summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)Author
2023-04-11PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2Manivannan Sadhasivam
All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-10-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0Manivannan Sadhasivam
All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-9-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0Manivannan Sadhasivam
All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. While at it, let's also move the qcom_pcie_resources_2_1_0 struct below qcom_pcie_resources_1_0_0 to keep it sorted. Link: https://lore.kernel.org/r/20230316081117.14288-8-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Use lower case for hexManivannan Sadhasivam
To maintain uniformity, let's use lower case for representing hexadecimal numbers. Link: https://lore.kernel.org/r/20230316081117.14288-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Add missing macros for register fieldsManivannan Sadhasivam
Some of the registers are changed using hardcoded bitfields without macros. This provides no information on what the register setting is about. So add the macros to those fields for making the code more understandable. Link: https://lore.kernel.org/r/20230316081117.14288-6-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Use bitfield definitions for register fieldsManivannan Sadhasivam
To maintain uniformity throughout the driver and also to make the code easier to read, let's make use of bitfield definitions for register fields. Link: https://lore.kernel.org/r/20230316081117.14288-5-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Sort and group registers and bitfield definitionsManivannan Sadhasivam
Sorting the registers and their bit definitions will make it easier to add more definitions in the future and it also helps in maintenance. While at it, let's also group the registers and bit definitions separately as done in the pcie-qcom-ep driver. Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Remove PCIE20_ prefix from register definitionsManivannan Sadhasivam
The PCIE part is redundant and 20 doesn't represent anything across the SoCs supported now. So let's get rid of the prefix. This involves adding the IP version suffix to one definition of PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version. The other definition is generic for the rest of the versions. Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere, hence removed. Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11PCI: qcom: Fix the incorrect register usage in v2.7.0 configManivannan Sadhasivam
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect register usage which is modifying a different register. Also in this IP version, this register change doesn't depend on MSI being enabled. So remove that check also. Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> # 5.6+
2023-03-24PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macroPali Rohár
Simplify pci-ixp4xx.c driver code and use new PCI_CONF1_ADDRESS() macro for accessing PCI config space. Link: https://lore.kernel.org/r/20220928122539.15116-1-pali@kernel.org Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-03-24PCI: mt7621: Use dev_info() to log PCIe card detectionSergio Paracuellos
When there is no card plugged on a PCIe port a log reporting that the port will be disabled is flagged as an error (dev_err()). Since this is not an error at all, change the log level by using dev_info() instead. Link: https://lore.kernel.org/r/20230324073733.1596231-1-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-03-24PCI: imx6: Install the fault handler only on compatible matchH. Nikolaus Schaller
commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") added a fault hook to this driver in the probe function. So it was only installed if needed. commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") moved it from probe to driver init which installs the hook unconditionally as soon as the driver is compiled into a kernel. When this driver is compiled as a module, the hook is not registered until after the driver has been matched with a .compatible and loaded. commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling") extended the fault handling code. commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") added some protection for non-ARM architectures, but this does not protect non-i.MX ARM architectures. Since fault handlers can be triggered on any architecture for different reasons, there is no guarantee that they will be triggered only for the assumed situation, leading to improper error handling (i.MX6-specific imx6q_pcie_abort_handler) on foreign systems. I had seen strange L3 imprecise external abort messages several times on OMAP4 and OMAP5 devices and couldn't make sense of them until I realized they were related to this unused imx6q driver because I had CONFIG_PCI_IMX6=y. Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed to run on different ARM SoC and be differentiated only by device tree binaries. So turning off CONFIG_PCI_IMX6 is not a solution. Therefore we check the compatible in the init function before registering the fault handler. Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling") Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
2023-03-21PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabledYoshihiro Shimoda
If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val' is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization. Commit ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") did not account for further usage of 'val', so we wrote improper values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled. Move the PCIE_PORT_LINK_CONTROL update to be completely after the PCIE_PL_CHK_REG_CONTROL_STATUS register initialization. [bhelgaas: commit log adapted from Serge's version] Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-03-17PCI: layerscape: Add EP mode support for ls1028aXiaowei Bao
Add PCIe EP mode support for ls1028a. Link: https://lore.kernel.org/r/20230209151050.233973-1-Frank.Li@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-03-10PCI: rcar: Avoid defines prefixed with CONFIGLukas Bulwahn
Defines prefixed with "CONFIG" should be limited to proper Kconfig options, that are introduced in a Kconfig file. In the R-car driver the bitmask to configure the SEND_ENABLE mode is named CONFIG_SEND_ENABLE. Rename this local definition to a more suitable name, containing the register bitfield name defined in the R-Car Gen3 rev. 2.30 user manual. No functional change. Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> [lpieralisi@kernel.org: Changed define naming and commit log] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10PCI: kirin: Select REGMAP_MMIOJosh Triplett
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces a linker failure looking for __devm_regmap_init_mmio_clk(). Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett <josh@joshtriplett.org> [lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org # 5.16+
2023-02-24Merge tag 'phy-for-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
2023-02-24Merge tag 'pci-v6.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...
