summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2025-05-10wifi: rtw89: debug: add FW log component for MLOPo-Hao Huang
This allows showing MLO related logs when FW debug mode is on. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-10-pkshih@realtek.com
2025-05-10wifi: rtw89: debug: add MLD table dumpPo-Hao Huang
Add definition for MLD table dump, this is for debug purpose only. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-9-pkshih@realtek.com
2025-05-10wifi: rtw89: debug: extend dbgfs for MLOPo-Hao Huang
Extend dbgfs vif/sta info to show current designated link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-8-pkshih@realtek.com
2025-05-10wifi: rtw89: add MLO track for MLSR switch decisionPo-Hao Huang
Add MLSR switch mechanism based on tracking RSSI. Switch to a 2 GHz link (if any) when average RSSI is lower than threshold -53. And, switch out from a 2 GHz link when average RSSI is larger than threshold -38. The sequence of MLSR switch handling is like the following. 1. initialize target link and configure to PS mode 2. configure current designated link to PS mode 3. configure target link to non-PS mode 4. deinitialize currently active links except target link The above flow also implies that target link becomes new designated link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-7-pkshih@realtek.com
2025-05-10wifi: rtw89: add handling of mlo_link_cfg H2C command and C2H eventZong-Zhe Yang
The mlo_link_cfg H2C command is used to tell FW to enter/leave PS mode on a given link. And, need to wait for status of C2H event to ensure if FW deals with it successfully. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-6-pkshih@realtek.com
2025-05-10wifi: rtw89: chan: re-calculate MLO DBCC mode during setting channelZong-Zhe Yang
Wi-Fi 7 chips have dual HW bands. After impending MLO support, they can work with HW-[0] / HW-[1] / HW-[0,1] according to active links. So, during setting channel, also re-calculate the MLO DBCC mode flag. Then, leaf chip functions of setting channel can configure with HWs based on current case. Besides, tweak the initial and idle MLO DBCC mode of Wi-Fi 7 chips to MLO_1_PLUS_1_1RF to work with dual HW bands. And, after disconnecting, due to no active links, MLO DBCC mode will re-calculate to idle case, i.e. MLO_1_PLUS_1_1RF. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-5-pkshih@realtek.com
2025-05-10wifi: rtw89: send nullfunc based on the given linkPo-Hao Huang
The nullfunc sender function is link specific. Use core_tx_write_link with sw_mld flag to TX the nullfunc via the given link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-4-pkshih@realtek.com
2025-05-10wifi: rtw89: allow driver to do specific band TX for MLOPo-Hao Huang
For data packets that can be sent on any band, fill in main mac_id and let HW decide. For packets that we wish to transmit on specific band, fill in sw_mld field so HW would only send it on that band. Main mac_id is the corresponding mac_id on band 0. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-3-pkshih@realtek.com
2025-05-10wifi: rtw89: extract link part from core tx write functionZong-Zhe Yang
Extract core_tx_write_link from core_tx_write to accept given links as parameters. To make the follow-up changes of TX description more clear, tweak SW functions to split things ahead. (don't change logic at all) Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250505072440.45113-2-pkshih@realtek.com
2025-05-10wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DMYuuki NAGAO
Add VID/PID 0411/03d1 for recently released BUFFALO WI-U2-866DM USB WiFi adapter. Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250503003227.6673-1-wf.yn386@gmail.com
2025-05-10wifi: rtw88: Handle RTL8723D(S) with blank efuseBitterblue Smith
Some users have RTL8723DS chips with nearly blank efuse. Currently these chips cannot connect when using rtw88, but they do work using the old out-of-tree driver. Use reasonable default values for TX power, antenna configuration, and crystal cap if the chip's efuse is missing these things. RTL8723D can use the same default values as RTL8703B, so simply move the code from rtl8703b_read_efuse() to the shared function __rtl8723x_read_efuse(). Link: https://github.com/lwfinger/rtw88/issues/157 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/5734afe7-0870-40b2-acd4-5657a02d7c56@gmail.com
2025-05-10wifi: rtw88: Fix RX aggregation settings for RTL8723DSBitterblue Smith
Use the same RX aggregation size and timeout used by the out-of-tree RTL8723DS driver. Also set mystery bit 31 of REG_RXDMA_AGG_PG_TH. This improves the RX speed from ~44 Mbps to ~67 Mbps. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/4c79fdc1-54bc-4986-9931-bb3ceb418b97@gmail.com
2025-05-09wifi: iwlwifi: remove unused high_temp from iwl_cfgJohannes Berg
This value is never read, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-16-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: move MAC parameters to MAC dataJohannes Berg
There are a number of MAC parameters that are in the iwl_cfg (which is the last config matched to the MAC/RF combination). This isn't necessary, there are many more of those than MACs, so move (most of) the data into the MAC family config struct. Note that DCCM information remains for use by older devices, and on 9000 series it'll be in struct iwl_cfg but be ignored when the CRF is in a Qu/So platform. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove DCCM offsets from new devicesJohannes Berg
