summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)Author
2020-06-01PCI: tegra: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code. Link: https://lore.kernel.org/r/20200521024709.2368-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-05-29PCI: vmd: Filter resource type bits from shadow registerJon Derrick
Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back. Example: pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit] Expected: pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit] If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices. Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-29PCI: tegra194: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Link: https://lore.kernel.org/r/20200521031355.7022-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2020-05-28PCI: hv: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct hv_dr_state { ... struct hv_pcidev_description func[]; }; struct pci_bus_relations { ... struct pci_function_description func[]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following forms: offsetof(struct hv_dr_state, func) + (sizeof(struct hv_pcidev_description) * (relations->device_count)) offsetof(struct pci_bus_relations, func) + (sizeof(struct pci_function_description) * (bus_rel->device_count)) with: struct_size(dr, func, relations->device_count) and struct_size(bus_rel, func, bus_rel->device_count) respectively. Link: https://lore.kernel.org/r/20200525164319.GA13596@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Wei Liu <wei.liu@kernel.org>
2020-05-27PCI: Add Loongson PCI Controller supportJiaxun Yang
This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_portKishon Vijay Abraham I
No functional change. Get "struct pcie_port *" from private data pointer of "struct irq_domain" in dw_pcie_irq_domain_free() to make it look similar to how "struct pcie_port *" is obtained in dw_pcie_irq_domain_alloc() Link: https://lore.kernel.org/r/20191220100550.777-1-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2020-05-22PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up linkMarc Zyngier
The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc). According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as: "Sets all internal timers to fast mode for simulation purposes." it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not. Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem. Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Marc Zyngier <maz@kernel.org> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org>
2020-05-22PCI: dwc: Fix inner MSI IRQ domain registrationMarc Zyngier
On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected: debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present! This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain. Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI". Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2020-05-22PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()Wei Yongjun
platform_get_resource() may fail and return NULL, so we had better check its return value to avoid a NULL pointer dereference a bit later in the code. Fix it to use devm_platform_ioremap_resource_byname() instead of calling platform_get_resource_byname() and devm_ioremap(). Link: https://lore.kernel.org/r/20200429015027.134485-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-22PCI: dwc: intel: Make intel_pcie_cpu_addr() staticJason Yan
Fix the following sparse warning: drivers/pci/controller/dwc/pcie-intel-gw.c:456:5: warning: symbol 'intel_pcie_cpu_addr' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415084953.6533-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-22PCI: dwc: Program outbound ATU upper limit registerAlan Mikhak
Function dw_pcie_prog_outbound_atu_unroll() does not program the upper 32-bit ATU limit register. Since ATU programming functions limit the size of the translated region to 4GB by using a u32 size parameter, these issues may combine into undefined behavior for resource sizes with non-zero upper 32-bits. For example, a 128GB address space starting at physical CPU address of 0x2000000000 with size of 0x2000000000 needs the following values programmed into the lower and upper 32-bit limit registers: 0x3fffffff in the upper 32-bit limit register 0xffffffff in the lower 32-bit limit register Currently, only the lower 32-bit limit register is programmed with a value of 0xffffffff but the upper 32-bit limit register is not being programmed. As a result, the upper 32-bit limit register remains at its default value after reset of 0x0. These issues may combine to produce undefined behavior since the ATU limit address may be lower than the ATU base address. Programming the upper ATU limit address register prevents such undefined behavior despite the region size getting truncated due to the 32-bit size limit. Link: https://lore.kernel.org/r/1585785493-23210-1-git-send-email-alan.mikhak@sifive.com Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2020-05-22PCI: rcar: Add endpoint mode supportLad Prabhakar
Add support for R-Car PCIe controller to work in endpoint mode. Link: https://lore.kernel.org/r/1588854799-13710-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-22PCI: endpoint: Add support to handle multiple base for mapping outbound memoryLad Prabhakar
R-Car PCIe controller has support to map multiple memory regions for mapping the outbound memory in local system also the controller limits single allocation for each region (that is, once a chunk is used from the region it cannot be used to allocate a new one). This features inspires to add support for handling multiple memory bases in endpoint framework. With this patch pci_epc_mem_init() initializes address space for endpoint controller which support single window and pci_epc_multi_mem_init() initializes multiple windows supported by endpoint controller. Link: https://lore.kernel.org/r/1588854799-13710-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DTKishon Vijay Abraham I