2023-02-22Merge branch 'pci/misc'Bjorn Helgaas
- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap) - Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang) - Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh) * pci/misc: PCI: hv: Drop duplicate PCI_MSI dependency PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc misc: pci_endpoint_test: Drop initial kernel-doc marker
2023-02-22Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Add pci_enable_link_state() to allow drivers to enable ASPM link state (Michael Bottini) - Add quirk to enable all ASPM link states and program LTR for devices below VMD (David E. Box) * pci/controller/vmd: PCI: vmd: Add quirk to configure PCIe ASPM and LTR PCI: vmd: Create feature grouping for client products PCI: vmd: Use PCI_VDEVICE in device list PCI/ASPM: Add pci_enable_link_state()
2023-02-22Merge branch 'pci/controller/qcom'Bjorn Helgaas
- Add DT compatible for qcom MSM8998 (Krzysztof Kozlowski) - Unify qcom MSM8996 and MSM8998 clock orderings (Krzysztof Kozlowski) - Correct qcom,perst-regs (Krzysztof Kozlowski) - Add qcom SM8350 DT binding and driver support (Dmitry Baryshkov) - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors (Johan Hovold) - Add IPQ8074 Gen3 port DT binding and driver support (the Gen2 port was already supported) (Robert Marko) * pci/controller/qcom: PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order dt-bindings: PCI: qcom: Add MSM8998 specific compatible dt-bindings: PCI: qcom: Add oneOf to compatible match
2023-02-22Merge branch 'pci/controller/mvebu'Bjorn Helgaas
- Mark mvebu driver as broken (Pali Rohár) * pci/controller/mvebu: PCI: mvebu: Mark driver as BROKEN
2023-02-22Merge branch 'pci/controller/mt7621'Bjorn Helgaas
- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT WF3526-P and some Netgear models (Sergio Paracuellos) * pci/controller/mt7621: PCI: mt7621: Delay phy ports initialization
2023-02-22Merge branch 'pci/controller/imx6'Bjorn Helgaas
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support (Richard Zhu) * pci/controller/imx6: PCI: imx6: Add i.MX8MP PCIe EP support PCI: imx6: Add i.MX8MM PCIe EP support PCI: imx6: Add i.MX8MQ PCIe EP support PCI: imx6: Add i.MX PCIe EP mode support misc: pci_endpoint_test: Add i.MX8 PCIe EP device support dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string
2023-02-22Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge Semin) - Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative addresses to PCI bus addresses (Serge Semin) - Fix missing src/dst address for interleaved transfers (Serge Semin) - Enforce the DW eDMA restriction that interleaved transfers must increment src and dst addresses (Serge Semin) - Fix some invalid interleaved transfer semantics (Serge Semin) - Convert CPU-relative addresses to PCI bus addresses for eDMA engine (Serge Semin) - Drop chancnt initialization from dw-edma-core, since it is managed by the dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin) - Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin) - Ignore debugfs file/directory creation errors (Serge Semin) - Allocate debugfs entries from the heap to prepare for multi-eDMA platforms (Serge Semin) - Simplify and rework register accessors to remove another obstacle to multi-eDMA platforms (Serge Semin) - Consolidate eDMA read/write channels in a single dma_device to simplify, better reflect the hardware design, and avoid a debugfs complaint (Serge Semin) - Move eDMA-specific debugfs nodes into existing dmaengine subdirectory (Serge Semin) - Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin) - Use existing readq()/writeq rather than hand-coding new ones (Serge Semin) - Drop unnecessary data target region allocation in favor of existing dw_edma_chip members (Serge Semin) - Use parent device in eDMA controller name to prepare for multi-eDMA platforms (Serge Semin) - In addition to the existing MMIO accessors for linked list entries, add support for ioremapped entries for use by eDMA in Root Ports or local Endpoints (Serge Semin) - Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it (Serge Semin) - Allow DWC drivers to set streaming DMA masks larger than 32 bits; previously both streaming and coherent DMA were limited to 32 bits because some PCI devices only support coherent 32-bit DMA