This is only used with old-style debug dump, which isn't supported on newer devices, so remove the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove eeprom_size from new devicesJohannes Berg
Since 22000 series, the data is read by the firmware and the driver doesn't need to know, remove the useless setting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename struct iwl_base_paramsJohannes Berg
These are (going to be) base MAC parameters that are identical even for different platforms with the same MAC, so rename the structure accordingly, calling it iwl_family_base_params. Also rename the pointer to it so the dereferencing is a bit shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove rf_id fieldJohannes Berg
This field is always set for >= 9000 series, but then we already check that, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove dbgc_supported fieldJohannes Berg
This field is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename cfg_trans_params to mac_cfgJohannes Berg
Since 9000 series devices, the devices are split into MAC and CRF parts. Currently, "struct iwl_cfg" reflects some MAC and some RF parameters, but we want to clean this up and move the MAC data to what's now "struct iwl_cfg_trans_params". As the first step, to reflect the intent, rename this structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pass trans to iwl_parse_nvm_mcc_info()Johannes Berg
There's no need to pass various different pointers when the transport is already established, so just pass that instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-8-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove nvm_hw_section_num from new devicesJohannes Berg
This value hasn't been used since unified firmware in 22000 series, so there's no need to set the value for that or newer devices. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: handle cc firmware dynamicallyJohannes Berg
Instead of using fw_name_pre, handle the cc firmware file name specially in iwl_drv_get_fwname_pre() for the cc MAC type. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: build ax210 family FW names dynamicallyJohannes Berg
Add support for the TY MAC (discrete device) and GF4 RF to the list of MAC/RF types, and use that to remove fw_name_pre for the ax210 family devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove 'cdb' valueJohannes Berg
This is never used, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove QuZ/JF special casesJohannes Berg
Since JF RF always uses b0 step and QuZ MAC always uses a0 step for firmware, there's no need for these configs that just force the steps to those values. Remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: build 9000 series FW filenames dynamicallyJohannes Berg
This is more maintainable than the fw_name_pre prefix, and requires fewer duplicate structs as well. Since only b0 FW exists, override the MAC/RF steps for these devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: add JF1/JF2 RF for dynamic FW buildingJohannes Berg
This is needed, otherwise we don't know what to do and will not find the correct firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-16-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pcie: remove 0x2726 devicesJohannes Berg
These are test chips, not available to users, and not even listed in the PCI IDs table (so the driver won't bind them). There's no reason to list specific devices with them in the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: inline HT paramsJohannes Berg
With just a handful of values in two bytes, the params are smaller than the pointer to them. Inline them and save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove 6 GHz from ht40_bandsJohannes Berg
Since there's no HT on 6 GHz, only HE, the HT capabilities are never initialized, and so the ht40_bands value is never checked for the 6 GHz band. Remove the misleading value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: call thermal exit without wiphy lock heldBenjamin Berg
The driver must not hold the wiphy mutex when unregistering the thermal devices. Do not hold the lock for the call to iwl_mld_thermal_exit and only do a lock/unlock to cancel the ct_kill_exit_wk work. The problem is that iwl_mld_tzone_get_temp needs to take the wiphy lock while the thermal code is holding its own locks already. When unregistering the device, the reverse would happen as the driver was calling thermal_cooling_device_unregister with the wiphy mutex already held. It is not likely to trigger this deadlock as it can only happen if the thermal code is polling the temperature while the driver is being unloaded. However, lockdep reported it so fix it. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: avoid init-after-queueMiri Korenblit
rx_omi::finished_work is initialized when the containing link is. If the worker was queued and then an error happened, we will get to iwl_mld_init_link from the reconfig and initialize the work after it was queued. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: use a radio/system specific power budgetBenjamin Berg
Different hardware has a different maximum power consumption and the BIOS can also define a power limit for the device. Add code to select an appropriate maximum power budget for the device and configure that instead of using a hardcoded table. This removes the old table. It does not work with the variable upper limit and the there should be no consumer that requires these exact step values. This considerably increases the power budget for some devices and can prevent throttling in high traffic situations. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mvm: use a radio/system specific power budgetBenjamin Berg