The PCI Bus Binding specification (IEEE Std 1275-1994 Revision 2.1 [1]) defines both Vendor ID and Device ID to be 32-bits. Fix pcie-cadence-host.c driver to read 32-bit Vendor ID and Device ID properties from device tree. [1] -> https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf Link: https://lore.kernel.org/r/20200508130646.23939-4-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Joseph <tjoseph@cadence.com>
2020-05-18PCI: cadence: Remove "cdns,max-outbound-regions" DT propertyKishon Vijay Abraham I
"cdns,max-outbound-regions" device tree property provides the maximum number of outbound regions supported by the Host PCIe controller. However the outbound regions are configured based on what is populated in the "ranges" DT property. Avoid using two properties for configuring outbound regions and use only "ranges" property instead. Link: https://lore.kernel.org/r/20200508130646.23939-3-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Joseph <tjoseph@cadence.com>
2020-05-18PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macrosPali Rohár
PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark. Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Add PHY supportMarek Behún
With recent proposed changes for U-Boot it is possible that bootloader won't initialize the PHY for this controller (currently the PHY is initialized regardless whether PCI is used in U-Boot, but with these proposed changes the PHY is initialized only on request). Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling PCIe PHY, and since Linux' functionality should be independent on what bootloader did, add code for enabling generic PHY if found in device OF node. The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM Trusted Firmware. The corresponding code in ARM Trusted Firmware skips one register write which U-Boot does not: step 7 ("Enable TX"), see [1]. Instead ARM Trusted Firmware expects PCIe driver to do this step, probably because the register is in PCIe controller address space, instead of PHY address space. We therefore add this step into the advk_pcie_setup_hw function. [1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836 Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
2020-05-18PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG accessPali Rohár
This register is applicable only when the controller is configured for Endpoint mode, which is not the case for the current version of this driver. Attempting to remove this code though caused some ath10k cards to stop working, so for some unknown reason it is needed here. This should be investigated and a comment explaining this should be put before the code, so we add a FIXME comment for now. Link: https://lore.kernel.org/r/20200430080625.26070-7-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Issue PERST via GPIOPali Rohár
Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Improve link trainingMarek Behún
Currently the aardvark driver trains link in PCIe gen2 mode. This may cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or even not detected. Moreover when ASPM code tries to retrain link second time, these cards may stop responding and link goes down. If gen1 is used this does not happen. Unconditionally forcing gen1 is not a good solution since it may have performance impact on gen2 cards. To overcome this, read 'max-link-speed' property (as defined in PCI device tree bindings) and use this as max gen mode. Then iteratively try link training at this mode or lower until successful. After successful link training choose final controller gen based on Negotiated Link Speed from Link Status register, which should match card speed. Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only ↵Pali Rohár
register Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense. In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register. Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory. Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect. Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly. Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.: https://bugzilla.kernel.org/show_bug.cgi?id=196339 If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards. Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Train link immediately after enabling trainingPali Rohár
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX). Move the code which enables link training immediately before the one which starts link traning. This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot. Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-13PCI: brcmstb: Wait for Raspberry Pi's firmware when presentNicolas Saenz Julienne
xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on RPi4's VideoCore firmware interface to be up and running. It's possible for both initializations to race, so make sure it's available prior to starting. Link: https://lore.kernel.org/r/20200505161318.26200-4-nsaenzjulienne@suse.de Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-05-12PCI: Check for platform_get_irq() failure consistentlyAman Sharma
The platform_get_irq*() interfaces return either a negative error number or a valid IRQ. 0 is not a valid return value, so check for "< 0" to detect failure as recommended by the function documentation. On failure, return the error number from platform_get_irq*() instead of making up a new one. Link: https://lore.kernel.org/r/cover.1583952275.git.amanharitsh123@gmail.com [bhelgaas: commit log, squash into one patch] Signed-off-by: Aman Sharma <amanharitsh123@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