for MSI (Serge Semin) - Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge Semin) - Add DW Root Port and Endpoint controller support for eDMA (Serge Semin) * pci/controller/dwc: PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support dmaengine: dw-edma: Skip cleanup procedure if no private data found dmaengine: dw-edma: Replace chip ID number with device name dmaengine: dw-edma: Drop DT-region allocation dmaengine: dw-edma: Use non-atomic io-64 methods dmaengine: dw-edma: Fix readq_ch() return value truncation dmaengine: dw-edma: Use DMA engine device debugfs subdirectory dmaengine: dw-edma: Join read/write channels into a single device dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor dmaengine: dw-edma: Simplify debugfs context CSRs init procedure dmaengine: dw-edma: Rename debugfs dentry variables to 'dent' dmaengine: dw-edma: Convert debugfs descs to being heap-allocated dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor dmaengine: dw-edma: Stop checking debugfs_create_*() return value dmaengine: dw-edma: Drop unnecessary debugfs reg casts dmaengine: dw-edma: Drop chancnt initialization dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver dmaengine: dw-edma: Add CPU to PCI bus address translation dmaengine: dw-edma: Fix invalid interleaved xfers semantics dmaengine: dw-edma: Don't permit non-inc interleaved xfers dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address dmaengine: dw-edma: Release requested IRQs on failure dmaengine: Fix dma_slave_config.dst_addr description
2023-02-22Merge branch 'pci/endpoint'Bjorn Helgaas
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam) - Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan Sadhasivam) - Add a separate lock for the endpoint pci_epf list to avoid deadlock while running callbacks (Manivannan Sadhasivam) - Use callbacks instead of notifier chains to signal events from EPC to EPF drivers (Manivannan Sadhasivam) - Use link_up() callback in place of LINK_UP notifier (Manivannan Sadhasivam) * pci/endpoint: PCI: endpoint: Use link_up() callback in place of LINK_UP notifier PCI: endpoint: Use callback mechanism for passing events from EPC to EPF PCI: endpoint: Use a separate lock for protecting epc->pci_epf list PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
2023-02-22Merge branch 'pci/kbuild'Bjorn Helgaas
- Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe will complain about them (Nick Alcock) * pci/kbuild: PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
2023-02-22PCI: dwc: Add Root Port and Endpoint controller eDMA engine supportSerge Semin
Since the DW eDMA core now supports eDMA controllers embedded in locally accessible DW PCIe Root Ports and Endpoints, register these controllers when possible. To do that the DW PCIe core driver needs to perform some preparations first. First of all, it needs to find the eDMA controller CSRs base address, whether they are accessible over the Port Logic or iATU unrolled space. Afterwards it can try to auto-detect the eDMA controller availability and number of read/write channels. If none are found the procedure silently returns without error. Secondly, the platform is supposed to provide either combined or per-channel IRQ signals. If no valid IRQs set is found, the procedure returns without error to be backward compatible with platforms where DW PCIe controllers have eDMA but lack the IRQ description. Finally, before actually probing the eDMA device we need to allocate LLP items buffers. After that the DW eDMA can be registered. If registration is successful, a message regarding the number of detected Read/Write eDMA channels will be printed to the system as is done for the iATU settings. Note: the DW PCI controller driver (either host or endpoint mode) is currently always built-in, so if the DW eDMA core is built as a module (CONFIG_DW_EDMA=m), eDMA controllers will not be registered even if the dw-edma module is later loaded. Link: https://lore.kernel.org/r/20230113171409.30470-28-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
2023-02-22PCI: bt1: Set 64-bit DMA maskSerge Semin
