summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)Author
2022-08-23PCI: mvebu: Fix endianness when accessing PCI emul bridge membersPali Rohár
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase are of type __le16, so correctly access these members using le16_to_cpu() macros. Link: https://lore.kernel.org/r/20220812141115.24082-1-pali@kernel.org Fixes: e7a01876729c ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-23PCI: qcom: Sort device-id tableJohan Hovold
Sort the device-id table entries alphabetically by compatible string to make it easier to find entries and add new ones. Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Clean up IP configurationsJohan Hovold
The various IP versions have different configurations that are encoded in separate sets of operation callbacks. Currently, there is no need for also maintaining corresponding sets of data parameters, but it is conceivable that these may again be found useful (e.g. to implement minor variations of the operation callbacks). Rename the default configuration structures after the IP version they apply to so that they can more easily be reused by different SoCs. Note that SoC specific configurations can be added later if need arises (e.g. cfg_sc8280xp). Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Make all optional clocks optionalJohan Hovold
The kernel is not a devicetree validator and does not need to re-encode information which is already available in the devicetree. This is specifically true for the optional PCIe clocks, some of which are really interconnect clocks. Treat also the 2.7.0 optional clocks as truly optional instead of maintaining a list of clocks per compatible (including two compatible strings for the two identical controllers on sm8450) just to validate the devicetree. Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SA8540PJohan Hovold
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops. Note that like for SC8280XP, the SA8540P controllers need two or three interconnect clocks to be enabled. Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SC8280XPJohan Hovold
The SC8280XP platform has seven PCIe controllers: two used with USB4, two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0 ops. Note that the SC8280XP controllers need two or three interconnect clocks to be enabled. Model these as optional clocks to avoid encoding devicetree data in the PCIe driver. Note that the same could be done for the SM8450 interconnect clocks and possibly also for the TBU clocks. Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-13Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-09PCI: designware-ep: Allow pci_epc_set_bar() update inbound map addressFrank Li
ntb_mw_set_trans() will set memory map window after endpoint function driver bind. The inbound map address need be updated dynamically when using NTB by PCIe Root Port and PCIe Endpoint connection. Checking if iatu already assigned to the BAR, if yes, using assigned iatu number to update inbound address map and skip set BAR's register. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-04Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge branch 'pci/misc'Bjorn Helgaas
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset (Bjorn Helgaas) - Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors (Pali Rohár) * pci/misc: PCI/ACPI: Update link to PCI firmware specification PCI: Drop of_match_ptr() to avoid unused variables
2022-08-04Merge branch 'pci/ctrl/pm-ops'Bjorn Helgaas
- Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP" or "__maybe_unused" (Bjorn Helgaas) * pci/ctrl/pm-ops: PCI: Convert to new *_PM_OPS macros
2022-08-04Merge branch 'pci/ctrl/xilinx-cpm'Bjorn Helgaas
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada) * pci/ctrl/xilinx-cpm: MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers PCI: xilinx-cpm: Add support for Versal CPM5 Root Port dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
2022-08-04Merge branch 'pci/ctrl/vmd'Bjorn Helgaas
- Use devm_kasprintf() instead of simple kasprintf() (Subramanian Mohan) - Add [8086:7D0B] and [8086:AD0B] devices to VMD driver (Francisco Munoz) * pci/ctrl/vmd: PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs PCI: vmd: Use devm_kasprintf() instead of simple kasprintf()
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-08-04Merge branch 'pci/ctrl/rcar-gen2'Bjorn Helgaas
- Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding (Herve Codina) - Add Renesas RZ/N1D compatible string ("renesas,pci-rzn1") to rcar-gen2 driver (Herve Codina) * pci/ctrl/rcar-gen2: PCI: rcar-gen2: Add RZ/N1 SOC family compatible string dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032 dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-08-04Merge branch 'pci/ctrl/microchip'Bjorn Helgaas
- Fix refcount leak in mc_pcie_init_irq_domains() (Miaoqian Lin) * pci/ctrl/microchip: PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()
2022-08-04Merge branch 'pci/ctrl/mediatek-gen3'Bjorn Helgaas