Different hardware has a different maximum power consumption and the BIOS can also define a power limit for the device. Add code to select an appropriate maximum power budget for the device and configure that instead of using a hardcoded table. This removes the old table. It does not work with the variable upper limit and the there should be no consumer that requires these exact step values. This considerably increases the power budget for some devices and can prevent throttling in high traffic situations. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: fix thermal code compilation with -Werror=cast-qualBenjamin Berg
The compare_temps function in both mvm and mld dropped the const qualifier in a cast in a way that makes -Werror=cast-qual unhappy. Add the const to the cast to fix this. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-8-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: pcie: remove iwl_trans_pcie_gen2_send_hcmdMiri Korenblit
This function is not implemented nor called. Remove its declaration. Link: https://patch.msgid.link/20250506194102.3407967-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add support for a new version for link config commandYedidya Benshimol
Add support for a new version of link configuration command which includes NPCA and high priority TX traffic support for wifi8. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add a new version for mac config commandYedidya Benshimol
Add a new version of mac configuration command which includes UHR support indication. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: Add a new version for sta config commandYedidya Benshimol
Add a new version of sta configuration command which includes these wifi8 features: 1. LDPC X2 CW size support indication 2. Indication if ICF frame is needed instead of RTS 3. support for MIC padding delays for protected control frames Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: add range response version 10 supportAvraham Stern
Range response version 10 removes the rx and tx rates fields. These fields aren't used by the driver anyway, so no change is needed to support it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: mld: remove one more error in unallocated BAIDMiri Korenblit
Since the FW is the one to assign an ID to a BA, it can happen that the FW sends a bar_frame_release_notif before the driver had the chance to allocate the BAID. Convert the IWL_FW_CHECK into a regular debug print. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn()Salah Triki
Add usb_free_urb() in the error path to prevent memory leak. Signed-off-by: Salah Triki <salah.triki@gmail.com> Link: https://patch.msgid.link/aA3_maPlEJzO7wrL@pc [fix subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: brcmfmac: Fix structure size for WPA3 external SAETing-Ying Li
Add pmkid parameter in "brcmf_auth_req_status_le" structure to align the buffer size defined in firmware "wl_auth_req_status" structure. Signed-off-by: Ting-Ying Li <tingying.li@infineon.com> [arend: adapted path to apply to per-vendor variant] [arend: added kerneldoc for new struct field] Tested-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250425085519.492267-5-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: brcmfmac: cyw: support external SAE authentication in station modeArend van Spriel
Firmware has SME functionality but would like the userspace to handle SAE authentication. This patch adds support for such an external SAE authentication mechanism in station mode. Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> [arend: rework patch for per-vendor framework] Tested-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250425085519.492267-4-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: brcmfmac: make per-vendor event map constArend van Spriel
The event map is not intended to change so make it const. Tested-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250425085519.492267-3-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: brcmfmac: support per-vendor cfg80211 callbacks and firmware eventsArend van Spriel
Adding two vendor operations that can be used to provide per-vendor cfg80211 callbacks and per-vendor handlers for firmware events. These two are often related to handling interactions from user-space through nl80211. Exporting brcmf_fweh_register() for registering the per-vendor event handler callbacks. Some other exports for get event name string and allowing use of brcmf_dbg() in per-vendor module. Tested-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250425085519.492267-2-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc6). No conflicts. Adjacent changes: net/core/dev.c: 08e9f2d584c4 ("net: Lock netdevices during dev_shutdown") a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-07wifi: iwlwifi: handle v3 ratesJohannes Berg
For UHR, a version 3 of the rate API is being added, which increases the number of bits used for MCSes by shifting the NSS bit up. Handle that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.84cde65a603f.Ic3119ef77cbc6461abd2a6bda104c0d236adcc8d@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: mld: add RFI_CONFIG_CMD to iwl_mld_system_names arrayPagadala Yesu Anjaneyulu
Add RFI_CONFIG_CMD into the names array to facilitate the display of this command name when sending it to the firmware. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Link: https://patch.msgid.link/20250505215513.da89484cb838.I755709232f5e441ca159bdc5a151bac73d9744d3@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 08:53:17 +0000