The DW PCIe Root Port IP core is synthesized with the 64-bit AXI address bus. Since the device is also equipped with the eDMA engine, explicitly set the device DMA mask so DMA engine clients can allocate data buffers anywhere in the 64-bit memory space. Link: https://lore.kernel.org/r/20230113171409.30470-27-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-22PCI: dwc: Restrict only coherent DMA mask for MSI address allocationSerge Semin
The MSI target address must be in the lowest 4GB memory to support PCI peripherals without 64-bit MSI support. Since the allocation is done from DMA coherent memory, set only the coherent DMA mask, leaving the streaming DMA mask alone. Thus streaming DMA operations will work with no artificial limitations. It will be specifically useful for the eDMA-capable controllers so the corresponding DMA engine clients would map the DMA buffers with no need for SWIOTLB for buffers allocated above 4GB. Add a brief comment about the reason allocating the MSI target address below 4GB. Link: https://lore.kernel.org/r/20230113171409.30470-26-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2023-02-21Merge tag 'hyperv-next-signed-20230220' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor
2023-02-21Merge tag 'rcu.2023.02.10a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...
2023-02-17PCI: Remove MODULE_LICENSE so boolean drivers don't look like modulesNick Alcock
Since 8b41fc4454e3 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, MODULE_LICENSE in non-modules causes modprobe to misidentify the object file as a module when it is not, and modprobe might succeed rather than failing with a suitable error message. For tristate modules that can be either built-in or loaded at runtime, modprobe succeeds in both cases: # modprobe ext4 [exit status zero if CONFIG_EXT4_FS=y or =m] For boolean modules like the Standard Hot Plug Controller driver (shpchp) that cannot be loaded at runtime, modprobe should always fail like this: # modprobe shpchp modprobe: FATAL: Module shpchp not found in directory /lib/modules/... [exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC] but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so "modprobe shpchp" silently succeeded when it should have failed. Remove MODULE_LICENSE in files that cannot be built as modules. [bhelgaas: commit log, squash] Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/ Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Rob Herring <robh@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-16PCI: hv: Drop duplicate PCI_MSI dependencyLukas Bulwahn
Commit a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed PCI_MSI_IRQ_DOMAIN and made all previous references to it refer to PCI_MSI instead. PCI_HYPERV_INTERFACE already depended on PCI_MSI && PCI_MSI_IRQ_DOMAIN, so we ended up with a redundant dependency on PCI_MSI && PCI_MSI. Drop the duplicate. No functional change. Just a stylistic clean-up. Link: https://lore.kernel.org/r/20221215101310.9135-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-14PCI: qcom: Add IPQ8074 Gen3 port supportRobert Marko
IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. Add compatible for Gen3 port which uses the same controller as IPQ6018. Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-14PCI: qcom: Fix host-init error handlingJohan Hovold
Implement the new host_deinit() callback so that the PHY is powered off and regulators and clocks are disabled also on late host-init errors. Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-02-14PCI: qcom: Add SM8350 supportDmitry Baryshkov
Add support for the PCIe host on Qualcomm SM8350 platform. Link: https://lore.kernel.org/r/20221118233242.2904088-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
2023-02-14PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handlerManivannan Sadhasivam
dw_pcie_ep_linkup() may take more time to execute depending on the EPF driver implementation. Calling this API in the hard IRQ handler is not encouraged since the hard IRQ handlers are supposed to complete quickly. So move the dw_pcie_ep_linkup() call to threaded IRQ handler. Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2023-02-14PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQManivannan Sadhasivam