- Fix refcount leak in mtk_pcie_init_irq_domains() (Miaoqian Lin) - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) * pci/ctrl/mediatek-gen3: PCI: mediatek-gen3: Print LTSSM state when PCIe link down PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()
2022-08-04Merge branch 'pci/ctrl/mediatek'Bjorn Helgaas
- Add Airoha EN7532 to DT binding (John Crispin) - Allow building of mediatek driver for ARCH_AIROHA (Felix Fietkau) * pci/ctrl/mediatek: PCI: mediatek: Allow building for ARCH_AIROHA dt-bindings: PCI: mediatek: Add Airoha EN7532 support
2022-08-04Merge branch 'pci/ctrl/loongson'Bjorn Helgaas
- Wrap ARM64-specific MCFG quirks in #ifdef so Loongson can use the file (Huacai Chen) - Use generic (not 32-bit only) config accesses for LS2K/LS7A (Huacai Chen) - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) * pci/ctrl/loongson: PCI: loongson: Work around LS7A incorrect Interrupt Pin registers PCI: loongson: Don't access non-existent devices PCI: loongson: Add ACPI init support PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A PCI/ACPI: Guard ARM64-specific mcfg_quirks
2022-08-04Merge branch 'pci/ctrl/iproc'Bjorn Helgaas
- Use bitmap API to allocate bitmaps instead of doing it by hand (Christophe JAILLET) * pci/ctrl/iproc: PCI: iproc: Use bitmap API to allocate bitmaps
2022-08-04Merge branch 'pci/ctrl/imx6'Bjorn Helgaas
- Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
2022-08-04Merge branch 'pci/ctrl/fu740'Bjorn Helgaas
- Remove unnecessary include files (Bjorn Helgaas) * pci/ctrl/fu740: PCI: fu740: Remove unnecessary include files
2022-08-04Merge branch 'pci/ctrl/exynos'Bjorn Helgaas
- Move samsung phy-exynos-pcie init all to exynos5433_pcie_phy_init() instead of splitting across phy_init() and phy_power_on() (Marek Szyprowski) - Call phy_init() before phy_power_on() for samsung phy-exynos-pcie, as required by the PHY programming model (Marek Szyprowski) * pci/ctrl/exynos: PCI: exynos: Correct generic PHY usage phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks
2022-08-04Merge branch 'pci/ctrl/dwc'Bjorn Helgaas
- Stop link on host_init errors and de-initialization (Serge Semin) - Add support for unrolled iATU register space in dw_pcie_disable_atu() (Serge Semin) - Disable outbound windows only for controllers that use iATU (Serge Semin) - Set INCREASE_REGION_SIZE flag based on limit address, not on the size, since even a small size may cross a 4GB boundary (Serge Semin) - Deallocate EPC memory on dw_pcie_ep_init() errors to avoid a leak (Serge Semin) - Always enable CDM check if "snps,enable-cdm-check" exists instead of exiting early if the optional "num-lanes" was absent (Serge Semin) - Simplify detection of whether we're using unrolled iATU registers (Serge Semin) - Make dw_pcie_link_up() more generic by using dw_pcie_readl_dbi() instead of readl() (Serge Semin) - Add dw_pcie_start_link() and dw_pcie_stop_link() wrappers to factor out checks for ops being implemented (Serge Semin) - Move io_cfg_atu_shared to struct pcie_port and rename to cfg0_io_shared, since it's not used by dwc common code or dwc endpoint code (Serge Semin) - Rename struct pcie_port to dw_pcie_rp to indicate that it's DesignWare-specific (Serge Semin) - Drop unused struct dw_plat_pcie regmap pointer (Serge Semin) - Fix some coding style issues (Serge Semin) - Log link speed and width if it comes up (Serge Semin) - Save DWC IP core version in native format as read from PORT_LOGIC.PCIE_VERSION_OFF register (Serge Semin) - Read DWC IP core version from PORT_LOGIC.PCIE_VERSION_OFF (Serge Semin) - Add macros to compare Synopsys IP core versions (Serge Semin) - Drop manual DWC IP core version setup from intel-gw and tegra194 (Serge Semin) - Add dw_pcie_ops.host_deinit() callback (Serge Semin) - Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO (Serge Semin) - Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB (Serge Semin) - Simplify in/outbound iATU setup methods and reduce duplicated code (Serge Semin) - Detect iATU region size from hardware (Serge Semin) - Validate iATU outbound mappings against hardware constraints (Serge Semin) - Check for errors in iATU setup (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Use the bitmap API to allocate bitmaps instead of open-coding it (Christophe JAILLET) - Correct dw_pcie_free_msi() checking for when to remove IRQ handler and data (Dmitry Baryshkov) - Split MSI init to new dw_pcie_msi_host_init() function (Dmitry Baryshkov) - Convert struct pcie_port.msi_irq to an array so we can support more than 32 MSI interrupts (Dmitry Baryshkov) - Handle MSIs routed to multiple GIC interrupts for Qualcomm platforms with groups of 32 MSI vectors (Dmitry Baryshkov) - Add additional MSI interrupts to qcom DT (Dmitry Baryshkov) * pci/ctrl/dwc: dt-bindings: PCI: qcom: Support additional MSI vectors PCI: dwc: Handle MSIs routed to multiple GIC interrupts PCI: dwc: Convert struct pcie_port.msi_irq to an array PCI: dwc: Split MSI IRQ parsing/allocation to a separate function PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() PCI: dwc: Use the bitmap API to allocate bitmaps PCI: dwc: Fix MSI msi_msg DMA mapping PCI: dwc: Check iATU in/outbound range setup status PCI: dwc: Validate iATU outbound mappings against hardware constraints PCI: dwc: Add iATU regions size detection procedure PCI: dwc: Simplify in/outbound iATU setup methods PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO PCI: dwc: Add dw_pcie_ops.host_deinit() callback PCI: tegra194: Drop manual DW PCIe controller version setup PCI: intel-gw: Drop manual DW PCIe controller version setup PCI: dwc: Add macros to compare Synopsys IP core versions PCI: dwc: Read DWC IP core version from register PCI: dwc: Use native DWC IP core version representation PCI: dwc: Detect iATU settings after getting "addr_space" resource PCI: dwc: Log link speed and width if it comes up PCI: dwc-plat: Drop dw_plat_pcie_of_match[] forward declaration PCI: dwc-plat: Drop unused regmap pointer PCI: dwc-plat: Simplify dw_plat_pcie_probe() return values PCI: dwc: Rename struct pcie_port to dw_pcie_rp PCI: dwc: Move io_cfg_atu_shared to struct pcie_port PCI: dwc: Add start_link/stop_link inlines PCI: dwc: Reuse local pointer to the resource data PCI: dwc: Organize local variable usage PCI: dwc: Convert dw_pcie_link_up() to use dw_pcie_readl_dbi() PCI: dwc: Simplify unrolled iATU detection PCI: dwc: Add newlines to log messages PCI: dwc: Add braces to multi-line if-else statements PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address PCI: dwc: Disable outbound windows only for controllers using iATU PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu() PCI: dwc: Stop link on host_init errors and de-initialization
2022-08-04Merge branch 'pci/ctrl/brcmstb'Bjorn Helgaas
- Remove unnecessary forward declarations (Jim Quinlan) - Prevent config space access when link is down (Jim Quinlan) - Split post-link up initialization to brcm_pcie_start_link() (Jim Quinlan) - Enable child bus device regulators described under Root Ports in DT (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) - Rename .map_bus() functions to end with 'map_bus' as they do in other drivers (Jim Quinlan) * pci/ctrl/brcmstb: PCI: brcmstb: Rename .map_bus() functions to end with 'map_bus' PCI: brcmstb: Disable/enable regulators in suspend/resume PCI: brcmstb: Enable child bus device regulators from DT PCI: brcmstb: Split post-link up initialization to brcm_pcie_start_link() PCI: brcmstb: Prevent config space access when link is down PCI: brcmstb: Remove unnecessary forward declarations
2022-08-01PCI: imx6: Support more than Gen2 speed link modeRichard Zhu
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to Gen3 link speed. Link: https://lore.kernel.org/r/1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registersRichard Zhu
The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers. To make sure that the DBI registers are writable, set the PCIE_DBI_RO_WR_EN properly when writing the DBI registers. Link: https://lore.kernel.org/r/1652866528-13220-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reformat suspend callback to keep symmetric with resumeRichard Zhu
Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions. Encapsulate clocks, regulators disables and PHY uninitialization into imx6_pcie_host_exit(). To keep suspend/resume symmetric as much as possible, invoke these two new created functions in suspend callback. To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable() to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move the imx6_pcie_ltssm_disable() earlierRichard Zhu
Move the imx6_pcie_ltssm_disable() earlier and place it just behind the imx6_pcie_ltssm_enable(), since it might not be only used by suspend callback directly. To be symmetric with imx6_pcie_ltssm_enable(), add the IMX6Q and IMX8MQ switch cases in imx6_pcie_ltssm_disable(). Link: https://lore.kernel.org/r/1657783869-19194-17-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Disable clocks in reverse order of enableBjorn Helgaas
imx6_pcie_clk_enable() enables clocks in the order: pcie_phy pcie_bus pcie imx6_pcie_enable_ref_clk Change imx6_pcie_clk_disable() to disable them in the reverse order. Link: https://lore.kernel.org/r/1657783869-19194-16-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Do not hide PHY driver callbacks and refine the error handlingRichard Zhu
Move the phy_power_on() to host_init from imx6_pcie_clk_enable(). Move the phy_init() to host_init from imx6_pcie_deassert_core_reset(). Refine the error handling in imx6_pcie_host_init() accordingly. Link: https://lore.kernel.org/r/1657783869-19194-15-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reduce resume time by only starting link if it was up before suspendRichard Zhu
i.MX PCIe doesn't support hotplug. During resume, only start PCIe link training when the link was up before system suspend to avoid the long latency in the link training period. Link: https://lore.kernel.org/r/1657783869-19194-14-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Mark the link down as non-fatal errorRichard Zhu
If the PCIe link is down, return zero from imx6_pcie_start_link() so the driver will probe successfully. Link: https://lore.kernel.org/r/1657783869-19194-13-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()Richard Zhu