2020-05-11PCI: hv: Retry PCI bus D0 entry on invalid device stateWei Hu
When kdump is triggered, some PCI devices may have not been shut down cleanly before the kdump kernel starts. This causes the initial attempt to enter D0 state in the kdump kernel to fail with invalid device state returned from Hyper-V host. When this happens, explicitly call hv_pci_bus_exit() and retry to enter the D0 state. Link: https://lore.kernel.org/r/20200507050300.10974-1-weh@microsoft.com Signed-off-by: Wei Hu <weh@microsoft.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-05-11PCI: hv: Fix the PCI HyperV probe failure path to release resource properlyWei Hu
In some error cases in hv_pci_probe(), allocated resources are not freed. Fix this by adding a field to keep track of the high water mark for slots that have resources allocated to them. In case of an error, this high water mark is used to know which slots have resources that must be released. Since slots are numbered starting with zero, a value of -1 indicates no slots have been allocated resources. There may be unused slots in the range between slot 0 and the high water mark slot, but these slots are already ignored by the existing code in the allocate and release loops with the call to get_pcichild_wslot(). Link: https://lore.kernel.org/r/20200507050211.10923-1-weh@microsoft.com Signed-off-by: Wei Hu <weh@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-05-11PCI: brcmstb: Disable L0s component of ASPM if requestedJim Quinlan
Some informal internal experiments has shown that the BrcmSTB ASPM L0s savings may introduce an undesirable noise signal on some customers' boards. In addition, L0s was found lacking in realized power savings, especially relative to the L1 ASPM component. This is BrcmSTB's experience and may not hold for others. At any rate, if the 'aspm-no-l0s' property is present L0s will be disabled. Link: https://lore.kernel.org/r/20200507201544.43432-5-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
2020-05-11PCI: brcmstb: Fix window register offset from 4 to 8Jim Quinlan
The outbound memory window registers were being referenced with an incorrect stride offset. This probably wasn't noticed previously as there was likely only one such window employed. Link: https://lore.kernel.org/r/20200507201544.43432-3-james.quinlan@broadcom.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
2020-05-11PCI: brcmstb: Don't clk_put() a managed clockJim Quinlan
clk_put() was being invoked on a clock obtained by devm_clk_get_optional(). Link: https://lore.kernel.org/r/20200507201544.43432-2-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
2020-05-11PCI: brcmstb: Assert fundamental reset on initializationNicolas Saenz Julienne
While preparing the driver for upstream this detail was missed. If not asserted during the initialization process, devices connected on the bus will not be made aware of the internal reset happening. This, potentially resulting in unexpected behavior. Link: https://lore.kernel.org/r/20200507172020.18000-1-nsaenzjulienne@suse.de Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2020-05-11PCI: endpoint: Pass page size as argument to pci_epc_mem_init()Lad Prabhakar
pci_epc_mem_init() internally used page size equal to *PAGE_SIZE* to manage the address space so instead just pass the page size as a argument to pci_epc_mem_init(). Also make pci_epc_mem_init() as a C function instead of a macro function in preparation for adding support for pci-epc-mem core to handle multiple windows. Link: https://lore.kernel.org/r/1588854799-13710-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-11PCI: rcar: Fix calculating mask for PCIEPAMR registerLad Prabhakar
The mask value was calculated incorrectly for PCIEPAMR register if the size was less than 128 bytes. Fix this issue by adding a check on size. Link: https://lore.kernel.org/r/1588854799-13710-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-11PCI: rcar: Move shareable code to a common fileLad Prabhakar
Move shareable code to common file pcie-rcar.c and the #defines to pcie-rcar.h so that the common code can be reused with endpoint driver. There are no functional changes with this patch for the host controller driver. Link: https://lore.kernel.org/r/1588854799-13710-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-11PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.cLad Prabhakar
This commit renames pcie-rcar.c to pcie-rcar-host.c in preparation for adding support for endpoint mode. CONFIG_PCIE_RCAR is kept so that arm64 defconfig change can be a separate patch. With this patch both config options PCIE_RCAR and PCIE_RCAR_HOST will be available but PCIE_RCAR internally selects PCIE_RCAR_HOST so that bisect builds wont be affected. Link: https://lore.kernel.org/r/1588854799-13710-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-11PCI: tegra: Fix reporting GPIO error valuePali Rohár
Error code is stored in rp->reset_gpio and not in err variable. Link: https://lore.kernel.org/r/20200414102512.27506-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org>
2020-05-07PCI: rcar: Add suspend/resumeKazufumi Ikeda
Add suspend/resume support for rcar. The resume handler reprograms the hardware based on the software state kept in specific device structures, so there is no need to save registers on suspend. Link: https://lore.kernel.org/r/20200314191232.3122290-1-marek.vasut@gmail.com Link: https://lore.kernel.org/r/20200426123148.56051-1-marek.vasut@gmail.com Signed-off-by: Kazufumi Ikeda <kaz-ikeda@xc.jp.nec.com> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: linux-renesas-soc@vger.kernel.org
2020-05-07PCI: rcar: Fix incorrect programming of OB windowsAndrew Murray