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the execution of dw_pcie_ep_linkup() depends on the EPF driver and may take more time depending on the EPF implementation. In general, hard IRQ handlers are supposed to return quickly and not block for so long. Moreover, there is no real need of the current IRQ handler to be a hard IRQ handler. So switch to the threaded IRQ handler for the "dra7xx-pcie-main" IRQ. Link: https://lore.kernel.org/linux-pci/20230124071158.5503-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2023-02-13PCI: loongson: Add more devices that need MRRS quirkHuacai Chen
Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS quirk. Add them. Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-09PCI: mvebu: Mark driver as BROKENPali Rohár
People are reporting that pci-mvebu.c driver does not work with recent mainline kernel. There are more bugs which prevents its for daily usage. So lets mark it as broken for now, until somebody would be able to fix it in mainline kernel. Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-03PCI: mt7621: Delay phy ports initializationSergio Paracuellos
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need to delay phy port initialization after calling the mt7621_pcie_init_port() driver function to get into reliable boots for both warm and hard resets. The delay required to detect the ports seems to be in the range [75-100] milliseconds. If the ports are not detected the controller is not functional. There is no datasheet or something similar to really understand why this extra delay is needed only for these devices and it is not for most of the boards that are built on mt7621 SoC. This issue has been reported by openWRT community and the complete discussion is in [0]. The 100 milliseconds delay has been tested in all devices to validate it. Add the extra 100 milliseconds delay to fix the issue. [0]: https://github.com/openwrt/openwrt/pull/11220 Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-03PCI: tegra: Convert to devm_of_phy_optional_get()Geert Uytterhoeven
Use the new devm_of_phy_optional_get() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/56508eeadf7fa8692877e872871f10294d48c49d.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-02drivers/pci/controller: Remove "select SRCU"Paul E. McKenney
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: "Krzysztof Wilczyński" <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: <linux-pci@vger.kernel.org> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: John Ogness <john.ogness@linutronix.de>
2023-02-02PCI: vmd: Add quirk to configure PCIe ASPM and LTRDavid E. Box
PCIe ports reserved for VMD use are not visible to BIOS and therefore not configured to enable PCIe ASPM or LTR values (which BIOS will configure if they are not set). Lack of this programming results in high power consumption on laptops as reported in bugzilla. For affected products use pci_enable_link_state to set the allowed link states for devices on the root ports. Also set the LTR value to the maximum value needed for the SoC. This is a workaround for products from Rocket Lake through Alder Lake. Raptor Lake, the latest product at this time, has already implemented LTR configuring in BIOS. Future products will move ASPM configuration back to BIOS as well. As this solution is intended for laptops, support is not added for hotplug or for devices downstream of a switch on the root port. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063 Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717 Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02PCI: vmd: Create feature grouping for client productsDavid E. Box
Simplify the device ID list by creating a grouping of features shared by client products. Suggested-by: Jon Derrick <jonathan.derrick@linux.dev> Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02PCI: vmd: Use PCI_VDEVICE in device listDavid E. Box
Use PCI_VDEVICE to simplify the device table. Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-01PCI: loongson: Prevent LS7A MRRS increasesHuacai Chen
Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-01-17Drivers: hv: Make remove callback of hyperv driver void returnedDawei Li
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for Hyper-V VMBus based drivers to return void. Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-16PCI: imx6: Add i.MX8MP PCIe EP supportRichard Zhu
Add the i.MX8MP PCIe EP support. Link: https://lore.kernel.org/r/1673847684-31893-15-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 14:37:35 +0000