Move regulator enable out of imx6_pcie_deassert_core_reset(), since the regulator_enable() has nothing to do with imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-12-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Turn off regulator when system is in suspend modeRichard Zhu
The driver should undo any enables it did itself. The regulator disable shouldn't be basing decisions on regulator_is_enabled(). Move the regulator_disable to the suspend function, turn off regulator when the system is in suspend mode. Link: https://lore.kernel.org/r/1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Call host init function directly in resumeRichard Zhu
Call imx6_pcie_host_init() instead of duplicating codes in resume. Note that this also means we do MPLL setup again during resume, which we didn't do before. [bhelgaas: add MPLL setup note, pointed out by Lucas] Link: https://lore.kernel.org/r/1657783869-19194-10-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Disable i.MX6QDL clock when disabling ref clocksRichard Zhu
When disabling PCIe clocks, disable i.MX6QDL ref clock too. Link: https://lore.kernel.org/r/1657783869-19194-9-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Propagate .host_init() errors to callerRichard Zhu
Since dw_pcie_host_init() checks for errors from ops->host_init(), check for errors when enabling power regulators and clocks and return them. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1657783869-19194-8-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()Richard Zhu
Encapsulate the i.MX PCIe clock enable operations into one standalone function, imx6_pcie_clk_enable(). No functional change intended. [bhelgaas: split pure code moves into separate patches] Link: https://lore.kernel.org/r/1657783869-19194-7-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Factor out ref clock disable to match enableBjorn Helgaas
The PCIe ref clocks are specific to different variants. The enables are already split out into imx6_pcie_enable_ref_clk(), but the disables were combined with the more generic bus/phy/pcie clock disables in imx6_pcie_clk_disable(). Split out the variant-specific disables into imx6_pcie_disable_ref_clk() to match imx6_pcie_enable_ref_clk(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-6-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_clk_disable() earlierRichard Zhu
Move imx6_pcie_clk_disable() earlier to be near other clock-related functions. No functional change intended. [bhelgaas: reorder patch so pure moves are earlier] Link: https://lore.kernel.org/r/1657783869-19194-5-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move imx6_pcie_enable_ref_clk() earlierBjorn Helgaas
Move imx6_pcie_enable_ref_clk() earlier so it's not in the middle between imx6_pcie_assert_core_reset() and imx6_pcie_deassert_core_reset(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-4-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move PHY management functions togetherBjorn Helgaas
Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and imx6_setup_phy_mpll() earlier with other PHY-related code. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlierBjorn Helgaas
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the file since they depend on nothing and are used by several other functions that will be moved earlier. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()Bjorn Helgaas
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() with NOIRQ_SYSTEM_SLEEP_PM_OPS(), which has the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-08-01PCI: exynos: Correct generic PHY usageMarek Szyprowski
The proper initialization for generic PHYs is to call first phy_init(), then phy_power_on(). While touching this, remove the phy_reset() call. It is just a left-over from the obsoleted Exynos5440 support and the current exynos-pcie PHY driver doesn't even support this function. It is also rarely used by other drivers. Link: https://lore.kernel.org/r/20220628220409.26545-2-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-01PCI: dwc: Handle MSIs routed to multiple GIC interruptsDmitry Baryshkov
On some Qualcomm platforms each group of 32 MSI vectors is routed to a separate GIC interrupt. Implement support for such configurations by parsing "msi0" ... "msiX" interrupts and attaching them to the chained handler. Note that if DT doesn't list an array of MSI interrupts and uses a single "msi" IRQ, the driver will limit the number of supported MSI vectors to 32. Link: https://lore.kernel.org/r/20220707134733.2436629-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Convert struct pcie_port.msi_irq to an arrayDmitry Baryshkov
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but they are routed to separate interrupts in groups of 32 vectors. To support this configuration, change the msi_irq field to an array. Let the DWC core handle all interrupts that were set in this array. [bhelgaas: reorder, drop "irq" temporary to make patch cleaner] Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit (git 2.34.1) at 2025-05-16 01:22:43 +0000