| Age | Commit message (Collapse) | Author |
|---|
|
The lifetime of the fcloop_lsreq is not tight to the lifetime of the
host or target port, thus there is no need anymore to synchronize the
cleanup path anymore.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add the missing fcloop_call_host_done calls so that the caller
frees resources when something goes wrong.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that the tgtport is not going away as long portentry has a
pointer on it.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When nvmet_fc_unregister_targetport is called by the LLDD, it's not
possible to communicate with the host, thus all pending request will not
be process. Thus explicitly free them.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the target port is gone, the lsrsp pointer is invalid. Thus don't
call the done function anymore instead just drop the response.
This happens when the target sends a disconnect association. After this
the target starts tearing down all resources and doesn't expect any
response.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
fcloop depends on the host or the target to allocate the fcloop_lsreq
object. This means that the lifetime of the fcloop_lsreq is tied to
either the host or the target. Consequently, the host or the target must
cooperate during shutdown.
Unfortunately, this approach does not work well when the target forces a
shutdown, as there are dependencies that are difficult to resolve in a
clean way.
The simplest solution is to decouple the lifetime of the fcloop_lsreq
object by managing them directly within fcloop. Since this is not a
performance-critical path and only a small number of LS objects are used
during setup and cleanup, it does not significantly impact performance
to allocate them during normal operation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The delete callback can be called either via the unregister function or
from the transport directly. Thus it is necessary ensure resources are
not freed multiple times.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The abort handling logic expects that the state and the fcpreq are only
accessed when holding the reqlock lock.
While at it, only handle the aborts in the abort handler.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Track the lifetime of the in-flight tfcp_req to ensure
the object is not freed too early.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the newly introduced fcloop_lport_lookup instead
of the open coded version.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The checks for a valid input values are mixed with the logic to insert a
newly allocated nport. Refactor the function so that first the checks
are done.
This allows to untangle the setup steps into a more linear form which
reduces the complexity of the functions.
Also start tracking lport when a lport is assigned to a nport. This
ensures, that the lport is not going away as long it is still referenced
by a nport.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nport object has an association with the rport and lport object,
that means we can only remove an nport object from the global nport_list
after the last user of an rport or lport is gone.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A nport object is always used in association with targerport,
remoteport, tport and rport objects. Add explicit references for any of
the associated object. This ensures that nport is not removed too early
on shutdown sequences.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use SHASH_DESC_ON_STACK to avoid explicit allocation.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use SHASH_DESC_ON_STACK to avoid explicit allocation.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that a submission queue holds a reference to its completion queue,
there is no need to pass the cq argument to nvmet_req_init(), so remove
it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The NVMe PCI transport specification allows for completion queues to be
shared by different submission queues.
This patch allows a submission queue to keep track of the completion queue
it is using with reference counting. As such, it can be ensured that a
completion queue is not deleted while a submission queue is actively
using it.
This patch enables completion queue sharing in the pci-epf target driver.
For fabrics drivers, completion queue sharing is not enabled as it is
not possible as per the fabrics specification. However, this patch
modifies the fabrics drivers to correctly integrate the new API that
supports completion queue sharing.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With struct nvmet_cq now having a reference count, this patch amends the
target fabrics call chain to initialize and destroy/put a completion
queue.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For the PCI transport, the NVMe specification allows submission queues
to share completion queues, however, this is not supported in the
current NVMe target implementation. This is a preparatory patch to allow
for completion queue (CQ) sharing between different submission queues
(SQ).
To support queue sharing, reference counting completion queues is
required. This patch adds the refcount_t field ref to struct nvmet_cq
coupled with respective nvmet_cq_init(), nvmet_cq_get(), nvmet_cq_put(),
nvmet_cq_is_deletable() and nvmet_cq_destroy() functions.
A CQ reference count is initialized with nvmet_cq_init() when a CQ is
created. Using nvmet_cq_get(), a reference to a CQ is taken when an SQ is
created that uses the respective CQ. Similarly. when an SQ is destroyed,
the reference count to the respective CQ from the SQ being destroyed is
decremented with nvmet_cq_put(). The last reference to a CQ is dropped
on a CQ deletion using nvmet_cq_put(), which invokes nvmet_cq_destroy()
to fully cleanup after the CQ. The helper function nvmet_cq_in_use() is
used to determine if any SQs are still using the CQ pending deletion.
In which case, the CQ must not be deleted. This should protect scenarios
where a bad host may attempt to delete a CQ without first having deleted
SQ(s) using that CQ.
Additionally, this patch adds an array of struct nvmet_cq to the
nvmet_ctrl structure. This allows for the controller to keep track of CQs
as they are created and destroyed, similar to the current tracking done
for SQs. The memory for this array is freed when the controller is freed.
