-a0fe-43d6-9457-930cde199284@gmail.com
2025-02-10wifi: rtw88: Fix download_firmware_validate() for RTL8814AUBitterblue Smith
After the firmware is uploaded, download_firmware_validate() checks some bits in REG_MCUFW_CTRL to see if everything went okay. The RTL8814AU power on sequence sets bits 13 and 12 to 2, which this function does not expect, so it thinks the firmware upload failed. Make download_firmware_validate() ignore bits 13 and 12. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/049d2887-22fc-47b7-9e59-62627cb525f8@gmail.com
2025-02-10wifi: rtw88: Fix __rtw_download_firmware() for RTL8814AUBitterblue Smith
Don't call ltecoex_read_reg() and ltecoex_reg_write() when the ltecoex_addr member of struct rtw_chip_info is NULL. The RTL8814AU doesn't have this feature. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/55b5641f-094e-4f94-9f79-ac053733f2cf@gmail.com
2025-02-10wifi: rtw88: Fix a typo of debug message in rtw8723d_iqk_check_tx_failed()Andrew Kreimer
There is a typo in debug messages: - afer -> after Fix it via codespell. Signed-off-by: Andrew Kreimer <algonell@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203180913.5435-1-algonell@gmail.com
2025-02-10wifi: rtw89: regd: avoid using BITMAP_FROM_U64() to assign function bitmapPing-Ke Shih
Since there are two function features for now, func_bitmap[] has single one element, which BITMAP_FROM_U64() generating two elements is exceeded. Change to assign function bitmap barely. With i386-allmodconfig (a 32 bit system), it throws >> include/linux/bitmap.h:736:33: warning: excess elements in array initializer 736 | ((unsigned long) ((u64)(n) >> 32)) | ^ drivers/net/wireless/realtek/rtw89/regd.c:16:34: note: in expansion of macro 'BITMAP_FROM_U64' 16 | .func_bitmap = { BITMAP_FROM_U64(_fmap), }, \ | ^~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/regd.c:20:9: note: in expansion of macro 'COUNTRY_REGD' 20 | COUNTRY_REGD("00", RTW89_WW, RTW89_WW, RTW89_WW, 0x0); | ^~~~~~~~~~~~ Fixes: 79a36fc56bea ("wifi: rtw89: regd: handle supported regulatory functions by country") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502031932.BMQ4lhJT-lkp@intel.com/ Cc: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205014051.13765-1-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: Update Wi-Fi/Bluetooth coexistence version to 7.0.3Ching-Te Ku
Refine the TWS Bluetooth related coexistence mechanism. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-4-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: To avoid TWS serials A2DP lag, adjust slot arrangementChing-Te Ku
The TWS(True wireless stereo) serials Bluetooth audio device need to keep packet traffic not only with DUT, it also need to synchronize packet with its assistant earbud. And all the BR/EDR Bluetooth device need to do page scan to keep re-connect event sensitively between different DUT. These behavior will make TWS Bluetooth device cost more time slot to keep the good audio performance. This patch decrease half of Wi-Fi slot(from 40ms to 20ms) in a single cycle. Make the slot more flexible to prevent audio lag. The single cycle will be shorter, then it will bring some slot protection cost make Wi-Fi throughput decrease about 5%. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-3-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: Assign value over than 0 to avoid firmware timer hangChing-Te Ku
If the slot duration is 0, the firmware timer will trigger timer hang at the timer initializing state in a low rate due to hardware algorithm. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
2025-02-10wifi: rtw89: fw: validate multi-firmware header before getting its sizePing-Ke Shih
To access firmware elements appended after multi-firmware, add its size as offset to get start address of firmware elements. +-----+-------+------+---------+--------------+ -- | sig | fw_nr | rsvd | version | reserved | \ +---------------------------------------------+ | fw 0 | cv | type | mp | rsvd | shift | size | rsvd | | +---------------------------------------------+ | fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | +---------------------------------------------+ | fw N-1 | ... | | +=============================================+ | mfw size | fw 0 content | | +=============================================+ | | fw 1 content | | +=============================================+ | | ... | | +=============================================+ | | fw N -1 content | | +=============================================+ --/ | fw element TLV X | +=============================================+ | fw element TLV Y | +=============================================+ | fw element TLV Z | +=============================================+ To avoid Coverity warning when getting mfw size, validate it header ahead. Addresses-Coverity-ID: 1544385 ("Untrusted array index read") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203072911.47313-5-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-07-15 05:12:48 +0000