The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between a CPU address (which is determined by the window number 'x') and a programmed PCI address - Thus allowing the controller to translate CPU accesses into PCI accesses. However the existing code incorrectly writes the CPU address - lets fix this by writing the PCI address instead. For memory transactions, existing DT users describe a 1:1 identity mapping and thus this change should have no effect. However the same isn't true for I/O. Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-05-07PCI: host-generic: Eliminate pci_host_common_probe wrappersRob Herring
Most ECAM host drivers are just different pci_ecam_ops which can be DT match table data. That's already the case in some cases, but let's do that for all the ECAM drivers. Then we can use of_device_get_match_data() in pci_host_common_probe() and eliminate the probe wrapper functions and use pci_host_common_probe() directly for probe. Link: https://lore.kernel.org/r/20200409234923.21598-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
2020-05-05PCI: altera: Clean up indentation issue on a return statementColin Ian King
A return statment is indented incorrectly, remove extraneous space. Link: https://lore.kernel.org/r/20200327134556.265411-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-05PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling pathsChristophe JAILLET
If we fails somewhere in 'v3_pci_probe()', we need to free 'host'. Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver. Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-05PCI: dwc: Make hisi_pcie_platform_ops staticZou Wei
Fix the following sparse warning: drivers/pci/controller/dwc/pcie-hisi.c:365:21: warning: symbol 'hisi_pcie_platform_ops' was not declared. Should it be static? Link: https://lore.kernel.org/r/1587611883-26960-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
2020-05-05PCI: dwc: Clean up computing of msix_tblJiri Slaby
Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") overcomplicated the computation of the msix_tbl address. Simplify it as it's simply the addr + offset. Provided addr is (void *) already. objdump -d shows no difference after this patch. Link: https://lore.kernel.org/r/20200420065227.4920-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-01PCI: host-generic: Support building as modulesRob Herring
Enable building host-generic and its host-common dependency as a module. Link: https://lore.kernel.org/r/20200409234923.21598-3-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
2020-05-01PCI: Constify struct pci_ecam_opsRob Herring
struct pci_ecam_ops is typically DT match table data which is defined to be const. It's also best practice for ops structs to be const. Ideally, we'd make struct pci_ops const as well, but that becomes pretty invasive, so for now we just cast it where needed. Link: https://lore.kernel.org/r/20200409234923.21598-2-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Robert Richter <rrichter@marvell.com> Cc: Toan Le <toan@os.amperecomputing.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Cc: linux-acpi@vger.kernel.org
2020-04-24PCI: keystone: Don't select CONFIG_PCI_KEYSTONE_HOST by defaultBjorn Helgaas
Drivers should not be selected by default because that bloats the kernel for people who don't need them. Remove the "default y" for CONFIG_PCI_KEYSTONE_HOST. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: linux-arm-kernel@lists.infradead.org
2020-04-24PCI: dra7xx: Don't select CONFIG_PCI_DRA7XX_HOST by defaultBjorn Helgaas
Drivers should not be selected by default because that bloats the kernel for people who don't need them. Enable CONFIG_PCI_DRA7XX_HOST by default only if SOC_DRA7XX. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-omap@vger.kernel.org
2020-04-23PCI: hv: Prepare hv_compose_msi_msg() for the ↵Andrea Parri (Microsoft)
VMBus-channel-interrupt-to-vCPU reassignment functionality The current implementation of hv_compose_msi_msg() is incompatible with the new functionality that allows changing the vCPU a VMBus channel will interrupt: if this function always calls hv_pci_onchannelcallback() in the polling loop, the interrupt going to a different CPU could cause hv_pci_onchannelcallback() to be running simultaneously in a tasklet, which will break. The current code also has a problem in that it is not synchronized with vmbus_reset_channel_cb(): hv_compose_msi_msg() could be accessing the ring buffer via the call of hv_pci_onchannelcallback() well after the time that vmbus_reset_channel_cb() has finished. Fix these issues as follows. Disable the channel tasklet before entering the polling loop in hv_compose_msi_msg() and re-enable it when done. This will prevent hv_pci_onchannelcallback() from running in a tasklet on a different CPU. Moreover, poll by always calling hv_pci_onchannelcallback(), but check the channel callback function for NULL and invoke the callback within a sched_lock critical section. This will prevent hv_compose_msi_msg() from accessing the ring buffer after vmbus_reset_channel_cb() has acquired the sched_lock spinlock. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: <linux-pci@vger.kernel.org> Link: https://lore.kernel.org/r/20200406001514.19876-8-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-02Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Convert tegra to use shared DT "ranges" parsing (Rob Herring) * remotes/lorenzo/pci/tegra: PCI: tegra: Use pci_parse_request_of_pci_ranges()
2020-04-02Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Apply Qualcomm class fixup only to PCIe host bridges, not to all PCI_VENDOR_ID_QCOM devices (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM
generated by cgit (git 2.34.1) at 2025-07-18 11:01:08 +0000