A struct nvmet_ctrl reference is also added to the nvmet_cq structure to
allow for CQs to be removed from the controller whilst keeping the new
API similar to the existing API for SQs.
Sample callchain with CQ refcounting for the PCI endpoint target
(pci-epf):
i. nvmet_execute_create_cq -> nvmet_pci_epf_create_cq
-> nvmet_cq_create -> nvmet_cq_init [cq refcount=1]
ii. nvmet_execute_create_sq -> nvmet_pci_epf_create_sq
-> nvmet_sq_create -> nvmet_sq_init -> nvmet_cq_get [cq refcount=2]
iii. nvmet_execute_delete_sq - > nvmet_pci_epf_delete_sq ->
-> nvmet_sq_destroy -> nvmet_cq_put [cq refcount 1]
iv. nvmet_execute_delete_cq -> nvmet_pci_epf_delete_cq
-> nvmet_cq_put [cq refcount 0]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds a new helper function nvmet_check_io_cqid(). It is to be
used when parsing host commands for IO CQ creation/deletion and IO SQ
creation to ensure that the specified IO completion queue identifier
(CQID) is not 0 (Admin queue ID). This is a check that already occurs in
the nvmet_execute_x() functions prior to nvmet_check_cqid.
With the addition of this helper function, the CQ ID checks in the
nvmet_execute_x() function can be removed, and instead simply call
nvmet_check_io_cqid() in place of nvmet_check_cqid().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Do not start authentication on I/O queues as it doesn't really add value,
and secure concatenation disallows it anyway. Authentication commands on
I/O queues are not aborted, so the host may still run the authentication
protocol on I/O queues.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When sending 'connect' the queues can figure out from the return code
whether authentication is required or not. But reauthentication doesn't
disconnect the queues, so this check is not available. Rather we need
to check whether the queue had been authenticated initially to figure
out if we need to reauthenticate.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The strncpy() function is deprecated for NUL-terminated strings as
explained in the "strncpy() on NUL-terminated strings" section of
Documentation/process/deprecated.rst.
The key issues are:
- strncpy() fails to guarantee NULL-termination when source > destination
- it unnecessarily zero-pads short strings, causing performance overhead
strscpy() is the proper replacement because:
- it guarantees NULL-termination
- it avoids redundant zero-padding
- it aligns with current kernel string-copying best practice
memcpy() was rejected because:
- NQN buffers (subsysnqn/hostnqn) are treated as NULL-terminated strings:
- strcmp() usage in nvmet_host_allowed() (discovery.c)
- strscpy() to copy subsysnqn in nvmet_execute_disc_identify()
seq_buf wasn't used because:
- this is a simple fixed-size buffer copy
- there is no need for progressive string construction features
Signed-off-by: Marcelo Moreira <marcelomoreira1905@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When handling an R2T PDU we short-circuit nvme_tcp_queue_request()
as we should not attempt to send consecutive PDUs. So open-code
nvme_tcp_queue_request() for R2T and drop the last argument.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When checking for secure concatenation we have already validated
that 'ctrl->opts' is set, so we can remove this check.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct nvme_loop_iod` is a flexible structure --a structure
that contains a flexible-array member.
Fix the following warning:
drivers/nvme/target/loop.c:36:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
|
|
This commit adds the NVME_QUIRK_NO_DEEPEST_PS quirk for device
[126f:2262], which belongs to device SOLIDIGM P44 Pro SSDPFKKW020X7
The device frequently have trouble exiting the deepest power state (5),
resulting in the entire disk being unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing the expected behavior.
Signed-off-by: Ilya Guterman <amfernusus@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The first namespace configured in a subsystem sets the subsystem's
atomic write size based on its AWUPF or NAWUPF. Subsequent namespaces
must have an atomic write size (per their AWUPF or NAWUPF) less than or
equal to the subsystem's atomic write size, or their probing will be
rejected.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
[hch: fold in review comments from John Garry]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
A change to QEMU resulted in all nvme controllers (single and
multi-controller subsystems) to have its CMIC.MCTRS bit set which
indicates the subsystem supports multiple controllers and it is possible
a namespace can be shared between those multiple controllers in a
multipath configuration.
When a namespace of a CMIC.MCTRS enabled subsystem is allocated, a
multipath node is created. The queue limits for this node are inherited
from the namespace being allocated. When inheriting queue limits, the
features being inherited need to be specified. The atomic write feature
(BLK_FEAT_ATOMIC_WRITES) was not specified so the atomic queue limits
were not inherited by the multipath disk node which resulted in the sysfs
atomic write attributes being zeroed. The fix is to include
BLK_FEAT_ATOMIC_WRITES in the list of features to be inherited.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The flag NVMET_PCI_EPF_Q_IS_SQ is set but never used. Remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Improve the debug message of nvmet_pci_epf_create_cq() to indicate if a
completion queue IRQ is disabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is no point in taking the controller irq_lock and calling
nvmet_pci_epf_should_raise_irq() for a completion queue which does not
have IRQ enabled (NVMET_PCI_EPF_Q_IRQ_ENABLED flag is not set).
Move the test for the NVMET_PCI_EPF_Q_IRQ_ENABLED flag out of
nvmet_pci_epf_should_raise_irq() to the top of nvmet_pci_epf_raise_irq()
to return early when no IRQ should be raised.
Also, use dev_err_ratelimited() to avoid a message storm under load when
raising IRQs is failing.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some endpoint PCIe controllers do not support raising legacy INTX
interrupts. This support is indicated by the intx_capable field of
struct pci_epc_features. Modify nvmet_pci_epf_raise_irq() to not
automatically fallback to trying raising an INTX interrupt after an MSI
or MSI-X error if the controller does not support INTX.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_pci_epf_delete_cq() unconditionally calls
nvmet_pci_epf_remove_irq_vector() even for completion queues that do not
have interrupts enabled. Furthermore, for completion queues that do
have IRQ enabled, deleting and re-creating the completion queue leaves
the flag NVMET_PCI_EPF_Q_IRQ_ENABLED set, even if the completion queue
is being re-created with IRQ disabled.
Fix these issues by calling nvmet_pci_epf_remove_irq_vector() only if
NVMET_PCI_EPF_Q_IRQ_ENABLED is set and make sure to always clear that
flag.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to lock this queue for that condition because the timeout work
executes per-namespace and can poll the poll CQ.
Reported-by: Hannes Reinecke <hare@kernel.org>
Closes: https://lore.kernel.org/all/20240902130728.1999-1-hare@kernel.org/
Fixes: a0fa9647a54e ("NVMe: add blk polling support")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/
Fixes: c372cdd1efdf ("nvme-pci: iod npages fits in s8")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression in this series for loop and read/write iterator
handling
- zone append block update tweak
- remove a broken IO priority test
- NVMe pull request via Christoph:
- unblock ctrl state transition for firmware update (Daniel
Wagner)
* tag 'block-6.15-20250509' of git://git.kernel.dk/linux:
block: remove test of incorrect io priority level
nvme: unblock ctrl state transition for firmware update
block: only update request sector if needed
loop: Add sanity check for read/write_iter
|
|
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The original nvme subsystem design didn't have a CONNECTING state; the
state machine allowed transitions from RESETTING to LIVE directly.
With the introduction of nvme fabrics the CONNECTING state was
introduce. Over time the nvme-pci started to use the CONNECTING state as
well.
Eventually, a bug fix for the nvme-fc started to depend that the only
valid transition to LIVE was from CONNECTING. Though this change didn't
update the firmware update handler which was still depending on
RESETTING to LIVE transition.
The simplest way to address it for the time being is to switch into
CONNECTING state before going to LIVE state.
Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
The plid array, head->plids, is meant to store placement IDs, each of
type u16. But its size has been incorrectly calculated, as the size of
the pointer is being used instead of the size of the object it points
to.
Use the sizeof(*head->plids) in kcalloc so that we don't allocate extra.
Fixes: 38e8397dde63 ("nvme: use fdp streams if write stream is provided")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
write_stream_granularity is set to max(info->runs, U32_MAX), which means
that any RUNS value less than 2 ** 32 becomes U32_MAX, and any larger
value is silently truncated to an unsigned int.
Use min() instead to provide the correct semantics, capping RUNS values
at U32_MAX.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 30b5f20bb2dd ("nvme: register fdp parameters with the block layer")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250506175413.1936110-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Maps a user requested write stream to an FDP placement ID if possible.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250506121732.8211-12-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Register the device data placement limits if supported. This is just
registering the limits with the block layer. Nothing beyond reporting
these attributes is happening in this patch.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250506121732.8211-11-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
That allows passing in structures instead of the u32 result, and thus
reduce the amount of bit shifting and masking required to parse the
result.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250506121732.8211-9-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For log pages that need to pass in a LSI value, while at the same time
not touching all the existing nvme_get_log callers.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250506121732.8211-8-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp (Michael
Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)
- ublk zero copy fix
- ublk selftest fix for UBLK_F_NEED_GET_DATA
* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
|
|
After calling nvme_auth_derive_tls_psk() we need to free the resulting
psk data, as either TLS is disable (and we don't need the data anyway)
or the psk data is copied into the resulting key (and can be free, too).
Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
